KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ipq806x: Add support for linux-4.4

Browse source 
1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
This commit is contained in:
Ram Chandra Jangir 2016-05-21 14:48:31 +05:30 committed by John Crispin
parent 955c341d3b
commit 5e49c57956
137 changed files with 628 additions and 24887 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
target/linux/ipq806x/Makefile
View file

@ -17,7 +17,9 @@ KERNELNAME:=zImage Image dtbs
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform
kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform \
kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
kmod-ath10k ath10k-firmware-qca99x0 wpad-mini
$(eval $(call BuildTarget))

450
target/linux/ipq806x/config-3.18
View file

@ -1,450 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_AMBA_PL08X is not set
# CONFIG_APM_EMULATION is not set
CONFIG_APQ_GCC_8084=y
CONFIG_APQ_MMCC_8084=y
CONFIG_AR8216_PHY=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_QCOM_CPUFREQ=y
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_AT803X_PHY=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_BOUNCE=y
CONFIG_BUILD_BIN2C=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CLEANCACHE=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_COMPACTION=y
CONFIG_COREDUMP=y
# CONFIG_CPUFREQ_DT is not set
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
# CONFIG_CPU_THERMAL is not set
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
# CONFIG_CRYPTO_SHA1_ARM_NEON is not set
# CONFIG_CRYPTO_SHA512_ARM_NEON is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_XZ=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_GPIO=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_UART_PL01X is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DTC=y
# CONFIG_DWMAC_GENERIC is not set
CONFIG_DWMAC_IPQ806X=y
# CONFIG_DWMAC_LPC18XX is not set
# CONFIG_DWMAC_MESON is not set
# CONFIG_DWMAC_ROCKCHIP is not set
# CONFIG_DWMAC_SOCFPGA is not set
# CONFIG_DWMAC_STI is not set
# CONFIG_DWMAC_SUNXI is not set
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_FREEZER=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CPUFREQ_KRAIT=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_DEVRES=y
# CONFIG_GPIO_MSM_V2 is not set
CONFIG_GPIO_SYSFS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_BPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_HWMON=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_MSM=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_QUP=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOMMU_API=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_PGTABLES_L2=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_IPQ_GCC_806X=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KPSS_XCC=y
CONFIG_KRAITCC=y
CONFIG_KRAIT_CLOCKS=y
CONFIG_KRAIT_L2_ACCESSORS=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LIBFDT=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MDIO_GPIO=y
CONFIG_MFD_QCOM_RPM=y
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MIGRATION=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_GCC_8960=y
CONFIG_MSM_GCC_8974=y
CONFIG_MSM_IOMMU=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_IMPA7 is not set
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_QCOM_SMEM_PARTS=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=4
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IOMMU=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_DW=y
CONFIG_PCIE_QCOM=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_MSI=y
CONFIG_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
CONFIG_PHY_QCOM_IPQ806X_SATA=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_APQ8064=y
# CONFIG_PINCTRL_APQ8084 is not set
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_MSM8960 is not set
CONFIG_PINCTRL_MSM8X74=y
# CONFIG_PL330_DMA is not set
CONFIG_PM=y
CONFIG_PM_CLK=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_OPP=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
CONFIG_POWER_RESET_MSM=y
# CONFIG_POWER_RESET_SYSCON is not set
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_RCU=y
CONFIG_PRINTK_TIME=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_QCOM_ADM=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_WDT=y
CONFIG_RAS=y
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RD_GZIP=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_QCOM_RPM=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_QUP=y
CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_STOP_MACHINE=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SWCONFIG=y
CONFIG_SWIOTLB=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_STATS=y
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_XZ=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UID16=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_VFIO is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_WL_TI is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZONE_DMA_FLAG=0

53
target/linux/ipq806x/config-4.1 → target/linux/ipq806x/config-4.4
View file

@ -41,7 +41,7 @@ CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_CCI=y
CONFIG_ARM_CCI400_COMMON=y
CONFIG_ARM_CCI400_PMU=y
# CONFIG_ARM_CPUIDLE is not set
CONFIG_ARM_CCI_PMU=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
@ -49,6 +49,7 @@ CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_PMU=y
CONFIG_ARM_QCOM_CPUFREQ=y
# CONFIG_ARM_SMMU is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
@ -65,6 +66,7 @@ CONFIG_BUILD_BIN2C=y
CONFIG_CLEANCACHE=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
@ -83,18 +85,13 @@ CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_IDLE=y
@ -131,16 +128,14 @@ CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DTC=y
# CONFIG_DWMAC_GENERIC is not set
CONFIG_DWMAC_IPQ806X=y
# CONFIG_DWMAC_LPC18XX is not set
# CONFIG_DWMAC_MESON is not set
# CONFIG_DWMAC_ROCKCHIP is not set
# CONFIG_DWMAC_SOCFPGA is not set
# CONFIG_DWMAC_STI is not set
# CONFIG_DWMAC_SUNXI is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FREEZER=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
@ -163,7 +158,6 @@ CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_DEVRES=y
# CONFIG_GPIO_MSM_V2 is not set
CONFIG_GPIO_SYSFS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
@ -221,7 +215,6 @@ CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_HOTPLUG_CPU=y
# CONFIG_HSU_DMA_PCI is not set
CONFIG_HWMON=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
@ -265,6 +258,7 @@ CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MIGRATION=y
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MSM_GCC_8660=y
# CONFIG_MSM_GCC_8916 is not set
@ -292,9 +286,12 @@ CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_AR8XXX is not set
CONFIG_NET_DSA_HWMON=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
@ -315,13 +312,11 @@ CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_DW=y
# CONFIG_PCIE_IPROC is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_QCOM=y
CONFIG_PCI_DEBUG=y
@ -340,19 +335,23 @@ CONFIG_PINCTRL_APQ8064=y
# CONFIG_PINCTRL_APQ8084 is not set
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_MSM8660 is not set
# CONFIG_PINCTRL_MSM8916 is not set
# CONFIG_PINCTRL_MSM8960 is not set
CONFIG_PINCTRL_MSM8X74=y
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PL330_DMA is not set
CONFIG_PM=y
CONFIG_PM_CLK=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_OPP=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMSTB is not set
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
@ -365,12 +364,17 @@ CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_QCOM_ADM=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y
# CONFIG_QCOM_PM is not set
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_32=y
# CONFIG_QCOM_SMD is not set
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_WDT=y
CONFIG_RAS=y
CONFIG_RATIONAL=y
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_STALL_COMMON=y
@ -379,6 +383,7 @@ CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_QCOM_RPM=y
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
@ -387,14 +392,13 @@ CONFIG_RTC_CLASS=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
@ -406,7 +410,6 @@ CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_SRCU=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_STOP_MACHINE=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
@ -415,13 +418,8 @@ CONFIG_SWIOTLB=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THUMB2_KERNEL is not set
@ -433,7 +431,6 @@ CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_XZ=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UID16=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_USB_SUPPORT=y
@ -444,8 +441,6 @@ CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_WL_TI is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_XPS=y

5
target/linux/ipq806x/image/Makefile
View file

@ -93,6 +93,7 @@ define Device/AP148
BLOCKSIZE := 128KiB
PAGESIZE := 2048
BOARD_NAME := ap148
DEVICE_TITLE := Qualcom AP148
endef
define Device/AP148-legacy
@ -102,6 +103,7 @@ define Device/AP148-legacy
BLOCKSIZE := 128KiB
PAGESIZE := 2048
BOARD_NAME := ap148
DEVICE_TITLE := Qualcom AP148 (legacy)
endef
define Device/D7800
@ -113,6 +115,7 @@ define Device/D7800
BLOCKSIZE := 128KiB
PAGESIZE := 2048
BOARD_NAME := d7800
DEVICE_TITLE := Netgear Nighthawk X4 D7800
endef
define Device/DB149
@ -120,6 +123,7 @@ define Device/DB149
DEVICE_DTS := qcom-ipq8064-db149
KERNEL_INSTALL := 1
BOARD_NAME := db149
DEVICE_TITLE := Qualcom DB149
endef
define Device/R7500
@ -131,6 +135,7 @@ define Device/R7500
BLOCKSIZE := 128KiB
PAGESIZE := 2048
BOARD_NAME := r7500
DEVICE_TITLE := Netgear Nighthawk X4 R7500
endef
TARGET_DEVICES += AP148 AP148-legacy D7800 DB149 R7500

522
target/linux/ipq806x/patches-3.18/001-spi-qup-Add-DMA-capabilities.patch
View file

@ -1,522 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: spi: qup: Add DMA capabilities
From: Andy Gross <agross@codeaurora.org>
X-Patchwork-Id: 4432401
Message-Id: <1403816781-31008-1-git-send-email-agross@codeaurora.org>
To: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, Sagar Dharia <sdharia@codeaurora.org>,
Daniel Sneddon <dsneddon@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@sonymobile.com>,
"Ivan T. Ivanov" <iivanov@mm-sol.com>,
linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, Andy Gross <agross@codeaurora.org>
Date: Thu, 26 Jun 2014 16:06:21 -0500
This patch adds DMA capabilities to the spi-qup driver. If DMA channels are
present, the QUP will use DMA instead of block mode for transfers to/from SPI
peripherals for transactions larger than the length of a block.
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
.../devicetree/bindings/spi/qcom,spi-qup.txt | 10 +
drivers/spi/spi-qup.c | 361 ++++++++++++++++++--
2 files changed, 350 insertions(+), 21 deletions(-)
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -27,6 +27,11 @@ Optional properties:
- spi-max-frequency: Specifies maximum SPI clock frequency,
Units - Hz. Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
+- dmas : Two DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
+- dma-names: Names for the dma channels, if present. There must be at
+ least one channel named "tx" for transmit and named "rx" for
+ receive.
- num-cs: total number of chipselects
- cs-gpios: should specify GPIOs used for chipselects.
The gpios will be referred to as reg = <index> in the SPI child
@@ -51,6 +56,10 @@ Example:
clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp2_bam 2>,
+ <&blsp2_bam 3>;
+ dma-names = "rx", "tx";
+
pinctrl-names = "default";
pinctrl-0 = <&spi8_default>;
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -22,6 +22,8 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#define QUP_CONFIG 0x0000
#define QUP_STATE 0x0004
@@ -116,6 +118,8 @@
#define SPI_NUM_CHIPSELECTS 4
+#define SPI_MAX_XFER (SZ_64K - 64)
+
/* high speed mode is when bus rate is greater then 26MHz */
#define SPI_HS_MIN_RATE 26000000
#define SPI_MAX_RATE 50000000
@@ -143,6 +147,17 @@ struct spi_qup {
int tx_bytes;
int rx_bytes;
int qup_v1;
+
+ int use_dma;
+
+ struct dma_chan *rx_chan;
+ struct dma_slave_config rx_conf;
+ struct dma_chan *tx_chan;
+ struct dma_slave_config tx_conf;
+ dma_addr_t rx_dma;
+ dma_addr_t tx_dma;
+ void *dummy;
+ atomic_t dma_outstanding;
};
@@ -266,6 +281,221 @@ static void spi_qup_fifo_write(struct sp
}
}
+static void qup_dma_callback(void *data)
+{
+ struct spi_qup *controller = data;
+
+ if (atomic_dec_and_test(&controller->dma_outstanding))
+ complete(&controller->done);
+}
+
+static int spi_qup_do_dma(struct spi_qup *controller, struct spi_transfer *xfer)
+{
+ struct dma_async_tx_descriptor *rxd, *txd;
+ dma_cookie_t rx_cookie, tx_cookie;
+ u32 xfer_len, rx_align = 0, tx_align = 0, n_words;
+ struct scatterlist tx_sg[2], rx_sg[2];
+ int ret = 0;
+ u32 bytes_to_xfer = xfer->len;
+ u32 offset = 0;
+ u32 rx_nents = 0, tx_nents = 0;
+ dma_addr_t rx_dma = 0, tx_dma = 0, rx_dummy_dma = 0, tx_dummy_dma = 0;
+
+
+ if (xfer->rx_buf) {
+ rx_dma = dma_map_single(controller->dev, xfer->rx_buf,
+ xfer->len, DMA_FROM_DEVICE);
+
+ if (dma_mapping_error(controller->dev, rx_dma)) {
+ ret = -ENOMEM;
+ return ret;
+ }
+
+ /* check to see if we need dummy buffer for leftover bytes */
+ rx_align = xfer->len % controller->in_blk_sz;
+ if (rx_align) {
+ rx_dummy_dma = dma_map_single(controller->dev,
+ controller->dummy, controller->in_fifo_sz,
+ DMA_FROM_DEVICE);
+
+ if (dma_mapping_error(controller->dev, rx_dummy_dma)) {
+ ret = -ENOMEM;
+ goto err_map_rx_dummy;
+ }
+ }
+ }
+
+ if (xfer->tx_buf) {
+ tx_dma = dma_map_single(controller->dev,
+ (void *)xfer->tx_buf, xfer->len, DMA_TO_DEVICE);
+
+ if (dma_mapping_error(controller->dev, tx_dma)) {
+ ret = -ENOMEM;
+ goto err_map_tx;
+ }
+
+ /* check to see if we need dummy buffer for leftover bytes */
+ tx_align = xfer->len % controller->out_blk_sz;
+ if (tx_align) {
+ memcpy(controller->dummy + SZ_1K,
+ xfer->tx_buf + xfer->len - tx_align,
+ tx_align);
+ memset(controller->dummy + SZ_1K + tx_align, 0,
+ controller->out_blk_sz - tx_align);
+
+ tx_dummy_dma = dma_map_single(controller->dev,
+ controller->dummy + SZ_1K,
+ controller->out_blk_sz, DMA_TO_DEVICE);
+
+ if (dma_mapping_error(controller->dev, tx_dummy_dma)) {
+ ret = -ENOMEM;
+ goto err_map_tx_dummy;
+ }
+ }
+ }
+
+ atomic_set(&controller->dma_outstanding, 0);
+
+ while (bytes_to_xfer > 0) {
+ xfer_len = min_t(u32, bytes_to_xfer, SPI_MAX_XFER);
+ n_words = DIV_ROUND_UP(xfer_len, controller->w_size);
+
+ /* write out current word count to controller */
+ writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
+ writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
+
+ reinit_completion(&controller->done);
+
+ if (xfer->tx_buf) {
+ /* recalc align for each transaction */
+ tx_align = xfer_len % controller->out_blk_sz;
+
+ if (tx_align)
+ tx_nents = 2;
+ else
+ tx_nents = 1;
+
+ /* initialize scatterlists */
+ sg_init_table(tx_sg, tx_nents);
+ sg_dma_len(&tx_sg[0]) = xfer_len - tx_align;
+ sg_dma_address(&tx_sg[0]) = tx_dma + offset;
+
+ /* account for non block size transfer */
+ if (tx_align) {
+ sg_dma_len(&tx_sg[1]) = controller->out_blk_sz;
+ sg_dma_address(&tx_sg[1]) = tx_dummy_dma;
+ }
+
+ txd = dmaengine_prep_slave_sg(controller->tx_chan,
+ tx_sg, tx_nents, DMA_MEM_TO_DEV, 0);
+ if (!txd) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ atomic_inc(&controller->dma_outstanding);
+
+ txd->callback = qup_dma_callback;
+ txd->callback_param = controller;
+
+ tx_cookie = dmaengine_submit(txd);
+
+ dma_async_issue_pending(controller->tx_chan);
+ }
+
+ if (xfer->rx_buf) {
+ /* recalc align for each transaction */
+ rx_align = xfer_len % controller->in_blk_sz;
+
+ if (rx_align)
+ rx_nents = 2;
+ else
+ rx_nents = 1;
+
+ /* initialize scatterlists */
+ sg_init_table(rx_sg, rx_nents);
+ sg_dma_address(&rx_sg[0]) = rx_dma + offset;
+ sg_dma_len(&rx_sg[0]) = xfer_len - rx_align;
+
+ /* account for non block size transfer */
+ if (rx_align) {
+ sg_dma_len(&rx_sg[1]) = controller->in_blk_sz;
+ sg_dma_address(&rx_sg[1]) = rx_dummy_dma;
+ }
+
+ rxd = dmaengine_prep_slave_sg(controller->rx_chan,
+ rx_sg, rx_nents, DMA_DEV_TO_MEM, 0);
+ if (!rxd) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ atomic_inc(&controller->dma_outstanding);
+
+ rxd->callback = qup_dma_callback;
+ rxd->callback_param = controller;
+
+ rx_cookie = dmaengine_submit(rxd);
+
+ dma_async_issue_pending(controller->rx_chan);
+ }
+
+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
+ dev_warn(controller->dev, "cannot set EXECUTE state\n");
+ goto err_unmap;
+ }
+
+ if (!wait_for_completion_timeout(&controller->done,
+ msecs_to_jiffies(1000))) {
+ ret = -ETIMEDOUT;
+
+ /* clear out all the DMA transactions */
+ if (xfer->tx_buf)
+ dmaengine_terminate_all(controller->tx_chan);
+ if (xfer->rx_buf)
+ dmaengine_terminate_all(controller->rx_chan);
+
+ goto err_unmap;
+ }
+
+ if (rx_align)
+ memcpy(xfer->rx_buf + offset + xfer->len - rx_align,
+ controller->dummy, rx_align);
+
+ /* adjust remaining bytes to transfer */
+ bytes_to_xfer -= xfer_len;
+ offset += xfer_len;
+
+
+ /* reset mini-core state so we can program next transaction */
+ if (spi_qup_set_state(controller, QUP_STATE_RESET)) {
+ dev_err(controller->dev, "cannot set RESET state\n");
+ goto err_unmap;
+ }
+ }
+
+ ret = 0;
+
+err_unmap:
+ if (tx_align)
+ dma_unmap_single(controller->dev, tx_dummy_dma,
+ controller->out_fifo_sz, DMA_TO_DEVICE);
+err_map_tx_dummy:
+ if (xfer->tx_buf)
+ dma_unmap_single(controller->dev, tx_dma, xfer->len,
+ DMA_TO_DEVICE);
+err_map_tx:
+ if (rx_align)
+ dma_unmap_single(controller->dev, rx_dummy_dma,
+ controller->in_fifo_sz, DMA_FROM_DEVICE);
+err_map_rx_dummy:
+ if (xfer->rx_buf)
+ dma_unmap_single(controller->dev, rx_dma, xfer->len,
+ DMA_FROM_DEVICE);
+
+ return ret;
+}
+
static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
{
struct spi_qup *controller = dev_id;
@@ -315,11 +545,13 @@ static irqreturn_t spi_qup_qup_irq(int i
error = -EIO;
}
- if (opflags & QUP_OP_IN_SERVICE_FLAG)
- spi_qup_fifo_read(controller, xfer);
+ if (!controller->use_dma) {
+ if (opflags & QUP_OP_IN_SERVICE_FLAG)
+ spi_qup_fifo_read(controller, xfer);
- if (opflags & QUP_OP_OUT_SERVICE_FLAG)
- spi_qup_fifo_write(controller, xfer);
+ if (opflags & QUP_OP_OUT_SERVICE_FLAG)
+ spi_qup_fifo_write(controller, xfer);
+ }
spin_lock_irqsave(&controller->lock, flags);
controller->error = error;
@@ -339,6 +571,8 @@ static int spi_qup_io_config(struct spi_
struct spi_qup *controller = spi_master_get_devdata(spi->master);
u32 config, iomode, mode;
int ret, n_words, w_size;
+ size_t dma_align = dma_get_cache_alignment();
+ u32 dma_available = 0;
if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
dev_err(controller->dev, "too big size for loopback %d > %d\n",
@@ -367,6 +601,11 @@ static int spi_qup_io_config(struct spi_
n_words = xfer->len / w_size;
controller->w_size = w_size;
+ if (controller->rx_chan &&
+ IS_ALIGNED((size_t)xfer->tx_buf, dma_align) &&
+ IS_ALIGNED((size_t)xfer->rx_buf, dma_align))
+ dma_available = 1;
+
if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
mode = QUP_IO_M_MODE_FIFO;
writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
@@ -374,19 +613,31 @@ static int spi_qup_io_config(struct spi_
/* must be zero for FIFO */
writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
- } else {
+ controller->use_dma = 0;
+ } else if (!dma_available) {
mode = QUP_IO_M_MODE_BLOCK;
writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
/* must be zero for BLOCK and BAM */
writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
+ controller->use_dma = 0;
+ } else {
+ mode = QUP_IO_M_MODE_DMOV;
+ writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
+ writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
+ controller->use_dma = 1;
}
iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
/* Set input and output transfer mode */
iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK);
- iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
+
+ if (!controller->use_dma)
+ iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
+ else
+ iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN;
+
iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
@@ -419,6 +670,14 @@ static int spi_qup_io_config(struct spi_
config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N);
config |= xfer->bits_per_word - 1;
config |= QUP_CONFIG_SPI_MODE;
+
+ if (controller->use_dma) {
+ if (!xfer->tx_buf)
+ config |= QUP_CONFIG_NO_OUTPUT;
+ if (!xfer->rx_buf)
+ config |= QUP_CONFIG_NO_INPUT;
+ }
+
writel_relaxed(config, controller->base + QUP_CONFIG);
/* only write to OPERATIONAL_MASK when register is present */
@@ -452,25 +711,29 @@ static int spi_qup_transfer_one(struct s
controller->tx_bytes = 0;
spin_unlock_irqrestore(&controller->lock, flags);
- if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
- dev_warn(controller->dev, "cannot set RUN state\n");
- goto exit;
- }
+ if (controller->use_dma) {
+ ret = spi_qup_do_dma(controller, xfer);
+ } else {
+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
+ dev_warn(controller->dev, "cannot set RUN state\n");
+ goto exit;
+ }
- if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) {
- dev_warn(controller->dev, "cannot set PAUSE state\n");
- goto exit;
- }
+ if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) {
+ dev_warn(controller->dev, "cannot set PAUSE state\n");
+ goto exit;
+ }
- spi_qup_fifo_write(controller, xfer);
+ spi_qup_fifo_write(controller, xfer);
- if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
- dev_warn(controller->dev, "cannot set EXECUTE state\n");
- goto exit;
- }
+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
+ dev_warn(controller->dev, "cannot set EXECUTE state\n");
+ goto exit;
+ }
- if (!wait_for_completion_timeout(&controller->done, timeout))
- ret = -ETIMEDOUT;
+ if (!wait_for_completion_timeout(&controller->done, timeout))
+ ret = -ETIMEDOUT;
+ }
exit:
spi_qup_set_state(controller, QUP_STATE_RESET);
spin_lock_irqsave(&controller->lock, flags);
@@ -554,6 +817,7 @@ static int spi_qup_probe(struct platform
master->transfer_one = spi_qup_transfer_one;
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
+ master->dma_alignment = dma_get_cache_alignment();
platform_set_drvdata(pdev, master);
@@ -619,6 +883,56 @@ static int spi_qup_probe(struct platform
QUP_ERROR_INPUT_UNDER_RUN | QUP_ERROR_OUTPUT_UNDER_RUN,
base + QUP_ERROR_FLAGS_EN);
+ /* allocate dma resources, if available */
+ controller->rx_chan = dma_request_slave_channel(&pdev->dev, "rx");
+ if (controller->rx_chan) {
+ controller->tx_chan =
+ dma_request_slave_channel(&pdev->dev, "tx");
+
+ if (!controller->tx_chan) {
+ dev_err(&pdev->dev, "Failed to allocate dma tx chan");
+ dma_release_channel(controller->rx_chan);
+ }
+
+ /* set DMA parameters */
+ controller->rx_conf.device_fc = 1;
+ controller->rx_conf.src_addr = res->start + QUP_INPUT_FIFO;
+ controller->rx_conf.src_maxburst = controller->in_blk_sz;
+
+ controller->tx_conf.device_fc = 1;
+ controller->tx_conf.dst_addr = res->start + QUP_OUTPUT_FIFO;
+ controller->tx_conf.dst_maxburst = controller->out_blk_sz;
+
+ if (dmaengine_slave_config(controller->rx_chan,
+ &controller->rx_conf)) {
+ dev_err(&pdev->dev, "failed to configure RX channel\n");
+
+ dma_release_channel(controller->rx_chan);
+ dma_release_channel(controller->tx_chan);
+ controller->tx_chan = NULL;
+ controller->rx_chan = NULL;
+ } else if (dmaengine_slave_config(controller->tx_chan,
+ &controller->tx_conf)) {
+ dev_err(&pdev->dev, "failed to configure TX channel\n");
+
+ dma_release_channel(controller->rx_chan);
+ dma_release_channel(controller->tx_chan);
+ controller->tx_chan = NULL;
+ controller->rx_chan = NULL;
+ }
+
+ controller->dummy = devm_kmalloc(controller->dev, PAGE_SIZE,
+ GFP_KERNEL);
+
+ if (!controller->dummy) {
+ dma_release_channel(controller->rx_chan);
+ dma_release_channel(controller->tx_chan);
+ controller->tx_chan = NULL;
+ controller->rx_chan = NULL;
+ }
+ }
+
+
writel_relaxed(0, base + SPI_CONFIG);
writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL);
@@ -731,6 +1045,11 @@ static int spi_qup_remove(struct platfor
if (ret)
return ret;
+ if (controller->rx_chan)
+ dma_release_channel(controller->rx_chan);
+ if (controller->tx_chan)
+ dma_release_channel(controller->tx_chan);
+
clk_disable_unprepare(controller->cclk);
clk_disable_unprepare(controller->iclk);

376
target/linux/ipq806x/patches-3.18/002-v3-spi-qup-Fix-incorrect-block-transfers.patch
View file

@ -1,376 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3] spi: qup: Fix incorrect block transfers
From: Andy Gross <agross@codeaurora.org>
X-Patchwork-Id: 5007321
Message-Id: <1412112088-25928-1-git-send-email-agross@codeaurora.org>
To: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org,
"Ivan T. Ivanov" <iivanov@mm-sol.com>,
Bjorn Andersson <bjorn.andersson@sonymobile.com>,
Kumar Gala <galak@codeaurora.org>, Andy Gross <agross@codeaurora.org>
Date: Tue, 30 Sep 2014 16:21:28 -0500
This patch fixes a number of errors with the QUP block transfer mode. Errors
manifested themselves as input underruns, output overruns, and timed out
transactions.
The block mode does not require the priming that occurs in FIFO mode. At the
moment that the QUP is placed into the RUN state, the QUP will immediately raise
an interrupt if the request is a write. Therefore, there is no need to prime
the pump.
In addition, the block transfers require that whole blocks of data are
read/written at a time. The last block of data that completes a transaction may
contain less than a full blocks worth of data.
Each block of data results in an input/output service interrupt accompanied with
a input/output block flag set. Additional block reads/writes require clearing
of the service flag. It is ok to check for additional blocks of data in the
ISR, but you have to ack every block you transfer. Imbalanced acks result in
early return from complete transactions with pending interrupts that still have
to be ack'd. The next transaction can be affected by these interrupts.
Transactions are deemed complete when the MAX_INPUT or MAX_OUTPUT flag are set.
Changes from v2:
- Added in additional completion check so that transaction done is not
prematurely signaled.
- Fixed various review comments.
Changes from v1:
- Split out read/write block function.
- Removed extraneous checks for transfer length
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
drivers/spi/spi-qup.c | 201 ++++++++++++++++++++++++++++++++++++-------------
1 file changed, 148 insertions(+), 53 deletions(-)
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -82,6 +82,8 @@
#define QUP_IO_M_MODE_BAM 3
/* QUP_OPERATIONAL fields */
+#define QUP_OP_IN_BLOCK_READ_REQ BIT(13)
+#define QUP_OP_OUT_BLOCK_WRITE_REQ BIT(12)
#define QUP_OP_MAX_INPUT_DONE_FLAG BIT(11)
#define QUP_OP_MAX_OUTPUT_DONE_FLAG BIT(10)
#define QUP_OP_IN_SERVICE_FLAG BIT(9)
@@ -147,6 +149,7 @@ struct spi_qup {
int tx_bytes;
int rx_bytes;
int qup_v1;
+ int mode;
int use_dma;
@@ -213,30 +216,14 @@ static int spi_qup_set_state(struct spi_
return 0;
}
-
-static void spi_qup_fifo_read(struct spi_qup *controller,
- struct spi_transfer *xfer)
+static void spi_qup_fill_read_buffer(struct spi_qup *controller,
+ struct spi_transfer *xfer, u32 data)
{
u8 *rx_buf = xfer->rx_buf;
- u32 word, state;
- int idx, shift, w_size;
-
- w_size = controller->w_size;
-
- while (controller->rx_bytes < xfer->len) {
-
- state = readl_relaxed(controller->base + QUP_OPERATIONAL);
- if (0 == (state & QUP_OP_IN_FIFO_NOT_EMPTY))
- break;
-
- word = readl_relaxed(controller->base + QUP_INPUT_FIFO);
-
- if (!rx_buf) {
- controller->rx_bytes += w_size;
- continue;
- }
+ int idx, shift;
- for (idx = 0; idx < w_size; idx++, controller->rx_bytes++) {
+ if (rx_buf)
+ for (idx = 0; idx < controller->w_size; idx++) {
/*
* The data format depends on bytes per SPI word:
* 4 bytes: 0x12345678
@@ -244,41 +231,139 @@ static void spi_qup_fifo_read(struct spi
* 1 byte : 0x00000012
*/
shift = BITS_PER_BYTE;
- shift *= (w_size - idx - 1);
- rx_buf[controller->rx_bytes] = word >> shift;
+ shift *= (controller->w_size - idx - 1);
+ rx_buf[controller->rx_bytes + idx] = data >> shift;
+ }
+
+ controller->rx_bytes += controller->w_size;
+}
+
+static void spi_qup_prepare_write_data(struct spi_qup *controller,
+ struct spi_transfer *xfer, u32 *data)
+{
+ const u8 *tx_buf = xfer->tx_buf;
+ u32 val;
+ int idx;
+
+ *data = 0;
+
+ if (tx_buf)
+ for (idx = 0; idx < controller->w_size; idx++) {
+ val = tx_buf[controller->tx_bytes + idx];
+ *data |= val << (BITS_PER_BYTE * (3 - idx));
}
+
+ controller->tx_bytes += controller->w_size;
+}
+
+static void spi_qup_fifo_read(struct spi_qup *controller,
+ struct spi_transfer *xfer)
+{
+ u32 data;
+
+ /* clear service request */
+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
+ controller->base + QUP_OPERATIONAL);
+
+ while (controller->rx_bytes < xfer->len) {
+ if (!(readl_relaxed(controller->base + QUP_OPERATIONAL) &
+ QUP_OP_IN_FIFO_NOT_EMPTY))
+ break;
+
+ data = readl_relaxed(controller->base + QUP_INPUT_FIFO);
+
+ spi_qup_fill_read_buffer(controller, xfer, data);
}
}
static void spi_qup_fifo_write(struct spi_qup *controller,
- struct spi_transfer *xfer)
+ struct spi_transfer *xfer)
{
- const u8 *tx_buf = xfer->tx_buf;
- u32 word, state, data;
- int idx, w_size;
+ u32 data;
- w_size = controller->w_size;
+ /* clear service request */
+ writel_relaxed(QUP_OP_OUT_SERVICE_FLAG,
+ controller->base + QUP_OPERATIONAL);
while (controller->tx_bytes < xfer->len) {
- state = readl_relaxed(controller->base + QUP_OPERATIONAL);
- if (state & QUP_OP_OUT_FIFO_FULL)
+ if (readl_relaxed(controller->base + QUP_OPERATIONAL) &
+ QUP_OP_OUT_FIFO_FULL)
break;
- word = 0;
- for (idx = 0; idx < w_size; idx++, controller->tx_bytes++) {
+ spi_qup_prepare_write_data(controller, xfer, &data);
+ writel_relaxed(data, controller->base + QUP_OUTPUT_FIFO);
- if (!tx_buf) {
- controller->tx_bytes += w_size;
- break;
- }
+ }
+}
- data = tx_buf[controller->tx_bytes];
- word |= data << (BITS_PER_BYTE * (3 - idx));
- }
+static void spi_qup_block_read(struct spi_qup *controller,
+ struct spi_transfer *xfer)
+{
+ u32 data;
+ u32 reads_per_blk = controller->in_blk_sz >> 2;
+ u32 num_words = (xfer->len - controller->rx_bytes) / controller->w_size;
+ int i;
+
+ do {
+ /* ACK by clearing service flag */
+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
+ controller->base + QUP_OPERATIONAL);
+
+ /* transfer up to a block size of data in a single pass */
+ for (i = 0; num_words && i < reads_per_blk; i++, num_words--) {
+
+ /* read data and fill up rx buffer */
+ data = readl_relaxed(controller->base + QUP_INPUT_FIFO);
+ spi_qup_fill_read_buffer(controller, xfer, data);
+ }
+
+ /* check to see if next block is ready */
+ if (!(readl_relaxed(controller->base + QUP_OPERATIONAL) &
+ QUP_OP_IN_BLOCK_READ_REQ))
+ break;
- writel_relaxed(word, controller->base + QUP_OUTPUT_FIFO);
- }
+ } while (num_words);
+
+ /*
+ * Due to extra stickiness of the QUP_OP_IN_SERVICE_FLAG during block
+ * reads, it has to be cleared again at the very end
+ */
+ if (readl_relaxed(controller->base + QUP_OPERATIONAL) &
+ QUP_OP_MAX_INPUT_DONE_FLAG)
+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
+ controller->base + QUP_OPERATIONAL);
+
+}
+
+static void spi_qup_block_write(struct spi_qup *controller,
+ struct spi_transfer *xfer)
+{
+ u32 data;
+ u32 writes_per_blk = controller->out_blk_sz >> 2;
+ u32 num_words = (xfer->len - controller->tx_bytes) / controller->w_size;
+ int i;
+
+ do {
+ /* ACK by clearing service flag */
+ writel_relaxed(QUP_OP_OUT_SERVICE_FLAG,
+ controller->base + QUP_OPERATIONAL);
+
+ /* transfer up to a block size of data in a single pass */
+ for (i = 0; num_words && i < writes_per_blk; i++, num_words--) {
+
+ /* swizzle the bytes for output and write out */
+ spi_qup_prepare_write_data(controller, xfer, &data);
+ writel_relaxed(data,
+ controller->base + QUP_OUTPUT_FIFO);
+ }
+
+ /* check to see if next block is ready */
+ if (!(readl_relaxed(controller->base + QUP_OPERATIONAL) &
+ QUP_OP_OUT_BLOCK_WRITE_REQ))
+ break;
+
+ } while (num_words);
}
static void qup_dma_callback(void *data)
@@ -515,9 +600,9 @@ static irqreturn_t spi_qup_qup_irq(int i
writel_relaxed(qup_err, controller->base + QUP_ERROR_FLAGS);
writel_relaxed(spi_err, controller->base + SPI_ERROR_FLAGS);
- writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
if (!xfer) {
+ writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
dev_err_ratelimited(controller->dev, "unexpected irq %08x %08x %08x\n",
qup_err, spi_err, opflags);
return IRQ_HANDLED;
@@ -546,11 +631,19 @@ static irqreturn_t spi_qup_qup_irq(int i
}
if (!controller->use_dma) {
- if (opflags & QUP_OP_IN_SERVICE_FLAG)
- spi_qup_fifo_read(controller, xfer);
+ if (opflags & QUP_OP_IN_SERVICE_FLAG) {
+ if (opflags & QUP_OP_IN_BLOCK_READ_REQ)
+ spi_qup_block_read(controller, xfer);
+ else
+ spi_qup_fifo_read(controller, xfer);
+ }
- if (opflags & QUP_OP_OUT_SERVICE_FLAG)
- spi_qup_fifo_write(controller, xfer);
+ if (opflags & QUP_OP_OUT_SERVICE_FLAG) {
+ if (opflags & QUP_OP_OUT_BLOCK_WRITE_REQ)
+ spi_qup_block_write(controller, xfer);
+ else
+ spi_qup_fifo_write(controller, xfer);
+ }
}
spin_lock_irqsave(&controller->lock, flags);
@@ -558,7 +651,8 @@ static irqreturn_t spi_qup_qup_irq(int i
controller->xfer = xfer;
spin_unlock_irqrestore(&controller->lock, flags);
- if (controller->rx_bytes == xfer->len || error)
+ if ((controller->rx_bytes == xfer->len &&
+ (opflags & QUP_OP_MAX_INPUT_DONE_FLAG)) || error)
complete(&controller->done);
return IRQ_HANDLED;
@@ -569,7 +663,7 @@ static irqreturn_t spi_qup_qup_irq(int i
static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
{
struct spi_qup *controller = spi_master_get_devdata(spi->master);
- u32 config, iomode, mode;
+ u32 config, iomode;
int ret, n_words, w_size;
size_t dma_align = dma_get_cache_alignment();
u32 dma_available = 0;
@@ -607,7 +701,7 @@ static int spi_qup_io_config(struct spi_
dma_available = 1;
if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
- mode = QUP_IO_M_MODE_FIFO;
+ controller->mode = QUP_IO_M_MODE_FIFO;
writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
/* must be zero for FIFO */
@@ -615,7 +709,7 @@ static int spi_qup_io_config(struct spi_
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
controller->use_dma = 0;
} else if (!dma_available) {
- mode = QUP_IO_M_MODE_BLOCK;
+ controller->mode = QUP_IO_M_MODE_BLOCK;
writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
/* must be zero for BLOCK and BAM */
@@ -623,7 +717,7 @@ static int spi_qup_io_config(struct spi_
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
controller->use_dma = 0;
} else {
- mode = QUP_IO_M_MODE_DMOV;
+ controller->mode = QUP_IO_M_MODE_DMOV;
writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
controller->use_dma = 1;
@@ -638,8 +732,8 @@ static int spi_qup_io_config(struct spi_
else
iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN;
- iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
- iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
+ iomode |= (controller->mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
+ iomode |= (controller->mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
writel_relaxed(iomode, controller->base + QUP_IO_M_MODES);
@@ -724,7 +818,8 @@ static int spi_qup_transfer_one(struct s
goto exit;
}
- spi_qup_fifo_write(controller, xfer);
+ if (controller->mode == QUP_IO_M_MODE_FIFO)
+ spi_qup_fifo_write(controller, xfer);
if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
dev_warn(controller->dev, "cannot set EXECUTE state\n");
@@ -741,6 +836,7 @@ exit:
if (!ret)
ret = controller->error;
spin_unlock_irqrestore(&controller->lock, flags);
+
return ret;
}

56
target/linux/ipq806x/patches-3.18/003-spi-qup-Ensure-done-detection.patch
View file

@ -1,56 +0,0 @@
From 4faba89e3ffbb1c5f6232651375b9b3212b50f02 Mon Sep 17 00:00:00 2001
From: Andy Gross <agross@codeaurora.org>
Date: Thu, 15 Jan 2015 17:56:02 -0800
Subject: [PATCH] spi: qup: Ensure done detection
This patch fixes an issue where a SPI transaction has completed, but the done
condition is missed. This occurs because at the time of interrupt the
MAX_INPUT_DONE_FLAG is not asserted. However, in the process of reading blocks
of data from the FIFO, the last portion of data comes in.
The opflags read at the beginning of the irq handler no longer matches the
current opflag state. To get around this condition, the block read function
should update the opflags so that done detection is correct after the return.
Change-Id: If109e0eeb432f96000d765c4b34dbb2269f8093f
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
drivers/spi/spi-qup.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -298,7 +298,7 @@ static void spi_qup_fifo_write(struct sp
}
static void spi_qup_block_read(struct spi_qup *controller,
- struct spi_transfer *xfer)
+ struct spi_transfer *xfer, u32 *opflags)
{
u32 data;
u32 reads_per_blk = controller->in_blk_sz >> 2;
@@ -327,10 +327,12 @@ static void spi_qup_block_read(struct sp
/*
* Due to extra stickiness of the QUP_OP_IN_SERVICE_FLAG during block
- * reads, it has to be cleared again at the very end
+ * reads, it has to be cleared again at the very end. However, be sure
+ * to refresh opflags value because MAX_INPUT_DONE_FLAG may now be
+ * present and this is used to determine if transaction is complete
*/
- if (readl_relaxed(controller->base + QUP_OPERATIONAL) &
- QUP_OP_MAX_INPUT_DONE_FLAG)
+ *opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
+ if (*opflags & QUP_OP_MAX_INPUT_DONE_FLAG)
writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
controller->base + QUP_OPERATIONAL);
@@ -633,7 +635,7 @@ static irqreturn_t spi_qup_qup_irq(int i
if (!controller->use_dma) {
if (opflags & QUP_OP_IN_SERVICE_FLAG) {
if (opflags & QUP_OP_IN_BLOCK_READ_REQ)
- spi_qup_block_read(controller, xfer);
+ spi_qup_block_read(controller, xfer, &opflags);
else
spi_qup_fifo_read(controller, xfer);
}

67
target/linux/ipq806x/patches-3.18/011-watchdog-qcom-use-timer-devicetree-binding.patch
View file

@ -1,67 +0,0 @@
From fded70251b1b58f68de1d3757ece9965f0b75452 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Thu, 19 Feb 2015 20:19:30 -0800
Subject: [PATCH 1/3] watchdog: qcom: use timer devicetree binding
MSM watchdog configuration happens in the same register block as the
timer, so we'll use the same binding as the existing timer.
The qcom-wdt will now be probed when devicetree has an entry compatible
with "qcom,kpss-timer" or "qcom-scss-timer".
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/watchdog/qcom-wdt.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -20,9 +20,9 @@
#include <linux/reboot.h>
#include <linux/watchdog.h>
-#define WDT_RST 0x0
-#define WDT_EN 0x8
-#define WDT_BITE_TIME 0x24
+#define WDT_RST 0x38
+#define WDT_EN 0x40
+#define WDT_BITE_TIME 0x5C
struct qcom_wdt {
struct watchdog_device wdd;
@@ -117,6 +117,8 @@ static int qcom_wdt_probe(struct platfor
{
struct qcom_wdt *wdt;
struct resource *res;
+ struct device_node *np = pdev->dev.of_node;
+ u32 percpu_offset;
int ret;
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
@@ -124,6 +126,14 @@ static int qcom_wdt_probe(struct platfor
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ /* We use CPU0's DGT for the watchdog */
+ if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+ percpu_offset = 0;
+
+ res->start += percpu_offset;
+ res->end += percpu_offset;
+
wdt->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
@@ -203,9 +213,8 @@ static int qcom_wdt_remove(struct platfo
}
static const struct of_device_id qcom_wdt_of_table[] = {
- { .compatible = "qcom,kpss-wdt-msm8960", },
- { .compatible = "qcom,kpss-wdt-apq8064", },
- { .compatible = "qcom,kpss-wdt-ipq8064", },
+ { .compatible = "qcom,kpss-timer" },
+ { .compatible = "qcom,scss-timer" },
{ },
};
MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);

48
target/linux/ipq806x/patches-3.18/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch
View file

@ -1,48 +0,0 @@
From 297cf8136ecd6a56520888fd28948393766b8ee7 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Thu, 19 Feb 2015 20:27:39 -0800
Subject: [PATCH 2/3] ARM: qcom: add description of KPSS WDT for IPQ8064
Add the watchdog related entries to the Krait Processor Sub-system
(KPSS) timer IPQ8064 devicetree section. Also, add a fixed-clock
description of SLEEP_CLK, which will do for now.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -60,6 +60,14 @@
};
};
+ clocks {
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -89,10 +97,14 @@
compatible = "qcom,kpss-timer", "qcom,msm-timer";
interrupts = <1 1 0x301>,
<1 2 0x301>,
- <1 3 0x301>;
+ <1 3 0x301>,
+ <1 4 0x301>,
+ <1 5 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <25000000>,
<32768>;
+ clocks = <&sleep_clk>;
+ clock-names = "sleep";
cpu-offset = <0x80000>;
};

50
target/linux/ipq806x/patches-3.18/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch
View file

@ -1,50 +0,0 @@
From e535f01dffb6dd9e09934fa219be52af3437a8f6 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Thu, 19 Feb 2015 20:36:27 -0800
Subject: [PATCH 3/3] ARM: msm: add watchdog entries to DT timer binding doc
The watchdog has been reworked to use the same DT node as the timer.
This change is updating the device tree doc accordingly.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
Documentation/devicetree/bindings/arm/msm/timer.txt | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -9,11 +9,17 @@ Properties:
"qcom,scss-timer" - scorpion subsystem
- interrupts : Interrupts for the the debug timer, the first general purpose
- timer, and optionally a second general purpose timer in that
- order.
+ timer, and optionally a second general purpose timer, and
+ optionally as well, 2 watchdog interrupts, in that order.
- reg : Specifies the base address of the timer registers.
+- clocks: Reference to the parent clocks, one per output clock. The parents
+ must appear in the same order as the clock names.
+
+- clock-names: The name of the clocks as free-form strings. They should be in
+ the same order as the clocks.
+
- clock-frequency : The frequency of the debug timer and the general purpose
timer(s) in Hz in that order.
@@ -29,9 +35,13 @@ Example:
compatible = "qcom,scss-timer", "qcom,msm-timer";
interrupts = <1 1 0x301>,
<1 2 0x301>,
- <1 3 0x301>;
+ <1 3 0x301>,
+ <1 4 0x301>,
+ <1 5 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <19200000>,
<32768>;
+ clocks = <&sleep_clk>;
+ clock-names = "sleep";
cpu-offset = <0x40000>;
};

46
target/linux/ipq806x/patches-3.18/020-add-ap148-bootargs.patch
View file

@ -1,46 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -14,6 +14,14 @@
};
};
+ alias {
+ serial0 = &uart4;
+ };
+
+ chosen {
+ linux,stdout-path = "serial0:115200n8";
+ };
+
soc {
pinmux@800000 {
i2c4_pins: i2c4_pinmux {
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -140,7 +140,7 @@
ranges;
status = "disabled";
- serial@12490000 {
+ uart2: serial@12490000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12490000 0x1000>,
<0x12480000 0x1000>;
@@ -175,7 +175,7 @@
ranges;
status = "disabled";
- serial@16340000 {
+ uart4: serial@16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,
<0x16300000 0x1000>;
@@ -209,7 +209,7 @@
ranges;
status = "disabled";
- serial@1a240000 {
+ uart5: serial@1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x1000>,
<0x1a200000 0x1000>;

