ar71xx: add support for TP-Link Archer C60 v2

TP-Link Archer C60 v2 is a dual-band AC1350 router, based on
Qualcomm/Atheros QCA9561 + QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Flash instruction (web):

Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use
OEM System Tools - Firmware Upgrade site.

Flash instruction (recovery):

1. Set PC to fixed IP address 192.168.0.66
2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and
   rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root
   directory
4. Turn off the router
5. Press and hold reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time the firmware should
   be transferred from the tftp server
8. Wait ~30 second to complete recovery

Flash instruction (under U-Boot, using UART):

tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f030000 +$filesize
cp.b $fileaddr 0x9f030000 $filesize
reset

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
This commit is contained in:
Henryk Heisig 2018-01-15 06:44:14 +01:00 committed by Piotr Dymacz
parent b834487203
commit c0742307a1
15 changed files with 157 additions and 4 deletions

View file

@ -128,7 +128,8 @@ archer-c7)
;;
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1)
archer-c60-v1|\
archer-c60-v2)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"

View file

@ -248,7 +248,8 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
archer-c60-v1)
archer-c60-v1|\
archer-c60-v2)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"

View file

@ -64,6 +64,7 @@ get_status_led() {
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
archer-c60-v2|\
archer-c7-v4|\
fritz300e|\
gl-usb150|\

View file

@ -163,6 +163,7 @@ case "$FIRMWARE" in
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
archer-c60-v2|\
cf-e355ac-v2|\
cf-e375ac)
ath10kcal_extract "art" 20480 12064

View file

@ -14,7 +14,8 @@ board=$(board_name)
case "$board" in
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1)
archer-c60-v1|\
archer-c60-v2)
echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
;;
*)

View file

@ -485,6 +485,9 @@ ar71xx_board_detect() {
*"Archer C60 v1")
name="archer-c60-v1"
;;
*"Archer C60 v2")
name="archer-c60-v2"
;;
*"Archer C7")
name="archer-c7"
;;

View file

@ -202,6 +202,7 @@ platform_check_image() {
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
archer-c60-v2|\
archer-c7-v4|\
bullet-m|\
c-55|\

View file

@ -53,6 +53,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V2 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set

View file

@ -1529,6 +1529,16 @@ config ATH79_MACH_ARCHER_C60_V1
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_ARCHER_C60_V2
bool "TP-LINK Archer C60 v2 support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X

View file

@ -63,6 +63,7 @@ obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V2) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o

View file

@ -1,7 +1,7 @@
/*
* TP-Link Archer C60 v1 board support
*
* Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
* Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@ -83,6 +83,44 @@ static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
},
};
static struct gpio_led archer_c60_v2_leds_gpio[] __initdata = {
{
.name = "archer-c60-v2:green:power",
.gpio = ARCHER_C60_V1_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:wlan2g",
.gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:wlan5g",
.gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:lan",
.gpio = ARCHER_C60_V1_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:wan",
.gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
.active_low = 1,
},
{
.name = "archer-c60-v2:amber:wan",
.gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:wps",
.gpio = ARCHER_C60_V1_GPIO_LED_WPS,
.active_low = 1,
},
};
static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
{
.desc = "Reset button",
@ -143,3 +181,45 @@ static void __init archer_c60_v1_setup(void)
MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
"TP-LINK Archer C60 v1", archer_c60_v1_setup);
static void __init archer_c60_v2_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fb08);
u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v2_leds_gpio),
archer_c60_v2_leds_gpio);
ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c60_v1_gpio_keys),
archer_c60_v1_gpio_keys);
ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
/* WAN port */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(4);
ath79_register_eth(0);
/* LAN ports */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_switch_data.phy_poll_mask |= BIT(4);
ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);
ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V2, "ARCHER-C60-V2",
"TP-LINK Archer C60 v2", archer_c60_v2_setup);

View file

@ -48,6 +48,7 @@ enum ath79_mach_type {
ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C60_V2, /* TP-LINK Archer C60 V2 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */

View file

@ -31,6 +31,7 @@ CONFIG_ATH79_MACH_ARCHER_C25_V1=y
CONFIG_ATH79_MACH_ARCHER_C58_V1=y
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C60_V2=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y

View file

@ -62,6 +62,18 @@ define Device/archer-c60-v1
endef
TARGET_DEVICES += archer-c60-v1
define Device/archer-c60-v2
$(Device/archer-c60-v1)
DEVICE_TITLE := TP-LINK Archer C60 v2
BOARDNAME := ARCHER-C60-V2
TPLINK_BOARD_ID := ARCHER-C60-V2
DEVICE_PROFILE := ARCHERC60V2
IMAGE_SIZE := 7808k
MTDPARTS := spi0.0:192k(u-boot)ro,7808k(firmware),128k(tplink)ro,64k(art)ro
SUPPORTED_DEVICES := archer-c60-v2
endef
TARGET_DEVICES += archer-c60-v2
define Device/archer-c5-v1
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK Archer C5 v1

View file

@ -451,6 +451,43 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system",
},
/** Firmware layout for the C60v2 */
{
.id = "ARCHER-C60-V2",
.vendor = "",
.support_list =
"SupportList:\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
.support_trail = '\x00',
.soft_ver = "soft_ver:2.0.0\n",
.partitions = {
{"factory-boot", 0x00000, 0x1fb00},
{"default-mac", 0x1fb00, 0x00200},
{"pin", 0x1fd00, 0x00100},
{"product-info", 0x1fe00, 0x00100},
{"device-id", 0x1ff00, 0x00100},
{"fs-uboot", 0x20000, 0x10000},
{"os-image", 0x30000, 0x180000},
{"file-system", 0x1b0000, 0x620000},
{"soft-version", 0x7d9500, 0x00100},
{"support-list", 0x7d9600, 0x00100},
{"extra-para", 0x7d9700, 0x00100},
{"profile", 0x7d9800, 0x03000},
{"default-config", 0x7dc800, 0x03000},
{"partition-table", 0x7df800, 0x00800},
{"user-config", 0x7e0000, 0x0c000},
{"certificate", 0x7ec000, 0x04000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system",
},
/** Firmware layout for the C5 */
{
.id = "ARCHER-C5-V2",
@ -1343,6 +1380,7 @@ static void build_image(const char *output,
/* Some devices need the extra-para partition to accept the firmware */
if (strcasecmp(info->id, "ARCHER-C25-V1") == 0 ||
strcasecmp(info->id, "ARCHER-C60-V2") == 0 ||
strcasecmp(info->id, "TLWR1043NV5") == 0) {
const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
parts[5] = put_data("extra-para", mdat, 11);