KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ath79/dts
History
Petr Štetiar db4b6535f8 ath79: Add support for Ubiquity Bullet M (XW) 
CPU: AR9342 SoC
RAM:     64 MB DDR2
Flash:    8 MB NOR SPI
Ports:  100 MBit (24V PoE in)
WLAN: 2.4/5 GHz
UART:     1 UART on PCB marked as J1 with 115200 8N1 config
LEDs:       Power, Ethernet, 4x RSSI LEDs (orange, red, 2x green)
Buttons:    Reset

UART connection details

  .---------------------------------.
  |                                 |
[ETH]          J1                 [ANT]
  |    o VCC o RX o TX o GND        |
  `---------------------------------'

Flashing instructions

 A) Serial console, U-Boot and TFTP

   1. Connect to serial header J1 on the PCB
   2. Power on device and enter U-Boot console
   3. Set up TFTP server serving an OpenWrt initramfs build
   4. Load initramfs build using the command tftpboot in the U-Boot cli
   5. Boot the loaded image using the command bootm
   6. Copy squashfs OpenWrt sysupgrade build to the booted device
   7. Use mtd to write sysupgrade to partition "firmware"
   8. Reboot and enjoy

 B) Experimental factory image flashing over SSH from airOS v6.1.7

   1. You need to flash your UBNT M2HP with airOS v6.1.7 firmware
      no other airOS version is currently supported
   2. git clone https://github.com/true-systems/ubnt-bullet-m2hp-openwrt-flashing
   3. cd ubnt-bullet-m2hp-openwrt-flashing
   4. make flash-factory FW_OWRT=/path/to/your/openwrt-ath79-generic-ubnt_bullet-m-xw-squashfs-factory.bin