160
target/linux/ipq806x/patches-3.18/022-add-db149-dts.patch
View file

@ -1,160 +0,0 @@
From a32d6e7c8fca6371a2614924b89981bc912b6378 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Tue, 7 Apr 2015 19:58:58 -0700
Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
Add basic DB149 (IPQ806x based platform) device-tree. It supports UART,
SATA, USB2, USB3 and NOR flash.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 257 +++++++++++++++++++++++++++++++
2 files changed, 258 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-db149.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -0,0 +1,132 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8064/DB149";
+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ alias {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux@800000 {
+ i2c4_pins: i2c4_pinmux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ bias-disable;
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+ };
+ };
+
+ gsbi2: gsbi@12480000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ uart2: serial@12490000 {
+ status = "ok";
+ };
+ };
+
+ gsbi5: gsbi@1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi4: spi@1a280000 {
+ status = "ok";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash: m25p80@0 {
+ compatible = "s25fl256s1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "lowlevel_init";
+ reg = <0x0 0x1b0000>;
+ };
+
+ partition@1 {
+ label = "u-boot";
+ reg = <0x1b0000 0x80000>;
+ };
+
+ partition@2 {
+ label = "u-boot-env";
+ reg = <0x230000 0x40000>;
+ };
+
+ partition@3 {
+ label = "caldata";
+ reg = <0x270000 0x40000>;
+ };
+
+ partition@4 {
+ label = "firmware";
+ reg = <0x2b0000 0x1d50000>;
+ };
+ };
+ };
+ };
+
+ sata-phy@1b400000 {
+ status = "ok";
+ };
+
+ sata@29000000 {
+ status = "ok";
+ };
+
+ phy@100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy@100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy@110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy@110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30@0 {
+ status = "ok";
+ };
+
+ usb30@1 {
+ status = "ok";
+ };
+ };
+};

53
target/linux/ipq806x/patches-3.18/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
View file

@ -1,53 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -46,15 +46,12 @@
serial@16340000 {
status = "ok";
};
-
- i2c4: i2c@16380000 {
- status = "ok";
-
- clock-frequency = <200000>;
-
- pinctrl-0 = <&i2c4_pins>;
- pinctrl-names = "default";
- };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
};
gsbi5: gsbi@1a200000 {
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -794,7 +794,7 @@ static struct clk_rcg gsbi7_qup_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_PARENT_GATE,
+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
},
},
};
@@ -810,7 +810,7 @@ static struct clk_branch gsbi7_qup_clk =
.parent_names = (const char *[]){ "gsbi7_qup_src" },
.num_parents = 1,
.ops = &clk_branch_ops,
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
},
},
};
@@ -858,7 +858,7 @@ static struct clk_branch gsbi4_h_clk = {
.hw.init = &(struct clk_init_data){
.name = "gsbi4_h_clk",
.ops = &clk_branch_ops,
- .flags = CLK_IS_ROOT,
+ .flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED,
},
},
};

167
target/linux/ipq806x/patches-3.18/030-hwspinlock-core-add-device-tree-support.patch
View file

@ -1,167 +0,0 @@
From fb7737e949e31d8a71acee6bbb670f32dbd2a2c0 Mon Sep 17 00:00:00 2001
From: Suman Anna <s-anna@ti.com>
Date: Wed, 4 Mar 2015 20:01:14 -0600
Subject: [PATCH] hwspinlock/core: add device tree support
This patch adds a new OF-friendly API of_hwspin_lock_get_id()
for hwspinlock clients to use/request locks from a hwspinlock
device instantiated through a device-tree blob. This new API
can be used by hwspinlock clients to get the id for a specific
lock using the phandle + args specifier, so that it can be
requested using the available hwspin_lock_request_specific()
API.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
[small comment clarification]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
Documentation/hwspinlock.txt | 10 +++++
drivers/hwspinlock/hwspinlock_core.c | 79 ++++++++++++++++++++++++++++++++++++
include/linux/hwspinlock.h | 7 ++++
3 files changed, 96 insertions(+)
--- a/Documentation/hwspinlock.txt
+++ b/Documentation/hwspinlock.txt
@@ -48,6 +48,16 @@ independent, drivers.
ids for predefined purposes.
Should be called from a process context (might sleep).
+ int of_hwspin_lock_get_id(struct device_node *np, int index);
+ - retrieve the global lock id for an OF phandle-based specific lock.
+ This function provides a means for DT users of a hwspinlock module
+ to get the global lock id of a specific hwspinlock, so that it can
+ be requested using the normal hwspin_lock_request_specific() API.
+ The function returns a lock id number on success, -EPROBE_DEFER if
+ the hwspinlock device is not yet registered with the core, or other
+ error values.
+ Should be called from a process context (might sleep).
+
int hwspin_lock_free(struct hwspinlock *hwlock);
- free a previously-assigned hwspinlock; returns 0 on success, or an
appropriate error code on failure (e.g. -EINVAL if the hwspinlock
--- a/drivers/hwspinlock/hwspinlock_core.c
+++ b/drivers/hwspinlock/hwspinlock_core.c
@@ -27,6 +27,7 @@
#include <linux/hwspinlock.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
+#include <linux/of.h>
#include "hwspinlock_internal.h"
@@ -257,6 +258,84 @@ void __hwspin_unlock(struct hwspinlock *
}
EXPORT_SYMBOL_GPL(__hwspin_unlock);
+/**
+ * of_hwspin_lock_simple_xlate - translate hwlock_spec to return a lock id
+ * @bank: the hwspinlock device bank
+ * @hwlock_spec: hwlock specifier as found in the device tree
+ *
+ * This is a simple translation function, suitable for hwspinlock platform
+ * drivers that only has a lock specifier length of 1.
+ *
+ * Returns a relative index of the lock within a specified bank on success,
+ * or -EINVAL on invalid specifier cell count.
+ */
+static inline int
+of_hwspin_lock_simple_xlate(const struct of_phandle_args *hwlock_spec)
+{
+ if (WARN_ON(hwlock_spec->args_count != 1))
+ return -EINVAL;
+
+ return hwlock_spec->args[0];
+}
+
+/**
+ * of_hwspin_lock_get_id() - get lock id for an OF phandle-based specific lock
+ * @np: device node from which to request the specific hwlock
+ * @index: index of the hwlock in the list of values
+ *
+ * This function provides a means for DT users of the hwspinlock module to
+ * get the global lock id of a specific hwspinlock using the phandle of the
+ * hwspinlock device, so that it can be requested using the normal
+ * hwspin_lock_request_specific() API.
+ *
+ * Returns the global lock id number on success, -EPROBE_DEFER if the hwspinlock
+ * device is not yet registered, -EINVAL on invalid args specifier value or an
+ * appropriate error as returned from the OF parsing of the DT client node.
+ */
+int of_hwspin_lock_get_id(struct device_node *np, int index)
+{
+ struct of_phandle_args args;
+ struct hwspinlock *hwlock;
+ struct radix_tree_iter iter;
+ void **slot;
+ int id;
+ int ret;
+
+ ret = of_parse_phandle_with_args(np, "hwlocks", "#hwlock-cells", index,
+ &args);
+ if (ret)
+ return ret;
+
+ /* Find the hwspinlock device: we need its base_id */
+ ret = -EPROBE_DEFER;
+ rcu_read_lock();
+ radix_tree_for_each_slot(slot, &hwspinlock_tree, &iter, 0) {
+ hwlock = radix_tree_deref_slot(slot);
+ if (unlikely(!hwlock))
+ continue;
+
+ if (hwlock->bank->dev->of_node == args.np) {
+ ret = 0;
+ break;
+ }
+ }
+ rcu_read_unlock();
+ if (ret < 0)
+ goto out;
+
+ id = of_hwspin_lock_simple_xlate(&args);
+ if (id < 0 || id >= hwlock->bank->num_locks) {
+ ret = -EINVAL;
+ goto out;
+ }
+ id += hwlock->bank->base_id;
+
+out:
+ of_node_put(args.np);
+ return ret ? ret : id;
+}
+EXPORT_SYMBOL_GPL(of_hwspin_lock_get_id);
+
static int hwspin_lock_register_single(struct hwspinlock *hwlock, int id)
{
struct hwspinlock *tmp;
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -26,6 +26,7 @@
#define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */
struct device;
+struct device_node;
struct hwspinlock;
struct hwspinlock_device;
struct hwspinlock_ops;
@@ -66,6 +67,7 @@ int hwspin_lock_unregister(struct hwspin
struct hwspinlock *hwspin_lock_request(void);
struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
int hwspin_lock_free(struct hwspinlock *hwlock);
+int of_hwspin_lock_get_id(struct device_node *np, int index);
int hwspin_lock_get_id(struct hwspinlock *hwlock);
int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int,
unsigned long *);
@@ -120,6 +122,11 @@ void __hwspin_unlock(struct hwspinlock *
{
}
+static inline int of_hwspin_lock_get_id(struct device_node *np, int index)
+{
+ return 0;
+}
+
static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
{
return 0;

234
target/linux/ipq806x/patches-3.18/031-hwspinlock-qcom-Add-support-for-Qualcomm-HW-Mutex-bl.patch
View file

@ -1,234 +0,0 @@
From 19a0f61224d2d91860fa8291ab63cb104ee86bdd Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Date: Tue, 24 Mar 2015 10:11:05 -0700
Subject: [PATCH] hwspinlock: qcom: Add support for Qualcomm HW Mutex block
Add driver for Qualcomm Hardware Mutex block found in many Qualcomm
SoCs.
Based on initial effort by Kumar Gala <galak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
drivers/hwspinlock/Kconfig | 12 +++
drivers/hwspinlock/Makefile | 1 +
drivers/hwspinlock/qcom_hwspinlock.c | 181 +++++++++++++++++++++++++++++++++++
3 files changed, 194 insertions(+)
create mode 100644 drivers/hwspinlock/qcom_hwspinlock.c
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -18,6 +18,18 @@ config HWSPINLOCK_OMAP
If unsure, say N.
+config HWSPINLOCK_QCOM
+ tristate "Qualcomm Hardware Spinlock device"
+ depends on ARCH_QCOM
+ select HWSPINLOCK
+ select MFD_SYSCON
+ help
+ Say y here to support the Qualcomm Hardware Mutex functionality, which
+ provides a synchronisation mechanism for the various processors on
+ the SoC.
+
+ If unsure, say N.
+
config HSEM_U8500
tristate "STE Hardware Semaphore functionality"
depends on ARCH_U8500
--- a/drivers/hwspinlock/Makefile
+++ b/drivers/hwspinlock/Makefile
@@ -4,4 +4,5 @@
obj-$(CONFIG_HWSPINLOCK) += hwspinlock_core.o
obj-$(CONFIG_HWSPINLOCK_OMAP) += omap_hwspinlock.o
+obj-$(CONFIG_HWSPINLOCK_QCOM) += qcom_hwspinlock.o
obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o
--- /dev/null
+++ b/drivers/hwspinlock/qcom_hwspinlock.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, Sony Mobile Communications AB
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwspinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include "hwspinlock_internal.h"
+
+#define QCOM_MUTEX_APPS_PROC_ID 1
+#define QCOM_MUTEX_NUM_LOCKS 32
+
+static int qcom_hwspinlock_trylock(struct hwspinlock *lock)
+{
+ struct regmap_field *field = lock->priv;
+ u32 lock_owner;
+ int ret;
+
+ ret = regmap_field_write(field, QCOM_MUTEX_APPS_PROC_ID);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_read(field, &lock_owner);
+ if (ret)
+ return ret;
+
+ return lock_owner == QCOM_MUTEX_APPS_PROC_ID;
+}
+
+static void qcom_hwspinlock_unlock(struct hwspinlock *lock)
+{
+ struct regmap_field *field = lock->priv;
+ u32 lock_owner;
+ int ret;
+
+ ret = regmap_field_read(field, &lock_owner);
+ if (ret) {
+ pr_err("%s: unable to query spinlock owner\n", __func__);
+ return;
+ }
+
+ if (lock_owner != QCOM_MUTEX_APPS_PROC_ID) {
+ pr_err("%s: spinlock not owned by us (actual owner is %d)\n",
+ __func__, lock_owner);
+ }
+
+ ret = regmap_field_write(field, 0);
+ if (ret)
+ pr_err("%s: failed to unlock spinlock\n", __func__);
+}
+
+static const struct hwspinlock_ops qcom_hwspinlock_ops = {
+ .trylock = qcom_hwspinlock_trylock,
+ .unlock = qcom_hwspinlock_unlock,
+};
+
+static const struct of_device_id qcom_hwspinlock_of_match[] = {
+ { .compatible = "qcom,sfpb-mutex" },
+ { .compatible = "qcom,tcsr-mutex" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_hwspinlock_of_match);
+
+static int qcom_hwspinlock_probe(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank;
+ struct device_node *syscon;
+ struct reg_field field;
+ struct regmap *regmap;
+ size_t array_size;
+ u32 stride;
+ u32 base;
+ int ret;
+ int i;
+
+ syscon = of_parse_phandle(pdev->dev.of_node, "syscon", 0);
+ if (!syscon) {
+ dev_err(&pdev->dev, "no syscon property\n");
+ return -ENODEV;
+ }
+
+ regmap = syscon_node_to_regmap(syscon);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 1, &base);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in syscon\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 2, &stride);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no stride syscon\n");
+ return -EINVAL;
+ }
+
+ array_size = QCOM_MUTEX_NUM_LOCKS * sizeof(struct hwspinlock);
+ bank = devm_kzalloc(&pdev->dev, sizeof(*bank) + array_size, GFP_KERNEL);
+ if (!bank)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, bank);
+
+ for (i = 0; i < QCOM_MUTEX_NUM_LOCKS; i++) {
+ field.reg = base + i * stride;
+ field.lsb = 0;
+ field.msb = 32;
+
+ bank->lock[i].priv = devm_regmap_field_alloc(&pdev->dev,
+ regmap, field);
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
+ ret = hwspin_lock_register(bank, &pdev->dev, &qcom_hwspinlock_ops,
+ 0, QCOM_MUTEX_NUM_LOCKS);
+ if (ret)
+ pm_runtime_disable(&pdev->dev);
+
+ return ret;
+}
+
+static int qcom_hwspinlock_remove(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = hwspin_lock_unregister(bank);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver qcom_hwspinlock_driver = {
+ .probe = qcom_hwspinlock_probe,
+ .remove = qcom_hwspinlock_remove,
+ .driver = {
+ .name = "qcom_hwspinlock",
+ .of_match_table = qcom_hwspinlock_of_match,
+ },
+};
+
+static int __init qcom_hwspinlock_init(void)
+{
+ return platform_driver_register(&qcom_hwspinlock_driver);
+}
+/* board init code might need to reserve hwspinlocks for predefined purposes */
+postcore_initcall(qcom_hwspinlock_init);
+
+static void __exit qcom_hwspinlock_exit(void)
+{
+ platform_driver_unregister(&qcom_hwspinlock_driver);
+}
+module_exit(qcom_hwspinlock_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hardware spinlock driver for Qualcomm SoCs");

26
target/linux/ipq806x/patches-3.18/032-hwspinlock-qcom-Correct-msb-in-regmap_field.patch
View file

@ -1,26 +0,0 @@
From bd5717a4632cdecafe82d03de7dcb3b1876e2828 Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Date: Fri, 26 Jun 2015 14:47:21 -0700
Subject: [PATCH] hwspinlock: qcom: Correct msb in regmap_field
msb of the regmap_field was mistakenly given the value 32, to set all bits
in the regmap update mask; although incorrect this worked until 921cc294,
where the mask calculation was corrected.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
drivers/hwspinlock/qcom_hwspinlock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hwspinlock/qcom_hwspinlock.c
+++ b/drivers/hwspinlock/qcom_hwspinlock.c
@@ -123,7 +123,7 @@ static int qcom_hwspinlock_probe(struct
for (i = 0; i < QCOM_MUTEX_NUM_LOCKS; i++) {
field.reg = base + i * stride;
field.lsb = 0;
- field.msb = 32;
+ field.msb = 31;
bank->lock[i].priv = devm_regmap_field_alloc(&pdev->dev,
regmap, field);

34
target/linux/ipq806x/patches-3.18/033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch
View file

@ -1,34 +0,0 @@
From c7c482da19a5e4ba7101198c21c2434056b0b2da Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Thu, 13 Aug 2015 09:45:26 -0700
Subject: [PATCH 1/3] ARM: qcom: add SFPB nodes to IPQ806x dts
Add one new node to the ipq806x.dtsi file to declare & register the
hardware spinlock devices. This mechanism is required to be used by
other drivers such as SMEM.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -291,5 +291,17 @@
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ sfpb_mutex_block: syscon@1200600 {
+ compatible = "syscon";
+ reg = <0x01200600 0x100>;
+ };
};
+
+ sfpb_mutex: sfpb-mutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_mutex_block 4 4>;
+
+ #hwlock-cells = <1>;
+ };
};

82
target/linux/ipq806x/patches-3.18/034-soc-qcom-Add-device-tree-binding-for-SMEM.patch
View file

@ -1,82 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v2,1/2] soc: qcom: Add device tree binding for SMEM
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
X-Patchwork-Id: 6202201
Message-Id: <1428795178-24312-1-git-send-email-bjorn.andersson@sonymobile.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>, Jeffrey Hugo <jhugo@codeaurora.org>,
Andry Gross <agross@codeaurora.org>
Cc: <devicetree@vger.kernel.org>,
linux-arm-msm <linux-arm-msm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Date: Sat, 11 Apr 2015 16:32:57 -0700
Add device tree binding documentation for the Qualcom Shared Memory
manager.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
Changes since v1:
- None
.../devicetree/bindings/soc/qcom/qcom,smem.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt
@@ -0,0 +1,49 @@
+Qualcomm Shared Memory binding
+
+This binding describes the Qualcomm Shared Memory, used to share data between
+various subsystems and OSes in Qualcomm platforms.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be:
+ "qcom,smem"
+
+- memory-region:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: handle to memory reservation for main smem memory region.
+
+- reg:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: base address and size pair for any additional memory areas
+ of the shared memory.
+
+- hwspinlocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to a hwspinlock used to protect allocations from
+ the shared memory
+
+= EXAMPLE
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_region: smem@fa00000 {
+ reg = <0xfa00000 0x200000>;
+ no-map;
+ };
+ };
+
+ smem@fa00000 {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_region>;
+ reg = <0xfc428000 0x4000>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };

841
target/linux/ipq806x/patches-3.18/035-soc-qcom-Add-Shared-Memory-Manager-driver.patch
View file

@ -1,841 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v2,2/2] soc: qcom: Add Shared Memory Manager driver
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
X-Patchwork-Id: 6202211
Message-Id: <1428795178-24312-2-git-send-email-bjorn.andersson@sonymobile.com>
To: Kumar Gala <galak@codeaurora.org>, Andy Gross <agross@codeaurora.org>,
David Brown <davidb@codeaurora.org>, Jeffrey Hugo <jhugo@codeaurora.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<linux-soc@vger.kernel.org>
Date: Sat, 11 Apr 2015 16:32:58 -0700
The Shared Memory Manager driver implements an interface for allocating
and accessing items in the memory area shared among all of the
processors in a Qualcomm platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Tested-by: Andy Gross <agross@codeaurora.org>
---
Changes since v1:
- ioremapping the regions nocache
- improved documentation of the two regions of partitions
- corrected free space check in private allocator
drivers/soc/qcom/Kconfig | 7 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/smem.c | 768 ++++++++++++++++++++++++++++++++++++++++++
include/linux/soc/qcom/smem.h | 14 +
4 files changed, 790 insertions(+)
create mode 100644 drivers/soc/qcom/smem.c
create mode 100644 include/linux/soc/qcom/smem.h
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -9,3 +9,10 @@ config QCOM_GSBI
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
+config QCOM_SMEM
+ tristate "Qualcomm Shared Memory Manager (SMEM)"
+ depends on ARCH_QCOM
+ help
+ Say y here to enable support for the Qualcomm Shared Memory Manager.
+ The driver provides an interface to items in a heap shared among all
+ processors in a Qualcomm platform.
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_SMEM) += smem.o
--- /dev/null
+++ b/drivers/soc/qcom/smem.c
@@ -0,0 +1,768 @@
+/*
+ * Copyright (c) 2015, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwspinlock.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+
+/*
+ * The Qualcomm shared memory system is a allocate only heap structure that
+ * consists of one of more memory areas that can be accessed by the processors
+ * in the SoC.
+ *
+ * All systems contains a global heap, accessible by all processors in the SoC,
+ * with a table of contents data structure (@smem_header) at the beginning of
+ * the main shared memory block.
+ *
+ * The global header contains metadata for allocations as well as a fixed list
+ * of 512 entries (@smem_global_entry) that can be initialized to reference
+ * parts of the shared memory space.
+ *
+ *
+ * In addition to this global heap a set of "private" heaps can be set up at
+ * boot time with access restrictions so that only certain processor pairs can
+ * access the data.
+ *
+ * These partitions are referenced from an optional partition table
+ * (@smem_ptable), that is found 4kB from the end of the main smem region. The
+ * partition table entries (@smem_ptable_entry) lists the involved processors
+ * (or hosts) and their location in the main shared memory region.
+ *
+ * Each partition starts with a header (@smem_partition_header) that identifies
+ * the partition and holds properties for the two internal memory regions. The
+ * two regions are cached and non-cached memory respectively. Each region
+ * contain a link list of allocation headers (@smem_private_entry) followed by
+ * their data.
+ *
+ * Items in the non-cached region are allocated from the start of the partition
+ * while items in the cached region are allocated from the end. The free area
+ * is hence the region between the cached and non-cached offsets.
+ *
+ *
+ * To synchronize allocations in the shared memory heaps a remote spinlock must
+ * be held - currently lock number 3 of the sfpb or tcsr is used for this on all
+ * platforms.
+ *
+ */
+
+/**
+ * struct smem_proc_comm - proc_comm communication struct (legacy)
+ * @command: current command to be executed
+ * @status: status of the currently requested command
+ * @params: parameters to the command
+ */
+struct smem_proc_comm {
+ u32 command;
+ u32 status;
+ u32 params[2];
+};
+
+/**
+ * struct smem_global_entry - entry to reference smem items on the heap
+ * @allocated: boolean to indicate if this entry is used
+ * @offset: offset to the allocated space
+ * @size: size of the allocated space, 8 byte aligned
+ * @aux_base: base address for the memory region used by this unit, or 0 for
+ * the default region. bits 0,1 are reserved
+ */
+struct smem_global_entry {
+ u32 allocated;
+ u32 offset;
+ u32 size;
+ u32 aux_base; /* bits 1:0 reserved */
+};
+#define AUX_BASE_MASK 0xfffffffc
+
+/**
+ * struct smem_header - header found in beginning of primary smem region
+ * @proc_comm: proc_comm communication interface (legacy)
+ * @version: array of versions for the various subsystems
+ * @initialized: boolean to indicate that smem is initialized
+ * @free_offset: index of the first unallocated byte in smem
+ * @available: number of bytes available for allocation
+ * @reserved: reserved field, must be 0
+ * toc: array of references to items
+ */
+struct smem_header {
+ struct smem_proc_comm proc_comm[4];
+ u32 version[32];
+ u32 initialized;
+ u32 free_offset;
+ u32 available;
+ u32 reserved;
+ struct smem_global_entry toc[];
+};
+
+/**
+ * struct smem_ptable_entry - one entry in the @smem_ptable list
+ * @offset: offset, within the main shared memory region, of the partition
+ * @size: size of the partition
+ * @flags: flags for the partition (currently unused)
+ * @host0: first processor/host with access to this partition
+ * @host1: second processor/host with access to this partition
+ * @reserved: reserved entries for later use
+ */
+struct smem_ptable_entry {
+ u32 offset;
+ u32 size;
+ u32 flags;
+ u16 host0;
+ u16 host1;
+ u32 reserved[8];
+};
+
+/**
+ * struct smem_ptable - partition table for the private partitions
+ * @magic: magic number, must be SMEM_PTABLE_MAGIC
+ * @version: version of the partition table
+ * @num_entries: number of partitions in the table
+ * @reserved: for now reserved entries
+ * @entry: list of @smem_ptable_entry for the @num_entries partitions
+ */
+struct smem_ptable {
+ u32 magic;
+ u32 version;
+ u32 num_entries;
+ u32 reserved[5];
+ struct smem_ptable_entry entry[];
+};
+#define SMEM_PTABLE_MAGIC 0x434f5424 /* "$TOC" */
+
+/**
+ * struct smem_partition_header - header of the partitions
+ * @magic: magic number, must be SMEM_PART_MAGIC
+ * @host0: first processor/host with access to this partition
+ * @host1: second processor/host with access to this partition
+ * @size: size of the partition
+ * @offset_free_uncached: offset to the first free byte of uncached memory in
+ * this partition
+ * @offset_free_cached: offset to the first free byte of cached memory in this
+ * partition
+ * @reserved: for now reserved entries
+ */
+struct smem_partition_header {
+ u32 magic;
+ u16 host0;
+ u16 host1;
+ u32 size;
+ u32 offset_free_uncached;
+ u32 offset_free_cached;
+ u32 reserved[3];
+};
+#define SMEM_PART_MAGIC 0x54525024 /* "$PRT" */
+
+/**
+ * struct smem_private_entry - header of each item in the private partition
+ * @canary: magic number, must be SMEM_PRIVATE_CANARY
+ * @item: identifying number of the smem item
+ * @size: size of the data, including padding bytes
+ * @padding_data: number of bytes of padding of data
+ * @padding_hdr: number of bytes of padding between the header and the data
+ * @reserved: for now reserved entry
+ */
+struct smem_private_entry {
+ u16 canary;
+ u16 item;
+ u32 size; /* includes padding bytes */
+ u16 padding_data;
+ u16 padding_hdr;
+ u32 reserved;
+};
+#define SMEM_PRIVATE_CANARY 0xa5a5
+
+/*
+ * Item 3 of the global heap contains an array of versions for the various
+ * software components in the SoC. We verify that the boot loader version is
+ * what the expected version (SMEM_EXPECTED_VERSION) as a sanity check.
+ */
+#define SMEM_ITEM_VERSION 3
+#define SMEM_MASTER_SBL_VERSION_INDEX 7
+#define SMEM_EXPECTED_VERSION 11
+
+/*
+ * The first 8 items are only to be allocated by the boot loader while
+ * initializing the heap.
+ */
+#define SMEM_ITEM_LAST_FIXED 8
+
+/* Highest accepted item number, for both global and private heaps */
+#define SMEM_ITEM_LAST 512
+
+/* Processor/host identifier for the application processor */
+#define SMEM_HOST_APPS 0
+
+/* Max number of processors/hosts in a system */
+#define SMEM_HOST_COUNT 7
+
+/**
+ * struct smem_region - representation of a chunk of memory used for smem
+ * @aux_base: identifier of aux_mem base
+ * @virt_base: virtual base address of memory with this aux_mem identifier
+ * @size: size of the memory region
+ */
+struct smem_region {
+ u32 aux_base;
+ void __iomem *virt_base;
+ size_t size;
+};
+
+/**
+ * struct qcom_smem - device data for the smem device
+ * @dev: device pointer
+ * @hwlock: reference to a hwspinlock
+ * @partitions: list of pointers to partitions affecting the current
+ * processor/host
+ * @num_regions: number of @regions
+ * @regions: list of the memory regions defining the shared memory
+ */
+struct qcom_smem {
+ struct device *dev;
+
+ struct hwspinlock *hwlock;
+
+ struct smem_partition_header *partitions[SMEM_HOST_COUNT];
+
+ unsigned num_regions;
+ struct smem_region regions[0];
+};
+
+/* Pointer to the one and only smem handle */
+static struct qcom_smem *__smem;
+
+/* Timeout (ms) for the trylock of remote spinlocks */
+#define HWSPINLOCK_TIMEOUT 1000
+
+static int qcom_smem_alloc_private(struct qcom_smem *smem,
+ unsigned host,
+ unsigned item,
+ size_t size)
+{
+ struct smem_partition_header *phdr;
+ struct smem_private_entry *hdr;
+ size_t alloc_size;
+ void *p;
+
+ /* We're not going to find it if there's no matching partition */
+ if (host >= SMEM_HOST_COUNT || !smem->partitions[host])
+ return -ENOENT;
+
+ phdr = smem->partitions[host];
+
+ p = (void *)phdr + sizeof(*phdr);
+ while (p < (void *)phdr + phdr->offset_free_uncached) {
+ hdr = p;
+
+ if (hdr->canary != SMEM_PRIVATE_CANARY) {
+ dev_err(smem->dev,
+ "Found invalid canary in host %d partition\n",
+ host);
+ return -EINVAL;
+ }
+
+ if (hdr->item == item)
+ return -EEXIST;
+
+ p += sizeof(*hdr) + hdr->padding_hdr + hdr->size;
+ }
+
+ /* Check that we don't grow into the cached region */
+ alloc_size = sizeof(*hdr) + ALIGN(size, 8);
+ if (p + alloc_size >= (void *)phdr + phdr->offset_free_cached) {
+ dev_err(smem->dev, "Out of memory\n");
+ return -ENOSPC;
+ }
+
+ hdr = p;
+ hdr->canary = SMEM_PRIVATE_CANARY;
+ hdr->item = item;
+ hdr->size = ALIGN(size, 8);
+ hdr->padding_data = hdr->size - size;
+ hdr->padding_hdr = 0;
+
+ /*
+ * Ensure the header is written before we advance the free offset, so
+ * that remote processors that does not take the remote spinlock still
+ * gets a consistent view of the linked list.
+ */
+ wmb();
+ phdr->offset_free_uncached += alloc_size;
+
+ return 0;
+}
+
+static int qcom_smem_alloc_global(struct qcom_smem *smem,
+ unsigned item,
+ size_t size)
+{
+ struct smem_header *header;
+ struct smem_global_entry *entry;
+
+ if (WARN_ON(item >= SMEM_ITEM_LAST))
+ return -EINVAL;
+
+ header = smem->regions[0].virt_base;
+ entry = &header->toc[item];
+ if (entry->allocated)
+ return -EEXIST;
+
+ size = ALIGN(size, 8);
+ if (WARN_ON(size > header->available))
+ return -ENOMEM;
+
+ entry->offset = header->free_offset;
+ entry->size = size;
+
+ /*
+ * Ensure the header is consistent before we mark the item allocated,
+ * so that remote processors will get a consistent view of the item
+ * even though they do not take the spinlock on read.
+ */
+ wmb();
+ entry->allocated = 1;
+
+ header->free_offset += size;
+ header->available -= size;
+
+ return 0;
+}
+
+/**
+ * qcom_smem_alloc - allocate space for a smem item
+ * @host: remote processor id, or -1
+ * @item: smem item handle
+ * @size: number of bytes to be allocated
+ *
+ * Allocate space for a given smem item of size @size, given that the item is
+ * not yet allocated.
+ */
+int qcom_smem_alloc(unsigned host, unsigned item, size_t size)
+{
+ unsigned long flags;
+ int ret;
+
+ if (!__smem)
+ return -EPROBE_DEFER;
+
+ if (item < SMEM_ITEM_LAST_FIXED) {
+ dev_err(__smem->dev,
+ "Rejecting allocation of static entry %d\n", item);
+ return -EINVAL;
+ }
+
+ ret = hwspin_lock_timeout_irqsave(__smem->hwlock,
+ HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret)
+ return ret;
+
+ ret = qcom_smem_alloc_private(__smem, host, item, size);
+ if (ret == -ENOENT)
+ ret = qcom_smem_alloc_global(__smem, item, size);
+
+ hwspin_unlock_irqrestore(__smem->hwlock, &flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_smem_alloc);
+
+static int qcom_smem_get_global(struct qcom_smem *smem,
+ unsigned item,
+ void **ptr,
+ size_t *size)
+{
+ struct smem_header *header;
+ struct smem_region *area;
+ struct smem_global_entry *entry;
+ u32 aux_base;
+ unsigned i;
+
+ if (WARN_ON(item >= SMEM_ITEM_LAST))
+ return -EINVAL;
+
+ header = smem->regions[0].virt_base;
+ entry = &header->toc[item];
+ if (!entry->allocated)
+ return -ENXIO;
+
+ if (ptr != NULL) {
+ aux_base = entry->aux_base & AUX_BASE_MASK;
+
+ for (i = 0; i < smem->num_regions; i++) {
+ area = &smem->regions[i];
+
+ if (area->aux_base == aux_base || !aux_base) {
+ *ptr = area->virt_base + entry->offset;
+ break;
+ }
+ }
+ }
+ if (size != NULL)
+ *size = entry->size;
+
+ return 0;
+}
+
+static int qcom_smem_get_private(struct qcom_smem *smem,
+ unsigned host,
+ unsigned item,
+ void **ptr,
+ size_t *size)
+{
+ struct smem_partition_header *phdr;
+ struct smem_private_entry *hdr;
+ void *p;
+
+ /* We're not going to find it if there's no matching partition */
+ if (host >= SMEM_HOST_COUNT || !smem->partitions[host])
+ return -ENOENT;
+
+ phdr = smem->partitions[host];
+
+ p = (void *)phdr + sizeof(*phdr);
+ while (p < (void *)phdr + phdr->offset_free_uncached) {
+ hdr = p;
+
+ if (hdr->canary != SMEM_PRIVATE_CANARY) {
+ dev_err(smem->dev,
+ "Found invalid canary in host %d partition\n",
+ host);
+ return -EINVAL;
+ }
+
+ if (hdr->item == item) {
+ if (ptr != NULL)
+ *ptr = p + sizeof(*hdr) + hdr->padding_hdr;
+
+ if (size != NULL)
+ *size = hdr->size - hdr->padding_data;
+
+ return 0;
+ }
+
+ p += sizeof(*hdr) + hdr->padding_hdr + hdr->size;
+ }
+
+ return -ENOENT;
+}
+
+/**
+ * qcom_smem_get - resolve ptr of size of a smem item
+ * @host: the remote processor, or -1
+ * @item: smem item handle
+ * @ptr: pointer to be filled out with address of the item
+ * @size: pointer to be filled out with size of the item
+ *
+ * Looks up pointer and size of a smem item.
+ */
+int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size)
+{
+ unsigned long flags;
+ int ret;
+
+ if (!__smem)
+ return -EPROBE_DEFER;
+
+ ret = hwspin_lock_timeout_irqsave(__smem->hwlock,
+ HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret)
+ return ret;
+
+ ret = qcom_smem_get_private(__smem, host, item, ptr, size);
+ if (ret == -ENOENT)
+ ret = qcom_smem_get_global(__smem, item, ptr, size);
+
+ hwspin_unlock_irqrestore(__smem->hwlock, &flags);
+ return ret;
+
+}
+EXPORT_SYMBOL(qcom_smem_get);
+
+/**
+ * qcom_smem_get_free_space - retrieve amont of free space in a partition
+ * @host: the remote processor identifing a partition, or -1
+ *
+ * To be used by smem clients as a quick way to determine if any new
+ * allocations has been made.
+ */
+int qcom_smem_get_free_space(unsigned host)
+{
+ struct smem_partition_header *phdr;
+ struct smem_header *header;
+ unsigned ret;
+
+ if (!__smem)
+ return -EPROBE_DEFER;
+
+ if (host < SMEM_HOST_COUNT && __smem->partitions[host]) {
+ phdr = __smem->partitions[host];
+ ret = phdr->offset_free_uncached;
+ } else {
+ header = __smem->regions[0].virt_base;
+ ret = header->available;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_smem_get_free_space);
+
+static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
+{
+ unsigned *versions;
+ size_t size;
+ int ret;
+
+ ret = qcom_smem_get_global(smem, SMEM_ITEM_VERSION,
+ (void **)&versions, &size);
+ if (ret < 0) {
+ dev_err(smem->dev, "Unable to read the version item\n");
+ return -ENOENT;
+ }
+
+ if (size < sizeof(unsigned) * SMEM_MASTER_SBL_VERSION_INDEX) {
+ dev_err(smem->dev, "Version item is too small\n");
+ return -EINVAL;
+ }
+
+ return versions[SMEM_MASTER_SBL_VERSION_INDEX];
+}
+
+static int qcom_smem_enumerate_partitions(struct qcom_smem *smem,
+ unsigned local_host)
+{
+ struct smem_partition_header *header;
+ struct smem_ptable_entry *entry;
+ struct smem_ptable *ptable;
+ unsigned remote_host;
+ int i;
+
+ ptable = smem->regions[0].virt_base + smem->regions[0].size - 4 * 1024;
+ if (ptable->magic != SMEM_PTABLE_MAGIC)
+ return 0;
+
+ if (ptable->version != 1) {
+ dev_err(smem->dev,
+ "Unsupported partition header version %d\n",
+ ptable->version);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ptable->num_entries; i++) {
+ entry = &ptable->entry[i];
+
+ if (entry->host0 != local_host && entry->host1 != local_host)
+ continue;
+
+ if (!entry->offset)
+ continue;
+
+ if (!entry->size)
+ continue;
+
+ if (entry->host0 == local_host)
+ remote_host = entry->host1;
+ else
+ remote_host = entry->host0;
+
+ if (smem->partitions[remote_host]) {
+ dev_err(smem->dev,
+ "Already found a partition for host %d\n",
+ remote_host);
+ return -EINVAL;
+ }
+
+ header = smem->regions[0].virt_base + entry->offset;
+
+ if (header->magic != SMEM_PART_MAGIC) {
+ dev_err(smem->dev,
+ "Partition %d has invalid magic\n", i);
+ return -EINVAL;
+ }
+
+ if (header->host0 != local_host && header->host1 != local_host) {
+ dev_err(smem->dev,
+ "Partition %d hosts are invalid\n", i);
+ return -EINVAL;
+ }
+
+ if (header->host0 != remote_host && header->host1 != remote_host) {
+ dev_err(smem->dev,
+ "Partition %d hosts are invalid\n", i);
+ return -EINVAL;
+ }
+
+ if (header->size != entry->size) {
+ dev_err(smem->dev,
+ "Partition %d has invalid size\n", i);
+ return -EINVAL;
+ }
+
+ if (header->offset_free_uncached > header->size) {
+ dev_err(smem->dev,
+ "Partition %d has invalid free pointer\n", i);
+ return -EINVAL;
+ }
+
+ smem->partitions[remote_host] = header;
+ }
+
+ return 0;
+}
+
+static int qcom_smem_count_mem_regions(struct platform_device *pdev)
+{
+ struct resource *res;
+ int num_regions = 0;
+ int i;
+
+ for (i = 0; i < pdev->num_resources; i++) {
+ res = &pdev->resource[i];
+
+ if (resource_type(res) == IORESOURCE_MEM)
+ num_regions++;
+ }
+
+ return num_regions;
+}
+
+static int qcom_smem_probe(struct platform_device *pdev)
+{
+ struct smem_header *header;
+ struct device_node *np;
+ struct qcom_smem *smem;
+ struct resource *res;
+ struct resource r;
+ size_t array_size;
+ int num_regions = 0;
+ int hwlock_id;
+ u32 version;
+ int ret;
+ int i;
+
+ num_regions = qcom_smem_count_mem_regions(pdev) + 1;
+
+ array_size = num_regions * sizeof(struct smem_region);
+ smem = devm_kzalloc(&pdev->dev, sizeof(*smem) + array_size, GFP_KERNEL);
+ if (!smem)
+ return -ENOMEM;
+
+ smem->dev = &pdev->dev;
+ smem->num_regions = num_regions;
+
+ np = of_parse_phandle(pdev->dev.of_node, "memory-region", 0);
+ if (!np) {
+ dev_err(&pdev->dev, "No memory-region specified\n");
+ return -EINVAL;
+ }
+
+ ret = of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+ if (ret)
+ return ret;
+
+ smem->regions[0].aux_base = (u32)r.start;
+ smem->regions[0].size = resource_size(&r);
+ smem->regions[0].virt_base = devm_ioremap_nocache(&pdev->dev,
+ r.start,
+ resource_size(&r));
+ if (!smem->regions[0].virt_base)
+ return -ENOMEM;
+
+ for (i = 1; i < num_regions; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i - 1);
+
+ smem->regions[i].aux_base = (u32)res->start;
+ smem->regions[i].size = resource_size(res);
+ smem->regions[i].virt_base = devm_ioremap_nocache(&pdev->dev,
+ res->start,
+ resource_size(res));
+ if (!smem->regions[i].virt_base)
+ return -ENOMEM;
+ }
+
+ header = smem->regions[0].virt_base;
+ if (header->initialized != 1 || header->reserved) {
+ dev_err(&pdev->dev, "SMEM is not initilized by SBL\n");
+ return -EINVAL;
+ }
+
+ version = qcom_smem_get_sbl_version(smem);
+ if (version >> 16 != SMEM_EXPECTED_VERSION) {
+ dev_err(&pdev->dev, "Unsupported smem version 0x%x\n", version);
+ return -EINVAL;
+ }
+
+ ret = qcom_smem_enumerate_partitions(smem, SMEM_HOST_APPS);
+ if (ret < 0)
+ return ret;
+
+ hwlock_id = of_hwspin_lock_get_id(pdev->dev.of_node, 0);
+ if (hwlock_id < 0) {
+ dev_err(&pdev->dev, "failed to retrieve hwlock\n");
+ return hwlock_id;
+ }
+
+ smem->hwlock = hwspin_lock_request_specific(hwlock_id);
+ if (!smem->hwlock)
+ return -ENXIO;
+
+ __smem = smem;
+
+ return 0;
+}
+
+static int qcom_smem_remove(struct platform_device *pdev)
+{
+ hwspin_lock_free(__smem->hwlock);
+ __smem = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id qcom_smem_of_match[] = {
+ { .compatible = "qcom,smem" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qcom_smem_of_match);
+
+static struct platform_driver qcom_smem_driver = {
+ .probe = qcom_smem_probe,
+ .remove = qcom_smem_remove,
+ .driver = {
+ .name = "qcom_smem",
+ .of_match_table = qcom_smem_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+
+static int __init qcom_smem_init(void)
+{
+ return platform_driver_register(&qcom_smem_driver);
+}
+arch_initcall(qcom_smem_init);
+
+static void __exit qcom_smem_exit(void)
+{
+ platform_driver_unregister(&qcom_smem_driver);
+}
+module_exit(qcom_smem_exit)
+
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
+MODULE_DESCRIPTION("Qualcomm Shared Memory Manager");
+MODULE_LICENSE("GPLv2");
--- /dev/null
+++ b/include/linux/soc/qcom/smem.h
@@ -0,0 +1,14 @@
+#ifndef __QCOM_SMEM_H__
+#define __QCOM_SMEM_H__
+
+struct device_node;
+struct qcom_smem;
+
+#define QCOM_SMEM_HOST_ANY -1
+
+int qcom_smem_alloc(unsigned host, unsigned item, size_t size);
+int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size);
+
+int qcom_smem_get_free_space(unsigned host);
+
+#endif

36
target/linux/ipq806x/patches-3.18/036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch
View file

@ -1,36 +0,0 @@
From f212be3a6134db8dd7c5f6f0987536a669401fae Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 14 Aug 2015 11:17:20 -0700
Subject: [PATCH 2/3] ARM: qcom: add SMEM device node to IPQ806x dts
SMEM is used on IPQ806x to store various board related information such
as boot device and flash partition layout. We'll declare it as a device
so we can make use of it thanks to the new SMEM soc driver.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -54,7 +54,7 @@
no-map;
};
- smem@41000000 {
+ smem: smem@41000000 {
reg = <0x41000000 0x200000>;
no-map;
};
@@ -304,4 +304,10 @@
#hwlock-cells = <1>;
};
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem>;
+ hwlocks = <&sfpb_mutex 3>;
+ };
};

277
target/linux/ipq806x/patches-3.18/037-mtd-add-SMEM-parser-for-QCOM-platforms.patch
View file

