openwrtv4/target/linux/imx6/patches-3.10/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch

Subject: [PATCH 2/2] PCI: imx6: Add support for i.MX6 PCIe controller
From: Sean Cross <xobs@kosagi.com>

Add support for the PCIe port present on the i.MX6 family of controllers.
These use the Synopsis Designware core tied to their own PHY.

Signed-off-by: Sean Cross <xobs@kosagi.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/pci/host/Kconfig                           |   6 +
 drivers/pci/host/Makefile                          |   1 +
 drivers/pci/host/pci-imx6.c                        | 575 +++++++++++++++++++++
 4 files changed, 588 insertions(+), 1 deletion(-)
 create mode 100644 drivers/pci/host/pci-imx6.c

--- /dev/null
+++ b/drivers/pci/host/Kconfig
@@ -0,0 +1,13 @@
+menu "PCI host controller drivers"
+      depends on PCI
+
+config PCIE_DW
+      bool
+
+config PCI_IMX6
+	bool "Freescale i.MX6 PCIe controller"
+	depends on SOC_IMX6Q
+	select PCIEPORTBUS
+	select PCIE_DW
+
+endmenu
--- /dev/null
+++ b/drivers/pci/host/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PCIE_DW) += pcie-designware.o
+obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
--- /dev/null
+++ b/drivers/pci/host/pci-imx6.c
@@ -0,0 +1,575 @@
+/*
+ * PCIe host controller driver for Freescale i.MX6 SoCs
+ *
+ * Copyright (C) 2013 Kosagi
+ *		http://www.kosagi.com
+ *
+ * Author: Sean Cross <xobs@kosagi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+#define to_imx6_pcie(x)	container_of(x, struct imx6_pcie, pp)
+
+struct imx6_pcie {
+	int			reset_gpio;
+	int			power_on_gpio;
+	int			wake_up_gpio;
+	int			disable_gpio;
+	struct clk		*lvds_gate;
+	struct clk		*sata_ref_100m;
+	struct clk		*pcie_ref_125m;
+	struct clk		*pcie_axi;
+	struct pcie_port	pp;
+	struct regmap		*iomuxc_gpr;
+	void __iomem		*mem_base;
+};
+
+/* PCIe Port Logic registers (memory-mapped) */
+#define PL_OFFSET 0x700
+#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
+#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
+
+#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
+#define PCIE_PHY_CTRL_DATA_LOC 0
+#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
+#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
+#define PCIE_PHY_CTRL_WR_LOC 18
+#define PCIE_PHY_CTRL_RD_LOC 19
+
+#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
+#define PCIE_PHY_STAT_ACK_LOC 16
+
+/* PHY registers (not memory-mapped) */
+#define PCIE_PHY_RX_ASIC_OUT 0x100D
+
+#define PHY_RX_OVRD_IN_LO 0x1005
+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
+
+static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
+{
+	u32 val;
+	u32 max_iterations = 10;
+	u32 wait_counter = 0;
+
+	do {
+		val = readl(dbi_base + PCIE_PHY_STAT);
+		val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
+		wait_counter++;
+
+		if (val == exp_val)
+			return 0;
+
+		udelay(1);
+	} while (wait_counter < max_iterations);
+
+	return -ETIMEDOUT;
+}
+
+static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
+{
+	u32 val;
+	int ret;
+
+	val = addr << PCIE_PHY_CTRL_DATA_LOC;
+	writel(val, dbi_base + PCIE_PHY_CTRL);
+
+	val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
+	writel(val, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 1);
+	if (ret)
+		return ret;
+
+	val = addr << PCIE_PHY_CTRL_DATA_LOC;
+	writel(val, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
+static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
+{
+	u32 val, phy_ctl;
+	int ret;
+
+	ret = pcie_phy_wait_ack(dbi_base, addr);
+	if (ret)
+		return ret;
+
