Henryk Heisig c0742307a1 ar71xx: add support for TP-Link Archer C60 v2 ... TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (web): Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Flash instruction (recovery): 1. Set PC to fixed IP address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Henryk Heisig <hyniu@o2.pl>		2018-04-07 00:09:05 +02:00
..
allnet.sh	ar71xx: Fix sysupgrades for Allnet and OpenMesh devices	2013-10-20 15:59:05 +00:00
dir825.sh	ar71xx: use mtd_get_part_size helper	2013-07-20 09:26:57 +00:00
merakinand.sh	treewide: use only board_name function to get name	2017-07-15 23:13:34 +02:00
openmesh.sh	ar71xx: enable sysupgrade for the OpenMesh A40	2017-02-14 12:18:05 +01:00
platform.sh	ar71xx: add support for TP-Link Archer C60 v2	2018-04-07 00:09:05 +02:00