@ -1,277 +0,0 @@
From 0501f76b138cf1dc11a313bb7a094da524b79337 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Thu, 13 Aug 2015 09:53:14 -0700
Subject: [PATCH 3/3] mtd: add SMEM parser for QCOM platforms
On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is
used to store partition layout. This new parser can now be used to read
SMEM and use it to register an MTD layout according to its content.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/mtd/Kconfig | 7 ++
drivers/mtd/Makefile | 1 +
drivers/mtd/qcom_smem_part.c | 231 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 239 insertions(+)
create mode 100644 drivers/mtd/qcom_smem_part.c
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -200,6 +200,13 @@ config MTD_MYLOADER_PARTS
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically.
+config MTD_QCOM_SMEM_PARTS
+ tristate "QCOM SMEM partitioning support"
+ depends on QCOM_SMEM
+ help
+ This provides partitions parser for QCOM devices using SMEM
+ such as IPQ806x.
+
comment "User Modules And Translation Layers"
#
--- /dev/null
+++ b/drivers/mtd/qcom_smem_part.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include <linux/soc/qcom/smem.h>
+
+/* Processor/host identifier for the application processor */
+#define SMEM_HOST_APPS 0
+
+/* SMEM items index */
+#define SMEM_AARM_PARTITION_TABLE 9
+#define SMEM_BOOT_FLASH_TYPE 421
+#define SMEM_BOOT_FLASH_BLOCK_SIZE 424
+
+/* SMEM Flash types */
+#define SMEM_FLASH_NAND 2
+#define SMEM_FLASH_SPI 6
+
+#define SMEM_PART_NAME_SZ 16
+#define SMEM_PARTS_MAX 32
+
+struct smem_partition {
+ char name[SMEM_PART_NAME_SZ];
+ __le32 start;
+ __le32 size;
+ __le32 attr;
+};
+
+struct smem_partition_table {
+ u8 magic[8];
+ __le32 version;
+ __le32 len;
+ struct smem_partition parts[SMEM_PARTS_MAX];
+};
+
+/* SMEM Magic values in partition table */
+static const u8 SMEM_PTABLE_MAGIC[] = {
+ 0xaa, 0x73, 0xee, 0x55,
+ 0xdb, 0xbd, 0x5e, 0xe3,
+};
+
+static int qcom_smem_get_flash_blksz(u64 **smem_blksz)
+{
+ int ret;
+ size_t size;
+
+ ret = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE,
+ (void **) smem_blksz, &size);
+
+ if (ret < 0) {
+ pr_err("Unable to read flash blksz from SMEM\n");
+ return -ENOENT;
+ }
+
+ if (size != sizeof(**smem_blksz)) {
+ pr_err("Invalid flash blksz size in SMEM\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qcom_smem_get_flash_type(u64 **smem_flash_type)
+{
+ int ret;
+ size_t size;
+
+ ret = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE,
+ (void **) smem_flash_type, &size);
+
+ if (ret < 0) {
+ pr_err("Unable to read flash type from SMEM\n");
+ return -ENOENT;
+ }
+
+ if (size != sizeof(**smem_flash_type)) {
+ pr_err("Invalid flash type size in SMEM\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts)
+{
+ int ret;
+ size_t size;
+
+ ret = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE,
+ (void **) pparts, &size);
+
+ if (ret < 0) {
+ pr_err("Unable to read partition table from SMEM\n");
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}
+
+static bool is_spi_device(struct device_node *np)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match);
+ if (!dev)
+ return false;
+
+ put_device(dev);
+ return true;
+}
+
+static int parse_qcom_smem_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct smem_partition_table *smem_parts;
+ u64 *smem_flash_type, *smem_blksz;
+ struct mtd_partition *mtd_parts;
+ struct device_node *of_node = data->of_node;
+ int i, ret;
+
+ /*
+ * SMEM will only store the partition table of the boot device.
+ * If this is not the boot device, do not return any partition.
+ */
+ ret = qcom_smem_get_flash_type(&smem_flash_type);
+ if (ret < 0)
+ return ret;
+
+ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master))
+ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node)))
+ return 0;
+
+ /*
+ * Just for sanity purpose, make sure the block size in SMEM matches the
+ * block size of the MTD device
+ */
+ ret = qcom_smem_get_flash_blksz(&smem_blksz);
+ if (ret < 0)
+ return ret;
+
+ if (*smem_blksz != master->erasesize) {
+ pr_err("SMEM block size differs from MTD block size\n");
+ return -EINVAL;
+ }
+
+ /* Get partition pointer from SMEM */
+ ret = qcom_smem_get_flash_partitions(&smem_parts);
+ if (ret < 0)
+ return ret;
+
+ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic,
+ sizeof(SMEM_PTABLE_MAGIC))) {
+ pr_err("SMEM partition magic invalid\n");
+ return -EINVAL;
+ }
+
+ /* Allocate and populate the mtd structures */
+ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts),
+ GFP_KERNEL);
+ if (!mtd_parts)
+ return -ENOMEM;
+
+ for (i = 0; i < smem_parts->len; i++) {
+ struct smem_partition *s_part = &smem_parts->parts[i];
+ struct mtd_partition *m_part = &mtd_parts[i];
+
+ m_part->name = s_part->name;
+ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
+ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
+
+ /*
+ * The last SMEM partition may have its size marked as
+ * something like 0xffffffff, which means "until the end of the
+ * flash device". In this case, truncate it.
+ */
+ if (m_part->offset + m_part->size > master->size)
+ m_part->size = master->size - m_part->offset;
+ }
+
+ *pparts = mtd_parts;
+
+ return smem_parts->len;
+}
+
+static struct mtd_part_parser qcom_smem_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_qcom_smem_partitions,
+ .name = "qcom-smem",
+};
+
+static int __init qcom_smem_parser_init(void)
+{
+ register_mtd_parser(&qcom_smem_parser);
+ return 0;
+}
+
+static void __exit qcom_smem_parser_exit(void)
+{
+ deregister_mtd_parser(&qcom_smem_parser);
+}
+
+module_init(qcom_smem_parser_init);
+module_exit(qcom_smem_parser_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Parsing code for SMEM based partition tables");
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o

249
target/linux/ipq806x/patches-3.18/102-soc-qcom-gsbi-Add-support-for-ADM-CRCI-muxing.patch
View file

@ -1,249 +0,0 @@
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
@@ -6,7 +6,8 @@ configuration settings. The mode settin
the 4 GSBI IOs.
Required properties:
-- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
+- compatible: Should contain "qcom,gsbi-v1.0.0"
+- cell-index: Should contain the GSBI index
- reg: Address range for GSBI registers
- clocks: required clock
- clock-names: must contain "iface" entry
@@ -16,6 +17,8 @@ Required properties:
Optional properties:
- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference
dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses
+ dma.
Required properties if child node exists:
- #address-cells: Must be 1
@@ -39,6 +42,7 @@ Example for APQ8064:
gsbi4@16300000 {
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <4>;
reg = <0x16300000 0x100>;
clocks = <&gcc GSBI4_H_CLK>;
clock-names = "iface";
@@ -48,6 +52,8 @@ Example for APQ8064:
qcom,mode = <GSBI_PROT_I2C_UART>;
qcom,crci = <GSBI_CRCI_QUP>;
+ syscon-tcsr = <&tcsr>;
+
/* child nodes go under here */
i2c_qup4: i2c@16380000 {
@@ -76,3 +82,9 @@ Example for APQ8064:
};
};
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,apq8064-tcsr", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
+
+
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -4,6 +4,7 @@
config QCOM_GSBI
tristate "QCOM General Serial Bus Interface"
depends on ARCH_QCOM
+ select MFD_SYSCON
help
Say y here to enable GSBI support. The GSBI provides control
functions for connecting the underlying serial UART, SPI, and I2C
--- a/drivers/soc/qcom/qcom_gsbi.c
+++ b/drivers/soc/qcom/qcom_gsbi.c
@@ -18,22 +18,129 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
#define GSBI_CTRL_REG 0x0000
#define GSBI_PROTOCOL_SHIFT 4
+#define MAX_GSBI 12
+
+#define TCSR_ADM_CRCI_BASE 0x70
+
+struct crci_config {
+ u32 num_rows;
+ const u32 (*array)[MAX_GSBI];
+};
+
+static const u32 crci_ipq8064[][MAX_GSBI] = {
+ {
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+ {
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+};
+
+static const struct crci_config config_ipq8064 = {
+ .num_rows = ARRAY_SIZE(crci_ipq8064),
+ .array = crci_ipq8064,
+};
+
+static const unsigned int crci_apq8064[][MAX_GSBI] = {
+ {
+ 0x001800, 0x006000, 0x000030, 0x0000c0,
+ 0x000300, 0x000400, 0x000000, 0x000000,
+ 0x000000, 0x000000, 0x000000, 0x000000
+ },
+ {
+ 0x000000, 0x000000, 0x000000, 0x000000,
+ 0x000000, 0x000020, 0x0000c0, 0x000000,
+ 0x000000, 0x000000, 0x000000, 0x000000
+ },
+};
+
+static const struct crci_config config_apq8064 = {
+ .num_rows = ARRAY_SIZE(crci_apq8064),
+ .array = crci_apq8064,
+};
+
+static const unsigned int crci_msm8960[][MAX_GSBI] = {
+ {
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000400, 0x000000, 0x000000,
+ 0x000000, 0x000000, 0x000000, 0x000000
+ },
+ {
+ 0x000000, 0x000000, 0x000000, 0x000000,
+ 0x000000, 0x000020, 0x0000c0, 0x000300,
+ 0x001800, 0x006000, 0x000000, 0x000000
+ },
+};
+
+static const struct crci_config config_msm8960 = {
+ .num_rows = ARRAY_SIZE(crci_msm8960),
+ .array = crci_msm8960,
+};
+
+static const unsigned int crci_msm8660[][MAX_GSBI] = {
+ { /* ADM 0 - B */
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+ { /* ADM 0 - B */
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+ { /* ADM 1 - A */
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+ { /* ADM 1 - B */
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+};
+
+static const struct crci_config config_msm8660 = {
+ .num_rows = ARRAY_SIZE(crci_msm8660),
+ .array = crci_msm8660,
+};
struct gsbi_info {
struct clk *hclk;
u32 mode;
u32 crci;
+ struct regmap *tcsr;
+};
+
+static const struct of_device_id tcsr_dt_match[] = {
+ { .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064},
+ { .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064},
+ { .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960},
+ { .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660},
+ { },
};
static int gsbi_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
+ struct device_node *tcsr_node;
+ const struct of_device_id *match;
struct resource *res;
void __iomem *base;
struct gsbi_info *gsbi;
+ int i;
+ u32 mask, gsbi_num;
+ const struct crci_config *config = NULL;
gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL);
@@ -45,6 +152,32 @@ static int gsbi_probe(struct platform_de
if (IS_ERR(base))
return PTR_ERR(base);
+ /* get the tcsr node and setup the config and regmap */
+ gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr");
+
+ if (!IS_ERR(gsbi->tcsr)) {
+ tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0);
+ if (tcsr_node) {
+ match = of_match_node(tcsr_dt_match, tcsr_node);
+ if (match)
+ config = match->data;
+ else
+ dev_warn(&pdev->dev, "no matching TCSR\n");
+
+ of_node_put(tcsr_node);
+ }
+ }
+
+ if (of_property_read_u32(node, "cell-index", &gsbi_num)) {
+ dev_err(&pdev->dev, "missing cell-index\n");
+ return -EINVAL;
+ }
+
+ if (gsbi_num < 1 || gsbi_num > MAX_GSBI) {
+ dev_err(&pdev->dev, "invalid cell-index\n");
+ return -EINVAL;
+ }
+
if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) {
dev_err(&pdev->dev, "missing mode configuration\n");
return -EINVAL;
@@ -64,6 +197,25 @@ static int gsbi_probe(struct platform_de
writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci,
base + GSBI_CTRL_REG);
+ /*
+ * modify tcsr to reflect mode and ADM CRCI mux
+ * Each gsbi contains a pair of bits, one for RX and one for TX
+ * SPI mode requires both bits cleared, otherwise they are set
+ */
+ if (config) {
+ for (i = 0; i < config->num_rows; i++) {
+ mask = config->array[i][gsbi_num - 1];
+
+ if (gsbi->mode == GSBI_PROT_SPI)
+ regmap_update_bits(gsbi->tcsr,
+ TCSR_ADM_CRCI_BASE + 4 * i, mask, 0);
+ else
+ regmap_update_bits(gsbi->tcsr,
+ TCSR_ADM_CRCI_BASE + 4 * i, mask, mask);
+
+ }
+ }
+
/* make sure the gsbi control write is not reordered */
wmb();

65
target/linux/ipq806x/patches-3.18/103-ARM-DT-ipq8064-Add-TCSR-support.patch
View file

@ -1,65 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -132,6 +132,7 @@
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <2>;
reg = <0x12480000 0x100>;
clocks = <&gcc GSBI2_H_CLK>;
clock-names = "iface";
@@ -140,6 +141,8 @@
ranges;
status = "disabled";
+ syscon-tcsr = <&tcsr>;
+
uart2: serial@12490000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12490000 0x1000>,
@@ -167,6 +170,7 @@
gsbi4: gsbi@16300000 {
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <4>;
reg = <0x16300000 0x100>;
clocks = <&gcc GSBI4_H_CLK>;
clock-names = "iface";
@@ -175,6 +179,8 @@
ranges;
status = "disabled";
+ syscon-tcsr = <&tcsr>;
+
uart4: serial@16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,
@@ -201,6 +207,7 @@
gsbi5: gsbi@1a200000 {
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <5>;
reg = <0x1a200000 0x100>;
clocks = <&gcc GSBI5_H_CLK>;
clock-names = "iface";
@@ -209,6 +216,8 @@
ranges;
status = "disabled";
+ syscon-tcsr = <&tcsr>;
+
uart5: serial@1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x1000>,
@@ -279,6 +288,11 @@
status = "disabled";
};
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-ipq8064", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
+
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;

244
target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
View file

@ -1,244 +0,0 @@
From 5b40516b2f5fb9b2a7d6d3e2e924f12ec9d183a8 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Tue, 21 Apr 2015 19:01:42 -0700
Subject: [PATCH 8/9] ARM: dts: qcom: add pcie nodes to ipq806x platforms
qcom-pcie driver now supports version 0 of the controller. This change
adds the corresponding entries to the IPQ806x dtsi file and
corresponding platform (AP148).
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 30 ++++++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 124 +++++++++++++++++++++++++++++++
2 files changed, 154 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -115,5 +115,15 @@
usb30@1 {
status = "ok";
};
+
+ pcie0: pci@1b500000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
+
+ pcie1: pci@1b700000 {
+ status = "ok";
+ phy-tx0-term-offset = <7>;
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -128,5 +128,17 @@
usb30@1 {
status = "ok";
};
+
+ pcie0: pci@1b500000 {
+ status = "ok";
+ };
+
+ pcie1: pci@1b700000 {
+ status = "ok";
+ };
+
+ pcie2: pci@1b900000 {
+ status = "ok";
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -3,6 +3,9 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Qualcomm IPQ8064";
@@ -83,6 +86,33 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 32 0x4>;
+
+ pcie0_pins: pcie0_pinmux {
+ mux {
+ pins = "gpio3";
+ function = "pcie1_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ pcie1_pins: pcie1_pinmux {
+ mux {
+ pins = "gpio48";
+ function = "pcie2_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ pcie2_pins: pcie2_pinmux {
+ mux {
+ pins = "gpio63";
+ function = "pcie3_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
};
intc: interrupt-controller@2000000 {
@@ -311,6 +341,144 @@
reg = <0x01200600 0x100>;
};
+ pcie0: pci@1b500000 {
+ compatible = "qcom,pcie-v0";
+ reg = <0x1b500000 0x1000
+ 0x1b502000 0x80
+ 0x1b600000 0x100
+ 0x0ff00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_A_CLK>,
+ <&gcc PCIE_H_CLK>,
+ <&gcc PCIE_PHY_CLK>;
+ clock-names = "core", "iface", "phy";
+
+ resets = <&gcc PCIE_ACLK_RESET>,
+ <&gcc PCIE_HCLK_RESET>,
+ <&gcc PCIE_POR_RESET>,
+ <&gcc PCIE_PCI_RESET>,
+ <&gcc PCIE_PHY_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy";
+
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+
+ status = "disabled";
+ };
+
+ pcie1: pci@1b700000 {
+ compatible = "qcom,pcie-v0";
+ reg = <0x1b700000 0x1000
+ 0x1b702000 0x80
+ 0x1b800000 0x100
+ 0x31f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_1_A_CLK>,
+ <&gcc PCIE_1_H_CLK>,
+ <&gcc PCIE_1_PHY_CLK>;
+ clock-names = "core", "iface", "phy";
+
+ resets = <&gcc PCIE_1_ACLK_RESET>,
+ <&gcc PCIE_1_HCLK_RESET>,
+ <&gcc PCIE_1_POR_RESET>,
+ <&gcc PCIE_1_PCI_RESET>,
+ <&gcc PCIE_1_PHY_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy";
+
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+
+ perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+
+ status = "disabled";
+ };
+
+ pcie2: pci@1b900000 {
+ compatible = "qcom,pcie-v0";
+ reg = <0x1b900000 0x1000
+ 0x1b902000 0x80
+ 0x1ba00000 0x100
+ 0x35f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_2_A_CLK>,
+ <&gcc PCIE_2_H_CLK>,
+ <&gcc PCIE_2_PHY_CLK>;
+ clock-names = "core", "iface", "phy";
+
+ resets = <&gcc PCIE_2_ACLK_RESET>,
+ <&gcc PCIE_2_HCLK_RESET>,
+ <&gcc PCIE_2_POR_RESET>,
+ <&gcc PCIE_2_PCI_RESET>,
+ <&gcc PCIE_2_PHY_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy";
+
+ pinctrl-0 = <&pcie2_pins>;
+ pinctrl-names = "default";
+
+ perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+
+ status = "disabled";
+ };
+
hs_phy_1: phy@100f8800 {
compatible = "qcom,dwc3-hs-usb-phy";
reg = <0x100f8800 0x30>;

29
target/linux/ipq806x/patches-3.18/113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
View file

@ -1,29 +0,0 @@
From f004aa1dec6e2e206be025de15b115d60f2b21e3 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Tue, 21 Apr 2015 19:09:07 -0700
Subject: [PATCH 9/9] ARM: qcom: automatically select PCI_DOMAINS if PCI is
enabled
If multiple PCIe devices are present in the system, the kernel will
panic at boot time when trying to scan the PCI buses. This happens on
IPQ806x based platforms, which has 3 PCIe ports.
Enabling this option allows the kernel to assign the pci-domains
according to the device-tree content. This allows multiple PCIe
controllers to coexist in the system.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/mach-qcom/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM
select CLKSRC_OF
select PINCTRL
select QCOM_SCM if SMP
+ select PCI_DOMAINS if PCI
help
Support for Qualcomm's devicetree based systems.

80
target/linux/ipq806x/patches-3.18/115-add-pcie-aux-clk-dts.patch
View file

@ -1,80 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -369,15 +369,21 @@
clocks = <&gcc PCIE_A_CLK>,
<&gcc PCIE_H_CLK>,
- <&gcc PCIE_PHY_CLK>;
- clock-names = "core", "iface", "phy";
+ <&gcc PCIE_PHY_CLK>,
+ <&gcc PCIE_AUX_CLK>,
+ <&gcc PCIE_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
resets = <&gcc PCIE_ACLK_RESET>,
<&gcc PCIE_HCLK_RESET>,
<&gcc PCIE_POR_RESET>,
<&gcc PCIE_PCI_RESET>,
- <&gcc PCIE_PHY_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy";
+ <&gcc PCIE_PHY_RESET>,
+ <&gcc PCIE_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
@@ -415,15 +421,21 @@
clocks = <&gcc PCIE_1_A_CLK>,
<&gcc PCIE_1_H_CLK>,
- <&gcc PCIE_1_PHY_CLK>;
- clock-names = "core", "iface", "phy";
+ <&gcc PCIE_1_PHY_CLK>,
+ <&gcc PCIE_1_AUX_CLK>,
+ <&gcc PCIE_1_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
resets = <&gcc PCIE_1_ACLK_RESET>,
<&gcc PCIE_1_HCLK_RESET>,
<&gcc PCIE_1_POR_RESET>,
<&gcc PCIE_1_PCI_RESET>,
- <&gcc PCIE_1_PHY_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy";
+ <&gcc PCIE_1_PHY_RESET>,
+ <&gcc PCIE_1_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
@@ -461,15 +473,21 @@
clocks = <&gcc PCIE_2_A_CLK>,
<&gcc PCIE_2_H_CLK>,
- <&gcc PCIE_2_PHY_CLK>;
- clock-names = "core", "iface", "phy";
+ <&gcc PCIE_2_PHY_CLK>,
+ <&gcc PCIE_2_AUX_CLK>,
+ <&gcc PCIE_2_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
resets = <&gcc PCIE_2_ACLK_RESET>,
<&gcc PCIE_2_HCLK_RESET>,
<&gcc PCIE_2_POR_RESET>,
<&gcc PCIE_2_PCI_RESET>,
- <&gcc PCIE_2_PHY_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy";
+ <&gcc PCIE_2_PHY_RESET>,
+ <&gcc PCIE_2_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
pinctrl-0 = <&pcie2_pins>;
pinctrl-names = "default";

654
target/linux/ipq806x/patches-3.18/120-mfd-qcom-rpm-Driver-for-the-Qualcomm-RPM.patch
View file

@ -1,654 +0,0 @@
From 58e214382bdd1eb48c5a3519182bddcb26edabad Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Date: Wed, 26 Nov 2014 13:51:00 -0800
Subject: [PATCH] mfd: qcom-rpm: Driver for the Qualcomm RPM
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
and 8064 based devices. The driver exposes resources that child drivers
can operate on; to implementing regulator, clock and bus frequency
drivers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/Kconfig | 14 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/qcom_rpm.c | 581 +++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/qcom_rpm.h | 13 +
4 files changed, 609 insertions(+)
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 include/linux/mfd/qcom_rpm.h
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -567,6 +567,20 @@ config MFD_PM8921_CORE
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
+config MFD_QCOM_RPM
+ tristate "Qualcomm Resource Power Manager (RPM)"
+ depends on ARCH_QCOM && OF
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8660, 8960 and
+ 8064 based devices.
+
+ This is required to access many regulators, clocks and bus
+ frequencies controlled by the RPM on these devices.
+
+ Say M here if you want to include support for the Qualcomm RPM as a
+ module. This will build a module called "qcom_rpm".
+
config MFD_SPMI_PMIC
tristate "Qualcomm SPMI PMICs"
depends on ARCH_QCOM || COMPILE_TEST
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
+obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
--- /dev/null
+++ b/drivers/mfd/qcom_rpm.c
@@ -0,0 +1,581 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Author: Bjorn Andersson <bjorn.andersson@sonymobile.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/qcom_rpm.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/mfd/qcom-rpm.h>
+
+struct qcom_rpm_resource {
+ unsigned target_id;
+ unsigned status_id;
+ unsigned select_id;
+ unsigned size;
+};
+
+struct qcom_rpm_data {
+ u32 version;
+ const struct qcom_rpm_resource *resource_table;
+ unsigned n_resources;
+};
+
+struct qcom_rpm {
+ struct device *dev;
+ struct regmap *ipc_regmap;
+ unsigned ipc_offset;
+ unsigned ipc_bit;
+
+ struct completion ack;
+ struct mutex lock;
+
+ void __iomem *status_regs;
+ void __iomem *ctrl_regs;
+ void __iomem *req_regs;
+
+ u32 ack_status;
+
+ const struct qcom_rpm_data *data;
+};
+
+#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4)
+#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4)
+#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4)
+
+#define RPM_REQUEST_TIMEOUT (5 * HZ)
+
+#define RPM_REQUEST_CONTEXT 3
+#define RPM_REQ_SELECT 11
+#define RPM_ACK_CONTEXT 15
+#define RPM_ACK_SELECTOR 23
+#define RPM_SELECT_SIZE 7
+
+#define RPM_NOTIFICATION BIT(30)
+#define RPM_REJECTED BIT(31)
+
+#define RPM_SIGNAL BIT(2)
+
+static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 },
+ [QCOM_RPM_PM8921_SMPS1] = { 116, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 118, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 120, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 122, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 124, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 126, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 128, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 130, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 132, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 134, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 136, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 138, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 140, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 142, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 144, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 146, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 148, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 150, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 152, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 154, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 156, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 158, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 160, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 162, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 164, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 166, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 168, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 170, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 172, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 174, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 176, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 178, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 180, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 182, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 184, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 186, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 188, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 },
+ [QCOM_RPM_PM8821_SMPS1] = { 201, 116, 76, 2 },
+ [QCOM_RPM_PM8821_SMPS2] = { 203, 118, 77, 2 },
+ [QCOM_RPM_PM8821_LDO1] = { 205, 120, 78, 2 },
+ [QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
+};
+
+static const struct qcom_rpm_data apq8064_template = {
+ .version = 3,
+ .resource_table = apq8064_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 },
+ [QCOM_RPM_PLL_4] = { 34, 14, 7, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 },
+ [QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 },
+ [QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 },
+ [QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 },
+ [QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 },
+ [QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 },
+ [QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 },
+ [QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 },
+ [QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 },
+ [QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 },
+ [QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 },
+ [QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 },
+ [QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 },
+ [QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 },
+ [QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 },
+ [QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 },
+ [QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 },
+ [QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 },
+ [QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 },
+ [QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 },
+ [QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 },
+ [QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 },
+ [QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 },
+ [QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 },
+ [QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 },
+ [QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 },
+ [QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 },
+ [QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 },
+ [QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 },
+ [QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 },
+ [QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 },
+ [QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 },
+ [QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 },
+ [QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 },
+ [QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 },
+ [QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 },
+ [QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 },
+ [QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 },
+ [QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 },
+ [QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 },
+ [QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 },
+ [QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 },
+ [QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 },
+ [QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 },
+ [QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 },
+ [QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 },
+ [QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 },
+ [QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 },
+ [QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 },
+ [QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 },
+ [QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 },
+ [QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 },
+ [QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 },
+ [QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 },
+};
+
+static const struct qcom_rpm_data msm8660_template = {
+ .version = 2,
+ .resource_table = msm8660_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 },
+ [QCOM_RPM_PM8921_SMPS1] = { 117, 31, 30, 2 },
+ [QCOM_RPM_PM8921_SMPS2] = { 119, 33, 31, 2 },
+ [QCOM_RPM_PM8921_SMPS3] = { 121, 35, 32, 2 },
+ [QCOM_RPM_PM8921_SMPS4] = { 123, 37, 33, 2 },
+ [QCOM_RPM_PM8921_SMPS5] = { 125, 39, 34, 2 },
+ [QCOM_RPM_PM8921_SMPS6] = { 127, 41, 35, 2 },
+ [QCOM_RPM_PM8921_SMPS7] = { 129, 43, 36, 2 },
+ [QCOM_RPM_PM8921_SMPS8] = { 131, 45, 37, 2 },
+ [QCOM_RPM_PM8921_LDO1] = { 133, 47, 38, 2 },
+ [QCOM_RPM_PM8921_LDO2] = { 135, 49, 39, 2 },
+ [QCOM_RPM_PM8921_LDO3] = { 137, 51, 40, 2 },
+ [QCOM_RPM_PM8921_LDO4] = { 139, 53, 41, 2 },
+ [QCOM_RPM_PM8921_LDO5] = { 141, 55, 42, 2 },
+ [QCOM_RPM_PM8921_LDO6] = { 143, 57, 43, 2 },
+ [QCOM_RPM_PM8921_LDO7] = { 145, 59, 44, 2 },
+ [QCOM_RPM_PM8921_LDO8] = { 147, 61, 45, 2 },
+ [QCOM_RPM_PM8921_LDO9] = { 149, 63, 46, 2 },
+ [QCOM_RPM_PM8921_LDO10] = { 151, 65, 47, 2 },
+ [QCOM_RPM_PM8921_LDO11] = { 153, 67, 48, 2 },
+ [QCOM_RPM_PM8921_LDO12] = { 155, 69, 49, 2 },
+ [QCOM_RPM_PM8921_LDO13] = { 157, 71, 50, 2 },
+ [QCOM_RPM_PM8921_LDO14] = { 159, 73, 51, 2 },
+ [QCOM_RPM_PM8921_LDO15] = { 161, 75, 52, 2 },
+ [QCOM_RPM_PM8921_LDO16] = { 163, 77, 53, 2 },
+ [QCOM_RPM_PM8921_LDO17] = { 165, 79, 54, 2 },
+ [QCOM_RPM_PM8921_LDO18] = { 167, 81, 55, 2 },
+ [QCOM_RPM_PM8921_LDO19] = { 169, 83, 56, 2 },
+ [QCOM_RPM_PM8921_LDO20] = { 171, 85, 57, 2 },
+ [QCOM_RPM_PM8921_LDO21] = { 173, 87, 58, 2 },
+ [QCOM_RPM_PM8921_LDO22] = { 175, 89, 59, 2 },
+ [QCOM_RPM_PM8921_LDO23] = { 177, 91, 60, 2 },
+ [QCOM_RPM_PM8921_LDO24] = { 179, 93, 61, 2 },
+ [QCOM_RPM_PM8921_LDO25] = { 181, 95, 62, 2 },
+ [QCOM_RPM_PM8921_LDO26] = { 183, 97, 63, 2 },
+ [QCOM_RPM_PM8921_LDO27] = { 185, 99, 64, 2 },
+ [QCOM_RPM_PM8921_LDO28] = { 187, 101, 65, 2 },
+ [QCOM_RPM_PM8921_LDO29] = { 189, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 },
+ [QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 },
+};
+
+static const struct qcom_rpm_data msm8960_template = {
+ .version = 3,
+ .resource_table = msm8960_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
+};
+
+static const struct of_device_id qcom_rpm_of_match[] = {
+ { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
+ { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
+ { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
+
+int qcom_rpm_write(struct qcom_rpm *rpm,
+ int state,
+ int resource,
+ u32 *buf, size_t count)
+{
+ const struct qcom_rpm_resource *res;
+ const struct qcom_rpm_data *data = rpm->data;
+ u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
+ int left;
+ int ret = 0;
+ int i;
+
+ if (WARN_ON(resource < 0 || resource >= data->n_resources))
+ return -EINVAL;
+
+ res = &data->resource_table[resource];
+ if (WARN_ON(res->size != count))
+ return -EINVAL;
+
+ mutex_lock(&rpm->lock);
+
+ for (i = 0; i < res->size; i++)
+ writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
+
+ bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
+ for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
+ writel_relaxed(sel_mask[i],
+ RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
+ }
+
+ writel_relaxed(BIT(state), RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
+
+ reinit_completion(&rpm->ack);
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+
+ left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
+ if (!left)
+ ret = -ETIMEDOUT;
+ else if (rpm->ack_status & RPM_REJECTED)
+ ret = -EIO;
+
+ mutex_unlock(&rpm->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_rpm_write);
+
+static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+ u32 ack;
+ int i;
+
+ ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+ for (i = 0; i < RPM_SELECT_SIZE; i++)
+ writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));
+ writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+
+ if (ack & RPM_NOTIFICATION) {
+ dev_warn(rpm->dev, "ignoring notification!\n");
+ } else {
+ rpm->ack_status = ack;
+ complete(&rpm->ack);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+ dev_err(rpm->dev, "RPM triggered fatal error\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+static int qcom_rpm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device_node *syscon_np;
+ struct resource *res;
+ struct qcom_rpm *rpm;
+ u32 fw_version[3];
+ int irq_wakeup;
+ int irq_ack;
+ int irq_err;
+ int ret;
+
+ rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
+ if (!rpm)
+ return -ENOMEM;
+
+ rpm->dev = &pdev->dev;
+ mutex_init(&rpm->lock);
+ init_completion(&rpm->ack);
+
+ irq_ack = platform_get_irq_byname(pdev, "ack");
+ if (irq_ack < 0) {
+ dev_err(&pdev->dev, "required ack interrupt missing\n");
+ return irq_ack;
+ }
+
+ irq_err = platform_get_irq_byname(pdev, "err");
+ if (irq_err < 0) {
+ dev_err(&pdev->dev, "required err interrupt missing\n");
+ return irq_err;
+ }
+
+ irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
+ if (irq_wakeup < 0) {
+ dev_err(&pdev->dev, "required wakeup interrupt missing\n");
+ return irq_wakeup;
+ }
+
+ match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+ rpm->data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rpm->status_regs))
+ return PTR_ERR(rpm->status_regs);
+ rpm->ctrl_regs = rpm->status_regs + 0x400;
+ rpm->req_regs = rpm->status_regs + 0x600;
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
+ if (!syscon_np) {
+ dev_err(&pdev->dev, "no qcom,ipc node\n");
+ return -ENODEV;
+ }
+
+ rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(rpm->ipc_regmap))
+ return PTR_ERR(rpm->ipc_regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
+ &rpm->ipc_offset);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
+ &rpm->ipc_bit);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no bit in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ dev_set_drvdata(&pdev->dev, rpm);
+
+ fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
+ fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
+ fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
+ if (fw_version[0] != rpm->data->version) {
+ dev_err(&pdev->dev,
+ "RPM version %u.%u.%u incompatible with driver version %u",
+ fw_version[0],
+ fw_version[1],
+ fw_version[2],
+ rpm->data->version);
+ return -EFAULT;
+ }
+
+ dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
+ fw_version[1],
+ fw_version[2]);
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_ack,
+ qcom_rpm_ack_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
+ "qcom_rpm_ack",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request ack interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_ack, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_err,
+ qcom_rpm_err_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_err",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request err interrupt\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_wakeup,
+ qcom_rpm_wakeup_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_wakeup",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_wakeup, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
+
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+static int qcom_rpm_remove(struct platform_device *pdev)
+{
+ of_platform_depopulate(&pdev->dev);
+ return 0;
+}
+
+static struct platform_driver qcom_rpm_driver = {
+ .probe = qcom_rpm_probe,
+ .remove = qcom_rpm_remove,
+ .driver = {
+ .name = "qcom_rpm",
+ .of_match_table = qcom_rpm_of_match,
+ },
+};
+
+static int __init qcom_rpm_init(void)
+{
+ return platform_driver_register(&qcom_rpm_driver);
+}
+arch_initcall(qcom_rpm_init);
+
+static void __exit qcom_rpm_exit(void)
+{
+ platform_driver_unregister(&qcom_rpm_driver);
+}
+module_exit(qcom_rpm_exit)
+
+MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
--- /dev/null
+++ b/include/linux/mfd/qcom_rpm.h
@@ -0,0 +1,13 @@
+#ifndef __QCOM_RPM_H__
+#define __QCOM_RPM_H__
+
+#include <linux/types.h>
+
+struct qcom_rpm;
+
+#define QCOM_RPM_ACTIVE_STATE 0
+#define QCOM_RPM_SLEEP_STATE 1
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int state, int resource, u32 *buf, size_t count);
+
+#endif

71
target/linux/ipq806x/patches-3.18/121-mfd-qcom_rpm-Add-support-for-IPQ8064.patch
View file

@ -1,71 +0,0 @@
From 4d54b0adfa67476e6509bc8646b9dbac642e8a29 Mon Sep 17 00:00:00 2001
From: Josh Cartwright <joshc@codeaurora.org>
Date: Thu, 26 Mar 2015 11:29:26 -0700
Subject: [PATCH] mfd: qcom_rpm: Add support for IPQ8064
The IPQ8064 also includes an RPM following the same message structure as
other chips. In addition, it supports a few new resource types to
support the NSS fabric clocks and the SMB208/SMB209 regulators found on
the reference boards.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/qcom_rpm.c | 41 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -323,10 +323,51 @@ static const struct qcom_rpm_data msm896
.n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
};
+static const struct qcom_rpm_resource ipq806x_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_NSS_FABRIC_0_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_NSS_FABRIC_1_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 3 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 2 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 3 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 2 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 3 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 209, 33, 31, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 34, 32, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 211, 35, 33, 1 },
+ [QCOM_RPM_DDR_DMM] = { 212, 36, 34, 2 },
+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 40, 39, 1 },
+ [QCOM_RPM_SMB208_S1a] = { 216, 41, 90, 2 },
+ [QCOM_RPM_SMB208_S1b] = { 218, 43, 91, 2 },
+ [QCOM_RPM_SMB208_S2a] = { 220, 45, 92, 2 },
+ [QCOM_RPM_SMB208_S2b] = { 222, 47, 93, 2 },
+};
+
+static const struct qcom_rpm_data ipq806x_template = {
+ .version = 3,
+ .resource_table = ipq806x_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(ipq806x_rpm_resource_table),
+};
+
static const struct of_device_id qcom_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
+ { .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);

247
target/linux/ipq806x/patches-3.18/122-mfd-devicetree-bindings-Add-Qualcomm-RPM-DT-binding.patch
View file

@ -1,247 +0,0 @@
From aa0c4b815045420ea54d5ae5362f5a0190609d46 Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Date: Wed, 26 Nov 2014 13:50:59 -0800
Subject: [PATCH] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
8960 and 8064 based devices.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 70 ++++++++++
include/dt-bindings/mfd/qcom-rpm.h | 154 +++++++++++++++++++++
2 files changed, 224 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt
create mode 100644 include/dt-bindings/mfd/qcom-rpm.h
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -0,0 +1,70 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-apq8064"
+ "qcom,rpm-msm8660"
+ "qcom,rpm-msm8960"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address and size of the RPM's message ram
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the RPM's:
+ 1. acknowledgement interrupt
+ 2. error interrupt
+ 3. wakeup interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <string-array>
+ Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the RPM:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+
+= EXAMPLE
+
+ #include <dt-bindings/mfd/qcom-rpm.h>
+
+ rpm@108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&apcs 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
--- /dev/null
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -0,0 +1,154 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
+#define _DT_BINDINGS_MFD_QCOM_RPM_H
+
+/*
+ * Constants use to identify individual resources in the RPM.
+ */
+#define QCOM_RPM_APPS_FABRIC_ARB 1
+#define QCOM_RPM_APPS_FABRIC_CLK 2
+#define QCOM_RPM_APPS_FABRIC_HALT 3
+#define QCOM_RPM_APPS_FABRIC_IOCTL 4
+#define QCOM_RPM_APPS_FABRIC_MODE 5
+#define QCOM_RPM_APPS_L2_CACHE_CTL 6
+#define QCOM_RPM_CFPB_CLK 7
+#define QCOM_RPM_CXO_BUFFERS 8
+#define QCOM_RPM_CXO_CLK 9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK 10
+#define QCOM_RPM_DDR_DMM 11
+#define QCOM_RPM_EBI1_CLK 12
+#define QCOM_RPM_HDMI_SWITCH 13
+#define QCOM_RPM_MMFPB_CLK 14
+#define QCOM_RPM_MM_FABRIC_ARB 15
+#define QCOM_RPM_MM_FABRIC_CLK 16
+#define QCOM_RPM_MM_FABRIC_HALT 17
+#define QCOM_RPM_MM_FABRIC_IOCTL 18
+#define QCOM_RPM_MM_FABRIC_MODE 19
+#define QCOM_RPM_PLL_4 20
+#define QCOM_RPM_PM8058_LDO0 21
+#define QCOM_RPM_PM8058_LDO1 22
+#define QCOM_RPM_PM8058_LDO2 23
+#define QCOM_RPM_PM8058_LDO3 24
+#define QCOM_RPM_PM8058_LDO4 25
+#define QCOM_RPM_PM8058_LDO5 26
+#define QCOM_RPM_PM8058_LDO6 27
+#define QCOM_RPM_PM8058_LDO7 28
+#define QCOM_RPM_PM8058_LDO8 29
+#define QCOM_RPM_PM8058_LDO9 30
+#define QCOM_RPM_PM8058_LDO10 31
+#define QCOM_RPM_PM8058_LDO11 32
+#define QCOM_RPM_PM8058_LDO12 33
+#define QCOM_RPM_PM8058_LDO13 34
+#define QCOM_RPM_PM8058_LDO14 35
+#define QCOM_RPM_PM8058_LDO15 36
+#define QCOM_RPM_PM8058_LDO16 37
+#define QCOM_RPM_PM8058_LDO17 38
+#define QCOM_RPM_PM8058_LDO18 39
+#define QCOM_RPM_PM8058_LDO19 40
+#define QCOM_RPM_PM8058_LDO20 41
+#define QCOM_RPM_PM8058_LDO21 42
+#define QCOM_RPM_PM8058_LDO22 43
+#define QCOM_RPM_PM8058_LDO23 44
+#define QCOM_RPM_PM8058_LDO24 45
+#define QCOM_RPM_PM8058_LDO25 46
+#define QCOM_RPM_PM8058_LVS0 47
+#define QCOM_RPM_PM8058_LVS1 48
+#define QCOM_RPM_PM8058_NCP 49
+#define QCOM_RPM_PM8058_SMPS0 50
+#define QCOM_RPM_PM8058_SMPS1 51
+#define QCOM_RPM_PM8058_SMPS2 52
+#define QCOM_RPM_PM8058_SMPS3 53
+#define QCOM_RPM_PM8058_SMPS4 54
+#define QCOM_RPM_PM8821_LDO1 55
+#define QCOM_RPM_PM8821_SMPS1 56
+#define QCOM_RPM_PM8821_SMPS2 57
+#define QCOM_RPM_PM8901_LDO0 58
+#define QCOM_RPM_PM8901_LDO1 59
+#define QCOM_RPM_PM8901_LDO2 60
+#define QCOM_RPM_PM8901_LDO3 61
+#define QCOM_RPM_PM8901_LDO4 62
+#define QCOM_RPM_PM8901_LDO5 63
+#define QCOM_RPM_PM8901_LDO6 64
+#define QCOM_RPM_PM8901_LVS0 65
+#define QCOM_RPM_PM8901_LVS1 66
+#define QCOM_RPM_PM8901_LVS2 67
+#define QCOM_RPM_PM8901_LVS3 68
+#define QCOM_RPM_PM8901_MVS 69
+#define QCOM_RPM_PM8901_SMPS0 70
+#define QCOM_RPM_PM8901_SMPS1 71
+#define QCOM_RPM_PM8901_SMPS2 72
+#define QCOM_RPM_PM8901_SMPS3 73
+#define QCOM_RPM_PM8901_SMPS4 74
+#define QCOM_RPM_PM8921_CLK1 75
+#define QCOM_RPM_PM8921_CLK2 76
+#define QCOM_RPM_PM8921_LDO1 77
+#define QCOM_RPM_PM8921_LDO2 78
+#define QCOM_RPM_PM8921_LDO3 79
+#define QCOM_RPM_PM8921_LDO4 80
+#define QCOM_RPM_PM8921_LDO5 81
+#define QCOM_RPM_PM8921_LDO6 82
+#define QCOM_RPM_PM8921_LDO7 83
+#define QCOM_RPM_PM8921_LDO8 84
+#define QCOM_RPM_PM8921_LDO9 85
+#define QCOM_RPM_PM8921_LDO10 86
+#define QCOM_RPM_PM8921_LDO11 87
+#define QCOM_RPM_PM8921_LDO12 88
+#define QCOM_RPM_PM8921_LDO13 89
+#define QCOM_RPM_PM8921_LDO14 90
+#define QCOM_RPM_PM8921_LDO15 91
+#define QCOM_RPM_PM8921_LDO16 92
+#define QCOM_RPM_PM8921_LDO17 93
+#define QCOM_RPM_PM8921_LDO18 94
+#define QCOM_RPM_PM8921_LDO19 95
+#define QCOM_RPM_PM8921_LDO20 96
+#define QCOM_RPM_PM8921_LDO21 97
+#define QCOM_RPM_PM8921_LDO22 98
+#define QCOM_RPM_PM8921_LDO23 99
+#define QCOM_RPM_PM8921_LDO24 100
+#define QCOM_RPM_PM8921_LDO25 101
+#define QCOM_RPM_PM8921_LDO26 102
+#define QCOM_RPM_PM8921_LDO27 103
+#define QCOM_RPM_PM8921_LDO28 104
+#define QCOM_RPM_PM8921_LDO29 105
+#define QCOM_RPM_PM8921_LVS1 106
+#define QCOM_RPM_PM8921_LVS2 107
+#define QCOM_RPM_PM8921_LVS3 108
+#define QCOM_RPM_PM8921_LVS4 109
+#define QCOM_RPM_PM8921_LVS5 110
+#define QCOM_RPM_PM8921_LVS6 111
+#define QCOM_RPM_PM8921_LVS7 112
+#define QCOM_RPM_PM8921_MVS 113
+#define QCOM_RPM_PM8921_NCP 114
+#define QCOM_RPM_PM8921_SMPS1 115
+#define QCOM_RPM_PM8921_SMPS2 116
+#define QCOM_RPM_PM8921_SMPS3 117
+#define QCOM_RPM_PM8921_SMPS4 118
+#define QCOM_RPM_PM8921_SMPS5 119
+#define QCOM_RPM_PM8921_SMPS6 120
+#define QCOM_RPM_PM8921_SMPS7 121
+#define QCOM_RPM_PM8921_SMPS8 122
+#define QCOM_RPM_PXO_CLK 123
+#define QCOM_RPM_QDSS_CLK 124
+#define QCOM_RPM_SFPB_CLK 125
+#define QCOM_RPM_SMI_CLK 126
+#define QCOM_RPM_SYS_FABRIC_ARB 127
+#define QCOM_RPM_SYS_FABRIC_CLK 128
+#define QCOM_RPM_SYS_FABRIC_HALT 129
+#define QCOM_RPM_SYS_FABRIC_IOCTL 130
+#define QCOM_RPM_SYS_FABRIC_MODE 131
+#define QCOM_RPM_USB_OTG_SWITCH 132
+#define QCOM_RPM_VDDMIN_GPIO 133
+
+/*
+ * Constants used to select force mode for regulators.
+ */
+#define QCOM_RPM_FORCE_MODE_NONE 0
+#define QCOM_RPM_FORCE_MODE_LPM 1
+#define QCOM_RPM_FORCE_MODE_HPM 2
+#define QCOM_RPM_FORCE_MODE_AUTO 3
+#define QCOM_RPM_FORCE_MODE_BYPASS 4
+
+#endif

42
target/linux/ipq806x/patches-3.18/123-mfd-devicetree-qcom_rpm-Document-IPQ8064-resources.patch
View file

@ -1,42 +0,0 @@
From 30bc3aa5c4ed3072bdff7d915772df1b91307ed4 Mon Sep 17 00:00:00 2001
From: Josh Cartwright <joshc@codeaurora.org>
Date: Thu, 26 Mar 2015 11:29:25 -0700
Subject: [PATCH] mfd: devicetree: qcom_rpm: Document IPQ8064 resources
The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick
clock and four regulator resources. Provide definitions for them.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
[sboyd@codeaurora.org: Drop regulator part of binding]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 +
include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++
2 files changed, 7 insertions(+)
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -12,6 +12,7 @@ frequencies.
"qcom,rpm-apq8064"
"qcom,rpm-msm8660"
"qcom,rpm-msm8960"
+ "qcom,rpm-ipq8064"
- reg:
Usage: required
--- a/include/dt-bindings/mfd/qcom-rpm.h
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -141,6 +141,12 @@
#define QCOM_RPM_SYS_FABRIC_MODE 131
#define QCOM_RPM_USB_OTG_SWITCH 132
#define QCOM_RPM_VDDMIN_GPIO 133
+#define QCOM_RPM_NSS_FABRIC_0_CLK 134
+#define QCOM_RPM_NSS_FABRIC_1_CLK 135
+#define QCOM_RPM_SMB208_S1a 136
+#define QCOM_RPM_SMB208_S1b 137
+#define QCOM_RPM_SMB208_S2a 138
+#define QCOM_RPM_SMB208_S2b 139
/*
* Constants used to select force mode for regulators.