+	/* assert Read signal */
+	phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
+	writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 1);
+	if (ret)
+		return ret;
+
+	val = readl(dbi_base + PCIE_PHY_STAT);
+	*data = val & 0xffff;
+
+	/* deassert Read signal */
+	writel(0x00, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
+{
+	u32 var;
+	int ret;
+
+	/* write addr */
+	/* cap addr */
+	ret = pcie_phy_wait_ack(dbi_base, addr);
+	if (ret)
+		return ret;
+
+	var = data << PCIE_PHY_CTRL_DATA_LOC;
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	/* capture data */
+	var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	ret = pcie_phy_poll_ack(dbi_base, 1);
+	if (ret)
+		return ret;
+
+	/* deassert cap data */
+	var = data << PCIE_PHY_CTRL_DATA_LOC;
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	/* wait for ack de-assertion */
+	ret = pcie_phy_poll_ack(dbi_base, 0);
+	if (ret)
+		return ret;
+
+	/* assert wr signal */
+	var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	/* wait for ack */
+	ret = pcie_phy_poll_ack(dbi_base, 1);
+	if (ret)
+		return ret;
+
+	/* deassert wr signal */
+	var = data << PCIE_PHY_CTRL_DATA_LOC;
+	writel(var, dbi_base + PCIE_PHY_CTRL);
+
+	/* wait for ack de-assertion */
+	ret = pcie_phy_poll_ack(dbi_base, 0);
+	if (ret)
+		return ret;
+
+	writel(0x0, dbi_base + PCIE_PHY_CTRL);
+
+	return 0;
+}
+
+/*  Added for PCI abort handling */
+static int imx6q_pcie_abort_handler(unsigned long addr,
+		unsigned int fsr, struct pt_regs *regs)
+{
+	/*
+	 * If it was an imprecise abort, then we need to correct the
+	 * return address to be _after_ the instruction.
+	 */
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+	return 0;
+}
+
+static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
+{
+	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
+
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+			IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+			IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
+
+	gpio_set_value(imx6_pcie->reset_gpio, 0);
+	msleep(100);
+	gpio_set_value(imx6_pcie->reset_gpio, 1);
+
+	return 0;
+}
+
+static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
+{
+	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
+	int ret;
+
+	if (gpio_is_valid(imx6_pcie->power_on_gpio))
+		gpio_set_value(imx6_pcie->power_on_gpio, 1);
+
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+			IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+			IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
+
+	ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
+	if (ret) {
+		dev_err(pp->dev, "unable to enable sata_ref_100m\n");
+		goto err_sata_ref;
+	}
+
+	ret = clk_prepare_enable(imx6_pcie->pcie_ref_125m);
+	if (ret) {
+		dev_err(pp->dev, "unable to enable pcie_ref_125m\n");
+		goto err_pcie_ref;
+	}
+
+	ret = clk_prepare_enable(imx6_pcie->lvds_gate);
+	if (ret) {
+		dev_err(pp->dev, "unable to enable lvds_gate\n");
+		goto err_lvds_gate;
+	}
+
+	ret = clk_prepare_enable(imx6_pcie->pcie_axi);
+	if (ret) {
+		dev_err(pp->dev, "unable to enable pcie_axi\n");
+		goto err_pcie_axi;
+	}
+
+	/* allow the clocks to stabilize */
+	usleep_range(200, 500);
+
+	return 0;
+
+err_pcie_axi:
+	clk_disable_unprepare(imx6_pcie->lvds_gate);
+err_lvds_gate:
+	clk_disable_unprepare(imx6_pcie->pcie_ref_125m);
+err_pcie_ref:
+	clk_disable_unprepare(imx6_pcie->sata_ref_100m);
+err_sata_ref:
+	return ret;
+
+}
+
+static void imx6_pcie_init_phy(struct pcie_port *pp)
+{
+	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
+
