KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ar71xx/files/arch/mips/ath79
History
Felix Fietkau 6413f40e96 ar71xx: fix ethernet on wnr2000-v4 
Most people report broken ethernet with upstream. Last year, user "franz.flasch"
authored a working mach-file. His patch is outdated so I modernized it. Original
patch and user commentary on page 1:
https://forum.openwrt.org/viewtopic.php?pid=260861#p260861

I have figured out what the critical differences are between the two that caused
upstream ethernet to break.
  1) Both ath79_init_mac() functions calls must be invocated before any GMAC init
  2) must init GMAC0 before GMAC1

That was enough to get upstream to function, but I wanted to enjoy my confidence
having tested franz's patch for a week sucessfully, so I put his whole
function in, which only features more differences in order of function calls.

An expert should consider these changes, which could pose potential bugs/issues:
1) No longer using the flag AR934X_ETH_CFG_SW_PHY_SWAP in the
ath79_setup_ar934x_eth_cfg() call.

2) Possible consequence of no longer explicitly setting ethernet duplex/speed.

Review: With this patch, my ethernet and wireless works.

Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>

SVN-Revision: 45633
2015-05-08 12:23:45 +00:00
..
dev-ap9x-pci.c ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-ap9x-pci.h ar71xx: add ap91_pci_init_simple helper 2012-12-12 16:49:48 +00:00
dev-dsa.c ar71xx: add v3.18 support 2015-02-15 19:45:29 +00:00
dev-dsa.h ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
dev-eth.c ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x 2015-04-20 15:00:52 +00:00
dev-eth.h ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x 2015-04-20 15:00:52 +00:00
dev-m25p80.c ar71xx: enable fast flash read on dual-flash devices 2013-01-29 19:12:25 +00:00
dev-m25p80.h ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
dev-nfc.c ar71xx: ar934x_nfc: fix memory initialization bug 2014-03-12 12:52:36 +00:00
dev-nfc.h ar71xx: add ath79_nfc_set_ecc_mode helper 2013-09-19 18:43:42 +00:00
mach-alfa-ap96.c ar71xx: add linux 3.14 support 2014-08-07 12:40:53 +00:00
mach-alfa-nx.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-all0258n.c ar71xx: remove the built-in MTD map of the ALL0258N 2012-07-03 15:24:01 +00:00
mach-all0315n.c ar71xx: all0315n: fix ethernet according to vendor info 2012-08-29 10:37:54 +00:00
mach-ap83.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-ap96.c ar71xx: remove the built-in MTD map of the AP96 board 2012-03-27 19:38:07 +00:00
mach-ap113.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-ap132.c ar71xx: add kernel support for Atheros AP132 Reference Board 2013-01-29 19:12:30 +00:00
mach-archer-c7.c add support for the archer c5 2014-07-23 12:47:25 +00:00
mach-aw-nr580.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-bhu-bxu2000n2-a.c ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board 2013-10-30 06:50:57 +00:00
mach-cap4200ag.c ar71xx: add support for the Senao CAP4200AG board 2012-10-27 08:55:38 +00:00
mach-carambola2.c ar71xx: update Carambola2 platform data 2014-08-04 14:46:52 +00:00
mach-cpe510.c ar71xx: add support for TP-LINK CPE210/220/510/520 2014-11-26 08:59:32 +00:00
mach-dgl-5500-a1.c add D-link DGL-5500 A1 support 2014-11-27 14:27:34 +00:00
mach-dhp-1565-a1.c ar71xx: Added support for D-link DHP-1565 rev. A1 2014-11-19 09:20:47 +00:00
mach-dir-505-a1.c ar71xx: dir-505: fix reset button gpio active_low value 2015-02-09 12:17:00 +00:00
mach-dir-600-a1.c ar71xx: add support for dlink dir-615-e1 2014-06-02 14:43:35 +00:00
mach-dir-615-c1.c ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address 2015-01-28 19:19:47 +00:00
mach-dir-825-b1.c ar71xx: dir-825-b1: use ath79_parse_ascii_mac helper 2013-09-20 16:41:32 +00:00
mach-dir-825-c1.c ar71xx: fix WLAN 5 GHz LED init on dir-825-c1 2013-10-20 15:59:04 +00:00
mach-dragino2.c ar71xx: Fix LED definitions for the DRAGINO2 board 2014-10-14 10:33:07 +00:00
mach-eap300v2.c ar71xx: add kernel support for the EnGenius EAP300 v2 board 2014-07-14 21:30:26 +00:00
mach-eap7660d.c ar71xx: add ALL0305 board alias 2012-08-22 12:33:22 +00:00