58
target/linux/ipq806x/patches-3.18/124-regulator-rpm-add-support-for-RPM-controller-SMB208.patch
View file

@ -1,58 +0,0 @@
From 0f5bb5b5de3b18877373f746bdb85d8ea0efeedf Mon Sep 17 00:00:00 2001
From: Josh Cartwright <joshc@codeaurora.org>
Date: Thu, 20 Nov 2014 13:41:25 -0600
Subject: [PATCH] regulator: rpm: add support for RPM-controller SMB208
The IPQ8064 reference boards make use of SMB208 regulators which are
controlled by RPM. Implement support for these regulators in the RPM
regulator driver.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/qcom_rpm-regulator.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -183,6 +183,13 @@ static const struct regulator_linear_ran
REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
};
+static const struct regulator_linear_range smb208_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000),
+};
+
static const struct regulator_linear_range ncp_ranges[] = {
REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
};
@@ -559,6 +566,16 @@ static const struct qcom_rpm_reg pm8921_
.parts = &rpm8960_switch_parts,
};
+static const struct qcom_rpm_reg smb208_smps = {
+ .desc.linear_ranges = smb208_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges),
+ .desc.n_voltages = 235,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
{ .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
@@ -578,6 +595,8 @@ static const struct of_device_id rpm_of_
{ .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
{ .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
{ .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+
+ { .compatible = "qcom,rpm-smb208", .data = &smb208_smps },
{ }
};
MODULE_DEVICE_TABLE(of, rpm_of_match);

25
target/linux/ipq806x/patches-3.18/125-regulator-qcom-rpm-Add-missing-state-flag-in-call-to.patch
View file

@ -1,25 +0,0 @@
From 803926825fa4db007437f76654e3e63bafb9b906 Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Date: Wed, 26 Nov 2014 13:51:01 -0800
Subject: [PATCH] regulator: qcom-rpm: Add missing state flag in call to RPM
This adds the missing state parameter to the call down to the RPM. This
is currently hard coded to the active state, as that's all we're
supporting at this moment.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/regulator/qcom_rpm-regulator.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -205,6 +205,7 @@ static int rpm_reg_write(struct qcom_rpm
vreg->val[req->word] |= value << req->shift;
return qcom_rpm_write(vreg->rpm,
+ QCOM_RPM_ACTIVE_STATE,
vreg->resource,
vreg->val,
vreg->parts->request_len);

87
target/linux/ipq806x/patches-3.18/126-add-rpm-to-ipq8064-dts.patch
View file

@ -1,87 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -2,6 +2,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -77,6 +78,63 @@
ranges;
compatible = "simple-bus";
+ rpm@108000 {
+ compatible = "qcom,rpm-ipq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <0 19 0>,
+ <0 21 0>,
+ <0 22 0>;
+ interrupt-names = "ack",
+ "err",
+ "wakeup";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb208_s1a: smb208-s1a {
+ compatible = "qcom,rpm-smb208";
+ reg = <QCOM_RPM_SMB208_S1a>;
+
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+
+ };
+
+ smb208_s1b: smb208-s1b {
+ compatible = "qcom,rpm-smb208";
+ reg = <QCOM_RPM_SMB208_S1b>;
+
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2a: smb208-s2a {
+ compatible = "qcom,rpm-smb208";
+ reg = <QCOM_RPM_SMB208_S2a>;
+
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2b: smb208-s2b {
+ compatible = "qcom,rpm-smb208";
+ reg = <QCOM_RPM_SMB208_S2b>;
+
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+ };
+
qcom_pinmux: pinmux@800000 {
compatible = "qcom,ipq8064-pinctrl";
reg = <0x800000 0x4000>;
@@ -148,6 +206,12 @@
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
};
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
+ clock-output-names = "acpu_l2_aux";
+ };
+
saw0: regulator@2089000 {
compatible = "qcom,saw2";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;

55
target/linux/ipq806x/patches-3.18/130-clk_mux-Fix-set_parent-doing-the-wrong-thing-when-IN.patch
View file

@ -1,55 +0,0 @@
From 6793b3cd5da817c4be218bd8632f07cf4d2b0d26 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 19 Nov 2014 14:48:59 +0100
Subject: [PATCH] clk_mux: Fix set_parent doing the wrong thing when INDEX_BIT
&& index >= 3
If CLK_MUX_INDEX_BIT is set, then each bit turns on / off a single parent,
so theoretically multiple parents could be enabled at the same time, but in
practice only one bit should ever be 1. So to select parent 0, set
the register (*) to 0x01, to select parent 1 set it 0x02, parent 2, 0x04,
parent 3, 0x08, etc.
But the current code does:
if (mux->flags & CLK_MUX_INDEX_BIT)
index = (1 << ffs(index));
Which means that:
For an input index of 0, ffs returns 0, so we set the register
to 0x01, ok.
For an input index of 1, ffs returns 1, so we set the register
to 0x02, ok.
For an input index of 2, ffs returns 2, so we set the register
to 0x04, ok.
For an input index of 3, ffs returns 1, so we set the register
to 0x02, not good!
The code should simply be:
if (mux->flags & CLK_MUX_INDEX_BIT)
index = 1 << index;
Which always does the right thing, this commit fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
---
drivers/clk/clk-mux.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -77,7 +77,7 @@ static int clk_mux_set_parent(struct clk
else {
if (mux->flags & CLK_MUX_INDEX_BIT)
- index = (1 << ffs(index));
+ index = 1 << index;
if (mux->flags & CLK_MUX_INDEX_ONE)
index++;

120
target/linux/ipq806x/patches-3.18/131-clk-Add-__clk_mux_determine_rate_closest.patch
View file

@ -1,120 +0,0 @@
From 15a02c1f6dd7c2bb150c61d00ffb33f584ff2288 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Mon, 19 Jan 2015 18:05:28 -0800
Subject: [PATCH] clk: Add __clk_mux_determine_rate_closest
Some clock drivers want to find the closest rate on the input of
a mux instead of a rate that's less than or equal to the desired
rate. Add a generic mux function to support this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Kenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
---
drivers/clk/clk.c | 47 +++++++++++++++++++++++++++++++++++---------
include/linux/clk-provider.h | 8 +++++++-
2 files changed, 45 insertions(+), 10 deletions(-)
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -695,14 +695,20 @@ struct clk *__clk_lookup(const char *nam
return NULL;
}
-/*
- * Helper for finding best parent to provide a given frequency. This can be used
- * directly as a determine_rate callback (e.g. for a mux), or from a more
- * complex clock that may combine a mux with other operations.
- */
-long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *best_parent_rate,
- struct clk **best_parent_p)
+static bool mux_is_better_rate(unsigned long rate, unsigned long now,
+ unsigned long best, unsigned long flags)
+{
+ if (flags & CLK_MUX_ROUND_CLOSEST)
+ return abs(now - rate) < abs(best - rate);
+
+ return now <= rate && now > best;
+}
+
+static long
+clk_mux_determine_rate_flags(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p,
+ unsigned long flags)
{
struct clk *clk = hw->clk, *parent, *best_parent = NULL;
int i, num_parents;
@@ -730,7 +736,7 @@ long __clk_mux_determine_rate(struct clk
parent_rate = __clk_round_rate(parent, rate);
else
parent_rate = __clk_get_rate(parent);
- if (parent_rate <= rate && parent_rate > best) {
+ if (mux_is_better_rate(rate, parent_rate, best, flags)) {
best_parent = parent;
best = parent_rate;
}
@@ -743,8 +749,31 @@ out:
return best;
}
+
+/*
+ * Helper for finding best parent to provide a given frequency. This can be used
+ * directly as a determine_rate callback (e.g. for a mux), or from a more
+ * complex clock that may combine a mux with other operations.
+ */
+long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p)
+{
+ return clk_mux_determine_rate_flags(hw, rate, best_parent_rate,
+ best_parent_p, 0);
+}
EXPORT_SYMBOL_GPL(__clk_mux_determine_rate);
+long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p)
+{
+ return clk_mux_determine_rate_flags(hw, rate, best_parent_rate,
+ best_parent_p,
+ CLK_MUX_ROUND_CLOSEST);
+}
+EXPORT_SYMBOL_GPL(__clk_mux_determine_rate_closest);
+
/*** clk api ***/
void __clk_unprepare(struct clk *clk)
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -382,6 +382,8 @@ struct clk *clk_register_divider_table(s
* register, and mask of mux bits are in higher 16-bit of this register.
* While setting the mux bits, higher 16-bit should also be updated to
* indicate changing mux bits.
+ * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
+ * frequency.
*/
struct clk_mux {
struct clk_hw hw;
@@ -396,7 +398,8 @@ struct clk_mux {
#define CLK_MUX_INDEX_ONE BIT(0)
#define CLK_MUX_INDEX_BIT BIT(1)
#define CLK_MUX_HIWORD_MASK BIT(2)
-#define CLK_MUX_READ_ONLY BIT(3) /* mux setting cannot be changed */
+#define CLK_MUX_READ_ONLY BIT(3) /* mux can't be changed */
+#define CLK_MUX_ROUND_CLOSEST BIT(4)
extern const struct clk_ops clk_mux_ops;
extern const struct clk_ops clk_mux_ro_ops;
@@ -554,6 +557,9 @@ struct clk *__clk_lookup(const char *nam
long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *best_parent_rate,
struct clk **best_parent_p);
+long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p);
/*
* FIXME clock api without lock protection

115
target/linux/ipq806x/patches-3.18/132-clk-Add-clk_unregister_-divider-gate-mux-to-close-me.patch
View file

@ -1,115 +0,0 @@
From 4e3c021fb995bcbb5d1f814d00584cb80eb904a8 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Mon, 5 Jan 2015 10:52:40 +0100
Subject: [PATCH] clk: Add clk_unregister_{divider, gate, mux} to close memory
leak
The common clk_register_{divider,gate,mux} functions allocated memory
for internal data which wasn't freed anywhere. Drivers using these
helpers could only unregister clocks but the memory would still leak.
Add corresponding unregister functions which will release all resources.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
---
drivers/clk/clk-divider.c | 16 ++++++++++++++++
drivers/clk/clk-gate.c | 16 ++++++++++++++++
drivers/clk/clk-mux.c | 16 ++++++++++++++++
include/linux/clk-provider.h | 4 ++++
4 files changed, 52 insertions(+)
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -461,3 +461,19 @@ struct clk *clk_register_divider_table(s
width, clk_divider_flags, table, lock);
}
EXPORT_SYMBOL_GPL(clk_register_divider_table);
+
+void clk_unregister_divider(struct clk *clk)
+{
+ struct clk_divider *div;
+ struct clk_hw *hw;
+
+ hw = __clk_get_hw(clk);
+ if (!hw)
+ return;
+
+ div = to_clk_divider(hw);
+
+ clk_unregister(clk);
+ kfree(div);
+}
+EXPORT_SYMBOL_GPL(clk_unregister_divider);
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -162,3 +162,19 @@ struct clk *clk_register_gate(struct dev
return clk;
}
EXPORT_SYMBOL_GPL(clk_register_gate);
+
+void clk_unregister_gate(struct clk *clk)
+{
+ struct clk_gate *gate;
+ struct clk_hw *hw;
+
+ hw = __clk_get_hw(clk);
+ if (!hw)
+ return;
+
+ gate = to_clk_gate(hw);
+
+ clk_unregister(clk);
+ kfree(gate);
+}
+EXPORT_SYMBOL_GPL(clk_unregister_gate);
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -177,3 +177,19 @@ struct clk *clk_register_mux(struct devi
NULL, lock);
}
EXPORT_SYMBOL_GPL(clk_register_mux);
+
+void clk_unregister_mux(struct clk *clk)
+{
+ struct clk_mux *mux;
+ struct clk_hw *hw;
+
+ hw = __clk_get_hw(clk);
+ if (!hw)
+ return;
+
+ mux = to_clk_mux(hw);
+
+ clk_unregister(clk);
+ kfree(mux);
+}
+EXPORT_SYMBOL_GPL(clk_unregister_mux);
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -294,6 +294,7 @@ struct clk *clk_register_gate(struct dev
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
u8 clk_gate_flags, spinlock_t *lock);
+void clk_unregister_gate(struct clk *clk);
struct clk_div_table {
unsigned int val;
@@ -361,6 +362,7 @@ struct clk *clk_register_divider_table(s
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock);
+void clk_unregister_divider(struct clk *clk);
/**
* struct clk_mux - multiplexer clock
@@ -414,6 +416,8 @@ struct clk *clk_register_mux_table(struc
void __iomem *reg, u8 shift, u32 mask,
u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+void clk_unregister_mux(struct clk *clk);
+
void of_fixed_factor_clk_setup(struct device_node *node);
/**

144
target/linux/ipq806x/patches-3.18/133-ARM-Add-Krait-L2-register-accessor-functions.patch
View file

@ -1,144 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,01/13] ARM: Add Krait L2 register accessor functions
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063051
Message-Id: <1426920332-9340-2-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>,
Mark Rutland <mark.rutland@arm.com>, Russell King <linux@arm.linux.org.uk>,
Courtney Cavin <courtney.cavin@sonymobile.com>
Date: Fri, 20 Mar 2015 23:45:20 -0700
Krait CPUs have a handful of L2 cache controller registers that
live behind a cp15 based indirection register. First you program
the indirection register (l2cpselr) to point the L2 'window'
register (l2cpdr) at what you want to read/write. Then you
read/write the 'window' register to do what you want. The
l2cpselr register is not banked per-cpu so we must lock around
accesses to it to prevent other CPUs from re-pointing l2cpdr
underneath us.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/common/Kconfig | 3 ++
arch/arm/common/Makefile | 1 +
arch/arm/common/krait-l2-accessors.c | 58 +++++++++++++++++++++++++++++++
arch/arm/include/asm/krait-l2-accessors.h | 20 +++++++++++
4 files changed, 82 insertions(+)
create mode 100644 arch/arm/common/krait-l2-accessors.c
create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -9,6 +9,9 @@ config DMABOUNCE
bool
select ZONE_DMA
+config KRAIT_L2_ACCESSORS
+ bool
+
config SHARP_LOCOMO
bool
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -7,6 +7,7 @@ obj-y += firmware.o
obj-$(CONFIG_ICST) += icst.o
obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
+obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
--- /dev/null
+++ b/arch/arm/common/krait-l2-accessors.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/export.h>
+
+#include <asm/barrier.h>
+#include <asm/krait-l2-accessors.h>
+
+static DEFINE_RAW_SPINLOCK(krait_l2_lock);
+
+void krait_set_l2_indirect_reg(u32 addr, u32 val)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&krait_l2_lock, flags);
+ /*
+ * Select the L2 window by poking l2cpselr, then write to the window
+ * via l2cpdr.
+ */
+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
+ isb();
+ asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
+ isb();
+
+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
+}
+EXPORT_SYMBOL(krait_set_l2_indirect_reg);
+
+u32 krait_get_l2_indirect_reg(u32 addr)
+{
+ u32 val;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&krait_l2_lock, flags);
+ /*
+ * Select the L2 window by poking l2cpselr, then read from the window
+ * via l2cpdr.
+ */
+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
+ isb();
+ asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
+
+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
+
+ return val;
+}
+EXPORT_SYMBOL(krait_get_l2_indirect_reg);
--- /dev/null
+++ b/arch/arm/include/asm/krait-l2-accessors.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H
+#define __ASMARM_KRAIT_L2_ACCESSORS_H
+
+extern void krait_set_l2_indirect_reg(u32 addr, u32 val);
+extern u32 krait_get_l2_indirect_reg(u32 addr);
+
+#endif

192
target/linux/ipq806x/patches-3.18/134-clk-mux-Split-out-register-accessors-for-reuse.patch
View file

@ -1,192 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,02/13] clk: mux: Split out register accessors for reuse
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063111
Message-Id: <1426920332-9340-3-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 20 Mar 2015 23:45:21 -0700
We want to reuse the logic in clk-mux.c for other clock drivers
that don't use readl as register accessors. Fortunately, there
really isn't much to the mux code besides the table indirection
and quirk flags if you assume any bit shifting and masking has
been done already. Pull that logic out into reusable functions
that operate on an optional table and some flags so that other
drivers can use the same logic.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/clk-mux.c | 76 +++++++++++++++++++++++++++-----------------
include/linux/clk-provider.h | 9 ++++--
2 files changed, 54 insertions(+), 31 deletions(-)
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -29,35 +29,24 @@
#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
-static u8 clk_mux_get_parent(struct clk_hw *hw)
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+ unsigned int *table, unsigned long flags)
{
- struct clk_mux *mux = to_clk_mux(hw);
int num_parents = __clk_get_num_parents(hw->clk);
- u32 val;
- /*
- * FIXME need a mux-specific flag to determine if val is bitwise or numeric
- * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
- * to 0x7 (index starts at one)
- * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
- * val = 0x4 really means "bit 2, index starts at bit 0"
- */
- val = clk_readl(mux->reg) >> mux->shift;
- val &= mux->mask;
-
- if (mux->table) {
+ if (table) {
int i;
for (i = 0; i < num_parents; i++)
- if (mux->table[i] == val)
+ if (table[i] == val)
return i;
return -EINVAL;
}
- if (val && (mux->flags & CLK_MUX_INDEX_BIT))
+ if (val && (flags & CLK_MUX_INDEX_BIT))
val = ffs(val) - 1;
- if (val && (mux->flags & CLK_MUX_INDEX_ONE))
+ if (val && (flags & CLK_MUX_INDEX_ONE))
val--;
if (val >= num_parents)
@@ -65,24 +54,53 @@ static u8 clk_mux_get_parent(struct clk_
return val;
}
+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
-static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+static u8 _clk_mux_get_parent(struct clk_hw *hw)
{
struct clk_mux *mux = to_clk_mux(hw);
u32 val;
- unsigned long flags = 0;
- if (mux->table)
- index = mux->table[index];
+ /*
+ * FIXME need a mux-specific flag to determine if val is bitwise or numeric
+ * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
+ * to 0x7 (index starts at one)
+ * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
+ * val = 0x4 really means "bit 2, index starts at bit 0"
+ */
+ val = clk_readl(mux->reg) >> mux->shift;
+ val &= mux->mask;
+
+ return clk_mux_get_parent(hw, val, mux->table, mux->flags);
+}
- else {
- if (mux->flags & CLK_MUX_INDEX_BIT)
- index = 1 << index;
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+ unsigned long flags)
+{
+ unsigned int val = index;
- if (mux->flags & CLK_MUX_INDEX_ONE)
- index++;
+ if (table) {
+ val = table[val];
+ } else {
+ if (flags & CLK_MUX_INDEX_BIT)
+ val = 1 << index;
+
+ if (flags & CLK_MUX_INDEX_ONE)
+ val++;
}
+ return val;
+}
+EXPORT_SYMBOL_GPL(clk_mux_reindex);
+
+static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_mux *mux = to_clk_mux(hw);
+ u32 val;
+ unsigned long flags = 0;
+
+ index = clk_mux_reindex(index, mux->table, mux->flags);
+
if (mux->lock)
spin_lock_irqsave(mux->lock, flags);
@@ -102,21 +120,21 @@ static int clk_mux_set_parent(struct clk
}
const struct clk_ops clk_mux_ops = {
- .get_parent = clk_mux_get_parent,
+ .get_parent = _clk_mux_get_parent,
.set_parent = clk_mux_set_parent,
.determine_rate = __clk_mux_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_mux_ops);
const struct clk_ops clk_mux_ro_ops = {
- .get_parent = clk_mux_get_parent,
+ .get_parent = _clk_mux_get_parent,
};
EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
struct clk *clk_register_mux_table(struct device *dev, const char *name,
const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
- u8 clk_mux_flags, u32 *table, spinlock_t *lock)
+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
{
struct clk_mux *mux;
struct clk *clk;
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -390,7 +390,7 @@ void clk_unregister_divider(struct clk *
struct clk_mux {
struct clk_hw hw;
void __iomem *reg;
- u32 *table;
+ unsigned int *table;
u32 mask;
u8 shift;
u8 flags;
@@ -406,6 +406,11 @@ struct clk_mux {
extern const struct clk_ops clk_mux_ops;
extern const struct clk_ops clk_mux_ro_ops;
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+ unsigned int *table, unsigned long flags);
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+ unsigned long flags);
+
struct clk *clk_register_mux(struct device *dev, const char *name,
const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
@@ -414,7 +419,7 @@ struct clk *clk_register_mux(struct devi
struct clk *clk_register_mux_table(struct device *dev, const char *name,
const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
- u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
void clk_unregister_mux(struct clk *clk);

129
target/linux/ipq806x/patches-3.18/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch
View file

@ -1,129 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3, 03/13] clk: Avoid sending high rates to downstream clocks during
set_rate
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063271
Message-Id: <1426920332-9340-4-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 20 Mar 2015 23:45:22 -0700
If a clock is on and we call clk_set_rate() on it we may get into
a situation where the clock temporarily increases in rate
dramatically while we walk the tree and call .set_rate() ops. For
example, consider a case where a PLL feeds into a divider.
Initially the divider is set to divide by 1 and the PLL is
running fairly slow (100MHz). The downstream consumer of the
divider output can only handle rates =< 400 MHz, but the divider
can only choose between divisors of 1 and 4.
+-----+ +----------------+
| PLL |-->| div 1 or div 4 |---> consumer device
+-----+ +----------------+
To achieve a rate of 400MHz on the output of the divider, we
would have to set the rate of the PLL to 1.6 GHz and then divide
it by 4. The current code would set the PLL to 1.6GHz first while
the divider is still set to 1, thus causing the downstream
consumer of the clock to receive a few clock cycles of 1.6GHz
clock (far beyond it's maximum acceptable rate). We should be
changing the divider first before increasing the PLL rate to
avoid this problem.
Therefore, set the rate of any child clocks that are increasing
in rate from their current rate so that they can increase their
dividers if necessary. We assume that there isn't such a thing as
minimum rate requirements.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/clk.c | 34 ++++++++++++++++++++++------------
1 file changed, 22 insertions(+), 12 deletions(-)
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1476,21 +1476,23 @@ static struct clk *clk_propagate_rate_ch
* walk down a subtree and set the new rates notifying the rate
* change on the way
*/
-static void clk_change_rate(struct clk *clk)
+static void clk_change_rate(struct clk *clk, unsigned long best_parent_rate)
{
struct clk *child;
struct hlist_node *tmp;
unsigned long old_rate;
- unsigned long best_parent_rate = 0;
bool skip_set_rate = false;
struct clk *old_parent;
- old_rate = clk->rate;
+ hlist_for_each_entry(child, &clk->children, child_node) {
+ /* Skip children who will be reparented to another clock */
+ if (child->new_parent && child->new_parent != clk)
+ continue;
+ if (child->new_rate > child->rate)
+ clk_change_rate(child, clk->new_rate);
+ }
- if (clk->new_parent)
- best_parent_rate = clk->new_parent->rate;
- else if (clk->parent)
- best_parent_rate = clk->parent->rate;
+ old_rate = clk->rate;
if (clk->new_parent && clk->new_parent != clk->parent) {
old_parent = __clk_set_parent_before(clk, clk->new_parent);
@@ -1510,7 +1512,7 @@ static void clk_change_rate(struct clk *
if (!skip_set_rate && clk->ops->set_rate)
clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
- clk->rate = clk_recalc(clk, best_parent_rate);
+ clk->rate = clk->new_rate;
if (clk->notifier_count && old_rate != clk->rate)
__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
@@ -1523,12 +1525,13 @@ static void clk_change_rate(struct clk *
/* Skip children who will be reparented to another clock */
if (child->new_parent && child->new_parent != clk)
continue;
- clk_change_rate(child);
+ if (child->new_rate != child->rate)
+ clk_change_rate(child, clk->new_rate);
}
/* handle the new child who might not be in clk->children yet */
- if (clk->new_child)
- clk_change_rate(clk->new_child);
+ if (clk->new_child && clk->new_child->new_rate != clk->new_child->rate)
+ clk_change_rate(clk->new_child, clk->new_rate);
}
/**
@@ -1556,6 +1559,7 @@ int clk_set_rate(struct clk *clk, unsign
{
struct clk *top, *fail_clk;
int ret = 0;
+ unsigned long parent_rate;
if (!clk)
return 0;
@@ -1589,8 +1593,13 @@ int clk_set_rate(struct clk *clk, unsign
goto out;
}
+ if (top->parent)
+ parent_rate = top->parent->rate;
+ else
+ parent_rate = 0;
+
/* change the rates */
- clk_change_rate(top);
+ clk_change_rate(top, parent_rate);
out:
clk_prepare_unlock();

170
target/linux/ipq806x/patches-3.18/136-clk-Add-safe-switch-hook.patch
View file

@ -1,170 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,04/13] clk: Add safe switch hook
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063211
Message-Id: <1426920332-9340-5-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 20 Mar 2015 23:45:23 -0700
Sometimes clocks can't accept their parent source turning off
while the source is reprogrammed to a different rate. Most
notably CPU clocks require a way to switch away from the current
PLL they're running on, reprogram that PLL to a new rate, and
then switch back to the PLL with the new rate once they're done.
Add a hook that drivers can implement allowing them to return a
'safe parent' that they can switch their parent to while the
upstream source is reprogrammed to support this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
This patch is good enough for Krait, but soon I'll need to
support a "safe rate" where we ask a clock what rate it needs to be running
at to be sure it's within voltage constraints. Right now safe parent
handles that problem on Krait, but on other platforms it won't work.
drivers/clk/clk.c | 61 ++++++++++++++++++++++++++++++++++++++------
include/linux/clk-provider.h | 1 +
2 files changed, 54 insertions(+), 8 deletions(-)
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1350,7 +1350,8 @@ out:
static void clk_calc_subtree(struct clk *clk, unsigned long new_rate,
struct clk *new_parent, u8 p_index)
{
- struct clk *child;
+ struct clk *child, *parent;
+ struct clk_hw *parent_hw;
clk->new_rate = new_rate;
clk->new_parent = new_parent;
@@ -1360,6 +1361,18 @@ static void clk_calc_subtree(struct clk
if (new_parent && new_parent != clk->parent)
new_parent->new_child = clk;
+ if (clk->ops->get_safe_parent) {
+ parent_hw = clk->ops->get_safe_parent(clk->hw);
+ if (parent_hw) {
+ parent = parent_hw->clk;
+ p_index = clk_fetch_parent_index(clk, parent);
+ clk->safe_parent_index = p_index;
+ clk->safe_parent = parent;
+ }
+ } else {
+ clk->safe_parent = NULL;
+ }
+
hlist_for_each_entry(child, &clk->children, child_node) {
child->new_rate = clk_recalc(child, new_rate);
clk_calc_subtree(child, child->new_rate, NULL, 0);
@@ -1439,17 +1452,47 @@ out:
* so that in case of an error we can walk down the whole tree again and
* abort the change.
*/
-static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long event)
+static struct clk *clk_propagate_rate_change(struct clk *clk,
+ unsigned long event)
{
struct clk *child, *tmp_clk, *fail_clk = NULL;
+ struct clk *old_parent;
int ret = NOTIFY_DONE;
- if (clk->rate == clk->new_rate)
+ if (clk->rate == clk->new_rate && event != POST_RATE_CHANGE)
return NULL;
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ if (clk->safe_parent)
+ clk->ops->set_parent(clk->hw, clk->safe_parent_index);
+ clk->old_rate = clk->rate;
+ break;
+ case POST_RATE_CHANGE:
+ if (clk->safe_parent) {
+ old_parent = __clk_set_parent_before(clk,
+ clk->new_parent);
+ if (clk->ops->set_rate_and_parent) {
+ clk->ops->set_rate_and_parent(clk->hw,
+ clk->new_rate,
+ clk->new_parent ?
+ clk->new_parent->rate : 0,
+ clk->new_parent_index);
+ } else if (clk->ops->set_parent) {
+ clk->ops->set_parent(clk->hw,
+ clk->new_parent_index);
+ }
+ __clk_set_parent_after(clk, clk->new_parent,
+ old_parent);
+ }
+ break;
+ }
+
if (clk->notifier_count) {
- ret = __clk_notify(clk, event, clk->rate, clk->new_rate);
- if (ret & NOTIFY_STOP_MASK)
+ if (event != POST_RATE_CHANGE || clk->old_rate != clk->rate)
+ ret = __clk_notify(clk, event, clk->old_rate,
+ clk->new_rate);
+ if (ret & NOTIFY_STOP_MASK && event != POST_RATE_CHANGE)
fail_clk = clk;
}
@@ -1494,7 +1537,8 @@ static void clk_change_rate(struct clk *
old_rate = clk->rate;
- if (clk->new_parent && clk->new_parent != clk->parent) {
+ if (clk->new_parent && clk->new_parent != clk->parent &&
+ !clk->safe_parent) {
old_parent = __clk_set_parent_before(clk, clk->new_parent);
if (clk->ops->set_rate_and_parent) {
@@ -1514,9 +1558,6 @@ static void clk_change_rate(struct clk *
clk->rate = clk->new_rate;
- if (clk->notifier_count && old_rate != clk->rate)
- __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
-
/*
* Use safe iteration, as change_rate can actually swap parents
* for certain clock types.
@@ -1601,6 +1642,8 @@ int clk_set_rate(struct clk *clk, unsign
/* change the rates */
clk_change_rate(top, parent_rate);
+ clk_propagate_rate_change(top, POST_RATE_CHANGE);
+
out:
clk_prepare_unlock();
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -179,6 +179,7 @@ struct clk_ops {
struct clk **best_parent_clk);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
+ struct clk_hw *(*get_safe_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
int (*set_rate_and_parent)(struct clk_hw *hw,
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -38,8 +38,11 @@ struct clk {
struct clk **parents;
u8 num_parents;
u8 new_parent_index;
+ u8 safe_parent_index;
unsigned long rate;
+ unsigned long old_rate;
unsigned long new_rate;
+ struct clk *safe_parent;
struct clk *new_parent;
struct clk *new_child;
unsigned long flags;

351
target/linux/ipq806x/patches-3.18/137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
View file

@ -1,351 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,05/13] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063261
Message-Id: <1426920332-9340-6-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 20 Mar 2015 23:45:24 -0700
HFPLLs are the main frequency source for Krait CPU clocks. Add
support for changing the rate of these PLLs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
I'd really like to get rid of __clk_hfpll_init_once() if possible...
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-hfpll.c | 253 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-hfpll.h | 54 +++++++++
3 files changed, 308 insertions(+)
create mode 100644 drivers/clk/qcom/clk-hfpll.c
create mode 100644 drivers/clk/qcom/clk-hfpll.h
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -6,6 +6,7 @@ clk-qcom-y += clk-pll.o
clk-qcom-y += clk-rcg.o
clk-qcom-y += clk-rcg2.o
clk-qcom-y += clk-branch.o
+clk-qcom-y += clk-hfpll.o
clk-qcom-y += reset.o
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+#define PLL_OUTCTRL BIT(0)
+#define PLL_BYPASSNL BIT(1)
+#define PLL_RESET_N BIT(2)
+
+/* Initialize a HFPLL at a given rate and enable it. */
+static void __clk_hfpll_init_once(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+
+ if (likely(h->init_done))
+ return;
+
+ /* Configure PLL parameters for integer mode. */
+ if (hd->config_val)
+ regmap_write(regmap, hd->config_reg, hd->config_val);
+ regmap_write(regmap, hd->m_reg, 0);
+ regmap_write(regmap, hd->n_reg, 1);
+
+ if (hd->user_reg) {
+ u32 regval = hd->user_val;
+ unsigned long rate;
+
+ rate = __clk_get_rate(hw->clk);
+
+ /* Pick the right VCO. */
+ if (hd->user_vco_mask && rate > hd->low_vco_max_rate)
+ regval |= hd->user_vco_mask;
+ regmap_write(regmap, hd->user_reg, regval);
+ }
+
+ if (hd->droop_reg)
+ regmap_write(regmap, hd->droop_reg, hd->droop_val);
+
+ h->init_done = true;
+}
+
+static void __clk_hfpll_enable(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 val;
+
+ __clk_hfpll_init_once(hw);
+
+ /* Disable PLL bypass mode. */
+ regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL);
+
+ /*
+ * H/W requires a 5us delay between disabling the bypass and
+ * de-asserting the reset. Delay 10us just to be safe.
+ */
+ udelay(10);
+
+ /* De-assert active-low PLL reset. */
+ regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
+
+ /* Wait for PLL to lock. */
+ if (hd->status_reg) {
+ do {
+ regmap_read(regmap, hd->status_reg, &val);
+ } while (!(val & BIT(hd->lock_bit)));
+ } else {
+ udelay(60);
+ }
+
+ /* Enable PLL output. */
+ regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL);
+}
+
+/* Enable an already-configured HFPLL. */
+static int clk_hfpll_enable(struct clk_hw *hw)
+{
+ unsigned long flags;
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 mode;
+
+ spin_lock_irqsave(&h->lock, flags);
+ regmap_read(regmap, hd->mode_reg, &mode);
+ if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)))
+ __clk_hfpll_enable(hw);
+ spin_unlock_irqrestore(&h->lock, flags);
+
+ return 0;
+}
+
+static void __clk_hfpll_disable(struct clk_hfpll *h)
+{
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+
+ /*
+ * Disable the PLL output, disable test mode, enable the bypass mode,
+ * and assert the reset.
+ */
+ regmap_update_bits(regmap, hd->mode_reg,
+ PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0);
+}
+
+static void clk_hfpll_disable(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ unsigned long flags;
+
+ spin_lock_irqsave(&h->lock, flags);
+ __clk_hfpll_disable(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
+static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ unsigned long rrate;
+
+ rate = clamp(rate, hd->min_rate, hd->max_rate);
+
+ rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate;
+ if (rrate > hd->max_rate)
+ rrate -= *parent_rate;
+
+ return rrate;
+}
+
+/*
+ * For optimization reasons, assumes no downstream clocks are actively using
+ * it.
+ */
+static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ unsigned long flags;
+ u32 l_val, val;
+ bool enabled;
+
+ l_val = rate / parent_rate;
+
+ spin_lock_irqsave(&h->lock, flags);
+
+ enabled = __clk_is_enabled(hw->clk);
+ if (enabled)
+ __clk_hfpll_disable(h);
+
+ /* Pick the right VCO. */
+ if (hd->user_reg && hd->user_vco_mask) {
+ regmap_read(regmap, hd->user_reg, &val);
+ if (rate <= hd->low_vco_max_rate)
+ val &= ~hd->user_vco_mask;
+ else
+ val |= hd->user_vco_mask;
+ regmap_write(regmap, hd->user_reg, val);
+ }
+
+ regmap_write(regmap, hd->l_reg, l_val);
+
+ if (enabled)
+ __clk_hfpll_enable(hw);
+
+ spin_unlock_irqrestore(&h->lock, flags);
+
+ return 0;
+}
+
+static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 l_val;
+
+ regmap_read(regmap, hd->l_reg, &l_val);
+
+ return l_val * parent_rate;
+}
+
+static void clk_hfpll_init(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 mode, status;
+
+ regmap_read(regmap, hd->mode_reg, &mode);
+ if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) {
+ __clk_hfpll_init_once(hw);
+ return;
+ }
+
+ if (hd->status_reg) {
+ regmap_read(regmap, hd->status_reg, &status);
+ if (!(status & BIT(hd->lock_bit))) {
+ WARN(1, "HFPLL %s is ON, but not locked!\n",
+ __clk_get_name(hw->clk));
+ clk_hfpll_disable(hw);
+ __clk_hfpll_init_once(hw);
+ }
+ }
+}
+
+static int hfpll_is_enabled(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 mode;
+
+ regmap_read(regmap, hd->mode_reg, &mode);
+ mode &= 0x7;
+ return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL);
+}
+
+const struct clk_ops clk_ops_hfpll = {
+ .enable = clk_hfpll_enable,
+ .disable = clk_hfpll_disable,
+ .is_enabled = hfpll_is_enabled,
+ .round_rate = clk_hfpll_round_rate,
+ .set_rate = clk_hfpll_set_rate,
+ .recalc_rate = clk_hfpll_recalc_rate,
+ .init = clk_hfpll_init,
+};
+EXPORT_SYMBOL_GPL(clk_ops_hfpll);
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_CLK_HFPLL_H__
+#define __QCOM_CLK_HFPLL_H__
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include "clk-regmap.h"
+
+struct hfpll_data {
+ u32 mode_reg;
+ u32 l_reg;
+ u32 m_reg;
+ u32 n_reg;
+ u32 user_reg;
+ u32 droop_reg;
+ u32 config_reg;
+ u32 status_reg;
+ u8 lock_bit;
+
+ u32 droop_val;
+ u32 config_val;
+ u32 user_val;
+ u32 user_vco_mask;
+ unsigned long low_vco_max_rate;
+
+ unsigned long min_rate;
+ unsigned long max_rate;
+};
+
+struct clk_hfpll {
+ struct hfpll_data const *d;
+ int init_done;
+
+ struct clk_regmap clkr;
+ spinlock_t lock;
+};
+
+#define to_clk_hfpll(_hw) \
+ container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr)
+
+extern const struct clk_ops clk_ops_hfpll;
+
+#endif

206
target/linux/ipq806x/patches-3.18/138-clk-qcom-Add-HFPLL-driver.patch
View file

@ -1,206 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,06/13] clk: qcom: Add HFPLL driver
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063231
Message-Id: <1426920332-9340-7-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
Date: Fri, 20 Mar 2015 23:45:25 -0700
On some devices (MSM8974 for example), the HFPLLs are
instantiated within the Krait processor subsystem as separate
register regions. Add a driver for these PLLs so that we can
provide HFPLL clocks for use by the system.
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
.../devicetree/bindings/clock/qcom,hfpll.txt | 40 ++++++++
drivers/clk/qcom/Kconfig | 8 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/hfpll.c | 109 +++++++++++++++++++++
4 files changed, 158 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt
create mode 100644 drivers/clk/qcom/hfpll.c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
@@ -0,0 +1,40 @@
+High-Frequency PLL (HFPLL)
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,hfpll"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: address and size of HPLL registers. An optional second
+ element specifies the address and size of the alias
+ register region.
+
+- clock-output-names:
+ Usage: required
+ Value type: <string>
+ Definition: Name of the PLL. Typically hfpllX where X is a CPU number
+ starting at 0. Otherwise hfpll_Y where Y is more specific
+ such as "l2".
+
+Example:
+
+1) An HFPLL for the L2 cache.
+
+ clock-controller@f9016000 {
+ compatible = "qcom,hfpll";
+ reg = <0xf9016000 0x30>;
+ clock-output-names = "hfpll_l2";
+ };
+
+2) An HFPLL for CPU0. This HFPLL has the alias register region.
+
+ clock-controller@f908a000 {
+ compatible = "qcom,hfpll";
+ reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
+ clock-output-names = "hfpll0";
+ };
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -70,3 +70,11 @@ config MSM_MMCC_8974
Support for the multimedia clock controller on msm8974 devices.
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
+
+config QCOM_HFPLL
+ tristate "High-Frequency PLL (HFPLL) Clock Controller"
+ depends on COMMON_CLK_QCOM
+ help
+ Support for the high-frequency PLLs present on Qualcomm devices.
+ Say Y if you want to support CPU frequency scaling on devices
+ such as MSM8974, APQ8084, etc.
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_MSM_GCC_8960) += gcc-msm896
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
--- /dev/null
+++ b/drivers/clk/qcom/hfpll.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+static const struct hfpll_data hdata = {
+ .mode_reg = 0x00,
+ .l_reg = 0x04,
+ .m_reg = 0x08,
+ .n_reg = 0x0c,
+ .user_reg = 0x10,
+ .config_reg = 0x14,
+ .config_val = 0x430405d,
+ .status_reg = 0x1c,
+ .lock_bit = 16,
+
+ .user_val = 0x8,
+ .user_vco_mask = 0x100000,
+ .low_vco_max_rate = 1248000000,
+ .min_rate = 537600000UL,
+ .max_rate = 2900000000UL,
+};
+
+static const struct of_device_id qcom_hfpll_match_table[] = {
+ { .compatible = "qcom,hfpll" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
+
+static const struct regmap_config hfpll_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x30,
+ .fast_io = true,
+};
+
+static int qcom_hfpll_probe(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ void __iomem *base;
+ struct regmap *regmap;
+ struct clk_hfpll *h;
+ struct clk_init_data init = {
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_ops_hfpll,
+ };
+
+ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
+ if (!h)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ if (of_property_read_string_index(dev->of_node, "clock-output-names",
+ 0, &init.name))
+ return -ENODEV;
+
+ h->d = &hdata;
+ h->clkr.hw.init = &init;
+ spin_lock_init(&h->lock);
+
+ clk = devm_clk_register_regmap(&pdev->dev, &h->clkr);
+
+ return PTR_ERR_OR_ZERO(clk);
+}
+
+static struct platform_driver qcom_hfpll_driver = {
+ .probe = qcom_hfpll_probe,
+ .driver = {
+ .name = "qcom-hfpll",
+ .of_match_table = qcom_hfpll_match_table,
+ },
+};
+module_platform_driver(qcom_hfpll_driver);
+
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-hfpll");

127
target/linux/ipq806x/patches-3.18/139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
View file

@ -1,127 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,08/13] clk: qcom: Add IPQ806X's HFPLLs
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063241
Message-Id: <1426920332-9340-9-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 20 Mar 2015 23:45:27 -0700
Describe the HFPLLs present on IPQ806X devices.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-ipq806x.c | 83 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -30,6 +30,7 @@
#include "clk-pll.h"
#include "clk-rcg.h"
#include "clk-branch.h"
+#include "clk-hfpll.h"
#include "reset.h"
static struct clk_pll pll0 = {
@@ -102,6 +103,85 @@ static struct clk_regmap pll8_vote = {
},
};
+static struct hfpll_data hfpll0_data = {
+ .mode_reg = 0x3200,
+ .l_reg = 0x3208,
+ .m_reg = 0x320c,
+ .n_reg = 0x3210,
+ .config_reg = 0x3204,
+ .status_reg = 0x321c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3214,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll0 = {
+ .d = &hfpll0_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll0",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
+};
+
+static struct hfpll_data hfpll1_data = {
+ .mode_reg = 0x3240,
+ .l_reg = 0x3248,
+ .m_reg = 0x324c,
+ .n_reg = 0x3250,
+ .config_reg = 0x3244,
+ .status_reg = 0x325c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3314,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll1 = {
+ .d = &hfpll1_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll1",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
+};
+
+static struct hfpll_data hfpll_l2_data = {
+ .mode_reg = 0x3300,
+ .l_reg = 0x3308,
+ .m_reg = 0x330c,
+ .n_reg = 0x3310,
+ .config_reg = 0x3304,
+ .status_reg = 0x331c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3314,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll_l2 = {
+ .d = &hfpll_l2_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll_l2",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
+};
+
+
static struct clk_pll pll14 = {
.l_reg = 0x31c4,
.m_reg = 0x31c8,
@@ -2261,6 +2341,9 @@ static struct clk_regmap *gcc_ipq806x_cl
[USB_FS1_XCVR_SRC] = &usb_fs1_xcvr_clk_src.clkr,
[USB_FS1_XCVR_CLK] = &usb_fs1_xcvr_clk.clkr,
[USB_FS1_SYSTEM_CLK] = &usb_fs1_sys_clk.clkr,
+ [PLL9] = &hfpll0.clkr,
+ [PLL10] = &hfpll1.clkr,
+ [PLL12] = &hfpll_l2.clkr,
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {

271
target/linux/ipq806x/patches-3.18/140-clk-qcom-Add-support-for-Krait-clocks.patch
View file

@ -1,271 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,09/13] clk: qcom: Add support for Krait clocks
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063251
Message-Id: <1426920332-9340-10-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 20 Mar 2015 23:45:28 -0700
The Krait clocks are made up of a series of muxes and a divider
that choose between a fixed rate clock and dedicated HFPLLs for
each CPU. Instead of using mmio accesses to remux parents, the
Krait implementation exposes the remux control via cp15
registers. Support these clocks.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 4 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-krait.c | 166 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-krait.h | 49 +++++++++++++
4 files changed, 220 insertions(+)
create mode 100644 drivers/clk/qcom/clk-krait.c
create mode 100644 drivers/clk/qcom/clk-krait.h
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -78,3 +78,7 @@ config QCOM_HFPLL
Support for the high-frequency PLLs present on Qualcomm devices.
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
+
+config KRAIT_CLOCKS
+ bool
+ select KRAIT_L2_ACCESSORS
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -6,6 +6,7 @@ clk-qcom-y += clk-pll.o
clk-qcom-y += clk-rcg.o
clk-qcom-y += clk-rcg2.o
clk-qcom-y += clk-branch.o
+clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
clk-qcom-y += clk-hfpll.o
clk-qcom-y += reset.o
--- /dev/null
+++ b/drivers/clk/qcom/clk-krait.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#include <asm/krait-l2-accessors.h>
+
+#include "clk-krait.h"
+
+/* Secondary and primary muxes share the same cp15 register */
+static DEFINE_SPINLOCK(krait_clock_reg_lock);
+
+#define LPL_SHIFT 8
+static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel)
+{
+ unsigned long flags;
+ u32 regval;
+
+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
+ regval = krait_get_l2_indirect_reg(mux->offset);
+ regval &= ~(mux->mask << mux->shift);
+ regval |= (sel & mux->mask) << mux->shift;
+ if (mux->lpl) {
+ regval &= ~(mux->mask << (mux->shift + LPL_SHIFT));
+ regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT);
+ }
+ krait_set_l2_indirect_reg(mux->offset, regval);
+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
+
+ /* Wait for switch to complete. */
+ mb();
+ udelay(1);
+}
+
+static int krait_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
+ u32 sel;
+
+ sel = clk_mux_reindex(index, mux->parent_map, 0);
+ mux->en_mask = sel;
+ /* Don't touch mux if CPU is off as it won't work */
+ if (__clk_is_enabled(hw->clk))
+ __krait_mux_set_sel(mux, sel);
+ return 0;
+}
+
+static u8 krait_mux_get_parent(struct clk_hw *hw)
+{
+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
+ u32 sel;
+
+ sel = krait_get_l2_indirect_reg(mux->offset);
+ sel >>= mux->shift;
+ sel &= mux->mask;
+ mux->en_mask = sel;
+
+ return clk_mux_get_parent(hw, sel, mux->parent_map, 0);
+}
+
+static struct clk_hw *krait_mux_get_safe_parent(struct clk_hw *hw)
+{
+ int i;
+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
+ int num_parents = __clk_get_num_parents(hw->clk);
+
+ i = mux->safe_sel;
+ for (i = 0; i < num_parents; i++)
+ if (mux->safe_sel == mux->parent_map[i])
+ break;
+
+ return __clk_get_hw(clk_get_parent_by_index(hw->clk, i));
+}
+
+static int krait_mux_enable(struct clk_hw *hw)
+{
+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
+
+ __krait_mux_set_sel(mux, mux->en_mask);
+
+ return 0;
+}
+
+static void krait_mux_disable(struct clk_hw *hw)
+{
+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
+
+ __krait_mux_set_sel(mux, mux->safe_sel);
+}
+
+const struct clk_ops krait_mux_clk_ops = {
+ .enable = krait_mux_enable,
+ .disable = krait_mux_disable,
+ .set_parent = krait_mux_set_parent,
+ .get_parent = krait_mux_get_parent,
+ .determine_rate = __clk_mux_determine_rate_closest,
+ .get_safe_parent = krait_mux_get_safe_parent,
+};
+EXPORT_SYMBOL_GPL(krait_mux_clk_ops);
+
+/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */
+static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ *parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), rate * 2);
+ return DIV_ROUND_UP(*parent_rate, 2);
+}
+
+static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
+ unsigned long flags;
+ u32 val;
+ u32 mask = BIT(d->width) - 1;
+
+ if (d->lpl)
+ mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift;
+
+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
+ val = krait_get_l2_indirect_reg(d->offset);
+ val &= ~mask;
+ krait_set_l2_indirect_reg(d->offset, val);
+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
+
+ return 0;
+}
+
+static unsigned long
+krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
+ u32 mask = BIT(d->width) - 1;
+ u32 div;
+
+ div = krait_get_l2_indirect_reg(d->offset);
+ div >>= d->shift;
+ div &= mask;
+ div = (div + 1) * 2;
+
+ return DIV_ROUND_UP(parent_rate, div);
+}
+
+const struct clk_ops krait_div2_clk_ops = {
+ .round_rate = krait_div2_round_rate,
+ .set_rate = krait_div2_set_rate,
+ .recalc_rate = krait_div2_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(krait_div2_clk_ops);
--- /dev/null
+++ b/drivers/clk/qcom/clk-krait.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_KRAIT_H
+#define __QCOM_CLK_KRAIT_H
+
+#include <linux/clk-provider.h>
+
+struct krait_mux_clk {
+ unsigned int *parent_map;
+ bool has_safe_parent;
+ u8 safe_sel;
+ u32 offset;
+ u32 mask;
+ u32 shift;
+ u32 en_mask;
+ bool lpl;
+
+ struct clk_hw hw;
+};
+
+#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw)
+
+extern const struct clk_ops krait_mux_clk_ops;
+
+struct krait_div2_clk {
+ u32 offset;
+ u8 width;
+ u32 shift;
+ bool lpl;
+
+ struct clk_hw hw;
+};
+
+#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw)
+
+extern const struct clk_ops krait_div2_clk_ops;
+
+#endif