Tested only on Bullet M2HP.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-26 12:05:38 +01:00
..
ar724x.dtsi ath79: add pinmux node to ar724x.dtsi 2018-06-01 08:23:02 +02:00
ar934x.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar7100.dtsi ath79: add syscon compatible property to ar7100 ethernet nodes 2018-09-06 21:35:53 +02:00
ar7161_buffalo_wzr-hp-ag300h.dts ath79: add support for Buffalo WZR-HP-AG300H 2018-09-10 09:35:07 +02:00
ar7161_dlink_dir-825-b1.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar7161_netgear_wndr3700.dts ath79: specify "firmware" partition format for WNDR3700 and v2 2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3700.dtsi ath79: use both WNDR3x00 power leds for boot status indication 2018-08-15 07:42:36 +02:00
ar7161_netgear_wndr3700v2.dts ath79: specify "firmware" partition format for WNDR3700 and v2 2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3800.dts ath79: specify "firmware" partition format for Netgear WNDR3800 2018-11-24 08:46:59 +01:00
ar7161_ubnt_routerstation-pro.dts ath79: add syscon compatible property to ar7100 ethernet nodes 2018-09-06 21:35:53 +02:00
ar7161_ubnt_routerstation.dts ath79: initial support for Ubiquiti RouterStation and RouterStation Pro 2018-08-27 19:31:17 +02:00
ar7161_ubnt_routerstation.dtsi ath79: initial support for Ubiquiti RouterStation and RouterStation Pro 2018-08-27 19:31:17 +02:00
ar7240.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar7240_buffalo_whr-g301n.dts ath79: add support for Buffalo WHR-G301N 2018-08-16 21:20:57 +02:00
ar7240_netgear_wnr612-v2.dts ath79: add Netgear WNR612 v2 2018-06-26 07:05:30 +02:00
ar7240_netgear_wnr612-v2.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7240_on_n150r.dts ath79: add support for ON Networks N150R 2018-06-26 07:05:44 +02:00
ar7240_tplink_tl-wr74xn-v1.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7240_tplink_tl-wr740n-v1.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr740n-v3.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr741-v1.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr743nd-v1.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr841-v5.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7240_tplink_tl-wr941-v4.dts ath79: Fix led nodes for TL-WR740N v2 and add its clones 2018-08-08 08:11:11 +02:00
ar7241.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar7241_tplink.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7241_tplink_tl-mr3x20.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar7241_tplink_tl-mr3220-v1.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar7241_tplink_tl-mr3420-v1.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar7241_tplink_tl-wr841-v7.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar7241_ubnt_bullet-m.dts ath79: ar7241: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
ar7241_ubnt_nano-m.dts ath79: fix dts files 2018-05-17 07:40:19 +02:00
ar7241_ubnt_rocket-m.dts ath79: ar7241: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
ar7241_ubnt_unifi.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7241_ubnt_xm.dtsi ath79: ubnt-xm: hijack LED4 as booting/failsafe 2018-08-23 22:42:15 +02:00
ar7242.dtsi ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
ar7242_avm_fritz300e.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar7242_buffalo_bhr-4grv.dts ath79: fix MAC address for Buffalo BHR-4GRV 2018-10-07 10:46:20 +02:00
ar7242_buffalo_wzr-bhr.dtsi ath79: fix MAC address for Buffalo BHR-4GRV 2018-10-07 10:46:20 +02:00
ar7242_buffalo_wzr-hp-g302h-a1a0.dts ath79: add support for Buffalo WZR-HP-G302H A1A0 2018-10-07 15:44:19 +02:00
ar7242_buffalo_wzr-hp-g450h.dts ath79: fix MAC address for Buffalo BHR-4GRV 2018-10-07 10:46:20 +02:00
ar7242_tplink_tl-wr2543-v1.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9132.dtsi ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x 2018-08-28 11:26:53 +02:00
ar9132_tplink_tl-wa901nd-v2.dts ath79: add support for TP-Link TL-WA901ND v2 2018-10-07 15:49:25 +02:00
ar9132_tplink_tl-wr941-v2.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9132_tplink_tl-wr1043nd-v1.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9330.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9330_glinet_ar150.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9330_pqi_air-pen.dts ath79: fix PQI Air Pen support 2018-10-28 11:03:49 +01:00
ar9331.dtsi ath79: add tl-mr3020-v1 support 2018-06-08 12:19:49 +02:00
ar9331_dptechnics_dpt-module.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9331_dragino_ms14.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9331_embeddedwireless_dorin.dts ath79: fix mac address increment for embedded wireless Dorin 2018-08-25 19:18:08 +02:00
ar9331_etactica_eg200.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9331_onion_omega.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9331_pisen_wmm003n.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9331_tplink_tl-mr10u.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-mr3020-v1.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9331_tplink_tl-mr3040-v2.dts ath79: add support for TP-Link MR-3040 v2 2018-08-16 21:20:57 +02:00
ar9331_tplink_tl-wr703n.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9331_tplink_tl-wr740nd-v4.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr741nd-v4.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr741nd-v4.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9341.dtsi ath79: ar934x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9341_pcs_cr3000.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9341_tplink_tl-wr842n-v2.dts ath79: Add support for TP-Link TL-WR842N-v2 2018-10-07 15:44:19 +02:00
ar9342_iodata_etg3-r.dts ath79: add support for I-O DATA ETG3-R 2018-08-23 22:42:15 +02:00
ar9342_ubnt_bullet-m-xw.dts ath79: Add support for Ubiquity Bullet M (XW) 2018-11-26 12:05:38 +01:00
ar9342_ubnt_lap-120.dts ath79: Add support for Ubiquiti LiteAP ac (LAP-120) 2018-10-28 10:59:09 +01:00
ar9342_ubnt_nanostation-ac-loco.dts ath79: Add support for Ubiquiti NanoStation AC loco 2018-10-07 10:46:20 +02:00
ar9342_ubnt_nanostation-ac.dts ath79: Add support for Ubiquiti Nanostation AC 2018-10-07 10:46:20 +02:00
ar9342_ubnt_wa.dtsi ath79: Add generic device tree for Ubiquiti WA boards 2018-10-07 10:46:20 +02:00
ar9342_ubnt_xw.dtsi ath79: Add support for Ubiquity Bullet M (XW) 2018-11-26 12:05:38 +01:00
ar9344.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
ar9344_ocedo_raccoon.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9344_pcs_cap324.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9344_pcs_cr5000.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ar9344_tplink_tl-wdr3600.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9344_tplink_tl-wdr4300.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9344_tplink_tl-wdr4300.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
ar9344_wd_mynet-wifi-rangeextender.dts ath79: add support for WD My Net Wi-Fi Range Extender 2018-09-10 09:07:41 +02:00
ath79.dtsi ath79: ar934x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
qca956x.dtsi ath79: add QCA956x GMAC config 2018-08-13 08:43:15 +02:00
qca9533.dtsi ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
qca9533_glinet_ar300m.dtsi ath79: Fix GL-AR300M USB trigger 2018-09-22 21:20:48 +02:00
qca9533_glinet_ar300m_nand.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
qca9533_glinet_ar300m_nor.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
qca9533_tplink_tl-wr841-v9.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9533_tplink_tl-wr841-v11.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9533_tplink_tl-wr841.dtsi ath79: add support for TP-Link WR841N/ND v11 2018-08-14 10:19:37 +02:00
qca9557.dtsi ath79: fix PLL settings for QCA955x 2018-08-09 17:24:39 +01:00
qca9557_iodata_wn-ac-dgr.dtsi ath79: fix wrong pll-data value for I-O DATA WN-AC-DGR devices 2018-09-26 20:35:07 +02:00
qca9557_iodata_wn-ac1167dgr.dts ath79: add support for I-O DATA WN-AC1167DGR 2018-08-16 21:20:57 +02:00
qca9557_iodata_wn-ac1600dgr2.dts ath79: add support for I-O DATA WN-AC1167DGR 2018-08-16 21:20:57 +02:00
qca9558_buffalo_bhr-4grv2.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9558_ocedo_koala.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9558_openmesh_om5p-ac-v2.dts ath79: fix PLL settings for QCA955x 2018-08-09 17:24:39 +01:00
qca9558_tplink_archer-c7-v1.dts ath79: add support for TP-Link Archer C7 v1 2018-08-19 18:48:43 +02:00
qca9558_tplink_archer-c7-v2.dts ath79: specify "firmware" partition format for TP-LINK Archer C7 v2 2018-11-24 12:46:00 +01:00
qca9558_tplink_archer-c7.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9558_tplink_tl-wdr4900-v2.dts treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
qca9558_tplink_tl-wr1043nd-v2.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
qca9558_tplink_tl-wr1043nd-v3.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
qca9558_tplink_tl-wr1043nd.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9561_avm_fritz4020.dts ath79: flag FritzBox 4020 buttons as active low 2018-09-22 19:26:26 +02:00
qca9563_elecom_wrc-300ghbk2-i.dts ath79: add support for ELECOM WRC-300GHBK2-I 2018-09-10 09:30:28 +02:00
qca9563_phicomm_k2t.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9563_tplink_re450-v2.dts ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9563_tplink_tl-wr1043n.dtsi ath79: add support for indicating the boot state using multiple leds 2018-08-15 07:42:36 +02:00
qca9563_tplink_tl-wr1043nd-v4.dts ath79: fix dts warnings 2018-08-08 08:11:11 +02:00
qca9563_ubnt_unifiac-lite.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lite.dtsi ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi ath79: specify "firmware" partition format for Ubiquiti UniFi 2018-11-24 19:04:29 +01:00