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
+
+	/* configure constant input signal to the pcie ctrl and phy */
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
+
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
+}
+
+static void imx6_pcie_host_init(struct pcie_port *pp)
+{
+	int count = 0;
+	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
+
+	imx6_pcie_assert_core_reset(pp);
+
+	imx6_pcie_init_phy(pp);
+
+	imx6_pcie_deassert_core_reset(pp);
+
+	dw_pcie_setup_rc(pp);
+
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+
+	while (!dw_pcie_link_up(pp)) {
+		usleep_range(100, 1000);
+		count++;
+		if (count >= 10) {
+			dev_err(pp->dev, "phy link never came up\n");
+			dev_dbg(pp->dev,
+				"DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
+				readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
+				readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
+			break;
+		}
+	}
+
+	return;
+}
+
+static int imx6_pcie_link_up(struct pcie_port *pp)
+{
+	u32 rc, ltssm, rx_valid, temp;
+
+	/* link is debug bit 36, debug register 1 starts at bit 32 */
+	rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32));
+	if (rc)
+		return -EAGAIN;
+
+	/*
+	 * From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
+	 * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
+	 * If (MAC/LTSSM.state == Recovery.RcvrLock)
+	 * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
+	 * to gen2 is stuck
+	 */
+	pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
+	ltssm = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F;
+
+	if (rx_valid & 0x01)
+		return 0;
+
+	if (ltssm != 0x0d)
+		return 0;
+
+	dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
+
+	pcie_phy_read(pp->dbi_base,
+		PHY_RX_OVRD_IN_LO, &temp);
+	temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN
+		| PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+	pcie_phy_write(pp->dbi_base,
+		PHY_RX_OVRD_IN_LO, temp);
+
+	usleep_range(2000, 3000);
+
+	pcie_phy_read(pp->dbi_base,
+		PHY_RX_OVRD_IN_LO, &temp);
+	temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN
+		| PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+	pcie_phy_write(pp->dbi_base,
+		PHY_RX_OVRD_IN_LO, temp);
+
+	return 0;
+}
+
+static struct pcie_host_ops imx6_pcie_host_ops = {
+	.link_up = imx6_pcie_link_up,
+	.host_init = imx6_pcie_host_init,
+};
+
+static int imx6_add_pcie_port(struct pcie_port *pp,
+			struct platform_device *pdev)
+{
+	int ret;
+
+	pp->irq = platform_get_irq(pdev, 0);
+	if (!pp->irq) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		return -ENODEV;
+	}
+
+	pp->root_bus_nr = -1;
+	pp->ops = &imx6_pcie_host_ops;
+
+	spin_lock_init(&pp->conf_lock);
+	ret = dw_pcie_host_init(pp);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize host\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __init imx6_pcie_probe(struct platform_device *pdev)
+{
+	struct imx6_pcie *imx6_pcie;
+	struct pcie_port *pp;
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *dbi_base;
+	int ret;
+
+	imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
+	if (!imx6_pcie)
+		return -ENOMEM;
+
+	pp = &imx6_pcie->pp;
+	pp->dev = &pdev->dev;
+
+	/* Added for PCI abort handling */
+	hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
+		"imprecise external abort");
+
+	dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!dbi_base) {
+		dev_err(&pdev->dev, "dbi_base memory resource not found\n");
+		return -ENODEV;
+	}
+
+	pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
+	if (IS_ERR(pp->dbi_base)) {