304
target/linux/ipq806x/patches-3.18/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
View file

@ -1,304 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,12/13] cpufreq: Add module to register cpufreq on Krait CPUs
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063191
Message-Id: <1426920332-9340-13-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
Date: Fri, 20 Mar 2015 23:45:31 -0700
Register a cpufreq-generic device whenever we detect that a
"qcom,krait" compatible CPU is present in DT.
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
.../devicetree/bindings/arm/msm/qcom,pvs.txt | 38 ++++
drivers/cpufreq/Kconfig.arm | 9 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/qcom-cpufreq.c | 204 +++++++++++++++++++++
4 files changed, 252 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
create mode 100644 drivers/cpufreq/qcom-cpufreq.c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
@@ -0,0 +1,38 @@
+Qualcomm Process Voltage Scaling Tables
+
+The node name is required to be "qcom,pvs". There shall only be one
+such node present in the root of the tree.
+
+PROPERTIES
+
+- qcom,pvs-format-a or qcom,pvs-format-b:
+ Usage: required
+ Value type: <empty>
+ Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties.
+ If qcom,pvs-format-a is used the table is two columns
+ (frequency and voltage in that order). If qcom,pvs-format-b is used the table is three columns (frequency, voltage,
+ and current in that order).
+
+- qcom,speedX-pvsY-bin-vZ:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: The PVS table corresponding to the speed bin X, pvs bin Y,
+ and version Z.
+Example:
+
+ qcom,pvs {
+ qcom,pvs-format-a;
+ qcom,speed0-pvs0-bin-v0 =
+ < 384000000 950000 >,
+ < 486000000 975000 >,
+ < 594000000 1000000 >,
+ < 702000000 1025000 >,
+ < 810000000 1075000 >,
+ < 918000000 1100000 >,
+ < 1026000000 1125000 >,
+ < 1134000000 1175000 >,
+ < 1242000000 1200000 >,
+ < 1350000000 1225000 >,
+ < 1458000000 1237500 >,
+ < 1512000000 1250000 >;
+ };
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -129,6 +129,15 @@ config ARM_OMAP2PLUS_CPUFREQ
depends on ARCH_OMAP2PLUS
default ARCH_OMAP2PLUS
+config ARM_QCOM_CPUFREQ
+ tristate "Qualcomm based"
+ depends on ARCH_QCOM
+ select PM_OPP
+ help
+ This adds the CPUFreq driver for Qualcomm SoC based boards.
+
+ If in doubt, say N.
+
config ARM_S3C_CPUFREQ
bool
help
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += o
obj-$(CONFIG_PXA25x) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA27x) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
--- /dev/null
+++ b/drivers/cpufreq/qcom-cpufreq.c
@@ -0,0 +1,204 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/cpufreq-dt.h>
+
+static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver)
+{
+ void __iomem *base;
+ u32 pte_efuse;
+
+ *speed = *pvs = *pvs_ver = 0;
+
+ base = ioremap(0x007000c0, 4);
+ if (!base) {
+ pr_warn("Unable to read efuse data. Defaulting to 0!\n");
+ return;
+ }
+
+ pte_efuse = readl_relaxed(base);
+ iounmap(base);
+
+ *speed = pte_efuse & 0xf;
+ if (*speed == 0xf)
+ *speed = (pte_efuse >> 4) & 0xf;
+
+ if (*speed == 0xf) {
+ *speed = 0;
+ pr_warn("Speed bin: Defaulting to %d\n", *speed);
+ } else {
+ pr_info("Speed bin: %d\n", *speed);
+ }
+
+ *pvs = (pte_efuse >> 10) & 0x7;
+ if (*pvs == 0x7)
+ *pvs = (pte_efuse >> 13) & 0x7;
+
+ if (*pvs == 0x7) {
+ *pvs = 0;
+ pr_warn("PVS bin: Defaulting to %d\n", *pvs);
+ } else {
+ pr_info("PVS bin: %d\n", *pvs);
+ }
+}
+
+static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver)
+{
+ u32 pte_efuse, redundant_sel;
+ void __iomem *base;
+
+ *speed = 0;
+ *pvs = 0;
+ *pvs_ver = 0;
+
+ base = ioremap(0xfc4b80b0, 8);
+ if (!base) {
+ pr_warn("Unable to read efuse data. Defaulting to 0!\n");
+ return;
+ }
+
+ pte_efuse = readl_relaxed(base);
+ redundant_sel = (pte_efuse >> 24) & 0x7;
+ *speed = pte_efuse & 0x7;
+ /* 4 bits of PVS are in efuse register bits 31, 8-6. */
+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
+ *pvs_ver = (pte_efuse >> 4) & 0x3;
+
+ switch (redundant_sel) {
+ case 1:
+ *speed = (pte_efuse >> 27) & 0xf;
+ break;
+ case 2:
+ *pvs = (pte_efuse >> 27) & 0xf;
+ break;
+ }
+
+ /* Check SPEED_BIN_BLOW_STATUS */
+ if (pte_efuse & BIT(3)) {
+ pr_info("Speed bin: %d\n", *speed);
+ } else {
+ pr_warn("Speed bin not set. Defaulting to 0!\n");
+ *speed = 0;
+ }
+
+ /* Check PVS_BLOW_STATUS */
+ pte_efuse = readl_relaxed(base + 0x4) & BIT(21);
+ if (pte_efuse) {
+ pr_info("PVS bin: %d\n", *pvs);
+ } else {
+ pr_warn("PVS bin not set. Defaulting to 0!\n");
+ *pvs = 0;
+ }
+
+ pr_info("PVS version: %d\n", *pvs_ver);
+ iounmap(base);
+}
+
+static int __init qcom_cpufreq_populate_opps(void)
+{
+ int len, rows, cols, i, k, speed, pvs, pvs_ver;
+ char table_name[] = "qcom,speedXX-pvsXX-bin-vXX";
+ struct device_node *np;
+ struct device *dev;
+ int cpu = 0;
+
+ np = of_find_node_by_name(NULL, "qcom,pvs");
+ if (!np)
+ return -ENODEV;
+
+ if (of_property_read_bool(np, "qcom,pvs-format-a")) {
+ get_krait_bin_format_a(&speed, &pvs, &pvs_ver);
+ cols = 2;
+ } else if (of_property_read_bool(np, "qcom,pvs-format-b")) {
+ get_krait_bin_format_b(&speed, &pvs, &pvs_ver);
+ cols = 3;
+ } else {
+ return -ENODEV;
+ }
+
+ snprintf(table_name, sizeof(table_name),
+ "qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver);
+
+ if (!of_find_property(np, table_name, &len))
+ return -EINVAL;
+
+ len /= sizeof(u32);
+ if (len % cols || len == 0)
+ return -EINVAL;
+
+ rows = len / cols;
+
+ for (i = 0, k = 0; i < rows; i++) {
+ u32 freq, volt;
+
+ of_property_read_u32_index(np, table_name, k++, &freq);
+ of_property_read_u32_index(np, table_name, k++, &volt);
+ while (k % cols)
+ k++; /* Skip uA entries if present */
+ for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
+ dev = get_cpu_device(cpu);
+ if (!dev)
+ return -ENODEV;
+ if (dev_pm_opp_add(dev, freq, volt))
+ pr_warn("failed to add OPP %u\n", freq);
+ }
+ }
+
+ return 0;
+}
+
+static int __init qcom_cpufreq_driver_init(void)
+{
+ struct cpufreq_dt_platform_data pdata = { .independent_clocks = true };
+ struct platform_device_info devinfo = {
+ .name = "cpufreq-dt",
+ .data = &pdata,
+ .size_data = sizeof(pdata),
+ };
+ struct device *cpu_dev;
+ struct device_node *np;
+ int ret;
+
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev)
+ return -ENODEV;
+
+ np = of_node_get(cpu_dev->of_node);
+ if (!np)
+ return -ENOENT;
+
+ if (!of_device_is_compatible(np, "qcom,krait")) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+ of_node_put(np);
+
+ ret = qcom_cpufreq_populate_opps();
+ if (ret)
+ return ret;
+
+ return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo));
+}
+module_init(qcom_cpufreq_driver_init);
+
+MODULE_DESCRIPTION("Qualcomm CPUfreq driver");
+MODULE_LICENSE("GPL v2");

100
target/linux/ipq806x/patches-3.18/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
View file

@ -1,100 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -25,6 +25,11 @@
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
+ clocks = <&kraitcc 0>;
+ clock-names = "cpu";
+ clock-latency = <100000>;
+ core-supply = <&smb208_s2a>;
+ voltage-tolerance = <5>;
};
cpu@1 {
@@ -35,11 +40,24 @@
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
+ clocks = <&kraitcc 1>;
+ clock-names = "cpu";
+ clock-latency = <100000>;
+ core-supply = <&smb208_s2b>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
+ clocks = <&kraitcc 4>;
+ clock-names = "cache";
+ cache-points-kHz = <
+ /* kHz uV CPU kHz */
+ 1200000 1150000 1200000
+ 1000000 1100000 600000
+ 384000 1100000 384000
+ >;
+ vdd_dig-supply = <&smb208_s1a>;
};
};
@@ -72,6 +90,46 @@
};
};
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ #clock-cells = <1>;
+ };
+
+ qcom,pvs {
+ qcom,pvs-format-a;
+ qcom,speed0-pvs0-bin-v0 =
+ < 1400000000 1250000 >,
+ < 1200000000 1200000 >,
+ < 1000000000 1150000 >,
+ < 800000000 1100000 >,
+ < 600000000 1050000 >,
+ < 384000000 1000000 >;
+
+ qcom,speed0-pvs1-bin-v0 =
+ < 1400000000 1175000 >,
+ < 1200000000 1125000 >,
+ < 1000000000 1075000 >,
+ < 800000000 1025000 >,
+ < 600000000 975000 >,
+ < 384000000 925000 >;
+
+ qcom,speed0-pvs2-bin-v0 =
+ < 1400000000 1125000 >,
+ < 1200000000 1075000 >,
+ < 1000000000 1025000 >,
+ < 800000000 995000 >,
+ < 600000000 925000 >,
+ < 384000000 875000 >;
+
+ qcom,speed0-pvs3-bin-v0 =
+ < 1400000000 1050000 >,
+ < 1200000000 1000000 >,
+ < 1000000000 950000 >,
+ < 800000000 900000 >,
+ < 600000000 850000 >,
+ < 384000000 800000 >;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -199,11 +257,13 @@
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu0_aux";
};
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu1_aux";
};
l2cc: clock-controller@2011000 {

461
target/linux/ipq806x/patches-3.18/145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch
View file

@ -1,461 +0,0 @@
From dd77db4143290689d3a5e1ec61627233d0711b66 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 30 May 2014 16:36:11 -0700
Subject: [PATCH] FROMLIST: cpufreq: Add a cpufreq-krait based on cpufreq-cpu0
Krait processors have individual clocks for each CPU that can
scale independently from one another. cpufreq-cpu0 is fairly
close to this, but assumes that there is only one clock for all
CPUs. Add a driver to support the Krait configuration.
TODO: Merge into cpufreq-cpu0? Or make generic?
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/cpufreq/Kconfig | 13 +++
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/cpufreq-krait.c | 190 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 204 insertions(+)
create mode 100644 drivers/cpufreq/cpufreq-krait.c
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -196,6 +196,19 @@ config CPUFREQ_DT
If in doubt, say N.
+config GENERIC_CPUFREQ_KRAIT
+ tristate "Krait cpufreq driver"
+ depends on HAVE_CLK && OF
+ # if CPU_THERMAL is on and THERMAL=m, CPU0 cannot be =y:
+ depends on !CPU_THERMAL || THERMAL
+ select PM_OPP
+ help
+ This adds a generic cpufreq driver for CPU0 frequency management.
+ It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
+ systems which share clock and voltage across all CPUs.
+
+ If in doubt, say N.
+
menu "x86 CPU frequency scaling drivers"
depends on X86
source "drivers/cpufreq/Kconfig.x86"
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
+obj-$(CONFIG_GENERIC_CPUFREQ_KRAIT) += cpufreq-krait.o
##################################################################################
# x86 drivers.
--- /dev/null
+++ b/drivers/cpufreq/cpufreq-krait.c
@@ -0,0 +1,390 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * The OPP code in function krait_set_target() is reused from
+ * drivers/cpufreq/omap-cpufreq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpu_cooling.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+static unsigned int transition_latency;
+static unsigned int voltage_tolerance; /* in percentage */
+
+static struct device *cpu_dev;
+static DEFINE_PER_CPU(struct clk *, krait_cpu_clks);
+static DEFINE_PER_CPU(struct regulator *, krait_supply_core);
+static struct cpufreq_frequency_table *freq_table;
+static struct thermal_cooling_device *cdev;
+
+struct cache_points {
+ unsigned long cache_freq;
+ unsigned int cache_volt;
+ unsigned long cpu_freq;
+};
+
+static struct regulator *krait_l2_reg;
+static struct clk *krait_l2_clk;
+static struct cache_points *krait_l2_points;
+static int nr_krait_l2_points;
+
+static int krait_parse_cache_points(struct device *dev,
+ struct device_node *of_node)
+{
+ const struct property *prop;
+ const __be32 *val;
+ int nr, i;
+
+ prop = of_find_property(of_node, "cache-points-kHz", NULL);
+ if (!prop)
+ return -ENODEV;
+ if (!prop->value)
+ return -ENODATA;
+
+ /*
+ * Each OPP is a set of tuples consisting of frequency and
+ * cpu-frequency like <freq-kHz volt-uV freq-kHz>.
+ */
+ nr = prop->length / sizeof(u32);
+ if (nr % 3) {
+ dev_err(dev, "%s: Invalid cache points\n", __func__);
+ return -EINVAL;
+ }
+ nr /= 3;
+
+ krait_l2_points = devm_kcalloc(dev, nr, sizeof(*krait_l2_points),
+ GFP_KERNEL);
+ if (!krait_l2_points)
+ return -ENOMEM;
+ nr_krait_l2_points = nr;
+
+ for (i = 0, val = prop->value; i < nr; i++) {
+ unsigned long cache_freq = be32_to_cpup(val++) * 1000;
+ unsigned int cache_volt = be32_to_cpup(val++);
+ unsigned long cpu_freq = be32_to_cpup(val++) * 1000;
+
+ krait_l2_points[i].cache_freq = cache_freq;
+ krait_l2_points[i].cache_volt = cache_volt;
+ krait_l2_points[i].cpu_freq = cpu_freq;
+ }
+
+ return 0;
+}
+
+static int krait_set_target(struct cpufreq_policy *policy, unsigned int index)
+{
+ struct dev_pm_opp *opp;
+ unsigned long volt = 0, volt_old = 0, tol = 0;
+ unsigned long freq, max_cpu_freq = 0;
+ unsigned int old_freq, new_freq;
+ long freq_Hz, freq_exact;
+ int ret, i;
+ struct clk *cpu_clk;
+ struct regulator *core;
+ unsigned int cpu;
+
+ cpu_clk = per_cpu(krait_cpu_clks, policy->cpu);
+
+ freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
+ if (freq_Hz <= 0)
+ freq_Hz = freq_table[index].frequency * 1000;
+
+ freq_exact = freq_Hz;
+ new_freq = freq_Hz / 1000;
+ old_freq = clk_get_rate(cpu_clk) / 1000;
+
+ core = per_cpu(krait_supply_core, policy->cpu);
+
+ rcu_read_lock();
+ opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ pr_err("failed to find OPP for %ld\n", freq_Hz);
+ return PTR_ERR(opp);
+ }
+ volt = dev_pm_opp_get_voltage(opp);
+ rcu_read_unlock();
+ tol = volt * voltage_tolerance / 100;
+ volt_old = regulator_get_voltage(core);
+
+ pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
+ old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+ new_freq / 1000, volt ? volt / 1000 : -1);
+
+ /* scaling up? scale voltage before frequency */
+ if (new_freq > old_freq) {
+ ret = regulator_set_voltage_tol(core, volt, tol);
+ if (ret) {
+ pr_err("failed to scale voltage up: %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = clk_set_rate(cpu_clk, freq_exact);
+ if (ret) {
+ pr_err("failed to set clock rate: %d\n", ret);
+ return ret;
+ }
+
+ /* scaling down? scale voltage after frequency */
+ if (new_freq < old_freq) {
+ ret = regulator_set_voltage_tol(core, volt, tol);
+ if (ret) {
+ pr_err("failed to scale voltage down: %d\n", ret);
+ clk_set_rate(cpu_clk, old_freq * 1000);
+ }
+ }
+
+ for_each_possible_cpu(cpu) {
+ freq = clk_get_rate(per_cpu(krait_cpu_clks, cpu));
+ max_cpu_freq = max(max_cpu_freq, freq);
+ }
+
+ for (i = 0; i < nr_krait_l2_points; i++) {
+ if (max_cpu_freq >= krait_l2_points[i].cpu_freq) {
+ if (krait_l2_reg) {
+ ret = regulator_set_voltage_tol(krait_l2_reg,
+ krait_l2_points[i].cache_volt,
+ tol);
+ if (ret) {
+ pr_err("failed to scale l2 voltage: %d\n",
+ ret);
+ }
+ }
+ ret = clk_set_rate(krait_l2_clk,
+ krait_l2_points[i].cache_freq);
+ if (ret)
+ pr_err("failed to scale l2 clk: %d\n", ret);
+ break;
+ }
+
+ }
+
+ return ret;
+}
+
+static int krait_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ policy->clk = per_cpu(krait_cpu_clks, policy->cpu);
+
+ ret = cpufreq_table_validate_and_show(policy, freq_table);
+ if (ret) {
+ pr_err("%s: invalid frequency table: %d\n", __func__, ret);
+ return ret;
+ }
+
+ policy->cpuinfo.transition_latency = transition_latency;
+
+ return 0;
+}
+
+static struct cpufreq_driver krait_cpufreq_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .target_index = krait_set_target,
+ .get = cpufreq_generic_get,
+ .init = krait_cpufreq_init,
+ .name = "generic_krait",
+ .attr = cpufreq_generic_attr,
+};
+
+static int krait_cpufreq_probe(struct platform_device *pdev)
+{
+ struct device_node *np, *cache;
+ int ret, i;
+ unsigned int cpu;
+ struct device *dev;
+ struct clk *clk;
+ struct regulator *core;
+ unsigned long freq_Hz, freq, max_cpu_freq = 0;
+ struct dev_pm_opp *opp;
+ unsigned long volt, tol;
+
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev) {
+ pr_err("failed to get krait device\n");
+ return -ENODEV;
+ }
+
+ np = of_node_get(cpu_dev->of_node);
+ if (!np) {
+ pr_err("failed to find krait node\n");
+ return -ENOENT;
+ }
+
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ if (ret) {
+ pr_err("failed to init cpufreq table: %d\n", ret);
+ goto out_put_node;
+ }
+
+ of_property_read_u32(np, "voltage-tolerance", &voltage_tolerance);
+
+ if (of_property_read_u32(np, "clock-latency", &transition_latency))
+ transition_latency = CPUFREQ_ETERNAL;
+
+ cache = of_find_next_cache_node(np);
+ if (cache) {
+ struct device_node *vdd;
+
+ vdd = of_parse_phandle(cache, "vdd_dig-supply", 0);
+ if (vdd) {
+ krait_l2_reg = regulator_get(NULL, vdd->name);
+ if (IS_ERR(krait_l2_reg)) {
+ pr_warn("failed to get l2 vdd_dig supply\n");
+ krait_l2_reg = NULL;
+ }
+ of_node_put(vdd);
+ }
+
+ krait_l2_clk = of_clk_get(cache, 0);
+ if (!IS_ERR(krait_l2_clk)) {
+ ret = krait_parse_cache_points(&pdev->dev, cache);
+ if (ret)
+ clk_put(krait_l2_clk);
+ }
+ if (IS_ERR(krait_l2_clk) || ret)
+ krait_l2_clk = NULL;
+ }
+
+ for_each_possible_cpu(cpu) {
+ dev = get_cpu_device(cpu);
+ if (!dev) {
+ pr_err("failed to get krait device\n");
+ ret = -ENOENT;
+ goto out_free_table;
+ }
+ per_cpu(krait_cpu_clks, cpu) = clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto out_free_table;
+ }
+ core = devm_regulator_get(dev, "core");
+ if (IS_ERR(core)) {
+ pr_debug("failed to get core regulator\n");
+ ret = PTR_ERR(core);
+ goto out_free_table;
+ }
+ per_cpu(krait_supply_core, cpu) = core;
+
+ freq = freq_Hz = clk_get_rate(clk);
+
+ rcu_read_lock();
+ opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ pr_err("failed to find OPP for %ld\n", freq_Hz);
+ ret = PTR_ERR(opp);
+ goto out_free_table;
+ }
+ volt = dev_pm_opp_get_voltage(opp);
+ rcu_read_unlock();
+
+ tol = volt * voltage_tolerance / 100;
+ ret = regulator_set_voltage_tol(core, volt, tol);
+ if (ret) {
+ pr_err("failed to scale voltage up: %d\n", ret);
+ goto out_free_table;
+ }
+ ret = regulator_enable(core);
+ if (ret) {
+ pr_err("failed to enable regulator: %d\n", ret);
+ goto out_free_table;
+ }
+ max_cpu_freq = max(max_cpu_freq, freq);
+ }
+
+ for (i = 0; i < nr_krait_l2_points; i++) {
+ if (max_cpu_freq >= krait_l2_points[i].cpu_freq) {
+ if (krait_l2_reg) {
+ ret = regulator_set_voltage_tol(krait_l2_reg,
+ krait_l2_points[i].cache_volt,
+ tol);
+ if (ret)
+ pr_err("failed to scale l2 voltage: %d\n",
+ ret);
+ ret = regulator_enable(krait_l2_reg);
+ if (ret)
+ pr_err("failed to enable l2 voltage: %d\n",
+ ret);
+ }
+ break;
+ }
+
+ }
+
+ ret = cpufreq_register_driver(&krait_cpufreq_driver);
+ if (ret) {
+ pr_err("failed register driver: %d\n", ret);
+ goto out_free_table;
+ }
+ of_node_put(np);
+
+ /*
+ * For now, just loading the cooling device;
+ * thermal DT code takes care of matching them.
+ */
+ for_each_possible_cpu(cpu) {
+ dev = get_cpu_device(cpu);
+ np = of_node_get(dev->of_node);
+ if (of_find_property(np, "#cooling-cells", NULL)) {
+ cdev = of_cpufreq_cooling_register(np, cpumask_of(cpu));
+ if (IS_ERR(cdev))
+ pr_err("running cpufreq without cooling device: %ld\n",
+ PTR_ERR(cdev));
+ }
+ of_node_put(np);
+ }
+
+ return 0;
+
+out_free_table:
+ regulator_put(krait_l2_reg);
+ clk_put(krait_l2_clk);
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_put_node:
+ of_node_put(np);
+ return ret;
+}
+
+static int krait_cpufreq_remove(struct platform_device *pdev)
+{
+ cpufreq_cooling_unregister(cdev);
+ cpufreq_unregister_driver(&krait_cpufreq_driver);
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+ clk_put(krait_l2_clk);
+ regulator_put(krait_l2_reg);
+
+ return 0;
+}
+
+static struct platform_driver krait_cpufreq_platdrv = {
+ .driver = {
+ .name = "cpufreq-krait",
+ .owner = THIS_MODULE,
+ },
+ .probe = krait_cpufreq_probe,
+ .remove = krait_cpufreq_remove,
+};
+module_platform_driver(krait_cpufreq_platdrv);
+
+MODULE_DESCRIPTION("Krait CPUfreq driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/cpufreq/qcom-cpufreq.c
+++ b/drivers/cpufreq/qcom-cpufreq.c
@@ -168,11 +168,8 @@ static int __init qcom_cpufreq_populate_
static int __init qcom_cpufreq_driver_init(void)
{
- struct cpufreq_dt_platform_data pdata = { .independent_clocks = true };
struct platform_device_info devinfo = {
- .name = "cpufreq-dt",
- .data = &pdata,
- .size_data = sizeof(pdata),
+ .name = "cpufreq-krait",
};
struct device *cpu_dev;
struct device_node *np;

70
target/linux/ipq806x/patches-3.18/150-dmaengine-Rework-dma_chan_get.patch
View file

@ -1,70 +0,0 @@
From d2f4f99db3e9ec8b063cf2e45704e2bb95428317 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:41:58 +0100
Subject: [PATCH] dmaengine: Rework dma_chan_get
dma_chan_get uses a rather interesting error handling and code path.
Change it to something more usual in the kernel.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
drivers/dma/dmaengine.c | 36 +++++++++++++++++++-----------------
1 file changed, 19 insertions(+), 17 deletions(-)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -222,31 +222,33 @@ static void balance_ref_count(struct dma
*/
static int dma_chan_get(struct dma_chan *chan)
{
- int err = -ENODEV;
struct module *owner = dma_chan_to_owner(chan);
+ int ret;
+ /* The channel is already in use, update client count */
if (chan->client_count) {
__module_get(owner);
- err = 0;
- } else if (try_module_get(owner))
- err = 0;
+ goto out;
+ }
- if (err == 0)
- chan->client_count++;
+ if (!try_module_get(owner))
+ return -ENODEV;
/* allocate upon first client reference */
- if (chan->client_count == 1 && err == 0) {
- int desc_cnt = chan->device->device_alloc_chan_resources(chan);
-
- if (desc_cnt < 0) {
- err = desc_cnt;
- chan->client_count = 0;
- module_put(owner);
- } else if (!dma_has_cap(DMA_PRIVATE, chan->device->cap_mask))
- balance_ref_count(chan);
- }
-
- return err;
+ ret = chan->device->device_alloc_chan_resources(chan);
+ if (ret < 0)
+ goto err_out;
+
+ if (!dma_has_cap(DMA_PRIVATE, chan->device->cap_mask))
+ balance_ref_count(chan);
+
+out:
+ chan->client_count++;
+ return 0;
+
+err_out:
+ module_put(owner);
+ return ret;
}
/**

27
target/linux/ipq806x/patches-3.18/151-dmaengine-Remove-the-need-to-declare-device_control.patch
View file

@ -1,27 +0,0 @@
From 4f8ef9f4140cc286d7d1cf9237da7a7439e4fc0b Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:42:03 +0100
Subject: [PATCH] dmaengine: Remove the need to declare device_control
In order to migrate the drivers without triggering a BUG_ON for the converted
drivers, which would cause bisectability issues, we need to remove that check
before removing the device_control function entirely.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
drivers/dma/dmaengine.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -814,8 +814,6 @@ int dma_async_device_register(struct dma
!device->device_prep_dma_sg);
BUG_ON(dma_has_cap(DMA_CYCLIC, device->cap_mask) &&
!device->device_prep_dma_cyclic);
- BUG_ON(dma_has_cap(DMA_SLAVE, device->cap_mask) &&
- !device->device_control);
BUG_ON(dma_has_cap(DMA_INTERLEAVE, device->cap_mask) &&
!device->device_prep_interleaved_dma);

62
target/linux/ipq806x/patches-3.18/152-dmaengine-Make-channel-allocation-callbacks-optional.patch
View file

@ -1,62 +0,0 @@
From c4b54a648e682f678c338619df848233a6babc46 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:41:59 +0100
Subject: [PATCH] dmaengine: Make channel allocation callbacks optional
Nowadays, some drivers don't have anything in there channel allocation
callbacks anymore.
Remove the BUG_ON if those callbacks aren't implemented, in order to allow
drivers to not implement them.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
drivers/dma/dmaengine.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -235,9 +235,11 @@ static int dma_chan_get(struct dma_chan
return -ENODEV;
/* allocate upon first client reference */
- ret = chan->device->device_alloc_chan_resources(chan);
- if (ret < 0)
- goto err_out;
+ if (chan->device->device_alloc_chan_resources) {
+ ret = chan->device->device_alloc_chan_resources(chan);
+ if (ret < 0)
+ goto err_out;
+ }
if (!dma_has_cap(DMA_PRIVATE, chan->device->cap_mask))
balance_ref_count(chan);
@@ -259,11 +261,15 @@ err_out:
*/
static void dma_chan_put(struct dma_chan *chan)
{
+ /* This channel is not in use, bail out */
if (!chan->client_count)
- return; /* this channel failed alloc_chan_resources */
+ return;
+
chan->client_count--;
module_put(dma_chan_to_owner(chan));
- if (chan->client_count == 0)
+
+ /* This channel is not in use anymore, free it */
+ if (!chan->client_count && chan->device->device_free_chan_resources)
chan->device->device_free_chan_resources(chan);
}
@@ -817,8 +823,6 @@ int dma_async_device_register(struct dma
BUG_ON(dma_has_cap(DMA_INTERLEAVE, device->cap_mask) &&
!device->device_prep_interleaved_dma);
- BUG_ON(!device->device_alloc_chan_resources);
- BUG_ON(!device->device_free_chan_resources);
BUG_ON(!device->device_tx_status);
BUG_ON(!device->device_issue_pending);
BUG_ON(!device->dev);

51
target/linux/ipq806x/patches-3.18/153-dmaengine-Introduce-a-device_config-callback.patch
View file

@ -1,51 +0,0 @@
From 94a73e30dfe6722e9f4ef19f7892901d7d00eab1 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:42:00 +0100
Subject: [PATCH] dmaengine: Introduce a device_config callback
The fact that the channel configuration is done in device_control is rather
misleading, since it's not really advertised as such, plus, the fact that the
framework exposes a function of its own makes it not really intuitive, while
we're losing the type checking whenever we pass that unsigned long argument.
Add a device_config callback to dma_device, with a fallback on the old
behaviour for now for existing drivers to opt in.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
include/linux/dmaengine.h | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -607,6 +607,8 @@ struct dma_tx_state {
* The function takes a buffer of size buf_len. The callback function will
* be called after period_len bytes have been transferred.
* @device_prep_interleaved_dma: Transfer expression in a generic way.
+ * @device_config: Pushes a new configuration to a channel, return 0 or an error
+ * code
* @device_control: manipulate all pending operations on a channel, returns
* zero or error code
* @device_tx_status: poll for transaction completion, the optional
@@ -673,6 +675,9 @@ struct dma_device {
struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
struct dma_chan *chan, struct dma_interleaved_template *xt,
unsigned long flags);
+
+ int (*device_config)(struct dma_chan *chan,
+ struct dma_slave_config *config);
int (*device_control)(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg);
@@ -696,6 +701,9 @@ static inline int dmaengine_device_contr
static inline int dmaengine_slave_config(struct dma_chan *chan,
struct dma_slave_config *config)
{
+ if (chan->device->device_config)
+ return chan->device->device_config(chan, config);
+
return dmaengine_device_control(chan, DMA_SLAVE_CONFIG,
(unsigned long)config);
}

47
target/linux/ipq806x/patches-3.18/154-dmaengine-Add-device_terminate_all-callback.patch
View file

@ -1,47 +0,0 @@
From 7fa0cf462daa6f6121b332b87833d7f5bdb515c0 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 17 Nov 2014 14:42:02 +0100
Subject: [PATCH] dmaengine: Add device_terminate_all callback
Split out the terminate_all command from device_control to a dma_device
callback. In order to preserve backward capability, still rely on
device_control if no such callback has been implemented.
Eventually, this will allow to create a generic dma_slave_caps callback.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
include/linux/dmaengine.h | 6 ++++++
1 file changed, 6 insertions(+)
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -611,6 +611,8 @@ struct dma_tx_state {
* code
* @device_control: manipulate all pending operations on a channel, returns
* zero or error code
+ * @device_terminate_all: Aborts all transfers on a channel. Returns 0
+ * or an error code
* @device_tx_status: poll for transaction completion, the optional
* txstate parameter can be supplied with a pointer to get a
* struct with auxiliary transfer status information, otherwise the call
@@ -680,6 +682,7 @@ struct dma_device {
struct dma_slave_config *config);
int (*device_control)(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg);
+ int (*device_terminate_all)(struct dma_chan *chan);
enum dma_status (*device_tx_status)(struct dma_chan *chan,
dma_cookie_t cookie,
@@ -789,6 +792,9 @@ static inline int dma_get_slave_caps(str
static inline int dmaengine_terminate_all(struct dma_chan *chan)
{
+ if (chan->device->device_terminate_all)
+ return chan->device->device_terminate_all(chan);
+
return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
}

958
target/linux/ipq806x/patches-3.18/156-dmaengine-Add-ADM-driver.patch
View file

@ -1,958 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v6,2/2] dmaengine: Add ADM driver
From: Andy Gross <agross@codeaurora.org>
X-Patchwork-Id: 6027351
Message-Id: <1426571172-9711-3-git-send-email-agross@codeaurora.org>
To: Vinod Koul <vinod.koul@intel.com>
Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@sonymobile.com>,
Andy Gross <agross@codeaurora.org>
Date: Tue, 17 Mar 2015 00:46:12 -0500
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
controller found in the MSM8x60 and IPQ/APQ8064 platforms.
The ADM supports both memory to memory transactions and memory
to/from peripheral device transactions. The controller also provides flow
control capabilities for transactions to/from peripheral devices.
The initial release of this driver supports slave transfers to/from peripherals
and also incorporates CRCI (client rate control interface) flow control.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: sricharan <sricharan@codeaurora.org>
---
drivers/dma/Kconfig | 10 +
drivers/dma/Makefile | 1 +
drivers/dma/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 911 insertions(+)
create mode 100644 drivers/dma/qcom_adm.c
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -457,4 +457,14 @@ config QCOM_BAM_DMA
Enable support for the QCOM BAM DMA controller. This controller
provides DMA capabilities for a variety of on-chip devices.
+config QCOM_ADM
+ tristate "Qualcomm ADM support"
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ ---help---
+ Enable support for the Qualcomm ADM DMA controller. This controller
+ provides DMA capabilities for both general purpose and on-chip
+ peripheral devices.
+
endif
--- /dev/null
+++ b/drivers/dma/qcom_adm.c
@@ -0,0 +1,896 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+/* ADM registers - calculated from channel number and security domain */
+#define ADM_CHAN_MULTI 0x4
+#define ADM_CI_MULTI 0x4
+#define ADM_CRCI_MULTI 0x4
+#define ADM_EE_MULTI 0x800
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
+#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
+#define ADM_GP_CTL 0x3d8
+#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
+ ADM_EE_OFFS(ee))
+
+/* channel status */
+#define ADM_CH_STATUS_VALID BIT(1)
+
+/* channel result */
+#define ADM_CH_RSLT_VALID BIT(31)
+#define ADM_CH_RSLT_ERR BIT(3)
+#define ADM_CH_RSLT_FLUSH BIT(2)
+#define ADM_CH_RSLT_TPD BIT(1)
+
+/* channel conf */
+#define ADM_CH_CONF_SHADOW_EN BIT(12)
+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
+#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
+
+/* channel result conf */
+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
+
+/* CRCI CTL */
+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
+#define ADM_CRCI_CTL_RST BIT(17)
+
+/* CI configuration */
+#define ADM_CI_RANGE_END(x) (x << 24)
+#define ADM_CI_RANGE_START(x) (x << 16)
+#define ADM_CI_BURST_4_WORDS BIT(2)
+#define ADM_CI_BURST_8_WORDS BIT(3)
+
+/* GP CTL */
+#define ADM_GP_CTL_LP_EN BIT(12)
+#define ADM_GP_CTL_LP_CNT(x) (x << 8)
+
+/* Command pointer list entry */
+#define ADM_CPLE_LP BIT(31)
+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
+
+/* Command list entry */
+#define ADM_CMD_LC BIT(31)
+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
+
+#define ADM_CMD_TYPE_SINGLE 0x0
+#define ADM_CMD_TYPE_BOX 0x3
+
+#define ADM_CRCI_MUX_SEL BIT(4)
+#define ADM_DESC_ALIGN 8
+#define ADM_MAX_XFER (SZ_64K-1)
+#define ADM_MAX_ROWS (SZ_64K-1)
+#define ADM_MAX_CHANNELS 16
+
+struct adm_desc_hw_box {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 row_len;
+ u32 num_rows;
+ u32 row_offset;
+};
+
+struct adm_desc_hw_single {
+ u32 cmd;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 len;
+};
+
+struct adm_async_desc {
+ struct virt_dma_desc vd;
+ struct adm_device *adev;
+
+ size_t length;
+ enum dma_transfer_direction dir;
+ dma_addr_t dma_addr;
+ size_t dma_len;
+
+ void *cpl;
+ dma_addr_t cp_addr;
+ u32 crci;
+ u32 mux;
+ u32 blk_size;
+};
+
+struct adm_chan {
+ struct virt_dma_chan vc;
+ struct adm_device *adev;
+
+ /* parsed from DT */
+ u32 id; /* channel id */
+
+ struct adm_async_desc *curr_txd;
+ struct dma_slave_config slave;
+ struct list_head node;
+
+ int error;
+ int initialized;
+};
+
+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
+{
+ return container_of(common, struct adm_chan, vc.chan);
+}
+
+struct adm_device {
+ void __iomem *regs;
+ struct device *dev;
+ struct dma_device common;
+ struct device_dma_parameters dma_parms;
+ struct adm_chan *channels;
+
+ u32 ee;
+
+ struct clk *core_clk;
+ struct clk *iface_clk;
+
+ struct reset_control *clk_reset;
+ struct reset_control *c0_reset;
+ struct reset_control *c1_reset;
+ struct reset_control *c2_reset;
+ int irq;
+};
+
+/**
+ * adm_free_chan - Frees dma resources associated with the specific channel
+ *
+ * Free all allocated descriptors associated with this channel
+ *
+ */
+static void adm_free_chan(struct dma_chan *chan)
+{
+ /* free all queued descriptors */
+ vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+/**
+ * adm_get_blksize - Get block size from burst value
+ *
+ */
+static int adm_get_blksize(unsigned int burst)
+{
+ int ret;
+
+ switch (burst) {
+ case 16:
+ case 32:
+ case 64:
+ case 128:
+ ret = ffs(burst>>4) - 1;
+ break;
+ case 192:
+ ret = 4;
+ break;
+ case 256:
+ ret = 5;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @crci: CRCI value
+ * @burst: Burst size of transaction
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg, u32 crci, u32 burst,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_box *box_desc = NULL;
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 rows, row_offset, crci_cmd;
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
+ row_offset = burst;
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ crci_cmd = ADM_CMD_DST_CRCI(crci);
+ row_offset = burst << 16;
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ while (remainder >= burst) {
+ box_desc = desc;
+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
+ box_desc->row_offset = row_offset;
+ box_desc->src_addr = *src;
+ box_desc->dst_addr = *dst;
+
+ rows = remainder / burst;
+ rows = min_t(u32, rows, ADM_MAX_ROWS);
+ box_desc->num_rows = rows << 16 | rows;
+ box_desc->row_len = burst << 16 | burst;
+
+ *incr_addr += burst * rows;
+ remainder -= burst * rows;
+ desc += sizeof(*box_desc);
+ }
+
+ /* if leftover bytes, do one single descriptor */
+ if (remainder) {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
+ single_desc->len = remainder;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ desc += sizeof(*single_desc);
+
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+ } else {
+ if (box_desc && sg_is_last(sg))
+ box_desc->cmd |= ADM_CMD_LC;
+ }
+
+ return desc;
+}
+
+/**
+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
+ *
+ * @achan: ADM channel
+ * @desc: Descriptor memory pointer
+ * @sg: Scatterlist entry
+ * @direction: DMA transfer direction
+ */
+static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
+ void *desc, struct scatterlist *sg,
+ enum dma_transfer_direction direction)
+{
+ struct adm_desc_hw_single *single_desc;
+ u32 remainder = sg_dma_len(sg);
+ u32 mem_addr = sg_dma_address(sg);
+ u32 *incr_addr = &mem_addr;
+ u32 *src, *dst;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ src = &achan->slave.src_addr;
+ dst = &mem_addr;
+ } else {
+ src = &mem_addr;
+ dst = &achan->slave.dst_addr;
+ }
+
+ do {
+ single_desc = desc;
+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
+ single_desc->src_addr = *src;
+ single_desc->dst_addr = *dst;
+ single_desc->len = (remainder > ADM_MAX_XFER) ?
+ ADM_MAX_XFER : remainder;
+
+ remainder -= single_desc->len;
+ *incr_addr += single_desc->len;
+ desc += sizeof(*single_desc);
+ } while (remainder);
+
+ /* set last command if this is the end of the whole transaction */
+ if (sg_is_last(sg))
+ single_desc->cmd |= ADM_CMD_LC;
+
+ return desc;
+}
+
+/**
+ * adm_prep_slave_sg - Prep slave sg transaction
+ *
+ * @chan: dma channel
+ * @sgl: scatter gather list
+ * @sg_len: length of sg
+ * @direction: DMA transfer direction
+ * @flags: DMA flags
+ * @context: transfer context (unused)
+ */
+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
+ struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction direction, unsigned long flags,
+ void *context)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+ struct scatterlist *sg;
+ u32 i, burst;
+ u32 single_count = 0, box_count = 0, crci = 0;
+ void *desc;
+ u32 *cple;
+ int blk_size = 0;
+
+ if (!is_slave_direction(direction)) {
+ dev_err(adev->dev, "invalid dma direction\n");
+ return NULL;
+ }
+
+ /*
+ * get burst value from slave configuration
+ */
+ burst = (direction == DMA_MEM_TO_DEV) ?
+ achan->slave.dst_maxburst :
+ achan->slave.src_maxburst;
+
+ /* if using flow control, validate burst and crci values */
+ if (achan->slave.device_fc) {
+
+ blk_size = adm_get_blksize(burst);
+ if (blk_size < 0) {
+ dev_err(adev->dev, "invalid burst value: %d\n",
+ burst);
+ return ERR_PTR(-EINVAL);
+ }
+
+ crci = achan->slave.slave_id & 0xf;
+ if (!crci || achan->slave.slave_id > 0x1f) {
+ dev_err(adev->dev, "invalid crci value\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ /* iterate through sgs and compute allocation size of structures */
+ for_each_sg(sgl, sg, sg_len, i) {
+ if (achan->slave.device_fc) {
+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
+ ADM_MAX_ROWS);
+ if (sg_dma_len(sg) % burst)
+ single_count++;
+ } else {
+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
+ ADM_MAX_XFER);
+ }
+ }
+
+ async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
+ if (!async_desc)
+ return ERR_PTR(-ENOMEM);
+
+ if (crci)
+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
+ ADM_CRCI_CTL_MUX_SEL : 0;
+ async_desc->crci = crci;
+ async_desc->blk_size = blk_size;
+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
+ box_count * sizeof(struct adm_desc_hw_box) +
+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
+
+ async_desc->cpl = dma_alloc_writecombine(adev->dev, async_desc->dma_len,
+ &async_desc->dma_addr, GFP_NOWAIT);
+
+ if (!async_desc->cpl) {
+ kfree(async_desc);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ async_desc->adev = adev;
+
+ /* both command list entry and descriptors must be 8 byte aligned */
+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
+
+ /* init cmd list */
+ *cple = ADM_CPLE_LP;
+ *cple |= (desc - async_desc->cpl + async_desc->dma_addr) >> 3;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ async_desc->length += sg_dma_len(sg);
+
+ if (achan->slave.device_fc)
+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
+ burst, direction);
+ else
+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
+ direction);
+ }
+
+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
+}
+
+/**
+ * adm_terminate_all - terminate all transactions on a channel
+ * @achan: adm dma channel
+ *
+ * Dequeues and frees all transactions, aborts current transaction
+ * No callbacks are done
+ *
+ */
+static int adm_terminate_all(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct adm_device *adev = achan->adev;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ vchan_get_all_descriptors(&achan->vc, &head);
+
+ /* send flush command to terminate current transaction */
+ writel_relaxed(0x0,
+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ vchan_dma_desc_free_list(&achan->vc, &head);
+
+ return 0;
+}
+
+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flag;
+
+ spin_lock_irqsave(&achan->vc.lock, flag);
+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+ spin_unlock_irqrestore(&achan->vc.lock, flag);
+
+ return 0;
+}
+
+/**
+ * adm_start_dma - start next transaction
+ * @achan - ADM dma channel
+ */
+static void adm_start_dma(struct adm_chan *achan)
+{
+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
+ struct adm_device *adev = achan->adev;
+ struct adm_async_desc *async_desc;
+
+ lockdep_assert_held(&achan->vc.lock);
+
+ if (!vd)
+ return;
+
+ list_del(&vd->node);
+
+ /* write next command list out to the CMD FIFO */
+ async_desc = container_of(vd, struct adm_async_desc, vd);
+ achan->curr_txd = async_desc;
+
+ /* reset channel error */
+ achan->error = 0;
+
+ if (!achan->initialized) {
+ /* enable interrupts */
+ writel(ADM_CH_CONF_SHADOW_EN |
+ ADM_CH_CONF_PERM_MPU_CONF |
+ ADM_CH_CONF_MPU_DISABLE |
+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
+ adev->regs + ADM_CH_CONF(achan->id));
+
+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ achan->initialized = 1;
+ }
+
+ /* set the crci block size if this transaction requires CRCI */
+ if (async_desc->crci) {
+ writel(async_desc->mux | async_desc->blk_size,
+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
+ }
+
+ /* make sure IRQ enable doesn't get reordered */
+ wmb();
+
+ /* write next command list out to the CMD FIFO */
+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
+}
+
+/**
+ * adm_dma_irq - irq handler for ADM controller
+ * @irq: IRQ of interrupt
+ * @data: callback data
+ *
+ * IRQ handler for the bam controller
+ */
+static irqreturn_t adm_dma_irq(int irq, void *data)
+{
+ struct adm_device *adev = data;
+ u32 srcs, i;
+ struct adm_async_desc *async_desc;
+ unsigned long flags;
+
+ srcs = readl_relaxed(adev->regs +
+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ struct adm_chan *achan = &adev->channels[i];
+ u32 status, result;
+
+ if (srcs & BIT(i)) {
+ status = readl_relaxed(adev->regs +
+ ADM_CH_STATUS_SD(i, adev->ee));
+
+ /* if no result present, skip */
+ if (!(status & ADM_CH_STATUS_VALID))
+ continue;
+
+ result = readl_relaxed(adev->regs +
+ ADM_CH_RSLT(i, adev->ee));
+
+ /* no valid results, skip */
+ if (!(result & ADM_CH_RSLT_VALID))
+ continue;
+
+ /* flag error if transaction was flushed or failed */
+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
+ achan->error = 1;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+ async_desc = achan->curr_txd;
+
+ achan->curr_txd = NULL;
+
+ if (async_desc) {
+ vchan_cookie_complete(&async_desc->vd);
+
+ /* kick off next DMA */
+ adm_start_dma(achan);
+ }
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * adm_tx_status - returns status of transaction
+ * @chan: dma channel
+ * @cookie: transaction cookie
+ * @txstate: DMA transaction state
+ *
+ * Return status of dma transaction
+ */
+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ struct virt_dma_desc *vd;
+ enum dma_status ret;
+ unsigned long flags;
+ size_t residue = 0;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_COMPLETE || !txstate)
+ return ret;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ vd = vchan_find_desc(&achan->vc, cookie);
+ if (vd)
+ residue = container_of(vd, struct adm_async_desc, vd)->length;
+
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+
+ /*
+ * residue is either the full length if it is in the issued list, or 0
+ * if it is in progress. We have no reliable way of determining
+ * anything inbetween
+ */
+ dma_set_residue(txstate, residue);
+
+ if (achan->error)
+ return DMA_ERROR;
+
+ return ret;
+}
+
+/**
+ * adm_issue_pending - starts pending transactions
+ * @chan: dma channel
+ *
+ * Issues all pending transactions and starts DMA
+ */
+static void adm_issue_pending(struct dma_chan *chan)
+{
+ struct adm_chan *achan = to_adm_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&achan->vc.lock, flags);
+
+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
+ adm_start_dma(achan);
+ spin_unlock_irqrestore(&achan->vc.lock, flags);
+}
+
+/**
+ * adm_dma_free_desc - free descriptor memory
+ * @vd: virtual descriptor
+ *
+ */
+static void adm_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct adm_async_desc *async_desc = container_of(vd,
+ struct adm_async_desc, vd);
+
+ dma_free_writecombine(async_desc->adev->dev, async_desc->dma_len,
+ async_desc->cpl, async_desc->dma_addr);
+ kfree(async_desc);
+}
+
+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
+ u32 index)
+{
+ achan->id = index;
+ achan->adev = adev;
+
+ vchan_init(&achan->vc, &adev->common);
+ achan->vc.desc_free = adm_dma_free_desc;
+}
+
+static int adm_dma_probe(struct platform_device *pdev)
+{
+ struct adm_device *adev;
+ struct resource *iores;
+ int ret;
+ u32 i;
+
+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ adev->dev = &pdev->dev;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(adev->regs))
+ return PTR_ERR(adev->regs);
+
+ adev->irq = platform_get_irq(pdev, 0);
+ if (adev->irq < 0)
+ return adev->irq;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
+ if (ret) {
+ dev_err(adev->dev, "Execution environment unspecified\n");
+ return ret;
+ }
+
+ adev->core_clk = devm_clk_get(adev->dev, "core");
+ if (IS_ERR(adev->core_clk))
+ return PTR_ERR(adev->core_clk);
+
+ ret = clk_prepare_enable(adev->core_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
+ return ret;
+ }
+
+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
+ if (IS_ERR(adev->iface_clk)) {
+ ret = PTR_ERR(adev->iface_clk);
+ goto err_disable_core_clk;
+ }
+
+ ret = clk_prepare_enable(adev->iface_clk);
+ if (ret) {
+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
+ goto err_disable_core_clk;
+ }
+
+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
+ if (IS_ERR(adev->clk_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 reset\n");
+ ret = PTR_ERR(adev->clk_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
+ if (IS_ERR(adev->c0_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
+ ret = PTR_ERR(adev->c0_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
+ if (IS_ERR(adev->c1_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
+ ret = PTR_ERR(adev->c1_reset);
+ goto err_disable_clks;
+ }
+
+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
+ if (IS_ERR(adev->c2_reset)) {
+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
+ ret = PTR_ERR(adev->c2_reset);
+ goto err_disable_clks;
+ }
+
+ reset_control_assert(adev->clk_reset);
+ reset_control_assert(adev->c0_reset);
+ reset_control_assert(adev->c1_reset);
+ reset_control_assert(adev->c2_reset);
+
+ reset_control_deassert(adev->clk_reset);
+ reset_control_deassert(adev->c0_reset);
+ reset_control_deassert(adev->c1_reset);
+ reset_control_deassert(adev->c2_reset);
+
+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
+ sizeof(*adev->channels), GFP_KERNEL);
+
+ if (!adev->channels) {
+ ret = -ENOMEM;
+ goto err_disable_clks;
+ }
+
+ /* allocate and initialize channels */
+ INIT_LIST_HEAD(&adev->common.channels);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
+ adm_channel_init(adev, &adev->channels[i], i);
+
+ /* reset CRCIs */
+ for (i = 0; i < 16; i++)
+ writel(ADM_CRCI_CTL_RST, adev->regs +
+ ADM_CRCI_CTL(i, adev->ee));
+
+ /* configure client interfaces */
+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
+ adev->regs + ADM_GP_CTL);
+
+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
+ 0, "adm_dma", adev);
+ if (ret)
+ goto err_disable_clks;
+
+ platform_set_drvdata(pdev, adev);
+
+ adev->common.dev = adev->dev;
+ adev->common.dev->dma_parms = &adev->dma_parms;
+
+ /* set capabilities */
+ dma_cap_zero(adev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
+
+ /* initialize dmaengine apis */
+ adev->common.device_free_chan_resources = adm_free_chan;
+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
+ adev->common.device_issue_pending = adm_issue_pending;
+ adev->common.device_tx_status = adm_tx_status;
+ adev->common.device_terminate_all = adm_terminate_all;
+ adev->common.device_config = adm_slave_config;
+
+ ret = dma_async_device_register(&adev->common);
+ if (ret) {
+ dev_err(adev->dev, "failed to register dma async device\n");
+ goto err_disable_clks;
+ }
+
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ of_dma_xlate_by_chan_id,
+ &adev->common);
+ if (ret)
+ goto err_unregister_dma;
+
+ return 0;
+
+err_unregister_dma:
+ dma_async_device_unregister(&adev->common);
+err_disable_clks:
+ clk_disable_unprepare(adev->iface_clk);
+err_disable_core_clk:
+ clk_disable_unprepare(adev->core_clk);
+
+ return ret;
+}
+
+static int adm_dma_remove(struct platform_device *pdev)
+{
+ struct adm_device *adev = platform_get_drvdata(pdev);
+ struct adm_chan *achan;
+ u32 i;
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&adev->common);
+
+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
+ achan = &adev->channels[i];
+
+ /* mask IRQs for this channel/EE pair */
+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
+
+ adm_terminate_all(&adev->channels[i].vc.chan);
+ }
+
+ devm_free_irq(adev->dev, adev->irq, adev);
+
+ clk_disable_unprepare(adev->core_clk);
+ clk_disable_unprepare(adev->iface_clk);
+
+ return 0;
+}
+
+static const struct of_device_id adm_of_match[] = {
+ { .compatible = "qcom,adm", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, adm_of_match);
+
+static struct platform_driver adm_dma_driver = {
+ .probe = adm_dma_probe,
+ .remove = adm_dma_remove,
+ .driver = {
+ .name = "adm-dma-engine",
+ .of_match_table = adm_of_match,
+ },
+};
+
+module_platform_driver(adm_dma_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -49,3 +49,4 @@ obj-y += xilinx/
obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o
obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o