mach-el-m150.c ar71xx: Fix the sys LEDs on the EasyLink M150 and mini 2014-11-14 16:58:29 +00:00
mach-el-mini.c ar71xx: Fix the sys LEDs on the EasyLink M150 and mini 2014-11-14 16:58:29 +00:00
mach-esr900.c ar71xx: use ETH_ALEN for consistency 2014-08-25 06:35:58 +00:00
mach-esr1750.c ar71xx: add kernel support for EnGenius ESR1750 2014-07-13 19:43:57 +00:00
mach-ew-dorin.c ar71xx: ew-dorin: added router firmware generation 2012-08-01 12:24:57 +00:00
mach-f9k1115v2.c Belkin AC 1750 DB (F9K1115v2) support 2014-12-17 08:27:38 +00:00
mach-gl-inet.c ar71xx: Fix GL.iNet WLAN LED 2014-07-21 19:26:46 +00:00
mach-gs-oolite.c ar71xx: oolite: the buttons are not active_low 2014-08-01 11:19:34 +00:00
mach-hiwifi-hc6361.c ar71xx: add kernel support for HiWiFi HC6361. 2014-06-02 14:56:24 +00:00
mach-hornet-ub.c Fix (invert/revert) Hornet-UB WPS LED state 2015-03-15 19:25:48 +00:00
mach-ja76pf.c ar71xx: add support for the jjPlus JA76PF2 board 2012-03-16 18:00:34 +00:00
mach-jwap003.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-mc-mac1200r.c ar71xx: Add support for MERCURY MAC1200R 2015-02-09 12:16:51 +00:00
mach-mr600.c ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board 2014-08-18 13:09:14 +00:00
mach-mr900.c ar71xx: add kernel support for the OpenMesh MR900v2 2014-11-14 16:54:58 +00:00
mach-mynet-n600.c ar71xx: my net n600: simplify LNA GPIO setup 2014-01-10 09:37:58 +00:00
mach-mynet-n750.c ar71xx: mynet-n750: define LEDs connected to the AR8327 switch 2014-01-21 17:17:42 +00:00
mach-mynet-rext.c ar71xx: improve WD's My Net Wi-fi Range Extender image creation 2015-03-11 15:56:34 +00:00
mach-mzk-w04nu.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-mzk-w300nh.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-nbg460n.c ar71xx: remove __dev{init,exit} annotations from kernel files 2013-02-19 20:52:06 +00:00
mach-nbg6716.c ar71xx: ZyXEL NBG6716 rfkill switch fix 2015-02-14 20:48:42 +00:00
mach-om2p.c ar71xx: fix reset button gpio for OM2P/OM2P-HS 2014-10-06 04:51:51 +00:00
mach-om5p.c ar71xx: Increase RXD/RDV to 2 on OM5P-AN 2015-04-20 15:01:00 +00:00
mach-pb42.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-pb92.c ar71xx: remove the built-in MTD map of the PB92 board 2012-03-27 19:38:05 +00:00
mach-qihoo-c301.c ar71xx: qihoo: define flash variable as static 2015-02-07 19:59:02 +00:00
mach-r6100.c Netgear R6100 support 2014-11-26 08:28:22 +00:00
mach-rb4xx.c ar71xx: register the micro sd card reader on RB493G 2013-02-10 12:31:38 +00:00
mach-rb91x.c ar71xx: rb91x: fix ethernet packet loss issues 2014-04-13 20:41:52 +00:00
mach-rb95x.c ar71xx: rb95x: use correct SPI flash address 2014-03-12 12:52:39 +00:00
mach-rb750.c ar71xx: Routerboard 751 Mac Address Offset Fix 2013-02-08 09:34:53 +00:00
mach-rb922.c ar71xx: add initial support for RB911G-5HPacD 2015-04-07 20:04:03 +00:00
mach-rb2011.c ar71xx: rb2011: apply patch to file 2015-02-07 21:10:51 +00:00
mach-rbsxtlite.c ar71xx: Add support for MikroTik RouterBOARD SXT Lite 2014-07-01 13:38:30 +00:00
mach-rw2458n.c ar71xx: rw2458n - Use eeprom (art) from wifi card 2013-03-15 14:35:50 +00:00
mach-smart-300.c add support for the NC-LINK SMART-300 2014-08-11 11:44:51 +00:00
mach-tew-632brp.c ar71xx: TEW632BRP has buttons 'active low', fix board config 2013-07-28 10:23:22 +00:00
mach-tew-673gru.c ar71xx: tew-673gru: use ath79_parse_ascii_mac helper 2013-09-20 16:41:34 +00:00
mach-tew-712br.c ar71xx: tew-712br: use ath79_parse_ascii_mac helper 2013-09-20 16:41:36 +00:00
mach-tew-732br.c ar71xx: add kernel support for the TEW-732BR board 2013-09-23 09:49:01 +00:00
mach-tl-mr3x20.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-tl-mr11u.c ar71xx: improve kernel support for the TL-MR3040 v2 2013-09-25 18:42:10 +00:00
mach-tl-mr13u.c ar71xx: Fix LED polarity for the TP-LINK TL-MR13U. 2015-03-10 13:26:50 +00:00
mach-tl-mr3020.c ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 2013-01-07 14:30:37 +00:00
mach-tl-wa701nd-v2.c ar71xx: add support for TL-WA701ND v2 2015-01-20 15:48:07 +00:00
mach-tl-wa830re-v2.c ar71xx: added support for TL-WA830RE V2 2014-07-13 07:12:22 +00:00
mach-tl-wa901nd-v2.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-tl-wa901nd.c ar71xx: fix tl-wa901nd buttons code 2013-08-05 09:09:39 +00:00
