ramips: add support for TL-WA801ND v5

Specification:

- System-On-Chip: MediaTek MT7628NN
- CPU/Speed: 580 MHz
- Flash-Chip: ELM Technology GD25Q64
- Flash size: 8192 KiB
- RAM: 64 MiB
- Wireless No1: SoC-integrated: MT7628N 2.4GHz 802.11bgn

Currently the only method to install openwrt for the first time is via
TFTP recovery. After first install you can use regular updates.

Flash instructions:

1) To flash the recovery image, start a TFTP server with IP address
   192.168.0.66 and serve the recovery image named tp_recovery.bin.
2) Connect your device to the LAN port, then press the WPS and Reset
   button and power it up. Keep pressing the WPS/Reset button for
   10 seconds or until the lock LED is lighting up.
   It will try to download the recovery image and flash it.

It can take up to 2-3 minutes to finish. When it reaches 100%, the
router will reboot itself.

Signed-off-by: Romain MARIADASSOU <roms2000@free.fr>
This commit is contained in:
Romain MARIADASSOU 2018-06-27 01:24:39 +02:00 committed by Mathias Kresin
parent 7d07bc96b7
commit ce31bdc20c
6 changed files with 77 additions and 0 deletions

View file

@ -429,6 +429,10 @@ tplink,c50-v3)
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
;;
tplink,tl-wa801nd-v5)
ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
;;
tplink,tl-mr3420-v5|\
tplink,tl-wr842n-v5)
set_usb_led "$boardname:green:usb"

View file

@ -58,6 +58,7 @@ ramips_setup_interfaces()
omega2 | \
omega2p | \
timecloud|\
tplink,tl-wa801nd-v5|\
w150m|\
widora,neo-16m|\
widora,neo-32m|\

View file

@ -42,6 +42,7 @@ get_status_led() {
r6220|\
tplink,c20-v4|\
tplink,c50-v3|\
tplink,tl-wa801nd-v5|\
tplink,tl-mr3420-v5|\
tplink,tl-wr842n-v5|\
tplink,tl-wr902ac-v3|\

View file

@ -259,6 +259,7 @@ platform_check_image() {
tplink,c20-v4|\
tplink,c50-v3|\
tplink,tl-mr3420-v5|\
tplink,tl-wa801nd-v5|\
tplink,tl-wr842n-v5|\
tplink,tl-wr902ac-v3|\
tl-wr840n-v4|\

View file

@ -0,0 +1,57 @@
/dts-v1/;
#include "TPLINK-8M.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tl-wa801nd-v5", "mediatek,mt7628an-soc";
model = "TP-Link TL-WA801ND v5";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "tl-wa801nd-v5:green:power";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
lan {
label = "tl-wa801nd-v5:green:lan";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
wlan {
label = "tl-wa801nd-v5:green:wlan";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
wps {
label = "tl-wa801nd-v5:orange:wps";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "p0led_an", "perst", "refclk", "wdt", "wled_an";
ralink,function = "gpio";
};
};
};

View file

@ -114,6 +114,19 @@ define Device/pbr-d1
endef
TARGET_DEVICES += pbr-d1
define Device/tplink_tl-wa801nd-v5
$(Device/tplink)
DTS := TL-WA801NDV5
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link TL-WA801ND v5
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0x08010005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
endef
TARGET_DEVICES += tplink_tl-wa801nd-v5
define Device/tl-wr840n-v4
$(Device/tplink)
DTS := TL-WR840NV4