42
target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
View file

@ -1,42 +0,0 @@
From 1fb18acab2d71e7e4efd9c10492edb1baf84dcc0 Mon Sep 17 00:00:00 2001
From: Andy Gross <agross@codeaurora.org>
Date: Wed, 20 May 2015 15:41:07 +0530
Subject: [PATCH] ARM: DT: ipq8064: Add ADM device node
This patch adds support for the ADM DMA on the IPQ8064 SOC
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 4 ++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 21 +++++++++++++++++++++
2 files changed, 25 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -705,6 +705,26 @@
};
};
+ adm_dma: dma@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
+
+ status = "disabled";
+ };
+
};
sfpb_mutex: sfpb-mutex {

74
target/linux/ipq806x/patches-3.18/160-clk-qcom-Add-EBI2-clocks-for-IPQ806x.patch
View file

@ -1,74 +0,0 @@
From 4c385b25fab119144bffb255ad77712fe586ac10 Mon Sep 17 00:00:00 2001
From: Archit Taneja <architt@codeaurora.org>
Date: Thu, 2 Apr 2015 11:20:41 +0530
Subject: [PATCH] clk: qcom: Add EBI2 clocks for IPQ806x
The NAND controller within EBI2 requires EBI2_CLK and
EBI2_ALWAYS_ON_CLK clocks. Create structs for these clocks so
that they can be used by the NAND controller driver. Add an entry
for EBI2_AON_CLK in the gcc-ipq806x DT binding document.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-ipq806x.c | 32 ++++++++++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-ipq806x.h | 1 +
2 files changed, 33 insertions(+)
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -2239,6 +2239,36 @@ static struct clk_branch usb_fs1_h_clk =
},
};
+static struct clk_branch ebi2_clk = {
+ .hwcg_reg = 0x3b00,
+ .hwcg_bit = 6,
+ .halt_reg = 0x2fcc,
+ .halt_bit = 1,
+ .clkr = {
+ .enable_reg = 0x3b00,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "ebi2_clk",
+ .ops = &clk_branch_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ },
+};
+
+static struct clk_branch ebi2_aon_clk = {
+ .halt_reg = 0x2fcc,
+ .halt_bit = 0,
+ .clkr = {
+ .enable_reg = 0x3b00,
+ .enable_mask = BIT(8),
+ .hw.init = &(struct clk_init_data){
+ .name = "ebi2_always_on_clk",
+ .ops = &clk_branch_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ },
+};
+
static struct clk_regmap *gcc_ipq806x_clks[] = {
[PLL0] = &pll0.clkr,
[PLL0_VOTE] = &pll0_vote,
@@ -2341,6 +2371,8 @@ static struct clk_regmap *gcc_ipq806x_cl
[USB_FS1_XCVR_SRC] = &usb_fs1_xcvr_clk_src.clkr,
[USB_FS1_XCVR_CLK] = &usb_fs1_xcvr_clk.clkr,
[USB_FS1_SYSTEM_CLK] = &usb_fs1_sys_clk.clkr,
+ [EBI2_CLK] = &ebi2_clk.clkr,
+ [EBI2_AON_CLK] = &ebi2_aon_clk.clkr,
[PLL9] = &hfpll0.clkr,
[PLL10] = &hfpll1.clkr,
[PLL12] = &hfpll_l2.clkr,
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -289,5 +289,6 @@
#define UBI32_CORE2_CLK_SRC 278
#define UBI32_CORE1_CLK 279
#define UBI32_CORE2_CLK 280
+#define EBI2_AON_CLK 281
#endif

84
target/linux/ipq806x/patches-3.18/161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch
View file

@ -1,84 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,
1/5] mtd: nand: Create a BBT flag to access bad block markers in raw
mode
From: Archit Taneja <architt@codeaurora.org>
X-Patchwork-Id: 6927081
Message-Id: <1438578498-32254-2-git-send-email-architt@codeaurora.org>
To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
cernekee@gmail.com, computersforpeace@gmail.com
Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
Archit Taneja <architt@codeaurora.org>
Date: Mon, 3 Aug 2015 10:38:14 +0530
Some controllers can access the factory bad block marker from OOB only
when they read it in raw mode. When ECC is enabled, these controllers
discard reading/writing bad block markers, preventing access to them
altogether.
The bbt driver assumes MTD_OPS_PLACE_OOB when scanning for bad blocks.
This results in the nand driver's ecc->read_oob() op to be called, which
works with ECC enabled.
Create a new BBT option flag that tells nand_bbt to force the mode to
MTD_OPS_RAW. This would result in the correct op being called for the
underlying nand controller driver.
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/mtd/nand/nand_base.c | 6 +++++-
drivers/mtd/nand/nand_bbt.c | 6 +++++-
include/linux/mtd/bbm.h | 7 +++++++
3 files changed, 17 insertions(+), 2 deletions(-)
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -396,7 +396,11 @@ static int nand_default_block_markbad(st
} else {
ops.len = ops.ooblen = 1;
}
- ops.mode = MTD_OPS_PLACE_OOB;
+
+ if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
+ ops.mode = MTD_OPS_RAW;
+ else
+ ops.mode = MTD_OPS_PLACE_OOB;
/* Write to first/last page(s) if necessary */
if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -423,7 +423,11 @@ static int scan_block_fast(struct mtd_in
ops.oobbuf = buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OPS_PLACE_OOB;
+
+ if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
+ ops.mode = MTD_OPS_RAW;
+ else
+ ops.mode = MTD_OPS_PLACE_OOB;
for (j = 0; j < numpages; j++) {
/*
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -116,6 +116,13 @@ struct nand_bbt_descr {
#define NAND_BBT_NO_OOB_BBM 0x00080000
/*
+ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
+ * be used by controllers which can access BBM only when ECC is disabled, i.e,
+ * when in RAW access mode
+ */
+#define NAND_BBT_ACCESS_BBM_RAW 0x00100000
+
+/*
* Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
* was allocated dynamicaly and must be freed in nand_release(). Has no meaning
* in nand_chip.bbt_options.

2024
target/linux/ipq806x/patches-3.18/162-mtd-nand-Qualcomm-NAND-controller-driver.patch
View file

File diff suppressed because it is too large Load diff

79
target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
View file

@ -1,79 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,5/5] arm: qcom: dts: Enable NAND node on IPQ8064 AP148 platform
From: Archit Taneja <architt@codeaurora.org>
X-Patchwork-Id: 6927091
Message-Id: <1438578498-32254-6-git-send-email-architt@codeaurora.org>
To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
cernekee@gmail.com, computersforpeace@gmail.com
Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
Archit Taneja <architt@codeaurora.org>, devicetree@vger.kernel.org
Date: Mon, 3 Aug 2015 10:38:18 +0530
Enable the NAND controller node on the AP148 platform. Provide pinmux
information.
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -43,6 +43,31 @@
bias-none;
};
};
+
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
};
gsbi@16300000 {
@@ -125,5 +150,19 @@
status = "ok";
phy-tx0-term-offset = <7>;
};
+
+ nand@1ac00000 {
+ status = "ok";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ };
};
};
+
+&adm_dma {
+ status = "ok";
+};

367
target/linux/ipq806x/patches-3.18/301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch
View file

@ -1,367 +0,0 @@
From 7e77aa188a7a7c4391856a9e5ef5ef58f769e679 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 9 Aug 2015 13:02:38 +0200
Subject: [PATCH] ARM: qcom: add Netgear Nighthawk X4 R7500 device tree
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-ipq8064-r7500.dts | 370 +++++++++++++++++++++++++++++++
2 files changed, 371 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-r7500.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -361,6 +361,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8084-mtp.dtb \
qcom-ipq8064-ap148.dtb \
qcom-ipq8064-db149.dtb \
+ qcom-ipq8064-r7500.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -0,0 +1,342 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear Nighthawk X4 R7500";
+ compatible = "netgear,r7500", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0xe000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ serial0 = &uart4;
+ mdio-gpio0 = &mdio0;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ pinmux@800000 {
+ i2c4_pins: i2c4_pinmux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ bias-disable;
+ };
+
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+ };
+
+ gsbi@16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial@16340000 {
+ status = "ok";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ };
+
+ sata-phy@1b400000 {
+ status = "ok";
+ };
+
+ sata@29000000 {
+ status = "ok";
+ };
+
+ phy@100f8800 { /* USB3 port 1 HS phy */
+ status = "ok";
+ };
+
+ phy@100f8830 { /* USB3 port 1 SS phy */
+ status = "ok";
+ };
+
+ phy@110f8800 { /* USB3 port 0 HS phy */
+ status = "ok";
+ };
+
+ phy@110f8830 { /* USB3 port 0 SS phy */
+ status = "ok";
+ };
+
+ usb30@0 {
+ status = "ok";
+ };
+
+ usb30@1 {
+ status = "ok";
+ };
+
+ pcie0: pci@1b500000 {
+ status = "ok";
+ };
+
+ pcie1: pci@1b700000 {
+ status = "ok";
+ };
+
+ nand@1ac00000 {
+ status = "ok";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata@0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art: art@1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ };
+
+ kernel@1340000 {
+ label = "kernel";
+ reg = <0x1340000 0x0200000>;
+ };
+
+ ubi@1540000 {
+ label = "ubi";
+ reg = <0x1540000 0x1800000>;
+ };
+
+ netgear@2d40000 {
+ label = "netgear";
+ reg = <0x2d40000 0x0c00000>;
+ read-only;
+ };
+
+ reserve@3940000 {
+ label = "reserve";
+ reg = <0x3940000 0x46c0000>;
+ read-only;
+ };
+
+ firmware@1340000 {
+ label = "firmware";
+ reg = <0x1340000 0x1a00000>;
+ };
+
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ mtd-mac-address = <&art 6>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ mtd-mac-address = <&art 0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 1>;
+ linux,code = <KEY_WLAN>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 1>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ usb1 {
+ label = "r7500:amber:usb1";
+ gpios = <&qcom_pinmux 7 0>;
+ };
+
+ usb3 {
+ label = "r7500:amber:usb3";
+ gpios = <&qcom_pinmux 8 0>;
+ };
+
+ status {
+ label = "r7500:amber:status";
+ gpios = <&qcom_pinmux 9 0>;
+ };
+
+ internet {
+ label = "r7500:white:internet";
+ gpios = <&qcom_pinmux 22 0>;
+ };
+
+ wan {
+ label = "r7500:white:wan";
+ gpios = <&qcom_pinmux 23 0>;
+ };
+
+ wps {
+ label = "r7500:white:wps";
+ gpios = <&qcom_pinmux 24 0>;
+ };
+
+ esata {
+ label = "r7500:white:esata";
+ gpios = <&qcom_pinmux 26 0>;
+ };
+
+ power {
+ label = "r7500:white:power";
+ gpios = <&qcom_pinmux 53 0>;
+ default-state = "on";
+ };
+
+ rfkill {
+ label = "r7500:white:rfkill";
+ gpios = <&qcom_pinmux 64 0>;
+ };
+
+ wifi5g {
+ label = "r7500:white:wifi5g";
+ gpios = <&qcom_pinmux 67 0>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "ok";
+};

733
target/linux/ipq806x/patches-3.18/700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch
View file

@ -1,733 +0,0 @@
From 2fbb18f85826a9ba308fedb2cf90d3a661a39fd7 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 27 Mar 2015 00:16:14 -0700
Subject: [PATCH] clk: qcom: Add support for NSS/GMAC clocks and resets
Add the NSS/GMAC clocks and the TCM clock and NSS resets.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-ipq806x.c | 594 ++++++++++++++++++++++++++-
drivers/clk/qcom/gcc-ipq806x.c.rej | 50 +++
include/dt-bindings/clock/qcom,gcc-ipq806x.h | 2 +
include/dt-bindings/reset/qcom,gcc-ipq806x.h | 43 ++
4 files changed, 688 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/qcom/gcc-ipq806x.c.rej
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -209,11 +209,46 @@ static struct clk_regmap pll14_vote = {
},
};
+#define NSS_PLL_RATE(f, _l, _m, _n, i) \
+ { \
+ .freq = f, \
+ .l = _l, \
+ .m = _m, \
+ .n = _n, \
+ .ibits = i, \
+ }
+
+static struct pll_freq_tbl pll18_freq_tbl[] = {
+ NSS_PLL_RATE(550000000, 44, 0, 1, 0x01495625),
+ NSS_PLL_RATE(733000000, 58, 16, 25, 0x014b5625),
+};
+
+static struct clk_pll pll18 = {
+ .l_reg = 0x31a4,
+ .m_reg = 0x31a8,
+ .n_reg = 0x31ac,
+ .config_reg = 0x31b4,
+ .mode_reg = 0x31a0,
+ .status_reg = 0x31b8,
+ .status_bit = 16,
+ .post_div_shift = 16,
+ .post_div_width = 1,
+ .freq_tbl = pll18_freq_tbl,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "pll18",
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
#define P_PXO 0
#define P_PLL8 1
#define P_PLL3 1
#define P_PLL0 2
#define P_CXO 2
+#define P_PLL14 3
+#define P_PLL18 4
static const u8 gcc_pxo_pll8_map[] = {
[P_PXO] = 0,
@@ -264,6 +299,22 @@ static const char *gcc_pxo_pll8_pll0_map
"pll0_vote",
};
+static const u8 gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
+ [P_PXO] = 0 ,
+ [P_PLL8] = 4,
+ [P_PLL0] = 2,
+ [P_PLL14] = 5,
+ [P_PLL18] = 1,
+};
+
+static const char *gcc_pxo_pll8_pll14_pll18_pll0[] = {
+ "pxo",
+ "pll8_vote",
+ "pll0_vote",
+ "pll14",
+ "pll18",
+};
+
static struct freq_tbl clk_tbl_gsbi_uart[] = {
{ 1843200, P_PLL8, 2, 6, 625 },
{ 3686400, P_PLL8, 2, 12, 625 },
@@ -2269,6 +2320,472 @@ static struct clk_branch ebi2_aon_clk =
},
};
+static const struct freq_tbl clk_tbl_gmac[] = {
+ { 133000000, P_PLL0, 1, 50, 301 },
+ { 266000000, P_PLL0, 1, 127, 382 },
+ { }
+};
+
+static struct clk_dyn_rcg gmac_core1_src = {
+ .ns_reg[0] = 0x3cac,
+ .ns_reg[1] = 0x3cb0,
+ .md_reg[0] = 0x3ca4,
+ .md_reg[1] = 0x3ca8,
+ .bank_reg = 0x3ca0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3ca0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core1_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core1_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 4,
+ .hwcg_reg = 0x3cb4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cb4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core1_clk",
+ .parent_names = (const char *[]){
+ "gmac_core1_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core2_src = {
+ .ns_reg[0] = 0x3ccc,
+ .ns_reg[1] = 0x3cd0,
+ .md_reg[0] = 0x3cc4,
+ .md_reg[1] = 0x3cc8,
+ .bank_reg = 0x3ca0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3cc0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core2_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core2_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 5,
+ .hwcg_reg = 0x3cd4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cd4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core2_clk",
+ .parent_names = (const char *[]){
+ "gmac_core2_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core3_src = {
+ .ns_reg[0] = 0x3cec,
+ .ns_reg[1] = 0x3cf0,
+ .md_reg[0] = 0x3ce4,
+ .md_reg[1] = 0x3ce8,
+ .bank_reg = 0x3ce0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3ce0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core3_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core3_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 6,
+ .hwcg_reg = 0x3cf4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cf4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core3_clk",
+ .parent_names = (const char *[]){
+ "gmac_core3_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core4_src = {
+ .ns_reg[0] = 0x3d0c,
+ .ns_reg[1] = 0x3d10,
+ .md_reg[0] = 0x3d04,
+ .md_reg[1] = 0x3d08,
+ .bank_reg = 0x3d00,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3d00,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core4_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core4_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 7,
+ .hwcg_reg = 0x3d14,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3d14,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core4_clk",
+ .parent_names = (const char *[]){
+ "gmac_core4_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static const struct freq_tbl clk_tbl_nss_tcm[] = {
+ { 266000000, P_PLL0, 3, 0, 0 },
+ { 400000000, P_PLL0, 2, 0, 0 },
+ { }
+};
+
+static struct clk_dyn_rcg nss_tcm_src = {
+ .ns_reg[0] = 0x3dc4,
+ .ns_reg[1] = 0x3dc8,
+ .bank_reg = 0x3dc0,
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 4,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 4,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss_tcm,
+ .clkr = {
+ .enable_reg = 0x3dc0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_tcm_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch nss_tcm_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 14,
+ .clkr = {
+ .enable_reg = 0x3dd0,
+ .enable_mask = BIT(6) | BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_tcm_clk",
+ .parent_names = (const char *[]){
+ "nss_tcm_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static const struct freq_tbl clk_tbl_nss[] = {
+ { 110000000, P_PLL18, 1, 1, 5 },
+ { 275000000, P_PLL18, 2, 0, 0 },
+ { 550000000, P_PLL18, 1, 0, 0 },
+ { 733000000, P_PLL18, 1, 0, 0 },
+ { }
+};
+
+static struct clk_dyn_rcg ubi32_core1_src_clk = {
+ .ns_reg[0] = 0x3d2c,
+ .ns_reg[1] = 0x3d30,
+ .md_reg[0] = 0x3d24,
+ .md_reg[1] = 0x3d28,
+ .bank_reg = 0x3d20,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss,
+ .clkr = {
+ .enable_reg = 0x3d20,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_core1_src_clk",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+ },
+};
+
+static struct clk_dyn_rcg ubi32_core2_src_clk = {
+ .ns_reg[0] = 0x3d4c,
+ .ns_reg[1] = 0x3d50,
+ .md_reg[0] = 0x3d44,
+ .md_reg[1] = 0x3d48,
+ .bank_reg = 0x3d40,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss,
+ .clkr = {
+ .enable_reg = 0x3d40,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_core2_src_clk",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+ },
+};
+
static struct clk_regmap *gcc_ipq806x_clks[] = {
[PLL0] = &pll0.clkr,
[PLL0_VOTE] = &pll0_vote,
@@ -2277,6 +2794,7 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL8_VOTE] = &pll8_vote,
[PLL14] = &pll14.clkr,
[PLL14_VOTE] = &pll14_vote,
+ [PLL18] = &pll18.clkr,
[GSBI1_UART_SRC] = &gsbi1_uart_src.clkr,
[GSBI1_UART_CLK] = &gsbi1_uart_clk.clkr,
[GSBI2_UART_SRC] = &gsbi2_uart_src.clkr,
@@ -2376,6 +2894,18 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL9] = &hfpll0.clkr,
[PLL10] = &hfpll1.clkr,
[PLL12] = &hfpll_l2.clkr,
+ [GMAC_CORE1_CLK_SRC] = &gmac_core1_src.clkr,
+ [GMAC_CORE1_CLK] = &gmac_core1_clk.clkr,
+ [GMAC_CORE2_CLK_SRC] = &gmac_core2_src.clkr,
+ [GMAC_CORE2_CLK] = &gmac_core2_clk.clkr,
+ [GMAC_CORE3_CLK_SRC] = &gmac_core3_src.clkr,
+ [GMAC_CORE3_CLK] = &gmac_core3_clk.clkr,
+ [GMAC_CORE4_CLK_SRC] = &gmac_core4_src.clkr,
+ [GMAC_CORE4_CLK] = &gmac_core4_clk.clkr,
+ [UBI32_CORE1_CLK_SRC] = &ubi32_core1_src_clk.clkr,
+ [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
+ [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
+ [NSSTCM_CLK] = &nss_tcm_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
@@ -2494,6 +3024,48 @@ static const struct qcom_reset_map gcc_i
[USB30_1_PHY_RESET] = { 0x3b58, 0 },
[NSSFB0_RESET] = { 0x3b60, 6 },
[NSSFB1_RESET] = { 0x3b60, 7 },
+ [UBI32_CORE1_CLKRST_CLAMP_RESET] = { 0x3d3c, 3},
+ [UBI32_CORE1_CLAMP_RESET] = { 0x3d3c, 2 },
+ [UBI32_CORE1_AHB_RESET] = { 0x3d3c, 1 },
+ [UBI32_CORE1_AXI_RESET] = { 0x3d3c, 0 },
+ [UBI32_CORE2_CLKRST_CLAMP_RESET] = { 0x3d5c, 3 },
+ [UBI32_CORE2_CLAMP_RESET] = { 0x3d5c, 2 },
+ [UBI32_CORE2_AHB_RESET] = { 0x3d5c, 1 },
+ [UBI32_CORE2_AXI_RESET] = { 0x3d5c, 0 },
+ [GMAC_CORE1_RESET] = { 0x3cbc, 0 },
+ [GMAC_CORE2_RESET] = { 0x3cdc, 0 },
+ [GMAC_CORE3_RESET] = { 0x3cfc, 0 },
+ [GMAC_CORE4_RESET] = { 0x3d1c, 0 },
+ [GMAC_AHB_RESET] = { 0x3e24, 0 },
+ [NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 },
+ [NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 },
+ [NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 },
+ [NSS_CH0_HW_RST_RX_125M_N_RESET] = { 0x3b60, 3 },
+ [NSS_CH0_RST_TX_125M_N_RESET] = { 0x3b60, 4 },
+ [NSS_CH1_RST_RX_CLK_N_RESET] = { 0x3b60, 5 },
+ [NSS_CH1_RST_TX_CLK_N_RESET] = { 0x3b60, 6 },
+ [NSS_CH1_RST_RX_125M_N_RESET] = { 0x3b60, 7 },
+ [NSS_CH1_HW_RST_RX_125M_N_RESET] = { 0x3b60, 8 },
+ [NSS_CH1_RST_TX_125M_N_RESET] = { 0x3b60, 9 },
+ [NSS_CH2_RST_RX_CLK_N_RESET] = { 0x3b60, 10 },
+ [NSS_CH2_RST_TX_CLK_N_RESET] = { 0x3b60, 11 },
+ [NSS_CH2_RST_RX_125M_N_RESET] = { 0x3b60, 12 },
+ [NSS_CH2_HW_RST_RX_125M_N_RESET] = { 0x3b60, 13 },
+ [NSS_CH2_RST_TX_125M_N_RESET] = { 0x3b60, 14 },
+ [NSS_CH3_RST_RX_CLK_N_RESET] = { 0x3b60, 15 },
+ [NSS_CH3_RST_TX_CLK_N_RESET] = { 0x3b60, 16 },
+ [NSS_CH3_RST_RX_125M_N_RESET] = { 0x3b60, 17 },
+ [NSS_CH3_HW_RST_RX_125M_N_RESET] = { 0x3b60, 18 },
+ [NSS_CH3_RST_TX_125M_N_RESET] = { 0x3b60, 19 },
+ [NSS_RST_RX_250M_125M_N_RESET] = { 0x3b60, 20 },
+ [NSS_RST_TX_250M_125M_N_RESET] = { 0x3b60, 21 },
+ [NSS_QSGMII_TXPI_RST_N_RESET] = { 0x3b60, 22 },
+ [NSS_QSGMII_CDR_RST_N_RESET] = { 0x3b60, 23 },
+ [NSS_SGMII2_CDR_RST_N_RESET] = { 0x3b60, 24 },
+ [NSS_SGMII3_CDR_RST_N_RESET] = { 0x3b60, 25 },
+ [NSS_CAL_PRBS_RST_N_RESET] = { 0x3b60, 26 },
+ [NSS_LCKDT_RST_N_RESET] = { 0x3b60, 27 },
+ [NSS_SRDS_N_RESET] = { 0x3b60, 28 },
};
static const struct regmap_config gcc_ipq806x_regmap_config = {
@@ -2522,6 +3094,8 @@ static int gcc_ipq806x_probe(struct plat
{
struct clk *clk;
struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret;
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
@@ -2532,7 +3106,25 @@ static int gcc_ipq806x_probe(struct plat
if (IS_ERR(clk))
return PTR_ERR(clk);
- return qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ if (ret)
+ return ret;
+
+ regmap = dev_get_regmap(dev, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ /* Setup PLL18 static bits */
+ regmap_update_bits(regmap, 0x31a4, 0xffffffc0, 0x40000400);
+ regmap_write(regmap, 0x31b0, 0x3080);
+
+ /* Set GMAC footswitch sleep/wakeup values */
+ regmap_write(regmap, 0x3cb8, 8);
+ regmap_write(regmap, 0x3cd8, 8);
+ regmap_write(regmap, 0x3cf8, 8);
+ regmap_write(regmap, 0x3d18, 8);
+
+ return 0;
}
static int gcc_ipq806x_remove(struct platform_device *pdev)
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -290,5 +290,7 @@
#define UBI32_CORE1_CLK 279
#define UBI32_CORE2_CLK 280
#define EBI2_AON_CLK 281
+#define NSSTCM_CLK_SRC 282
+#define NSSTCM_CLK 283
#endif
--- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -129,4 +129,47 @@
#define USB30_1_PHY_RESET 112
#define NSSFB0_RESET 113
#define NSSFB1_RESET 114
+#define UBI32_CORE1_CLKRST_CLAMP_RESET 115
+#define UBI32_CORE1_CLAMP_RESET 116
+#define UBI32_CORE1_AHB_RESET 117
+#define UBI32_CORE1_AXI_RESET 118
+#define UBI32_CORE2_CLKRST_CLAMP_RESET 119
+#define UBI32_CORE2_CLAMP_RESET 120
+#define UBI32_CORE2_AHB_RESET 121
+#define UBI32_CORE2_AXI_RESET 122
+#define GMAC_CORE1_RESET 123
+#define GMAC_CORE2_RESET 124
+#define GMAC_CORE3_RESET 125
+#define GMAC_CORE4_RESET 126
+#define GMAC_AHB_RESET 127
+#define NSS_CH0_RST_RX_CLK_N_RESET 128
+#define NSS_CH0_RST_TX_CLK_N_RESET 129
+#define NSS_CH0_RST_RX_125M_N_RESET 130
+#define NSS_CH0_HW_RST_RX_125M_N_RESET 131
+#define NSS_CH0_RST_TX_125M_N_RESET 132
+#define NSS_CH1_RST_RX_CLK_N_RESET 133
+#define NSS_CH1_RST_TX_CLK_N_RESET 134
+#define NSS_CH1_RST_RX_125M_N_RESET 135
+#define NSS_CH1_HW_RST_RX_125M_N_RESET 136
+#define NSS_CH1_RST_TX_125M_N_RESET 137
+#define NSS_CH2_RST_RX_CLK_N_RESET 138
+#define NSS_CH2_RST_TX_CLK_N_RESET 139
+#define NSS_CH2_RST_RX_125M_N_RESET 140
+#define NSS_CH2_HW_RST_RX_125M_N_RESET 141
+#define NSS_CH2_RST_TX_125M_N_RESET 142
+#define NSS_CH3_RST_RX_CLK_N_RESET 143
+#define NSS_CH3_RST_TX_CLK_N_RESET 144
+#define NSS_CH3_RST_RX_125M_N_RESET 145
+#define NSS_CH3_HW_RST_RX_125M_N_RESET 146
+#define NSS_CH3_RST_TX_125M_N_RESET 147
+#define NSS_RST_RX_250M_125M_N_RESET 148
+#define NSS_RST_TX_250M_125M_N_RESET 149
+#define NSS_QSGMII_TXPI_RST_N_RESET 150
+#define NSS_QSGMII_CDR_RST_N_RESET 151
+#define NSS_SGMII2_CDR_RST_N_RESET 152
+#define NSS_SGMII3_CDR_RST_N_RESET 153
+#define NSS_CAL_PRBS_RST_N_RESET 154
+#define NSS_LCKDT_RST_N_RESET 155
+#define NSS_SRDS_N_RESET 156
+
#endif

4258
target/linux/ipq806x/patches-3.18/701-stmmac_update_to_4.3.patch
View file

File diff suppressed because it is too large Load diff

146
target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
View file

@ -1,146 +0,0 @@
From e81de9d28bd0421c236df322872e64edf4ee1852 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Mon, 11 May 2015 16:32:09 -0700
Subject: [PATCH 7/8] ARM: dts: qcom: add mdio nodes to ap148 & db149
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 40 ++++++++++++++++++++++++++-
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 46 ++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -19,8 +19,9 @@
};
};
- alias {
+ aliases {
serial0 = &uart4;
+ mdio-gpio0 = &mdio0;
};
chosen {
@@ -68,6 +69,15 @@
bias-bus-hold;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi@16300000 {
@@ -162,6 +172,34 @@
linux,part-probe = "qcom-smem";
};
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -16,6 +16,7 @@
alias {
serial0 = &uart2;
+ mdio-gpio0 = &mdio0;
};
chosen {
@@ -38,6 +39,15 @@
bias-none;
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi2: gsbi@12480000 {
@@ -140,5 +150,44 @@
pcie2: pci@1b900000 {
status = "ok";
};
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+
+ phy6: ethernet-phy@6 {
+ device_type = "ethernet-phy";
+ reg = <6>;
+ };
+
+ phy7: ethernet-phy@7 {
+ device_type = "ethernet-phy";
+ reg = <7>;
+ };
+ };
};
};

216
target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
View file

@ -1,216 +0,0 @@
From cab1f4720e82f2e17eaeed9a9ad9e4f07c742977 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Mon, 11 May 2015 12:29:18 -0700
Subject: [PATCH 8/8] ARM: dts: qcom: add gmac nodes to ipq806x platforms
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 31 ++++++++++++
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 43 ++++++++++++++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 86 ++++++++++++++++++++++++++++++++
3 files changed, 160 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -78,6 +78,16 @@
bias-disable;
};
};
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi@16300000 {
@@ -200,6 +210,31 @@
reg = <4>;
};
};
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -48,6 +48,14 @@
bias-disable;
};
};
+
+ rgmii0_pins: rgmii0_pins {
+ mux {
+ pins = "gpio2", "gpio66";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
gsbi2: gsbi@12480000 {
@@ -189,5 +197,40 @@
reg = <7>;
};
};
+
+ gmac0: ethernet@37000000 {
+ status = "ok";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+ phy-handle = <&phy4>;
+
+ pinctrl-0 = <&rgmii0_pins>;
+ pinctrl-names = "default";
+ };
+
+ gmac1: ethernet@37200000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ gmac2: ethernet@37400000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ phy-handle = <&phy6>;
+ };
+
+ gmac3: ethernet@37600000 {
+ status = "ok";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ phy-handle = <&phy7>;
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -741,6 +741,92 @@
status = "disabled";
};
+ nss_common: syscon@03000000 {
+ compatible = "syscon";
+ reg = <0x03000000 0x0000FFFF>;
+ };
+
+ qsgmii_csr: syscon@1bb00000 {
+ compatible = "syscon";
+ reg = <0x1bb00000 0x000001FF>;
+ };
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE2_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE2_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE3_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE3_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE4_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE4_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
};
sfpb_mutex: sfpb-mutex {

31
target/linux/ipq806x/patches-3.18/709-stmac-platform-add-support-for-retreiving-mac-from-m.patch
View file

@ -1,31 +0,0 @@
From 5bf2dabde1fa3af0c9082b42b6847ef3fd198b13 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 9 Aug 2015 12:53:55 +0200
Subject: [PATCH] stmac: platform: add support for retreiving mac from mtd
---
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -116,6 +116,19 @@ stmmac_probe_config_dt(struct platform_d
return ERR_PTR(-ENOMEM);
*mac = of_get_mac_address(np);
+ if (!*mac) {
+ u8 mtd_mac[ETH_ALEN];
+ int ret;
+
+ ret = of_get_mac_address_mtd(np, mtd_mac);
+ if (ret == -EPROBE_DEFER)
+ return ERR_PTR(ret);
+
+ if (is_valid_ether_addr(mtd_mac))
+ *mac = devm_kmemdup(&pdev->dev, mtd_mac, ETH_ALEN,
+ GFP_KERNEL);
+ }
+
plat->interface = of_get_phy_mode(np);
/* Get max speed of operation from device tree */

117
target/linux/ipq806x/patches-3.18/710-stmmac-fix-ipq806x-DMA-configuration.patch
View file

@ -1,117 +0,0 @@
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -259,6 +259,7 @@ static int ipq806x_gmac_probe(struct pla
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
+ struct stmmac_dma_cfg *dma_cfg;
struct device *dev = &pdev->dev;
struct ipq806x_gmac *gmac;
int val;
@@ -348,6 +349,17 @@ static int ipq806x_gmac_probe(struct pla
plat_dat->bsp_priv = gmac;
plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
+ dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
+ GFP_KERNEL);
+
+ dma_cfg->pbl = 32;
+ dma_cfg->aal = 1;
+ dma_cfg->burst_len = DMA_AXI_BLEN_16 |
+ (7 << DMA_AXI_RD_OSR_LMT_SHIFT) |
+ (7 << DMA_AXI_WR_OSR_LMT_SHIFT);
+
+ plat_dat->dma_cfg = dma_cfg;
+
return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -73,6 +73,9 @@
| DMA_AXI_BLEN_32 | DMA_AXI_BLEN_64 \
| DMA_AXI_BLEN_128 | DMA_AXI_BLEN_256)
+#define DMA_AXI_RD_OSR_LMT_SHIFT 16
+#define DMA_AXI_WR_OSR_LMT_SHIFT 20
+
/* Platfrom data for platform device structure's platform_data field */
struct stmmac_mdio_bus_data {
@@ -88,6 +91,7 @@ struct stmmac_mdio_bus_data {
struct stmmac_dma_cfg {
int pbl;
+ int aal;
int fixed_burst;
int mixed_burst;
int burst_len;
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -31,7 +31,8 @@
#include "dwmac_dma.h"
static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds,
+ int aal)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int limit;
@@ -62,6 +63,10 @@ static int dwmac1000_dma_init(void __iom
value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
(pbl << DMA_BUS_MODE_RPBL_SHIFT));
+ /* Address Aligned Beats */
+ if (aal)
+ value |= DMA_BUS_MODE_AAL;
+
/* Set the Fixed burst mode */
if (fb)
value |= DMA_BUS_MODE_FB;
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -352,7 +352,7 @@ extern const struct stmmac_desc_ops ndes
struct stmmac_dma_ops {
/* DMA core initialization */
int (*init) (void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds);
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds, int aal);
/* Dump DMA registers */
void (*dump_regs) (void __iomem *ioaddr);
/* Set tx/rx threshold in the csr6 register
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -33,7 +33,8 @@
#include "dwmac_dma.h"
static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds,
+ int aal)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int limit;
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1639,9 +1639,11 @@ static int stmmac_init_dma_engine(struct
int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_len = 0;
int mixed_burst = 0;
int atds = 0;
+ int aal = 0;
if (priv->plat->dma_cfg) {
pbl = priv->plat->dma_cfg->pbl;
+ aal = priv->plat->dma_cfg->aal;
fixed_burst = priv->plat->dma_cfg->fixed_burst;
mixed_burst = priv->plat->dma_cfg->mixed_burst;
burst_len = priv->plat->dma_cfg->burst_len;
@@ -1652,7 +1654,7 @@ static int stmmac_init_dma_engine(struct
return priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
burst_len, priv->dma_tx_phy,
- priv->dma_rx_phy, atds);
+ priv->dma_rx_phy, atds, aal);
}
/**

19
target/linux/ipq806x/patches-4.1/021-add-ap148-partitions.patch
View file

@ -1,19 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -77,15 +77,7 @@
spi-max-frequency = <50000000>;
reg = <0>;
- partition@0 {
- label = "rootfs";
- reg = <0x0 0x1000000>;
- };
-
- partition@1 {
- label = "scratch";
- reg = <0x1000000 0x1000000>;
- };
+ linux,part-probe = "qcom-smem";
};
};
};

14
target/linux/ipq806x/patches-4.1/024-ap148-add-memory-node.patch
View file

@ -1,14 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -4,6 +4,11 @@
model = "Qualcomm IPQ8064/AP148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;

167
target/linux/ipq806x/patches-4.1/030-hwspinlock-core-add-device-tree-support.patch
View file