mach-tl-wa7210n-v2.c ar71xx: TL-WA7210n v2 support 2015-02-24 12:00:50 +00:00
mach-tl-wax50re.c ar71xx: add support for TP-LINK TL-WA860RE v1 2014-07-13 10:03:41 +00:00
mach-tl-wdr3500.c ar71xx: fix ethernet LEDs on the TL-WDR3500 2013-03-25 06:40:03 +00:00
mach-tl-wdr4300.c ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions 2015-03-15 19:39:47 +00:00
mach-tl-wr703n.c ar71xx: fix typo in tl-wr710n mac setup (fixes #16469) 2014-05-24 08:01:33 +00:00
mach-tl-wr720n-v3.c ar71xx: add kernel support for TPLINK WR720N v3 2013-04-26 17:00:48 +00:00
mach-tl-wr741nd-v4.c ar71xx: add support for WIFI button on tp-link tl-mr3220v2 2013-06-04 13:25:54 +00:00
mach-tl-wr741nd.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-tl-wr841n-v8.c ar71xx: add support for the TP-LINK TL-WR941ND v5 2015-02-04 06:10:20 +00:00
mach-tl-wr841n-v9.c ar71xx: add support for the TP-LINK TL-WR841N/ND v9 2014-04-07 08:00:02 +00:00
mach-tl-wr841n.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-tl-wr941nd.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-tl-wr1041n-v2.c generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 2012-12-22 12:12:35 +00:00
mach-tl-wr1043nd-v2.c wr1043nd-v2: Change .code of the wi-fi button to KEY_RFKILL 2014-10-14 19:01:21 +00:00
mach-tl-wr1043nd.c ar71xx: init switch hw_reset on the TL-WR1043ND board 2012-08-02 09:54:28 +00:00
mach-tl-wr2543n.c ar71xx: fix comment style in mach-tl-wr2543n.c 2012-08-22 12:42:59 +00:00
mach-tube2h.c ar71xx: Ext LNA patch for TUBE2H and HORNET-UB targets 2015-03-12 10:06:53 +00:00
mach-ubnt.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-whr-hp-g300n.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-wlae-ag300n.c ar71xx: Buffalo WLAE-AG300N initial support 2012-08-01 12:24:52 +00:00
mach-wlr8100.c ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boards 2014-07-13 19:44:00 +00:00
mach-wndap360.c ar71xx: WNDAP360 adding wifi LED support 2014-06-02 15:02:54 +00:00
mach-wndr3700.c ar71xx: use netgear prefix for WNDR3700 LED names 2013-09-21 15:55:50 +00:00
mach-wndr4300.c ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machines 2014-07-21 18:41:52 +00:00
mach-wnr2000-v3.c ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633) 2015-01-30 08:06:40 +00:00
mach-wnr2000-v4.c ar71xx: fix ethernet on wnr2000-v4 2015-05-08 12:23:45 +00:00
mach-wnr2000.c ar71xx: use netgear prefix for WNR2000 LED names 2013-09-21 15:55:51 +00:00
mach-wnr2200.c ar71xx: use netgear prefix for WNR2200 LED names 2013-09-21 15:55:52 +00:00
mach-wp543.c ar71xx: wp543: set active_low flag for the buttons 2014-01-26 14:55:32 +00:00
mach-wpe72.c ar71xx: wpe72: set active_low flag for the reset button 2014-01-26 14:55:34 +00:00
mach-wpj344.c ar71xx: fix leds and gpio on wpj344 2015-04-29 20:04:46 +00:00
mach-wpj558.c ar71xx: wpj588: add missing usb support 2015-03-10 16:11:39 +00:00
mach-wrt160nl.c ar71xx: rename wrt160nl's trx partition parser 2015-03-11 15:56:15 +00:00
mach-wrt400n.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-wzr-450hp2.c ar71xx: add support for buffalo WZR-450HP2 2014-10-22 11:02:18 +00:00
mach-wzr-hp-ag300h.c ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp 2013-07-14 14:05:27 +00:00
mach-wzr-hp-g300nh.c ar71xx: use uimage split for WZR-HP-G300NH 2013-07-14 14:05:23 +00:00
mach-wzr-hp-g300nh2.c ar71xx: use uimage split for WZR-HP-G300NH2 2013-07-14 14:05:31 +00:00
mach-wzr-hp-g450h.c ath9k: merge initval and tx gain table updates, calibration fixes 2013-12-08 14:48:30 +00:00
mach-zcn-1523h.c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 2012-11-04 22:08:54 +00:00
nvram.c ar71xx: allow ath79_nvram_parse_mac_addr parsing mac with quotes 2014-07-13 19:43:54 +00:00
nvram.h ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
pci-ath9k-fixup.c ar71xx: remove superfluous include of asm/mach-ath79/pci.h 2012-06-19 10:13:43 +00:00
pci-ath9k-fixup.h ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
routerboot.c ar71xx: routerboot: export extended wlan data via sysfs 2015-04-07 20:03:43 +00:00
routerboot.h ar71xx: routerboot: add support for extended radio data 2015-04-07 20:03:35 +00:00