openwrtv4/target/linux/ipq806x/patches-4.4/036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch
Ram Chandra Jangir 5e49c57956 ipq806x: Add support for linux-4.4
1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
2016-05-27 15:50:17 +02:00

36 lines
965 B
Diff

From f212be3a6134db8dd7c5f6f0987536a669401fae Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 14 Aug 2015 11:17:20 -0700
Subject: [PATCH 2/3] ARM: qcom: add SMEM device node to IPQ806x dts
SMEM is used on IPQ806x to store various board related information such
as boot device and flash partition layout. We'll declare it as a device
so we can make use of it thanks to the new SMEM soc driver.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -55,7 +55,7 @@
no-map;
};
- smem@41000000 {
+ smem: smem@41000000 {
reg = <0x41000000 0x200000>;
no-map;
};
@@ -341,4 +341,10 @@
#hwlock-cells = <1>;
};
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem>;
+ hwlocks = <&sfpb_mutex 3>;
+ };
};