@ -1,167 +0,0 @@
From fb7737e949e31d8a71acee6bbb670f32dbd2a2c0 Mon Sep 17 00:00:00 2001
From: Suman Anna <s-anna@ti.com>
Date: Wed, 4 Mar 2015 20:01:14 -0600
Subject: [PATCH] hwspinlock/core: add device tree support
This patch adds a new OF-friendly API of_hwspin_lock_get_id()
for hwspinlock clients to use/request locks from a hwspinlock
device instantiated through a device-tree blob. This new API
can be used by hwspinlock clients to get the id for a specific
lock using the phandle + args specifier, so that it can be
requested using the available hwspin_lock_request_specific()
API.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
[small comment clarification]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
Documentation/hwspinlock.txt | 10 +++++
drivers/hwspinlock/hwspinlock_core.c | 79 ++++++++++++++++++++++++++++++++++++
include/linux/hwspinlock.h | 7 ++++
3 files changed, 96 insertions(+)
--- a/Documentation/hwspinlock.txt
+++ b/Documentation/hwspinlock.txt
@@ -48,6 +48,16 @@ independent, drivers.
ids for predefined purposes.
Should be called from a process context (might sleep).
+ int of_hwspin_lock_get_id(struct device_node *np, int index);
+ - retrieve the global lock id for an OF phandle-based specific lock.
+ This function provides a means for DT users of a hwspinlock module
+ to get the global lock id of a specific hwspinlock, so that it can
+ be requested using the normal hwspin_lock_request_specific() API.
+ The function returns a lock id number on success, -EPROBE_DEFER if
+ the hwspinlock device is not yet registered with the core, or other
+ error values.
+ Should be called from a process context (might sleep).
+
int hwspin_lock_free(struct hwspinlock *hwlock);
- free a previously-assigned hwspinlock; returns 0 on success, or an
appropriate error code on failure (e.g. -EINVAL if the hwspinlock
--- a/drivers/hwspinlock/hwspinlock_core.c
+++ b/drivers/hwspinlock/hwspinlock_core.c
@@ -27,6 +27,7 @@
#include <linux/hwspinlock.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
+#include <linux/of.h>
#include "hwspinlock_internal.h"
@@ -257,6 +258,84 @@ void __hwspin_unlock(struct hwspinlock *
}
EXPORT_SYMBOL_GPL(__hwspin_unlock);
+/**
+ * of_hwspin_lock_simple_xlate - translate hwlock_spec to return a lock id
+ * @bank: the hwspinlock device bank
+ * @hwlock_spec: hwlock specifier as found in the device tree
+ *
+ * This is a simple translation function, suitable for hwspinlock platform
+ * drivers that only has a lock specifier length of 1.
+ *
+ * Returns a relative index of the lock within a specified bank on success,
+ * or -EINVAL on invalid specifier cell count.
+ */
+static inline int
+of_hwspin_lock_simple_xlate(const struct of_phandle_args *hwlock_spec)
+{
+ if (WARN_ON(hwlock_spec->args_count != 1))
+ return -EINVAL;
+
+ return hwlock_spec->args[0];
+}
+
+/**
+ * of_hwspin_lock_get_id() - get lock id for an OF phandle-based specific lock
+ * @np: device node from which to request the specific hwlock
+ * @index: index of the hwlock in the list of values
+ *
+ * This function provides a means for DT users of the hwspinlock module to
+ * get the global lock id of a specific hwspinlock using the phandle of the
+ * hwspinlock device, so that it can be requested using the normal
+ * hwspin_lock_request_specific() API.
+ *
+ * Returns the global lock id number on success, -EPROBE_DEFER if the hwspinlock
+ * device is not yet registered, -EINVAL on invalid args specifier value or an
+ * appropriate error as returned from the OF parsing of the DT client node.
+ */
+int of_hwspin_lock_get_id(struct device_node *np, int index)
+{
+ struct of_phandle_args args;
+ struct hwspinlock *hwlock;
+ struct radix_tree_iter iter;
+ void **slot;
+ int id;
+ int ret;
+
+ ret = of_parse_phandle_with_args(np, "hwlocks", "#hwlock-cells", index,
+ &args);
+ if (ret)
+ return ret;
+
+ /* Find the hwspinlock device: we need its base_id */
+ ret = -EPROBE_DEFER;
+ rcu_read_lock();
+ radix_tree_for_each_slot(slot, &hwspinlock_tree, &iter, 0) {
+ hwlock = radix_tree_deref_slot(slot);
+ if (unlikely(!hwlock))
+ continue;
+
+ if (hwlock->bank->dev->of_node == args.np) {
+ ret = 0;
+ break;
+ }
+ }
+ rcu_read_unlock();
+ if (ret < 0)
+ goto out;
+
+ id = of_hwspin_lock_simple_xlate(&args);
+ if (id < 0 || id >= hwlock->bank->num_locks) {
+ ret = -EINVAL;
+ goto out;
+ }
+ id += hwlock->bank->base_id;
+
+out:
+ of_node_put(args.np);
+ return ret ? ret : id;
+}
+EXPORT_SYMBOL_GPL(of_hwspin_lock_get_id);
+
static int hwspin_lock_register_single(struct hwspinlock *hwlock, int id)
{
struct hwspinlock *tmp;
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -26,6 +26,7 @@
#define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */
struct device;
+struct device_node;
struct hwspinlock;
struct hwspinlock_device;
struct hwspinlock_ops;
@@ -66,6 +67,7 @@ int hwspin_lock_unregister(struct hwspin
struct hwspinlock *hwspin_lock_request(void);
struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
int hwspin_lock_free(struct hwspinlock *hwlock);
+int of_hwspin_lock_get_id(struct device_node *np, int index);
int hwspin_lock_get_id(struct hwspinlock *hwlock);
int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int,
unsigned long *);
@@ -120,6 +122,11 @@ void __hwspin_unlock(struct hwspinlock *
{
}
+static inline int of_hwspin_lock_get_id(struct device_node *np, int index)
+{
+ return 0;
+}
+
static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
{
return 0;

234
target/linux/ipq806x/patches-4.1/031-hwspinlock-qcom-Add-support-for-Qualcomm-HW-Mutex-bl.patch
View file

@ -1,234 +0,0 @@
From 19a0f61224d2d91860fa8291ab63cb104ee86bdd Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Date: Tue, 24 Mar 2015 10:11:05 -0700
Subject: [PATCH] hwspinlock: qcom: Add support for Qualcomm HW Mutex block
Add driver for Qualcomm Hardware Mutex block found in many Qualcomm
SoCs.
Based on initial effort by Kumar Gala <galak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
drivers/hwspinlock/Kconfig | 12 +++
drivers/hwspinlock/Makefile | 1 +
drivers/hwspinlock/qcom_hwspinlock.c | 181 +++++++++++++++++++++++++++++++++++
3 files changed, 194 insertions(+)
create mode 100644 drivers/hwspinlock/qcom_hwspinlock.c
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -18,6 +18,18 @@ config HWSPINLOCK_OMAP
If unsure, say N.
+config HWSPINLOCK_QCOM
+ tristate "Qualcomm Hardware Spinlock device"
+ depends on ARCH_QCOM
+ select HWSPINLOCK
+ select MFD_SYSCON
+ help
+ Say y here to support the Qualcomm Hardware Mutex functionality, which
+ provides a synchronisation mechanism for the various processors on
+ the SoC.
+
+ If unsure, say N.
+
config HSEM_U8500
tristate "STE Hardware Semaphore functionality"
depends on ARCH_U8500
--- a/drivers/hwspinlock/Makefile
+++ b/drivers/hwspinlock/Makefile
@@ -4,4 +4,5 @@
obj-$(CONFIG_HWSPINLOCK) += hwspinlock_core.o
obj-$(CONFIG_HWSPINLOCK_OMAP) += omap_hwspinlock.o
+obj-$(CONFIG_HWSPINLOCK_QCOM) += qcom_hwspinlock.o
obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o
--- /dev/null
+++ b/drivers/hwspinlock/qcom_hwspinlock.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, Sony Mobile Communications AB
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwspinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include "hwspinlock_internal.h"
+
+#define QCOM_MUTEX_APPS_PROC_ID 1
+#define QCOM_MUTEX_NUM_LOCKS 32
+
+static int qcom_hwspinlock_trylock(struct hwspinlock *lock)
+{
+ struct regmap_field *field = lock->priv;
+ u32 lock_owner;
+ int ret;
+
+ ret = regmap_field_write(field, QCOM_MUTEX_APPS_PROC_ID);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_read(field, &lock_owner);
+ if (ret)
+ return ret;
+
+ return lock_owner == QCOM_MUTEX_APPS_PROC_ID;
+}
+
+static void qcom_hwspinlock_unlock(struct hwspinlock *lock)
+{
+ struct regmap_field *field = lock->priv;
+ u32 lock_owner;
+ int ret;
+
+ ret = regmap_field_read(field, &lock_owner);
+ if (ret) {
+ pr_err("%s: unable to query spinlock owner\n", __func__);
+ return;
+ }
+
+ if (lock_owner != QCOM_MUTEX_APPS_PROC_ID) {
+ pr_err("%s: spinlock not owned by us (actual owner is %d)\n",
+ __func__, lock_owner);
+ }
+
+ ret = regmap_field_write(field, 0);
+ if (ret)
+ pr_err("%s: failed to unlock spinlock\n", __func__);
+}
+
+static const struct hwspinlock_ops qcom_hwspinlock_ops = {
+ .trylock = qcom_hwspinlock_trylock,
+ .unlock = qcom_hwspinlock_unlock,
+};
+
+static const struct of_device_id qcom_hwspinlock_of_match[] = {
+ { .compatible = "qcom,sfpb-mutex" },
+ { .compatible = "qcom,tcsr-mutex" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_hwspinlock_of_match);
+
+static int qcom_hwspinlock_probe(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank;
+ struct device_node *syscon;
+ struct reg_field field;
+ struct regmap *regmap;
+ size_t array_size;
+ u32 stride;
+ u32 base;
+ int ret;
+ int i;
+
+ syscon = of_parse_phandle(pdev->dev.of_node, "syscon", 0);
+ if (!syscon) {
+ dev_err(&pdev->dev, "no syscon property\n");
+ return -ENODEV;
+ }
+
+ regmap = syscon_node_to_regmap(syscon);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 1, &base);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in syscon\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "syscon", 2, &stride);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no stride syscon\n");
+ return -EINVAL;
+ }
+
+ array_size = QCOM_MUTEX_NUM_LOCKS * sizeof(struct hwspinlock);
+ bank = devm_kzalloc(&pdev->dev, sizeof(*bank) + array_size, GFP_KERNEL);
+ if (!bank)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, bank);
+
+ for (i = 0; i < QCOM_MUTEX_NUM_LOCKS; i++) {
+ field.reg = base + i * stride;
+ field.lsb = 0;
+ field.msb = 32;
+
+ bank->lock[i].priv = devm_regmap_field_alloc(&pdev->dev,
+ regmap, field);
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
+ ret = hwspin_lock_register(bank, &pdev->dev, &qcom_hwspinlock_ops,
+ 0, QCOM_MUTEX_NUM_LOCKS);
+ if (ret)
+ pm_runtime_disable(&pdev->dev);
+
+ return ret;
+}
+
+static int qcom_hwspinlock_remove(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = hwspin_lock_unregister(bank);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver qcom_hwspinlock_driver = {
+ .probe = qcom_hwspinlock_probe,
+ .remove = qcom_hwspinlock_remove,
+ .driver = {
+ .name = "qcom_hwspinlock",
+ .of_match_table = qcom_hwspinlock_of_match,
+ },
+};
+
+static int __init qcom_hwspinlock_init(void)
+{
+ return platform_driver_register(&qcom_hwspinlock_driver);
+}
+/* board init code might need to reserve hwspinlocks for predefined purposes */
+postcore_initcall(qcom_hwspinlock_init);
+
+static void __exit qcom_hwspinlock_exit(void)
+{
+ platform_driver_unregister(&qcom_hwspinlock_driver);
+}
+module_exit(qcom_hwspinlock_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hardware spinlock driver for Qualcomm SoCs");

26
target/linux/ipq806x/patches-4.1/032-hwspinlock-qcom-Correct-msb-in-regmap_field.patch
View file

@ -1,26 +0,0 @@
From bd5717a4632cdecafe82d03de7dcb3b1876e2828 Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Date: Fri, 26 Jun 2015 14:47:21 -0700
Subject: [PATCH] hwspinlock: qcom: Correct msb in regmap_field
msb of the regmap_field was mistakenly given the value 32, to set all bits
in the regmap update mask; although incorrect this worked until 921cc294,
where the mask calculation was corrected.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
drivers/hwspinlock/qcom_hwspinlock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hwspinlock/qcom_hwspinlock.c
+++ b/drivers/hwspinlock/qcom_hwspinlock.c
@@ -123,7 +123,7 @@ static int qcom_hwspinlock_probe(struct
for (i = 0; i < QCOM_MUTEX_NUM_LOCKS; i++) {
field.reg = base + i * stride;
field.lsb = 0;
- field.msb = 32;
+ field.msb = 31;
bank->lock[i].priv = devm_regmap_field_alloc(&pdev->dev,
regmap, field);

82
target/linux/ipq806x/patches-4.1/034-soc-qcom-Add-device-tree-binding-for-SMEM.patch
View file

@ -1,82 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v2,1/2] soc: qcom: Add device tree binding for SMEM
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
X-Patchwork-Id: 6202201
Message-Id: <1428795178-24312-1-git-send-email-bjorn.andersson@sonymobile.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>, Jeffrey Hugo <jhugo@codeaurora.org>,
Andry Gross <agross@codeaurora.org>
Cc: <devicetree@vger.kernel.org>,
linux-arm-msm <linux-arm-msm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Date: Sat, 11 Apr 2015 16:32:57 -0700
Add device tree binding documentation for the Qualcom Shared Memory
manager.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
Changes since v1:
- None
.../devicetree/bindings/soc/qcom/qcom,smem.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt
@@ -0,0 +1,49 @@
+Qualcomm Shared Memory binding
+
+This binding describes the Qualcomm Shared Memory, used to share data between
+various subsystems and OSes in Qualcomm platforms.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be:
+ "qcom,smem"
+
+- memory-region:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: handle to memory reservation for main smem memory region.
+
+- reg:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: base address and size pair for any additional memory areas
+ of the shared memory.
+
+- hwspinlocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to a hwspinlock used to protect allocations from
+ the shared memory
+
+= EXAMPLE
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_region: smem@fa00000 {
+ reg = <0xfa00000 0x200000>;
+ no-map;
+ };
+ };
+
+ smem@fa00000 {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_region>;
+ reg = <0xfc428000 0x4000>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };

841
target/linux/ipq806x/patches-4.1/035-soc-qcom-Add-Shared-Memory-Manager-driver.patch
View file

@ -1,841 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v2,2/2] soc: qcom: Add Shared Memory Manager driver
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
X-Patchwork-Id: 6202211
Message-Id: <1428795178-24312-2-git-send-email-bjorn.andersson@sonymobile.com>
To: Kumar Gala <galak@codeaurora.org>, Andy Gross <agross@codeaurora.org>,
David Brown <davidb@codeaurora.org>, Jeffrey Hugo <jhugo@codeaurora.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<linux-soc@vger.kernel.org>
Date: Sat, 11 Apr 2015 16:32:58 -0700
The Shared Memory Manager driver implements an interface for allocating
and accessing items in the memory area shared among all of the
processors in a Qualcomm platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Tested-by: Andy Gross <agross@codeaurora.org>
---
Changes since v1:
- ioremapping the regions nocache
- improved documentation of the two regions of partitions
- corrected free space check in private allocator
drivers/soc/qcom/Kconfig | 7 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/smem.c | 768 ++++++++++++++++++++++++++++++++++++++++++
include/linux/soc/qcom/smem.h | 14 +
4 files changed, 790 insertions(+)
create mode 100644 drivers/soc/qcom/smem.c
create mode 100644 include/linux/soc/qcom/smem.h
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -10,3 +10,10 @@ config QCOM_GSBI
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
+config QCOM_SMEM
+ tristate "Qualcomm Shared Memory Manager (SMEM)"
+ depends on ARCH_QCOM
+ help
+ Say y here to enable support for the Qualcomm Shared Memory Manager.
+ The driver provides an interface to items in a heap shared among all
+ processors in a Qualcomm platform.
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_SMEM) += smem.o
--- /dev/null
+++ b/drivers/soc/qcom/smem.c
@@ -0,0 +1,768 @@
+/*
+ * Copyright (c) 2015, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwspinlock.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+
+/*
+ * The Qualcomm shared memory system is a allocate only heap structure that
+ * consists of one of more memory areas that can be accessed by the processors
+ * in the SoC.
+ *
+ * All systems contains a global heap, accessible by all processors in the SoC,
+ * with a table of contents data structure (@smem_header) at the beginning of
+ * the main shared memory block.
+ *
+ * The global header contains metadata for allocations as well as a fixed list
+ * of 512 entries (@smem_global_entry) that can be initialized to reference
+ * parts of the shared memory space.
+ *
+ *
+ * In addition to this global heap a set of "private" heaps can be set up at
+ * boot time with access restrictions so that only certain processor pairs can
+ * access the data.
+ *
+ * These partitions are referenced from an optional partition table
+ * (@smem_ptable), that is found 4kB from the end of the main smem region. The
+ * partition table entries (@smem_ptable_entry) lists the involved processors
+ * (or hosts) and their location in the main shared memory region.
+ *
+ * Each partition starts with a header (@smem_partition_header) that identifies
+ * the partition and holds properties for the two internal memory regions. The
+ * two regions are cached and non-cached memory respectively. Each region
+ * contain a link list of allocation headers (@smem_private_entry) followed by
+ * their data.
+ *
+ * Items in the non-cached region are allocated from the start of the partition
+ * while items in the cached region are allocated from the end. The free area
+ * is hence the region between the cached and non-cached offsets.
+ *
+ *
+ * To synchronize allocations in the shared memory heaps a remote spinlock must
+ * be held - currently lock number 3 of the sfpb or tcsr is used for this on all
+ * platforms.
+ *
+ */
+
+/**
+ * struct smem_proc_comm - proc_comm communication struct (legacy)
+ * @command: current command to be executed
+ * @status: status of the currently requested command
+ * @params: parameters to the command
+ */
+struct smem_proc_comm {
+ u32 command;
+ u32 status;
+ u32 params[2];
+};
+
+/**
+ * struct smem_global_entry - entry to reference smem items on the heap
+ * @allocated: boolean to indicate if this entry is used
+ * @offset: offset to the allocated space
+ * @size: size of the allocated space, 8 byte aligned
+ * @aux_base: base address for the memory region used by this unit, or 0 for
+ * the default region. bits 0,1 are reserved
+ */
+struct smem_global_entry {
+ u32 allocated;
+ u32 offset;
+ u32 size;
+ u32 aux_base; /* bits 1:0 reserved */
+};
+#define AUX_BASE_MASK 0xfffffffc
+
+/**
+ * struct smem_header - header found in beginning of primary smem region
+ * @proc_comm: proc_comm communication interface (legacy)
+ * @version: array of versions for the various subsystems
+ * @initialized: boolean to indicate that smem is initialized
+ * @free_offset: index of the first unallocated byte in smem
+ * @available: number of bytes available for allocation
+ * @reserved: reserved field, must be 0
+ * toc: array of references to items
+ */
+struct smem_header {
+ struct smem_proc_comm proc_comm[4];
+ u32 version[32];
+ u32 initialized;
+ u32 free_offset;
+ u32 available;
+ u32 reserved;
+ struct smem_global_entry toc[];
+};
+
+/**
+ * struct smem_ptable_entry - one entry in the @smem_ptable list
+ * @offset: offset, within the main shared memory region, of the partition
+ * @size: size of the partition
+ * @flags: flags for the partition (currently unused)
+ * @host0: first processor/host with access to this partition
+ * @host1: second processor/host with access to this partition
+ * @reserved: reserved entries for later use
+ */
+struct smem_ptable_entry {
+ u32 offset;
+ u32 size;
+ u32 flags;
+ u16 host0;
+ u16 host1;
+ u32 reserved[8];
+};
+
+/**
+ * struct smem_ptable - partition table for the private partitions
+ * @magic: magic number, must be SMEM_PTABLE_MAGIC
+ * @version: version of the partition table
+ * @num_entries: number of partitions in the table
+ * @reserved: for now reserved entries
+ * @entry: list of @smem_ptable_entry for the @num_entries partitions
+ */
+struct smem_ptable {
+ u32 magic;
+ u32 version;
+ u32 num_entries;
+ u32 reserved[5];
+ struct smem_ptable_entry entry[];
+};
+#define SMEM_PTABLE_MAGIC 0x434f5424 /* "$TOC" */
+
+/**
+ * struct smem_partition_header - header of the partitions
+ * @magic: magic number, must be SMEM_PART_MAGIC
+ * @host0: first processor/host with access to this partition
+ * @host1: second processor/host with access to this partition
+ * @size: size of the partition
+ * @offset_free_uncached: offset to the first free byte of uncached memory in
+ * this partition
+ * @offset_free_cached: offset to the first free byte of cached memory in this
+ * partition
+ * @reserved: for now reserved entries
+ */
+struct smem_partition_header {
+ u32 magic;
+ u16 host0;
+ u16 host1;
+ u32 size;
+ u32 offset_free_uncached;
+ u32 offset_free_cached;
+ u32 reserved[3];
+};
+#define SMEM_PART_MAGIC 0x54525024 /* "$PRT" */
+
+/**
+ * struct smem_private_entry - header of each item in the private partition
+ * @canary: magic number, must be SMEM_PRIVATE_CANARY
+ * @item: identifying number of the smem item
+ * @size: size of the data, including padding bytes
+ * @padding_data: number of bytes of padding of data
+ * @padding_hdr: number of bytes of padding between the header and the data
+ * @reserved: for now reserved entry
+ */
+struct smem_private_entry {
+ u16 canary;
+ u16 item;
+ u32 size; /* includes padding bytes */
+ u16 padding_data;
+ u16 padding_hdr;
+ u32 reserved;
+};
+#define SMEM_PRIVATE_CANARY 0xa5a5
+
+/*
+ * Item 3 of the global heap contains an array of versions for the various
+ * software components in the SoC. We verify that the boot loader version is
+ * what the expected version (SMEM_EXPECTED_VERSION) as a sanity check.
+ */
+#define SMEM_ITEM_VERSION 3
+#define SMEM_MASTER_SBL_VERSION_INDEX 7
+#define SMEM_EXPECTED_VERSION 11
+
+/*
+ * The first 8 items are only to be allocated by the boot loader while
+ * initializing the heap.
+ */
+#define SMEM_ITEM_LAST_FIXED 8
+
+/* Highest accepted item number, for both global and private heaps */
+#define SMEM_ITEM_LAST 512
+
+/* Processor/host identifier for the application processor */
+#define SMEM_HOST_APPS 0
+
+/* Max number of processors/hosts in a system */
+#define SMEM_HOST_COUNT 7
+
+/**
+ * struct smem_region - representation of a chunk of memory used for smem
+ * @aux_base: identifier of aux_mem base
+ * @virt_base: virtual base address of memory with this aux_mem identifier
+ * @size: size of the memory region
+ */
+struct smem_region {
+ u32 aux_base;
+ void __iomem *virt_base;
+ size_t size;
+};
+
+/**
+ * struct qcom_smem - device data for the smem device
+ * @dev: device pointer
+ * @hwlock: reference to a hwspinlock
+ * @partitions: list of pointers to partitions affecting the current
+ * processor/host
+ * @num_regions: number of @regions
+ * @regions: list of the memory regions defining the shared memory
+ */
+struct qcom_smem {
+ struct device *dev;
+
+ struct hwspinlock *hwlock;
+
+ struct smem_partition_header *partitions[SMEM_HOST_COUNT];
+
+ unsigned num_regions;
+ struct smem_region regions[0];
+};
+
+/* Pointer to the one and only smem handle */
+static struct qcom_smem *__smem;
+
+/* Timeout (ms) for the trylock of remote spinlocks */
+#define HWSPINLOCK_TIMEOUT 1000
+
+static int qcom_smem_alloc_private(struct qcom_smem *smem,
+ unsigned host,
+ unsigned item,
+ size_t size)
+{
+ struct smem_partition_header *phdr;
+ struct smem_private_entry *hdr;
+ size_t alloc_size;
+ void *p;
+
+ /* We're not going to find it if there's no matching partition */
+ if (host >= SMEM_HOST_COUNT || !smem->partitions[host])
+ return -ENOENT;
+
+ phdr = smem->partitions[host];
+
+ p = (void *)phdr + sizeof(*phdr);
+ while (p < (void *)phdr + phdr->offset_free_uncached) {
+ hdr = p;
+
+ if (hdr->canary != SMEM_PRIVATE_CANARY) {
+ dev_err(smem->dev,
+ "Found invalid canary in host %d partition\n",
+ host);
+ return -EINVAL;
+ }
+
+ if (hdr->item == item)
+ return -EEXIST;
+
+ p += sizeof(*hdr) + hdr->padding_hdr + hdr->size;
+ }
+
+ /* Check that we don't grow into the cached region */
+ alloc_size = sizeof(*hdr) + ALIGN(size, 8);
+ if (p + alloc_size >= (void *)phdr + phdr->offset_free_cached) {
+ dev_err(smem->dev, "Out of memory\n");
+ return -ENOSPC;
+ }
+
+ hdr = p;
+ hdr->canary = SMEM_PRIVATE_CANARY;
+ hdr->item = item;
+ hdr->size = ALIGN(size, 8);
+ hdr->padding_data = hdr->size - size;
+ hdr->padding_hdr = 0;
+
+ /*
+ * Ensure the header is written before we advance the free offset, so
+ * that remote processors that does not take the remote spinlock still
+ * gets a consistent view of the linked list.
+ */
+ wmb();
+ phdr->offset_free_uncached += alloc_size;
+
+ return 0;
+}
+
+static int qcom_smem_alloc_global(struct qcom_smem *smem,
+ unsigned item,
+ size_t size)
+{
+ struct smem_header *header;
+ struct smem_global_entry *entry;
+
+ if (WARN_ON(item >= SMEM_ITEM_LAST))
+ return -EINVAL;
+
+ header = smem->regions[0].virt_base;
+ entry = &header->toc[item];
+ if (entry->allocated)
+ return -EEXIST;
+
+ size = ALIGN(size, 8);
+ if (WARN_ON(size > header->available))
+ return -ENOMEM;
+
+ entry->offset = header->free_offset;
+ entry->size = size;
+
+ /*
+ * Ensure the header is consistent before we mark the item allocated,
+ * so that remote processors will get a consistent view of the item
+ * even though they do not take the spinlock on read.
+ */
+ wmb();
+ entry->allocated = 1;
+
+ header->free_offset += size;
+ header->available -= size;
+
+ return 0;
+}
+
+/**
+ * qcom_smem_alloc - allocate space for a smem item
+ * @host: remote processor id, or -1
+ * @item: smem item handle
+ * @size: number of bytes to be allocated
+ *
+ * Allocate space for a given smem item of size @size, given that the item is
+ * not yet allocated.
+ */
+int qcom_smem_alloc(unsigned host, unsigned item, size_t size)
+{
+ unsigned long flags;
+ int ret;
+
+ if (!__smem)
+ return -EPROBE_DEFER;
+
+ if (item < SMEM_ITEM_LAST_FIXED) {
+ dev_err(__smem->dev,
+ "Rejecting allocation of static entry %d\n", item);
+ return -EINVAL;
+ }
+
+ ret = hwspin_lock_timeout_irqsave(__smem->hwlock,
+ HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret)
+ return ret;
+
+ ret = qcom_smem_alloc_private(__smem, host, item, size);
+ if (ret == -ENOENT)
+ ret = qcom_smem_alloc_global(__smem, item, size);
+
+ hwspin_unlock_irqrestore(__smem->hwlock, &flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_smem_alloc);
+
+static int qcom_smem_get_global(struct qcom_smem *smem,
+ unsigned item,
+ void **ptr,
+ size_t *size)
+{
+ struct smem_header *header;
+ struct smem_region *area;
+ struct smem_global_entry *entry;
+ u32 aux_base;
+ unsigned i;
+
+ if (WARN_ON(item >= SMEM_ITEM_LAST))
+ return -EINVAL;
+
+ header = smem->regions[0].virt_base;
+ entry = &header->toc[item];
+ if (!entry->allocated)
+ return -ENXIO;
+
+ if (ptr != NULL) {
+ aux_base = entry->aux_base & AUX_BASE_MASK;
+
+ for (i = 0; i < smem->num_regions; i++) {
+ area = &smem->regions[i];
+
+ if (area->aux_base == aux_base || !aux_base) {
+ *ptr = area->virt_base + entry->offset;
+ break;
+ }
+ }
+ }
+ if (size != NULL)
+ *size = entry->size;
+
+ return 0;
+}
+
+static int qcom_smem_get_private(struct qcom_smem *smem,
+ unsigned host,
+ unsigned item,
+ void **ptr,
+ size_t *size)
+{
+ struct smem_partition_header *phdr;
+ struct smem_private_entry *hdr;
+ void *p;
+
+ /* We're not going to find it if there's no matching partition */
+ if (host >= SMEM_HOST_COUNT || !smem->partitions[host])
+ return -ENOENT;
+
+ phdr = smem->partitions[host];
+
+ p = (void *)phdr + sizeof(*phdr);
+ while (p < (void *)phdr + phdr->offset_free_uncached) {
+ hdr = p;
+
+ if (hdr->canary != SMEM_PRIVATE_CANARY) {
+ dev_err(smem->dev,
+ "Found invalid canary in host %d partition\n",
+ host);
+ return -EINVAL;
+ }
+
+ if (hdr->item == item) {
+ if (ptr != NULL)
+ *ptr = p + sizeof(*hdr) + hdr->padding_hdr;
+
+ if (size != NULL)
+ *size = hdr->size - hdr->padding_data;
+
+ return 0;
+ }
+
+ p += sizeof(*hdr) + hdr->padding_hdr + hdr->size;
+ }
+
+ return -ENOENT;
+}
+
+/**
+ * qcom_smem_get - resolve ptr of size of a smem item
+ * @host: the remote processor, or -1
+ * @item: smem item handle
+ * @ptr: pointer to be filled out with address of the item
+ * @size: pointer to be filled out with size of the item
+ *
+ * Looks up pointer and size of a smem item.
+ */
+int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size)
+{
+ unsigned long flags;
+ int ret;
+
+ if (!__smem)
+ return -EPROBE_DEFER;
+
+ ret = hwspin_lock_timeout_irqsave(__smem->hwlock,
+ HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret)
+ return ret;
+
+ ret = qcom_smem_get_private(__smem, host, item, ptr, size);
+ if (ret == -ENOENT)
+ ret = qcom_smem_get_global(__smem, item, ptr, size);
+
+ hwspin_unlock_irqrestore(__smem->hwlock, &flags);
+ return ret;
+
+}
+EXPORT_SYMBOL(qcom_smem_get);
+
+/**
+ * qcom_smem_get_free_space - retrieve amont of free space in a partition
+ * @host: the remote processor identifing a partition, or -1
+ *
+ * To be used by smem clients as a quick way to determine if any new
+ * allocations has been made.
+ */
+int qcom_smem_get_free_space(unsigned host)
+{
+ struct smem_partition_header *phdr;
+ struct smem_header *header;
+ unsigned ret;
+
+ if (!__smem)
+ return -EPROBE_DEFER;
+
+ if (host < SMEM_HOST_COUNT && __smem->partitions[host]) {
+ phdr = __smem->partitions[host];
+ ret = phdr->offset_free_uncached;
+ } else {
+ header = __smem->regions[0].virt_base;
+ ret = header->available;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_smem_get_free_space);
+
+static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
+{
+ unsigned *versions;
+ size_t size;
+ int ret;
+
+ ret = qcom_smem_get_global(smem, SMEM_ITEM_VERSION,
+ (void **)&versions, &size);
+ if (ret < 0) {
+ dev_err(smem->dev, "Unable to read the version item\n");
+ return -ENOENT;
+ }
+
+ if (size < sizeof(unsigned) * SMEM_MASTER_SBL_VERSION_INDEX) {
+ dev_err(smem->dev, "Version item is too small\n");
+ return -EINVAL;
+ }
+
+ return versions[SMEM_MASTER_SBL_VERSION_INDEX];
+}
+
+static int qcom_smem_enumerate_partitions(struct qcom_smem *smem,
+ unsigned local_host)
+{
+ struct smem_partition_header *header;
+ struct smem_ptable_entry *entry;
+ struct smem_ptable *ptable;
+ unsigned remote_host;
+ int i;
+
+ ptable = smem->regions[0].virt_base + smem->regions[0].size - 4 * 1024;
+ if (ptable->magic != SMEM_PTABLE_MAGIC)
+ return 0;
+
+ if (ptable->version != 1) {
+ dev_err(smem->dev,
+ "Unsupported partition header version %d\n",
+ ptable->version);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ptable->num_entries; i++) {
+ entry = &ptable->entry[i];
+
+ if (entry->host0 != local_host && entry->host1 != local_host)
+ continue;
+
+ if (!entry->offset)
+ continue;
+
+ if (!entry->size)
+ continue;
+
+ if (entry->host0 == local_host)
+ remote_host = entry->host1;
+ else
+ remote_host = entry->host0;
+
+ if (smem->partitions[remote_host]) {
+ dev_err(smem->dev,
+ "Already found a partition for host %d\n",
+ remote_host);
+ return -EINVAL;
+ }
+
+ header = smem->regions[0].virt_base + entry->offset;
+
+ if (header->magic != SMEM_PART_MAGIC) {
+ dev_err(smem->dev,
+ "Partition %d has invalid magic\n", i);
+ return -EINVAL;
+ }
+
+ if (header->host0 != local_host && header->host1 != local_host) {
+ dev_err(smem->dev,
+ "Partition %d hosts are invalid\n", i);
+ return -EINVAL;
+ }
+
+ if (header->host0 != remote_host && header->host1 != remote_host) {
+ dev_err(smem->dev,
+ "Partition %d hosts are invalid\n", i);
+ return -EINVAL;
+ }
+
+ if (header->size != entry->size) {
+ dev_err(smem->dev,
+ "Partition %d has invalid size\n", i);
+ return -EINVAL;
+ }
+
+ if (header->offset_free_uncached > header->size) {
+ dev_err(smem->dev,
+ "Partition %d has invalid free pointer\n", i);
+ return -EINVAL;
+ }
+
+ smem->partitions[remote_host] = header;
+ }
+
+ return 0;
+}
+
+static int qcom_smem_count_mem_regions(struct platform_device *pdev)
+{
+ struct resource *res;
+ int num_regions = 0;
+ int i;
+
+ for (i = 0; i < pdev->num_resources; i++) {
+ res = &pdev->resource[i];
+
+ if (resource_type(res) == IORESOURCE_MEM)
+ num_regions++;
+ }
+
+ return num_regions;
+}
+
+static int qcom_smem_probe(struct platform_device *pdev)
+{
+ struct smem_header *header;
+ struct device_node *np;
+ struct qcom_smem *smem;
+ struct resource *res;
+ struct resource r;
+ size_t array_size;
+ int num_regions = 0;
+ int hwlock_id;
+ u32 version;
+ int ret;
+ int i;
+
+ num_regions = qcom_smem_count_mem_regions(pdev) + 1;
+
+ array_size = num_regions * sizeof(struct smem_region);
+ smem = devm_kzalloc(&pdev->dev, sizeof(*smem) + array_size, GFP_KERNEL);
+ if (!smem)
+ return -ENOMEM;
+
+ smem->dev = &pdev->dev;
+ smem->num_regions = num_regions;
+
+ np = of_parse_phandle(pdev->dev.of_node, "memory-region", 0);
+ if (!np) {
+ dev_err(&pdev->dev, "No memory-region specified\n");
+ return -EINVAL;
+ }
+
+ ret = of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+ if (ret)
+ return ret;
+
+ smem->regions[0].aux_base = (u32)r.start;
+ smem->regions[0].size = resource_size(&r);
+ smem->regions[0].virt_base = devm_ioremap_nocache(&pdev->dev,
+ r.start,
+ resource_size(&r));
+ if (!smem->regions[0].virt_base)
+ return -ENOMEM;
+
+ for (i = 1; i < num_regions; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i - 1);
+
+ smem->regions[i].aux_base = (u32)res->start;
+ smem->regions[i].size = resource_size(res);
+ smem->regions[i].virt_base = devm_ioremap_nocache(&pdev->dev,
+ res->start,
+ resource_size(res));
+ if (!smem->regions[i].virt_base)
+ return -ENOMEM;
+ }
+
+ header = smem->regions[0].virt_base;
+ if (header->initialized != 1 || header->reserved) {
+ dev_err(&pdev->dev, "SMEM is not initilized by SBL\n");
+ return -EINVAL;
+ }
+
+ version = qcom_smem_get_sbl_version(smem);
+ if (version >> 16 != SMEM_EXPECTED_VERSION) {
+ dev_err(&pdev->dev, "Unsupported smem version 0x%x\n", version);
+ return -EINVAL;
+ }
+
+ ret = qcom_smem_enumerate_partitions(smem, SMEM_HOST_APPS);
+ if (ret < 0)
+ return ret;
+
+ hwlock_id = of_hwspin_lock_get_id(pdev->dev.of_node, 0);
+ if (hwlock_id < 0) {
+ dev_err(&pdev->dev, "failed to retrieve hwlock\n");
+ return hwlock_id;
+ }
+
+ smem->hwlock = hwspin_lock_request_specific(hwlock_id);
+ if (!smem->hwlock)
+ return -ENXIO;
+
+ __smem = smem;
+
+ return 0;
+}
+
+static int qcom_smem_remove(struct platform_device *pdev)
+{
+ hwspin_lock_free(__smem->hwlock);
+ __smem = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id qcom_smem_of_match[] = {
+ { .compatible = "qcom,smem" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qcom_smem_of_match);
+
+static struct platform_driver qcom_smem_driver = {
+ .probe = qcom_smem_probe,
+ .remove = qcom_smem_remove,
+ .driver = {
+ .name = "qcom_smem",
+ .of_match_table = qcom_smem_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+
+static int __init qcom_smem_init(void)
+{
+ return platform_driver_register(&qcom_smem_driver);
+}
+arch_initcall(qcom_smem_init);
+
+static void __exit qcom_smem_exit(void)
+{
+ platform_driver_unregister(&qcom_smem_driver);
+}
+module_exit(qcom_smem_exit)
+
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
+MODULE_DESCRIPTION("Qualcomm Shared Memory Manager");
+MODULE_LICENSE("GPLv2");
--- /dev/null
+++ b/include/linux/soc/qcom/smem.h
@@ -0,0 +1,14 @@
+#ifndef __QCOM_SMEM_H__
+#define __QCOM_SMEM_H__
+
+struct device_node;
+struct qcom_smem;
+
+#define QCOM_SMEM_HOST_ANY -1
+
+int qcom_smem_alloc(unsigned host, unsigned item, size_t size);
+int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size);
+
+int qcom_smem_get_free_space(unsigned host);
+
+#endif

263
target/linux/ipq806x/patches-4.1/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch
View file

@ -1,263 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v2,3/5] DT: PCI: qcom: Document PCIe devicetree bindings
From: Stanimir Varbanov <svarbanov@mm-sol.com>
X-Patchwork-Id: 6326181
Message-Id: <1430743338-10441-4-git-send-email-svarbanov@mm-sol.com>
To: Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>,
Mark Rutland <mark.rutland@arm.com>,
Grant Likely <grant.likely@linaro.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Russell King <linux@arm.linux.org.uk>, Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-pci@vger.kernel.org, Mathieu Olivari <mathieu@codeaurora.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Stanimir Varbanov <svarbanov@mm-sol.com>
Date: Mon, 4 May 2015 15:42:16 +0300
Document Qualcomm PCIe driver devicetree bindings.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
---
.../devicetree/bindings/pci/qcom,pcie.txt | 231 ++++++++++++++++++++
1 files changed, 231 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -0,0 +1,231 @@
+* Qualcomm PCI express root complex
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Value shall include
+ - "qcom,pcie-v0" for apq/ipq8064
+ - "qcom,pcie-v1" for apq8084
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Register ranges as listed in the reg-names property
+
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must include the following entries
+ - "parf" Qualcomm specific registers
+ - "dbi" Designware PCIe registers
+ - "elbi" External local bus interface registers
+ - "config" PCIe configuration space
+
+- device_type:
+ Usage: required
+ Value type: <string>
+ Definition: Should be "pci". As specified in designware-pcie.txt
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be set to 3. As specified in designware-pcie.txt
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be set 2. As specified in designware-pcie.txt
+
+- ranges:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: As specified in designware-pcie.txt
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: MSI interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain "msi"
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be 1. As specified in designware-pcie.txt
+
+- interrupt-map-mask:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: As specified in designware-pcie.txt
+
+- interrupt-map:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: As specified in designware-pcie.txt
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: List of phandle and clock specifier pairs as listed
+ in clock-names property
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ * should be populated for v0 and v1
+ - "iface" Configuration AHB clock
+
+ * should be populated for v0
+ - "core" Clocks the pcie hw block
+ - "phy" Clocks the pcie PHY block
+
+ * should be populated for v1
+ - "aux" Auxiliary (AUX) clock
+ - "bus_master" Master AXI clock
+ - "bus_slave" Slave AXI clock
+
+- resets:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: List of phandle and reset specifier pairs as listed
+ in reset-names property
+
+- reset-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ * should be populated for v0
+ - "axi" AXI reset
+ - "ahb" AHB reset
+ - "por" POR reset
+ - "pci" PCI reset
+ - "phy" PHY reset
+
+ * should be populated for v1
+ - "core" Core reset
+
+- power-domains:
+ Usage: required (for v1 only)
+ Value type: <prop-encoded-array>
+ Definition: A phandle and power domain specifier pair to the
+ power domain which is responsible for collapsing
+ and restoring power to the peripheral
+
+- <name>-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: List of phandles to the power supply regulator(s)
+ * should be populated for v0 and v1
+ - "vdda" core analog power supply
+
+ * should be populated for v0
+ - "vdda_phy" analog power supply for PHY
+ - "vdda_refclk" analog power supply for IC which generate
+ reference clock
+
+- phys:
+ Usage: required (for v1 only)
+ Value type: <phandle>
+ Definition: List of phandle(s) as listed in phy-names property
+
+- phy-names:
+ Usage: required (for v1 only)
+ Value type: <stringlist>
+ Definition: Should contain "pciephy"
+
+- <name>-gpio:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: List of phandle and gpio specifier pairs. Should contain
+ - "perst" PCIe endpoint reset signal line
+ - "pewake" PCIe endpoint wake signal line
+
+- pinctrl-0:
+ Usage: required
+ Value type: <phandle>
+ Definition: List of phandles pointing at a pin(s) configuration
+
+- pinctrl-names
+ Usage: required
+ Value type: <stringlist>
+ Definition: List of names of pinctrl-0 state
+
+* Example for v0
+ pcie0: pci@1b500000 {
+ compatible = "qcom,pcie-v0";
+ reg = <0x1b500000 0x1000
+ 0x1b502000 0x80
+ 0x1b600000 0x100
+ 0x0ff00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
+ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* memory */
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ clocks = <&gcc PCIE_A_CLK>,
+ <&gcc PCIE_H_CLK>,
+ <&gcc PCIE_PHY_CLK>;
+ clock-names = "core", "iface", "phy";
+ resets = <&gcc PCIE_ACLK_RESET>,
+ <&gcc PCIE_HCLK_RESET>,
+ <&gcc PCIE_POR_RESET>,
+ <&gcc PCIE_PCI_RESET>,
+ <&gcc PCIE_PHY_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy";
+ };
+
+* Example for v1
+ pcie0@fc520000 {
+ compatible = "qcom,pcie-v1";
+ reg = <0xfc520000 0x2000>,
+ <0xff000000 0x1000>,
+ <0xff001000 0x1000>,
+ <0xff002000 0x2000>;
+ reg-names = "parf", "dbi", "elbi", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */
+ 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
+ interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>;
+ clock-names = "iface", "master_bus", "slave_bus", "aux";
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "core";
+ power-domains = <&gcc PCIE0_GDSC>;
+ vdda-supply = <&pma8084_l3>;
+ phys = <&pciephy0>;
+ phy-names = "pciephy";
+ perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_pins_default>;
+ pinctrl-names = "default";
+ };

753
target/linux/ipq806x/patches-4.1/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
View file

