openwrtv4/target/linux
Romain MARIADASSOU ce31bdc20c ramips: add support for TL-WA801ND v5
Specification:

- System-On-Chip: MediaTek MT7628NN
- CPU/Speed: 580 MHz
- Flash-Chip: ELM Technology GD25Q64
- Flash size: 8192 KiB
- RAM: 64 MiB
- Wireless No1: SoC-integrated: MT7628N 2.4GHz 802.11bgn

Currently the only method to install openwrt for the first time is via
TFTP recovery. After first install you can use regular updates.

Flash instructions:

1) To flash the recovery image, start a TFTP server with IP address
   192.168.0.66 and serve the recovery image named tp_recovery.bin.
2) Connect your device to the LAN port, then press the WPS and Reset
   button and power it up. Keep pressing the WPS/Reset button for
   10 seconds or until the lock LED is lighting up.
   It will try to download the recovery image and flash it.

It can take up to 2-3 minutes to finish. When it reaches 100%, the
router will reboot itself.

Signed-off-by: Romain MARIADASSOU <roms2000@free.fr>
2018-07-04 01:20:02 +02:00
..
adm5120 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
adm8668 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
apm821xx kernel: bump 4.14 to 4.14.48 2018-06-05 22:54:00 +03:00
ar7 kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
ar71xx kernel: bump 4.9 to 4.9.110 2018-07-02 07:04:34 +02:00
arc770 kernel: bump 4.14 to 4.14.51 2018-06-26 08:57:21 +02:00
archs38 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
armvirt arm64: enable harden branch predictor 2018-04-27 21:34:18 +02:00
at91 kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
ath25 ath25: drop 4.9 kernel support 2018-05-22 07:20:13 +02:00
ath79 ath79: add support for TP-Link RE450 v2 2018-07-02 07:05:33 +02:00
au1000 kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
bcm53xx bcm53xx: exit if writing kernel during sysupgrade fails 2018-06-18 13:47:08 +02:00
brcm47xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
brcm63xx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
brcm2708 brcm2708: Add wifi driver, firmware and NVRAM for Raspberry Pi 3 b 2018-06-20 21:50:14 +02:00
cns3xxx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
gemini gemini: Cook SQ201 images 2018-06-18 06:35:33 +02:00
generic kernel: fix AT8032 PHY phy id mask 2018-07-04 01:19:05 +02:00
imx6 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
ipq40xx kernel: bump 4.14 to 4.14.52 2018-07-02 07:04:48 +02:00
ipq806x ipq806x: drop gpio export patch 2018-06-28 18:39:57 +02:00
ixp4xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
kirkwood kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
lantiq lantiq: enlarge AVM Fritz!Box 3370 flash 2018-07-04 01:20:02 +02:00
layerscape kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
malta malta: bump tp v4.14 2018-01-09 10:26:16 +01:00
mcs814x kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
mediatek kernel: bump 4.14 to 4.14.52 2018-07-02 07:04:48 +02:00
mpc85xx kernel: bump to 4.9.105 2018-06-01 08:25:14 +02:00
mvebu kernel: bump 4.14 to 4.14.51 2018-06-26 08:57:21 +02:00
mxs kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
octeon octeon: Add and set CPU type Octeon+ as default 2018-06-20 15:36:02 +02:00
octeontx kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
omap kernel: enable EXPORTFS by default 2018-05-22 07:55:05 +02:00
omap24xx omap24xx: remove referece to not existing kmod-usb-musb-tusb6010 2018-01-15 13:13:34 +01:00
orion orion: remove linux 4.4 support 2018-04-19 14:38:57 +02:00
oxnas kernel: bump 4.14 to 4.14.52 2018-07-02 07:04:48 +02:00
pistachio kernel: bump 4.14 to 4.14.42 2018-05-22 20:49:08 +02:00
ppc40x treewide: drop target board_name functions 2017-07-15 23:13:34 +02:00
ppc44x ppc44x: mark as broken 2017-01-10 12:49:34 +01:00
ramips ramips: add support for TL-WA801ND v5 2018-07-04 01:20:02 +02:00
rb532 treewide: move nand_do_upgrade call to platform_do_upgrade 2018-02-16 14:44:02 +01:00
sunxi kernel: bump 4.9 to 4.9.108 2018-06-18 07:10:19 +02:00
uml kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
x86 kernel: bump 4.9 to 4.9.106 2018-06-07 09:04:46 +02:00
xburst kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24 08:55:52 +02:00
zynq zynq: remove config options handled by generic 2018-07-02 07:12:48 +02:00
Makefile