+		dev_err(&pdev->dev, "unable to remap dbi_base\n");
+		ret = PTR_ERR(pp->dbi_base);
+		goto err;
+	}
+
+	/* Fetch GPIOs */
+	imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
+	if (!gpio_is_valid(imx6_pcie->reset_gpio)) {
+		dev_err(&pdev->dev, "no reset-gpio defined\n");
+		ret = -ENODEV;
+	}
+	ret = devm_gpio_request_one(&pdev->dev,
+				imx6_pcie->reset_gpio,
+				GPIOF_OUT_INIT_LOW,
+				"PCIe reset");
+	if (ret) {
+		dev_err(&pdev->dev, "unable to get reset gpio\n");
+		goto err;
+	}
+
+	imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
+	if (gpio_is_valid(imx6_pcie->power_on_gpio)) {
+		ret = devm_gpio_request_one(&pdev->dev,
+					imx6_pcie->power_on_gpio,
+					GPIOF_OUT_INIT_LOW,
+					"PCIe power enable");
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get power-on gpio\n");
+			goto err;
+		}
+	}
+
+	imx6_pcie->wake_up_gpio = of_get_named_gpio(np, "wake-up-gpio", 0);
+	if (gpio_is_valid(imx6_pcie->wake_up_gpio)) {
+		ret = devm_gpio_request_one(&pdev->dev,
+					imx6_pcie->wake_up_gpio,
+					GPIOF_IN,
+					"PCIe wake up");
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get wake-up gpio\n");
+			goto err;
+		}
+	}
+
+	imx6_pcie->disable_gpio = of_get_named_gpio(np, "disable-gpio", 0);
+	if (gpio_is_valid(imx6_pcie->disable_gpio)) {
+		ret = devm_gpio_request_one(&pdev->dev,
+					imx6_pcie->disable_gpio,
+					GPIOF_OUT_INIT_HIGH,
+					"PCIe disable endpoint");
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get disable-ep gpio\n");
+			goto err;
+		}
+	}
+
+	/* Fetch clocks */
+	imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate");
+	if (IS_ERR(imx6_pcie->lvds_gate)) {
+		dev_err(&pdev->dev,
+			"lvds_gate clock select missing or invalid\n");
+		ret = PTR_ERR(imx6_pcie->lvds_gate);
+		goto err;
+	}
+
+	imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m");
+	if (IS_ERR(imx6_pcie->sata_ref_100m)) {
+		dev_err(&pdev->dev,
+			"sata_ref_100m clock source missing or invalid\n");
+		ret = PTR_ERR(imx6_pcie->sata_ref_100m);
+		goto err;
+	}
+
+	imx6_pcie->pcie_ref_125m = devm_clk_get(&pdev->dev, "pcie_ref_125m");
+	if (IS_ERR(imx6_pcie->pcie_ref_125m)) {
+		dev_err(&pdev->dev,
+			"pcie_ref_125m clock source missing or invalid\n");
+		ret = PTR_ERR(imx6_pcie->pcie_ref_125m);
+		goto err;
+	}
+
+	imx6_pcie->pcie_axi = devm_clk_get(&pdev->dev, "pcie_axi");
+	if (IS_ERR(imx6_pcie->pcie_axi)) {
+		dev_err(&pdev->dev,
+			"pcie_axi clock source missing or invalid\n");
+		ret = PTR_ERR(imx6_pcie->pcie_axi);
+		goto err;
+	}
+
+	/* Grab GPR config register range */
+	imx6_pcie->iomuxc_gpr =
+		 syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
+		dev_err(&pdev->dev, "unable to find iomuxc registers\n");
+		ret = PTR_ERR(imx6_pcie->iomuxc_gpr);
+		goto err;
+	}
+
+	ret = imx6_add_pcie_port(pp, pdev);
+	if (ret < 0)
+		goto err;
+
+	platform_set_drvdata(pdev, imx6_pcie);
+	return 0;
+
+err:
+	return ret;
+}
+
+static const struct of_device_id imx6_pcie_of_match[] = {
+	{ .compatible = "fsl,imx6q-pcie", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
+
+static struct platform_driver imx6_pcie_driver = {
+	.driver = {
+		.name	= "imx6q-pcie",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(imx6_pcie_of_match),
+	},
+};
+
+/* Freescale PCIe driver does not allow module unload */
+
+static int __init imx6_pcie_init(void)
+{
+	return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
+}
+module_init(imx6_pcie_init);
+
+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
+MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
+MODULE_LICENSE("GPL v2");