@ -1,753 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v2,4/5] PCI: qcom: Add Qualcomm PCIe controller driver
From: Stanimir Varbanov <svarbanov@mm-sol.com>
X-Patchwork-Id: 6326161
Message-Id: <1430743338-10441-5-git-send-email-svarbanov@mm-sol.com>
To: Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>,
Mark Rutland <mark.rutland@arm.com>,
Grant Likely <grant.likely@linaro.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Russell King <linux@arm.linux.org.uk>, Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-pci@vger.kernel.org, Mathieu Olivari <mathieu@codeaurora.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Stanimir Varbanov <svarbanov@mm-sol.com>
Date: Mon, 4 May 2015 15:42:17 +0300
The PCIe driver reuse the Designware common code for host
and MSI initialization, and also program the Qualcomm
application specific registers.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
---
MAINTAINERS | 7 +
drivers/pci/host/Kconfig | 9 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pcie-qcom.c | 677 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 694 insertions(+), 0 deletions(-)
create mode 100644 drivers/pci/host/pcie-qcom.c
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7599,6 +7599,13 @@ L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*spear*
+PCIE DRIVER FOR QUALCOMM MSM
+M: Stanimir Varbanov <svarbanov@mm-sol.com>
+L: linux-pci@vger.kernel.org
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: drivers/pci/host/*qcom*
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -125,4 +125,13 @@ config PCIE_IPROC_PLATFORM
Say Y here if you want to use the Broadcom iProc PCIe controller
through the generic platform bus interface
+config PCIE_QCOM
+ bool "Qualcomm PCIe controller"
+ depends on ARCH_QCOM && OF || (ARM && COMPILE_TEST)
+ select PCIE_DW
+ select PCIEPORTBUS
+ help
+ Say Y here to enable PCIe controller support on Qualcomm SoCs. The
+ PCIe controller use Designware core plus Qualcomm specific hardware
+ wrappers.
endmenu
--- /dev/null
+++ b/drivers/pci/host/pcie-qcom.c
@@ -0,0 +1,677 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+#define PCIE20_PARF_PHY_CTRL 0x40
+#define PCIE20_PARF_PHY_REFCLK 0x4C
+#define PCIE20_PARF_DBI_BASE_ADDR 0x168
+#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
+#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
+
+#define PCIE20_ELBI_SYS_CTRL 0x04
+#define PCIE20_ELBI_SYS_STTS 0x08
+#define XMLH_LINK_UP BIT(10)
+
+#define PCIE20_CAP 0x70
+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
+
+#define PERST_DELAY_MIN_US 1000
+#define PERST_DELAY_MAX_US 1005
+
+#define LINKUP_DELAY_MIN_US 5000
+#define LINKUP_DELAY_MAX_US 5100
+#define LINKUP_RETRIES_COUNT 20
+
+#define PCIE_V0 0 /* apq8064 */
+#define PCIE_V1 1 /* apq8084 */
+
+struct qcom_pcie_resources_v0 {
+ struct clk *iface_clk;
+ struct clk *core_clk;
+ struct clk *phy_clk;
+ struct reset_control *pci_reset;
+ struct reset_control *axi_reset;
+ struct reset_control *ahb_reset;
+ struct reset_control *por_reset;
+ struct reset_control *phy_reset;
+ struct regulator *vdda;
+ struct regulator *vdda_phy;
+ struct regulator *vdda_refclk;
+};
+
+struct qcom_pcie_resources_v1 {
+ struct clk *iface;
+ struct clk *aux;
+ struct clk *master_bus;
+ struct clk *slave_bus;
+ struct reset_control *core;
+ struct regulator *vdda;
+};
+
+union pcie_resources {
+ struct qcom_pcie_resources_v0 v0;
+ struct qcom_pcie_resources_v1 v1;
+};
+
+struct qcom_pcie {
+ struct pcie_port pp;
+ struct device *dev;
+ union pcie_resources res;
+ void __iomem *parf;
+ void __iomem *dbi;
+ void __iomem *elbi;
+ struct phy *phy;
+ struct gpio_desc *reset;
+ unsigned int version;
+};
+
+#define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp)
+
+static inline void
+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
+{
+ u32 val = readl(addr);
+
+ val &= ~clear_mask;
+ val |= set_mask;
+ writel(val, addr);
+}
+
+static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert)
+{
+ int val, active_low;
+
+ if (IS_ERR_OR_NULL(pcie->reset))
+ return;
+
+ active_low = gpiod_is_active_low(pcie->reset);
+
+ if (assert)
+ val = !!active_low;
+ else
+ val = !active_low;
+
+ gpiod_set_value(pcie->reset, val);
+
+ usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US);
+}
+
+static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
+{
+ qcom_ep_reset_assert_deassert(pcie, 1);
+}
+
+static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
+{
+ qcom_ep_reset_assert_deassert(pcie, 0);
+}
+
+static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg)
+{
+ struct pcie_port *pp = arg;
+
+ return dw_handle_msi_irq(pp);
+}
+
+static int qcom_pcie_link_up(struct pcie_port *pp)
+{
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
+ u32 val = readl(pcie->dbi + PCIE20_CAP_LINKCTRLSTATUS);
+
+ return val & BIT(29) ? 1 : 0;
+}
+
+static void qcom_pcie_disable_resources_v0(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+
+ reset_control_assert(res->pci_reset);
+ reset_control_assert(res->axi_reset);
+ reset_control_assert(res->ahb_reset);
+ reset_control_assert(res->por_reset);
+ reset_control_assert(res->pci_reset);
+ clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->core_clk);
+ clk_disable_unprepare(res->phy_clk);
+ regulator_disable(res->vdda);
+ regulator_disable(res->vdda_phy);
+ regulator_disable(res->vdda_refclk);
+}
+
+static void qcom_pcie_disable_resources_v1(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+
+ reset_control_assert(res->core);
+ clk_disable_unprepare(res->slave_bus);
+ clk_disable_unprepare(res->master_bus);
+ clk_disable_unprepare(res->iface);
+ clk_disable_unprepare(res->aux);
+ regulator_disable(res->vdda);
+}
+
+static int qcom_pcie_enable_resources_v0(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+ struct device *dev = pcie->dev;
+ int ret;
+
+ ret = regulator_enable(res->vdda);
+ if (ret) {
+ dev_err(dev, "cannot enable vdda regulator\n");
+ return ret;
+ }
+
+ ret = regulator_enable(res->vdda_refclk);
+ if (ret) {
+ dev_err(dev, "cannot enable vdda_refclk regulator\n");
+ goto err_refclk;
+ }
+
+ ret = regulator_enable(res->vdda_phy);
+ if (ret) {
+ dev_err(dev, "cannot enable vdda_phy regulator\n");
+ goto err_vdda_phy;
+ }
+
+ ret = clk_prepare_enable(res->iface_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable iface clock\n");
+ goto err_iface;
+ }
+
+ ret = clk_prepare_enable(res->core_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable core clock\n");
+ goto err_clk_core;
+ }
+
+ ret = clk_prepare_enable(res->phy_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable phy clock\n");
+ goto err_clk_phy;
+ }
+
+ ret = reset_control_deassert(res->ahb_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert ahb reset\n");
+ goto err_reset_ahb;
+ }
+
+ return 0;
+
+err_reset_ahb:
+ clk_disable_unprepare(res->phy_clk);
+err_clk_phy:
+ clk_disable_unprepare(res->core_clk);
+err_clk_core:
+ clk_disable_unprepare(res->iface_clk);
+err_iface:
+ regulator_disable(res->vdda_phy);
+err_vdda_phy:
+ regulator_disable(res->vdda_refclk);
+err_refclk:
+ regulator_disable(res->vdda);
+ return ret;
+}
+
+static int qcom_pcie_enable_resources_v1(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+ struct device *dev = pcie->dev;
+ int ret;
+
+ ret = reset_control_deassert(res->core);
+ if (ret) {
+ dev_err(dev, "cannot deassert core reset\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(res->aux);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable aux clock\n");
+ goto err_res;
+ }
+
+ ret = clk_prepare_enable(res->iface);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable iface clock\n");
+ goto err_aux;
+ }
+
+ ret = clk_prepare_enable(res->master_bus);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable master_bus clock\n");
+ goto err_iface;
+ }
+
+ ret = clk_prepare_enable(res->slave_bus);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable slave_bus clock\n");
+ goto err_master;
+ }
+
+ ret = regulator_enable(res->vdda);
+ if (ret) {
+ dev_err(dev, "cannot enable vdda regulator\n");
+ goto err_slave;
+ }
+
+ return 0;
+
+err_slave:
+ clk_disable_unprepare(res->slave_bus);
+err_master:
+ clk_disable_unprepare(res->master_bus);
+err_iface:
+ clk_disable_unprepare(res->iface);
+err_aux:
+ clk_disable_unprepare(res->aux);
+err_res:
+ reset_control_assert(res->core);
+
+ return ret;
+}
+
+static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+ struct device *dev = pcie->dev;
+
+ res->vdda = devm_regulator_get(dev, "vdda");
+ if (IS_ERR(res->vdda))
+ return PTR_ERR(res->vdda);
+
+ res->vdda_phy = devm_regulator_get(dev, "vdda_phy");
+ if (IS_ERR(res->vdda_phy))
+ return PTR_ERR(res->vdda_phy);
+
+ res->vdda_refclk = devm_regulator_get(dev, "vdda_refclk");
+ if (IS_ERR(res->vdda_refclk))
+ return PTR_ERR(res->vdda_refclk);
+
+ res->iface_clk = devm_clk_get(dev, "iface");
+ if (IS_ERR(res->iface_clk))
+ return PTR_ERR(res->iface_clk);
+
+ res->core_clk = devm_clk_get(dev, "core");
+ if (IS_ERR(res->core_clk))
+ return PTR_ERR(res->core_clk);
+
+ res->phy_clk = devm_clk_get(dev, "phy");
+ if (IS_ERR(res->phy_clk))
+ return PTR_ERR(res->phy_clk);
+
+ res->pci_reset = devm_reset_control_get(dev, "pci");
+ if (IS_ERR(res->pci_reset))
+ return PTR_ERR(res->pci_reset);
+
+ res->axi_reset = devm_reset_control_get(dev, "axi");
+ if (IS_ERR(res->axi_reset))
+ return PTR_ERR(res->axi_reset);
+
+ res->ahb_reset = devm_reset_control_get(dev, "ahb");
+ if (IS_ERR(res->ahb_reset))
+ return PTR_ERR(res->ahb_reset);
+
+ res->por_reset = devm_reset_control_get(dev, "por");
+ if (IS_ERR(res->por_reset))
+ return PTR_ERR(res->por_reset);
+
+ res->phy_reset = devm_reset_control_get(dev, "phy");
+ if (IS_ERR(res->phy_reset))
+ return PTR_ERR(res->phy_reset);
+
+ return 0;
+}
+
+static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+ struct device *dev = pcie->dev;
+
+ res->vdda = devm_regulator_get(dev, "vdda");
+ if (IS_ERR(res->vdda))
+ return PTR_ERR(res->vdda);
+
+ res->iface = devm_clk_get(dev, "iface");
+ if (IS_ERR(res->iface))
+ return PTR_ERR(res->iface);
+
+ res->aux = devm_clk_get(dev, "aux");
+ if (IS_ERR(res->aux) && PTR_ERR(res->aux) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ else if (IS_ERR(res->aux))
+ res->aux = NULL;
+
+ res->master_bus = devm_clk_get(dev, "master_bus");
+ if (IS_ERR(res->master_bus))
+ return PTR_ERR(res->master_bus);
+
+ res->slave_bus = devm_clk_get(dev, "slave_bus");
+ if (IS_ERR(res->slave_bus))
+ return PTR_ERR(res->slave_bus);
+
+ res->core = devm_reset_control_get(dev, "core");
+ if (IS_ERR(res->core))
+ return PTR_ERR(res->core);
+
+ return 0;
+}
+
+static int qcom_pcie_enable_link_training(struct pcie_port *pp)
+{
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
+ struct device *dev = pp->dev;
+ int retries;
+ u32 val;
+
+ /* enable link training */
+ writel_masked(pcie->elbi + PCIE20_ELBI_SYS_CTRL, 0, BIT(0));
+
+ /* wait for up to 100ms for the link to come up */
+ retries = LINKUP_RETRIES_COUNT;
+ do {
+ val = readl(pcie->elbi + PCIE20_ELBI_SYS_STTS);
+ if (val & XMLH_LINK_UP)
+ break;
+ usleep_range(LINKUP_DELAY_MIN_US, LINKUP_DELAY_MAX_US);
+ } while (retries--);
+
+ if (retries < 0 || !dw_pcie_link_up(pp)) {
+ dev_err(dev, "link initialization failed\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void qcom_pcie_host_init_v1(struct pcie_port *pp)
+{
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
+ int ret;
+
+ qcom_ep_reset_assert(pcie);
+
+ ret = qcom_pcie_enable_resources_v1(pcie);
+ if (ret)
+ return;
+
+ /* change DBI base address */
+ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ writel_masked(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT,
+ 0, BIT(31));
+
+ ret = phy_init(pcie->phy);
+ if (ret)
+ goto err_res;
+
+ ret = phy_power_on(pcie->phy);
+ if (ret)
+ goto err_phy;
+
+ dw_pcie_setup_rc(pp);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dw_pcie_msi_init(pp);
+
+ qcom_ep_reset_deassert(pcie);
+
+ ret = qcom_pcie_enable_link_training(pp);
+ if (ret)
+ goto err;
+
+ return;
+
+err:
+ qcom_ep_reset_assert(pcie);
+ phy_power_off(pcie->phy);
+err_phy:
+ phy_exit(pcie->phy);
+err_res:
+ qcom_pcie_disable_resources_v1(pcie);
+}
+
+static void qcom_pcie_host_init_v0(struct pcie_port *pp)
+{
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+ struct device *dev = pcie->dev;
+ int ret;
+
+ qcom_ep_reset_assert(pcie);
+
+ ret = qcom_pcie_enable_resources_v0(pcie);
+ if (ret)
+ return;
+
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
+
+ /* enable external reference clock */
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
+
+ ret = reset_control_deassert(res->phy_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert phy reset\n");
+ return;
+ }
+
+ ret = reset_control_deassert(res->pci_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert pci reset\n");
+ return;
+ }
+
+ ret = reset_control_deassert(res->por_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert por reset\n");
+ return;
+ }
+
+ ret = reset_control_deassert(res->axi_reset);
+ if (ret) {
+ dev_err(dev, "cannot deassert axi reset\n");
+ return;
+ }
+
+ /* wait 150ms for clock acquisition */
+ usleep_range(10000, 15000);
+
+ dw_pcie_setup_rc(pp);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dw_pcie_msi_init(pp);
+
+ qcom_ep_reset_deassert(pcie);
+
+ ret = qcom_pcie_enable_link_training(pp);
+ if (ret)
+ goto err;
+
+ return;
+err:
+ qcom_ep_reset_assert(pcie);
+ qcom_pcie_disable_resources_v0(pcie);
+}
+
+static void qcom_pcie_host_init(struct pcie_port *pp)
+{
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
+
+ if (pcie->version == PCIE_V0)
+ return qcom_pcie_host_init_v0(pp);
+ else
+ return qcom_pcie_host_init_v1(pp);
+}
+
+static int
+qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val)
+{
+ /* the device class is not reported correctly from the register */
+ if (where == PCI_CLASS_REVISION && size == 4) {
+ *val = readl(pp->dbi_base + PCI_CLASS_REVISION);
+ *val &= ~(0xffff << 16);
+ *val |= PCI_CLASS_BRIDGE_PCI << 16;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ return dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where,
+ size, val);
+}
+
+static struct pcie_host_ops qcom_pcie_ops = {
+ .link_up = qcom_pcie_link_up,
+ .host_init = qcom_pcie_host_init,
+ .rd_own_conf = qcom_pcie_rd_own_conf,
+};
+
+static const struct of_device_id qcom_pcie_match[] = {
+ { .compatible = "qcom,pcie-v0", .data = (void *)PCIE_V0 },
+ { .compatible = "qcom,pcie-v1", .data = (void *)PCIE_V1 },
+ { }
+};
+
+static int qcom_pcie_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *match;
+ struct resource *res;
+ struct qcom_pcie *pcie;
+ struct pcie_port *pp;
+ int ret;
+
+ match = of_match_node(qcom_pcie_match, dev->of_node);
+ if (!match)
+ return -ENXIO;
+
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ pcie->version = (unsigned int)match->data;
+
+ pcie->reset = devm_gpiod_get_optional(dev, "perst");
+ if (IS_ERR(pcie->reset) && PTR_ERR(pcie->reset) == -EPROBE_DEFER)
+ return PTR_ERR(pcie->reset);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
+ pcie->parf = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pcie->parf))
+ return PTR_ERR(pcie->parf);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
+ pcie->dbi = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pcie->dbi))
+ return PTR_ERR(pcie->dbi);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
+ pcie->elbi = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pcie->elbi))
+ return PTR_ERR(pcie->elbi);
+
+ pcie->phy = devm_phy_optional_get(dev, "pciephy");
+ if (IS_ERR(pcie->phy))
+ return PTR_ERR(pcie->phy);
+
+ pcie->dev = dev;
+
+ if (pcie->version == PCIE_V0)
+ ret = qcom_pcie_get_resources_v0(pcie);
+ else
+ ret = qcom_pcie_get_resources_v1(pcie);
+
+ if (ret)
+ return ret;
+
+ pp = &pcie->pp;
+ pp->dev = dev;
+ pp->dbi_base = pcie->dbi;
+ pp->root_bus_nr = -1;
+ pp->ops = &qcom_pcie_ops;
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ pp->msi_irq = platform_get_irq_byname(pdev, "msi");
+ if (pp->msi_irq < 0) {
+ dev_err(dev, "cannot get msi irq\n");
+ return pp->msi_irq;
+ }
+
+ ret = devm_request_irq(dev, pp->msi_irq,
+ qcom_pcie_msi_irq_handler,
+ IRQF_SHARED, "qcom-pcie-msi", pp);
+ if (ret) {
+ dev_err(dev, "cannot request msi irq\n");
+ return ret;
+ }
+ }
+
+ ret = dw_pcie_host_init(pp);
+ if (ret) {
+ dev_err(dev, "cannot initialize host\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, pcie);
+
+ return 0;
+}
+
+static int qcom_pcie_remove(struct platform_device *pdev)
+{
+ struct qcom_pcie *pcie = platform_get_drvdata(pdev);
+
+ qcom_ep_reset_assert(pcie);
+ phy_power_off(pcie->phy);
+ phy_exit(pcie->phy);
+ if (pcie->version == PCIE_V0)
+ qcom_pcie_disable_resources_v0(pcie);
+ else
+ qcom_pcie_disable_resources_v1(pcie);
+
+ return 0;
+}
+
+static struct platform_driver qcom_pcie_driver = {
+ .probe = qcom_pcie_probe,
+ .remove = qcom_pcie_remove,
+ .driver = {
+ .name = "qcom-pcie",
+ .of_match_table = qcom_pcie_match,
+ },
+};
+
+module_platform_driver(qcom_pcie_driver);
+
+MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
+MODULE_DESCRIPTION("Qualcomm PCIe root complex driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-pcie");
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_PCI_LAYERSCAPE) += pci-laye
obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
+obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o

311
target/linux/ipq806x/patches-4.1/114-pcie-add-ctlr-init.patch
View file

@ -1,311 +0,0 @@
--- a/drivers/pci/host/pcie-qcom.c
+++ b/drivers/pci/host/pcie-qcom.c
@@ -29,8 +29,53 @@
#include "pcie-designware.h"
+/* DBI registers */
+#define PCIE20_CAP 0x70
+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
+
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
+
+#define PCIE20_PLR_IATU_VIEWPORT 0x900
+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31)
+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0)
+
+#define PCIE20_PLR_IATU_CTRL1 0x904
+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0)
+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0)
+
+#define PCIE20_PLR_IATU_CTRL2 0x908
+#define PCIE20_PLR_IATU_ENABLE BIT(31)
+
+#define PCIE20_PLR_IATU_LBAR 0x90C
+#define PCIE20_PLR_IATU_UBAR 0x910
+#define PCIE20_PLR_IATU_LAR 0x914
+#define PCIE20_PLR_IATU_LTAR 0x918
+#define PCIE20_PLR_IATU_UTAR 0x91c
+
+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
+
+/* PARF registers */
+#define PCIE20_PARF_PCS_DEEMPH 0x34
+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16)
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8)
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0)
+
+#define PCIE20_PARF_PCS_SWING 0x38
+#define PCS_SWING_TX_SWING_FULL(x) (x << 8)
+#define PCS_SWING_TX_SWING_LOW(x) (x << 0)
+
#define PCIE20_PARF_PHY_CTRL 0x40
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
+
#define PCIE20_PARF_PHY_REFCLK 0x4C
+#define REF_SSP_EN BIT(16)
+#define REF_USE_PAD BIT(12)
+
+#define PCIE20_PARF_CONFIG_BITS 0x50
+#define PHY_RX0_EQ(x) (x << 24)
+
#define PCIE20_PARF_DBI_BASE_ADDR 0x168
#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
@@ -39,9 +84,6 @@
#define PCIE20_ELBI_SYS_STTS 0x08
#define XMLH_LINK_UP BIT(10)
-#define PCIE20_CAP 0x70
-#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
-
#define PERST_DELAY_MIN_US 1000
#define PERST_DELAY_MAX_US 1005
@@ -56,14 +98,18 @@ struct qcom_pcie_resources_v0 {
struct clk *iface_clk;
struct clk *core_clk;
struct clk *phy_clk;
+ struct clk *aux_clk;
+ struct clk *ref_clk;
struct reset_control *pci_reset;
struct reset_control *axi_reset;
struct reset_control *ahb_reset;
struct reset_control *por_reset;
struct reset_control *phy_reset;
+ struct reset_control *ext_reset;
struct regulator *vdda;
struct regulator *vdda_phy;
struct regulator *vdda_refclk;
+ uint8_t phy_tx0_term_offset;
};
struct qcom_pcie_resources_v1 {
@@ -106,20 +152,10 @@ writel_masked(void __iomem *addr, u32 cl
static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert)
{
- int val, active_low;
-
if (IS_ERR_OR_NULL(pcie->reset))
return;
- active_low = gpiod_is_active_low(pcie->reset);
-
- if (assert)
- val = !!active_low;
- else
- val = !active_low;
-
- gpiod_set_value(pcie->reset, val);
-
+ gpiod_set_value(pcie->reset, assert);
usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US);
}
@@ -156,10 +192,13 @@ static void qcom_pcie_disable_resources_
reset_control_assert(res->axi_reset);
reset_control_assert(res->ahb_reset);
reset_control_assert(res->por_reset);
- reset_control_assert(res->pci_reset);
+ reset_control_assert(res->phy_reset);
+ reset_control_assert(res->ext_reset);
clk_disable_unprepare(res->iface_clk);
clk_disable_unprepare(res->core_clk);
clk_disable_unprepare(res->phy_clk);
+ clk_disable_unprepare(res->aux_clk);
+ clk_disable_unprepare(res->ref_clk);
regulator_disable(res->vdda);
regulator_disable(res->vdda_phy);
regulator_disable(res->vdda_refclk);
@@ -201,6 +240,12 @@ static int qcom_pcie_enable_resources_v0
goto err_vdda_phy;
}
+ ret = reset_control_deassert(res->ext_reset);
+ if (ret) {
+ dev_err(dev, "cannot assert ext reset\n");
+ goto err_reset_ext;
+ }
+
ret = clk_prepare_enable(res->iface_clk);
if (ret) {
dev_err(dev, "cannot prepare/enable iface clock\n");
@@ -219,21 +264,40 @@ static int qcom_pcie_enable_resources_v0
goto err_clk_phy;
}
+ ret = clk_prepare_enable(res->aux_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable aux clock\n");
+ goto err_clk_aux;
+ }
+
+ ret = clk_prepare_enable(res->ref_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable ref clock\n");
+ goto err_clk_ref;
+ }
+
ret = reset_control_deassert(res->ahb_reset);
if (ret) {
dev_err(dev, "cannot deassert ahb reset\n");
goto err_reset_ahb;
}
+ udelay(1);
return 0;
err_reset_ahb:
+ clk_disable_unprepare(res->ref_clk);
+err_clk_ref:
+ clk_disable_unprepare(res->aux_clk);
+err_clk_aux:
clk_disable_unprepare(res->phy_clk);
err_clk_phy:
clk_disable_unprepare(res->core_clk);
err_clk_core:
clk_disable_unprepare(res->iface_clk);
err_iface:
+ reset_control_assert(res->ext_reset);
+err_reset_ext:
regulator_disable(res->vdda_phy);
err_vdda_phy:
regulator_disable(res->vdda_refclk);
@@ -329,6 +393,14 @@ static int qcom_pcie_get_resources_v0(st
if (IS_ERR(res->phy_clk))
return PTR_ERR(res->phy_clk);
+ res->aux_clk = devm_clk_get(dev, "aux");
+ if (IS_ERR(res->aux_clk))
+ return PTR_ERR(res->aux_clk);
+
+ res->ref_clk = devm_clk_get(dev, "ref");
+ if (IS_ERR(res->ref_clk))
+ return PTR_ERR(res->ref_clk);
+
res->pci_reset = devm_reset_control_get(dev, "pci");
if (IS_ERR(res->pci_reset))
return PTR_ERR(res->pci_reset);
@@ -349,6 +421,14 @@ static int qcom_pcie_get_resources_v0(st
if (IS_ERR(res->phy_reset))
return PTR_ERR(res->phy_reset);
+ res->ext_reset = devm_reset_control_get(dev, "ext");
+ if (IS_ERR(res->ext_reset))
+ return PTR_ERR(res->ext_reset);
+
+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
+ &res->phy_tx0_term_offset))
+ res->phy_tx0_term_offset = 0;
+
return 0;
}
@@ -461,6 +541,57 @@ err_res:
qcom_pcie_disable_resources_v1(pcie);
}
+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
+{
+ struct pcie_port *pp = &pcie->pp;
+
+ /*
+ * program and enable address translation region 0 (device config
+ * address space); region type config;
+ * axi config address range to device config address range
+ */
+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
+ PCIE20_PLR_IATU_REGION_INDEX(0),
+ pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
+
+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
+ writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
+ writel(pp->cfg0_mod_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
+ writel((pp->cfg0_mod_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
+ writel((pp->cfg0_mod_base + pp->cfg0_size - 1),
+ pcie->dbi + PCIE20_PLR_IATU_LAR);
+ writel(busdev, pcie->dbi + PCIE20_PLR_IATU_LTAR);
+ writel(0, pcie->dbi + PCIE20_PLR_IATU_UTAR);
+}
+
+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
+{
+ struct pcie_port *pp = &pcie->pp;
+
+ /*
+ * program and enable address translation region 2 (device resource
+ * address space); region type memory;
+ * axi device bar address range to device bar address range
+ */
+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
+ PCIE20_PLR_IATU_REGION_INDEX(2),
+ pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
+
+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
+ writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
+ writel(pp->mem_mod_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
+ writel((pp->mem_mod_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
+ writel(pp->mem_mod_base + pp->mem_size - 1,
+ pcie->dbi + PCIE20_PLR_IATU_LAR);
+ writel(pp->mem_bus_addr, pcie->dbi + PCIE20_PLR_IATU_LTAR);
+ writel(upper_32_bits(pp->mem_bus_addr),
+ pcie->dbi + PCIE20_PLR_IATU_UTAR);
+
+ /* 256B PCIE buffer setting */
+ writel(0x1, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
+ writel(0x1, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
+}
+
static void qcom_pcie_host_init_v0(struct pcie_port *pp)
{
struct qcom_pcie *pcie = to_qcom_pcie(pp);
@@ -470,15 +601,34 @@ static void qcom_pcie_host_init_v0(struc
qcom_ep_reset_assert(pcie);
+ reset_control_assert(res->ahb_reset);
+
ret = qcom_pcie_enable_resources_v0(pcie);
if (ret)
return;
writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
- /* enable external reference clock */
- writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
+ /* Set Tx termination offset */
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
+ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
+ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
+
+ /* PARF programming */
+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
+ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
+ writel(PCS_SWING_TX_SWING_FULL(0x78) |
+ PCS_SWING_TX_SWING_LOW(0x78),
+ pcie->parf + PCIE20_PARF_PCS_SWING);
+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
+
+ /* Enable reference clock */
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
+ REF_USE_PAD, REF_SSP_EN);
+ /* De-assert PHY, PCIe, POR and AXI resets */
ret = reset_control_deassert(res->phy_reset);
if (ret) {
dev_err(dev, "cannot deassert phy reset\n");
@@ -517,6 +667,9 @@ static void qcom_pcie_host_init_v0(struc
if (ret)
goto err;
+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
+
return;
err:
qcom_ep_reset_assert(pcie);

164
target/linux/ipq806x/patches-4.1/136-clk-Add-safe-switch-hook.patch
View file

@ -1,164 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,04/13] clk: Add safe switch hook
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063211
Message-Id: <1426920332-9340-5-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 20 Mar 2015 23:45:23 -0700
Sometimes clocks can't accept their parent source turning off
while the source is reprogrammed to a different rate. Most
notably CPU clocks require a way to switch away from the current
PLL they're running on, reprogram that PLL to a new rate, and
then switch back to the PLL with the new rate once they're done.
Add a hook that drivers can implement allowing them to return a
'safe parent' that they can switch their parent to while the
upstream source is reprogrammed to support this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
This patch is good enough for Krait, but soon I'll need to
support a "safe rate" where we ask a clock what rate it needs to be running
at to be sure it's within voltage constraints. Right now safe parent
handles that problem on Krait, but on other platforms it won't work.
drivers/clk/clk.c | 61 ++++++++++++++++++++++++++++++++++++++------
include/linux/clk-provider.h | 1 +
2 files changed, 54 insertions(+), 8 deletions(-)
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -56,9 +56,12 @@ struct clk_core {
struct clk_core **parents;
u8 num_parents;
u8 new_parent_index;
+ u8 safe_parent_index;
unsigned long rate;
unsigned long req_rate;
+ unsigned long old_rate;
unsigned long new_rate;
+ struct clk_core *safe_parent;
struct clk_core *new_parent;
struct clk_core *new_child;
unsigned long flags;
@@ -1596,7 +1599,8 @@ out:
static void clk_calc_subtree(struct clk_core *clk, unsigned long new_rate,
struct clk_core *new_parent, u8 p_index)
{
- struct clk_core *child;
+ struct clk_core *child, *parent;
+ struct clk_hw *parent_hw;
clk->new_rate = new_rate;
clk->new_parent = new_parent;
@@ -1606,6 +1610,18 @@ static void clk_calc_subtree(struct clk_
if (new_parent && new_parent != clk->parent)
new_parent->new_child = clk;
+ if (clk->ops->get_safe_parent) {
+ parent_hw = clk->ops->get_safe_parent(clk->hw);
+ if (parent_hw) {
+ parent = parent_hw->core;
+ p_index = clk_fetch_parent_index(clk, parent);
+ clk->safe_parent_index = p_index;
+ clk->safe_parent = parent;
+ }
+ } else {
+ clk->safe_parent = NULL;
+ }
+
hlist_for_each_entry(child, &clk->children, child_node) {
child->new_rate = clk_recalc(child, new_rate);
clk_calc_subtree(child, child->new_rate, NULL, 0);
@@ -1710,14 +1726,43 @@ static struct clk_core *clk_propagate_ra
unsigned long event)
{
struct clk_core *child, *tmp_clk, *fail_clk = NULL;
+ struct clk_core *old_parent;
int ret = NOTIFY_DONE;
- if (clk->rate == clk->new_rate)
+ if (clk->rate == clk->new_rate && event != POST_RATE_CHANGE)
return NULL;
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ if (clk->safe_parent)
+ clk->ops->set_parent(clk->hw, clk->safe_parent_index);
+ clk->old_rate = clk->rate;
+ break;
+ case POST_RATE_CHANGE:
+ if (clk->safe_parent) {
+ old_parent = __clk_set_parent_before(clk,
+ clk->new_parent);
+ if (clk->ops->set_rate_and_parent) {
+ clk->ops->set_rate_and_parent(clk->hw,
+ clk->new_rate,
+ clk->new_parent ?
+ clk->new_parent->rate : 0,
+ clk->new_parent_index);
+ } else if (clk->ops->set_parent) {
+ clk->ops->set_parent(clk->hw,
+ clk->new_parent_index);
+ }
+ __clk_set_parent_after(clk, clk->new_parent,
+ old_parent);
+ }
+ break;
+ }
+
if (clk->notifier_count) {
- ret = __clk_notify(clk, event, clk->rate, clk->new_rate);
- if (ret & NOTIFY_STOP_MASK)
+ if (event != POST_RATE_CHANGE || clk->old_rate != clk->rate)
+ ret = __clk_notify(clk, event, clk->old_rate,
+ clk->new_rate);
+ if (ret & NOTIFY_STOP_MASK && event != POST_RATE_CHANGE)
fail_clk = clk;
}
@@ -1763,7 +1808,8 @@ clk_change_rate(struct clk_core *clk, un
old_rate = clk->rate;
- if (clk->new_parent && clk->new_parent != clk->parent) {
+ if (clk->new_parent && clk->new_parent != clk->parent &&
+ !clk->safe_parent) {
old_parent = __clk_set_parent_before(clk, clk->new_parent);
trace_clk_set_parent(clk, clk->new_parent);
@@ -1789,9 +1835,6 @@ clk_change_rate(struct clk_core *clk, un
clk->rate = clk->new_rate;
- if (clk->notifier_count && old_rate != clk->rate)
- __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
-
/*
* Use safe iteration, as change_rate can actually swap parents
* for certain clock types.
@@ -1851,6 +1894,8 @@ static int clk_core_set_rate_nolock(stru
clk->req_rate = req_rate;
+ clk_propagate_rate_change(top, POST_RATE_CHANGE);
+
return ret;
}
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -183,6 +183,7 @@ struct clk_ops {
struct clk_hw **best_parent_hw);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
+ struct clk_hw *(*get_safe_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
int (*set_rate_and_parent)(struct clk_hw *hw,

205
target/linux/ipq806x/patches-4.1/141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
View file

@ -1,205 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,10/13] clk: qcom: Add KPSS ACC/GCC driver
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063201
Message-Id: <1426920332-9340-11-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
Date: Fri, 20 Mar 2015 23:45:29 -0700
The ACC and GCC regions present in KPSSv1 contain registers to
control clocks and power to each Krait CPU and L2. For CPUfreq
purposes probe these devices and expose a mux clock that chooses
between PXO and PLL8.
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
.../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 7 ++
.../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt | 28 +++++++
drivers/clk/qcom/Kconfig | 8 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/kpss-xcc.c | 95 ++++++++++++++++++++++
5 files changed, 139 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
create mode 100644 drivers/clk/qcom/kpss-xcc.c
--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
@@ -21,10 +21,17 @@ PROPERTIES
the register region. An optional second element specifies
the base address and size of the alias register region.
+- clock-output-names:
+ Usage: optional
+ Value type: <string>
+ Definition: Name of the output clock. Typically acpuX_aux where X is a
+ CPU number starting at 0.
+
Example:
clock-controller@2088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0x02088000 0x1000>,
<0x02008000 0x1000>;
+ clock-output-names = "acpu0_aux";
};
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
@@ -0,0 +1,28 @@
+Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: should be one of:
+ "qcom,kpss-gcc"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address and size of the register region
+
+- clock-output-names:
+ Usage: required
+ Value type: <string>
+ Definition: Name of the output clock. Typically acpu_l2_aux indicating
+ an L2 cache auxiliary clock.
+
+Example:
+
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc";
+ reg = <0x2011000 0x1000>;
+ clock-output-names = "acpu_l2_aux";
+ };
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -106,6 +106,14 @@ config QCOM_HFPLL
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
+config KPSS_XCC
+ tristate "KPSS Clock Controller"
+ depends on COMMON_CLK_QCOM
+ help
+ Support for the Krait ACC and GCC clock controllers. Say Y
+ if you want to support CPU frequency scaling on devices such
+ as MSM8960, APQ8064, etc.
+
config KRAIT_CLOCKS
bool
select KRAIT_L2_ACCESSORS
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -23,4 +23,5 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm896
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
--- /dev/null
+++ b/drivers/clk/qcom/kpss-xcc.c
@@ -0,0 +1,95 @@
+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+static const char *aux_parents[] = {
+ "pll8_vote",
+ "pxo",
+};
+
+static unsigned int aux_parent_map[] = {
+ 3,
+ 0,
+};
+
+static const struct of_device_id kpss_xcc_match_table[] = {
+ { .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL },
+ { .compatible = "qcom,kpss-gcc" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, kpss_xcc_match_table);
+
+static int kpss_xcc_driver_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *id;
+ struct clk *clk;
+ struct resource *res;
+ void __iomem *base;
+ const char *name;
+
+ id = of_match_device(kpss_xcc_match_table, &pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ if (id->data) {
+ if (of_property_read_string_index(pdev->dev.of_node,
+ "clock-output-names", 0, &name))
+ return -ENODEV;
+ base += 0x14;
+ } else {
+ name = "acpu_l2_aux";
+ base += 0x28;
+ }
+
+ clk = clk_register_mux_table(&pdev->dev, name, aux_parents,
+ ARRAY_SIZE(aux_parents), 0, base, 0, 0x3,
+ 0, aux_parent_map, NULL);
+
+ platform_set_drvdata(pdev, clk);
+
+ return PTR_ERR_OR_ZERO(clk);
+}
+
+static int kpss_xcc_driver_remove(struct platform_device *pdev)
+{
+ clk_unregister_mux(platform_get_drvdata(pdev));
+ return 0;
+}
+
+static struct platform_driver kpss_xcc_driver = {
+ .probe = kpss_xcc_driver_probe,
+ .remove = kpss_xcc_driver_remove,
+ .driver = {
+ .name = "kpss-xcc",
+ .of_match_table = kpss_xcc_match_table,
+ },
+};
+module_platform_driver(kpss_xcc_driver);
+
+MODULE_DESCRIPTION("Krait Processor Sub System (KPSS) Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:kpss-xcc");

435
target/linux/ipq806x/patches-4.1/142-clk-qcom-Add-Krait-clock-controller-driver.patch
View file

@ -1,435 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,11/13] clk: qcom: Add Krait clock controller driver
From: Stephen Boyd <sboyd@codeaurora.org>
X-Patchwork-Id: 6063121
Message-Id: <1426920332-9340-12-git-send-email-sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
Date: Fri, 20 Mar 2015 23:45:30 -0700
The Krait CPU clocks are made up of a primary mux and secondary
mux for each CPU and the L2, controlled via cp15 accessors. For
Kraits within KPSSv1 each secondary mux accepts a different aux
source, but on KPSSv2 each secondary mux accepts the same aux
source.
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
.../devicetree/bindings/clock/qcom,krait-cc.txt | 22 ++
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/krait-cc.c | 352 +++++++++++++++++++++
4 files changed, 383 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
create mode 100644 drivers/clk/qcom/krait-cc.c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
@@ -0,0 +1,22 @@
+Krait Clock Controller
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,krait-cc-v1"
+ "qcom,krait-cc-v2"
+
+- #clock-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+Example:
+
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ #clock-cells = <1>;
+ };
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -114,6 +114,14 @@ config KPSS_XCC
if you want to support CPU frequency scaling on devices such
as MSM8960, APQ8064, etc.
+config KRAITCC
+ tristate "Krait Clock Controller"
+ depends on COMMON_CLK_QCOM && ARM
+ select KRAIT_CLOCKS
+ help
+ Support for the Krait CPU clocks on Qualcomm devices.
+ Say Y if you want to support CPU frequency scaling.
+
config KRAIT_CLOCKS
bool
select KRAIT_L2_ACCESSORS
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+obj-$(CONFIG_KRAITCC) += krait-cc.o
--- /dev/null
+++ b/drivers/clk/qcom/krait-cc.c
@@ -0,0 +1,352 @@
+/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+
+#include "clk-krait.h"
+
+static unsigned int sec_mux_map[] = {
+ 2,
+ 0,
+};
+
+static unsigned int pri_mux_map[] = {
+ 1,
+ 2,
+ 0,
+};
+
+static int
+krait_add_div(struct device *dev, int id, const char *s, unsigned offset)
+{
+ struct krait_div2_clk *div;
+ struct clk_init_data init = {
+ .num_parents = 1,
+ .ops = &krait_div2_clk_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ };
+ const char *p_names[1];
+ struct clk *clk;
+
+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return -ENOMEM;
+
+ div->width = 2;
+ div->shift = 6;
+ div->lpl = id >= 0;
+ div->offset = offset;
+ div->hw.init = &init;
+
+ init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
+ if (!init.name)
+ return -ENOMEM;
+
+ init.parent_names = p_names;
+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
+ if (!p_names[0]) {
+ kfree(init.name);
+ return -ENOMEM;
+ }
+
+ clk = devm_clk_register(dev, &div->hw);
+ kfree(p_names[0]);
+ kfree(init.name);
+
+ return PTR_ERR_OR_ZERO(clk);
+}
+
+static int
+krait_add_sec_mux(struct device *dev, int id, const char *s, unsigned offset,
+ bool unique_aux)
+{
+ struct krait_mux_clk *mux;
+ static const char *sec_mux_list[] = {
+ "acpu_aux",
+ "qsb",
+ };
+ struct clk_init_data init = {
+ .parent_names = sec_mux_list,
+ .num_parents = ARRAY_SIZE(sec_mux_list),
+ .ops = &krait_mux_clk_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ };
+ struct clk *clk;
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
+ mux->offset = offset;
+ mux->lpl = id >= 0;
+ mux->has_safe_parent = true;
+ mux->safe_sel = 2;
+ mux->mask = 0x3;
+ mux->shift = 2;
+ mux->parent_map = sec_mux_map;
+ mux->hw.init = &init;
+
+ init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
+ if (!init.name)
+ return -ENOMEM;
+
+ if (unique_aux) {
+ sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
+ if (!sec_mux_list[0]) {
+ clk = ERR_PTR(-ENOMEM);
+ goto err_aux;
+ }
+ }
+
+ clk = devm_clk_register(dev, &mux->hw);
+
+ if (unique_aux)
+ kfree(sec_mux_list[0]);
+err_aux:
+ kfree(init.name);
+ return PTR_ERR_OR_ZERO(clk);
+}
+
+static struct clk *
+krait_add_pri_mux(struct device *dev, int id, const char *s, unsigned offset)
+{
+ struct krait_mux_clk *mux;
+ const char *p_names[3];
+ struct clk_init_data init = {
+ .parent_names = p_names,
+ .num_parents = ARRAY_SIZE(p_names),
+ .ops = &krait_mux_clk_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ };
+ struct clk *clk;
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ mux->has_safe_parent = true;
+ mux->safe_sel = 0;
+ mux->mask = 0x3;
+ mux->shift = 0;
+ mux->offset = offset;
+ mux->lpl = id >= 0;
+ mux->parent_map = pri_mux_map;
+ mux->hw.init = &init;
+
+ init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
+ if (!init.name)
+ return ERR_PTR(-ENOMEM);
+
+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
+ if (!p_names[0]) {
+ clk = ERR_PTR(-ENOMEM);
+ goto err_p0;
+ }
+
+ p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
+ if (!p_names[1]) {
+ clk = ERR_PTR(-ENOMEM);
+ goto err_p1;
+ }
+
+ p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
+ if (!p_names[2]) {
+ clk = ERR_PTR(-ENOMEM);
+ goto err_p2;
+ }
+
+ clk = devm_clk_register(dev, &mux->hw);
+
+ kfree(p_names[2]);
+err_p2:
+ kfree(p_names[1]);
+err_p1:
+ kfree(p_names[0]);
+err_p0:
+ kfree(init.name);
+ return clk;
+}
+
+/* id < 0 for L2, otherwise id == physical CPU number */
+static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux)
+{
+ int ret;
+ unsigned offset;
+ void *p = NULL;
+ const char *s;
+ struct clk *clk;
+
+ if (id >= 0) {
+ offset = 0x4501 + (0x1000 * id);
+ s = p = kasprintf(GFP_KERNEL, "%d", id);
+ if (!s)
+ return ERR_PTR(-ENOMEM);
+ } else {
+ offset = 0x500;
+ s = "_l2";
+ }
+
+ ret = krait_add_div(dev, id, s, offset);
+ if (ret) {
+ clk = ERR_PTR(ret);
+ goto err;
+ }
+
+ ret = krait_add_sec_mux(dev, id, s, offset, unique_aux);
+ if (ret) {
+ clk = ERR_PTR(ret);
+ goto err;
+ }
+
+ clk = krait_add_pri_mux(dev, id, s, offset);
+err:
+ kfree(p);
+ return clk;
+}
+
+static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data)
+{
+ unsigned int idx = clkspec->args[0];
+ struct clk **clks = data;
+
+ if (idx >= 5) {
+ pr_err("%s: invalid clock index %d\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return clks[idx] ? : ERR_PTR(-ENODEV);
+}
+
+static const struct of_device_id krait_cc_match_table[] = {
+ { .compatible = "qcom,krait-cc-v1", (void *)1UL },
+ { .compatible = "qcom,krait-cc-v2" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, krait_cc_match_table);
+
+static int krait_cc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *id;
+ unsigned long cur_rate, aux_rate;
+ int cpu;
+ struct clk *clk;
+ struct clk **clks;
+ struct clk *l2_pri_mux_clk;
+
+ id = of_match_device(krait_cc_match_table, dev);
+ if (!id)
+ return -ENODEV;
+
+ /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */
+ clk = clk_register_fixed_rate(dev, "qsb", NULL, CLK_IS_ROOT, 1);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ if (!id->data) {
+ clk = clk_register_fixed_factor(dev, "acpu_aux",
+ "gpll0_vote", 0, 1, 2);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+ }
+
+ /* Krait configurations have at most 4 CPUs and one L2 */
+ clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL);
+ if (!clks)
+ return -ENOMEM;
+
+ for_each_possible_cpu(cpu) {
+ clk = krait_add_clks(dev, cpu, id->data);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+ clks[cpu] = clk;
+ }
+
+ l2_pri_mux_clk = krait_add_clks(dev, -1, id->data);
+ if (IS_ERR(l2_pri_mux_clk))
+ return PTR_ERR(l2_pri_mux_clk);
+ clks[4] = l2_pri_mux_clk;
+
+ /*
+ * We don't want the CPU or L2 clocks to be turned off at late init
+ * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the
+ * refcount of these clocks. Any cpufreq/hotplug manager can assume
+ * that the clocks have already been prepared and enabled by the time
+ * they take over.
+ */
+ for_each_online_cpu(cpu) {
+ clk_prepare_enable(l2_pri_mux_clk);
+ WARN(clk_prepare_enable(clks[cpu]),
+ "Unable to turn on CPU%d clock", cpu);
+ }
+
+ /*
+ * Force reinit of HFPLLs and muxes to overwrite any potential
+ * incorrect configuration of HFPLLs and muxes by the bootloader.
+ * While at it, also make sure the cores are running at known rates
+ * and print the current rate.
+ *
+ * The clocks are set to aux clock rate first to make sure the
+ * secondary mux is not sourcing off of QSB. The rate is then set to
+ * two different rates to force a HFPLL reinit under all
+ * circumstances.
+ */
+ cur_rate = clk_get_rate(l2_pri_mux_clk);
+ aux_rate = 384000000;
+ if (cur_rate == 1) {
+ pr_info("L2 @ QSB rate. Forcing new rate.\n");
+ cur_rate = aux_rate;
+ }
+ clk_set_rate(l2_pri_mux_clk, aux_rate);
+ clk_set_rate(l2_pri_mux_clk, 2);
+ clk_set_rate(l2_pri_mux_clk, cur_rate);
+ pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000);
+ for_each_possible_cpu(cpu) {
+ clk = clks[cpu];
+ cur_rate = clk_get_rate(clk);
+ if (cur_rate == 1) {
+ pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu);
+ cur_rate = aux_rate;
+ }
+ clk_set_rate(clk, aux_rate);
+ clk_set_rate(clk, 2);
+ clk_set_rate(clk, cur_rate);
+ pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000);
+ }
+
+ of_clk_add_provider(dev->of_node, krait_of_get, clks);
+
+ return 0;
+}
+
+static struct platform_driver krait_cc_driver = {
+ .probe = krait_cc_probe,
+ .driver = {
+ .name = "krait-cc",
+ .of_match_table = krait_cc_match_table,
+ },
+};
+module_platform_driver(krait_cc_driver);
+
+MODULE_DESCRIPTION("Krait CPU Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:krait-cc");

76
target/linux/ipq806x/patches-4.1/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
View file

@ -1,76 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v6,1/2] dt/bindings: qcom_adm: Fix channel specifiers
From: Andy Gross <agross@codeaurora.org>
X-Patchwork-Id: 6027361
Message-Id: <1426571172-9711-2-git-send-email-agross@codeaurora.org>
To: Vinod Koul <vinod.koul@intel.com>
Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@sonymobile.com>,
Andy Gross <agross@codeaurora.org>
Date: Tue, 17 Mar 2015 00:46:11 -0500
This patch removes the crci information from the dma channel property. At least
one client device requires using more than one CRCI value for a channel. This
does not match the current binding and the crci information needs to be removed.
Instead, the client device will provide this information via other means.
Signed-off-by: Andy Gross <agross@codeaurora.org>
---
Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
@@ -4,8 +4,7 @@ Required properties:
- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
- reg: Address range for DMA registers
- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
- denotes CRCI (client rate control interface) flow control assignment.
+- #dma-cells: must be <1>. First cell denotes the channel number.
- clocks: Should contain the core clock and interface clock.
- clock-names: Must contain "core" for the core clock and "iface" for the
interface clock.
@@ -22,7 +21,7 @@ Example:
compatible = "qcom,adm";
reg = <0x18300000 0x100000>;
interrupts = <0 170 0>;
- #dma-cells = <2>;
+ #dma-cells = <1>;
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
clock-names = "core", "iface";
@@ -35,15 +34,12 @@ Example:
qcom,ee = <0>;
};
-DMA clients must use the format descripted in the dma.txt file, using a three
+DMA clients must use the format descripted in the dma.txt file, using a two
cell specifier for each channel.
-Each dmas request consists of 3 cells:
+Each dmas request consists of two cells:
1. phandle pointing to the DMA controller
2. channel number
- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
- The CRCI is used for flow control. It identifies the peripheral device that
- is the source/destination for the transferred data.
Example:
@@ -56,7 +52,7 @@ Example:
cs-gpios = <&qcom_pinmux 20 0>;
- dmas = <&adm_dma 6 9>,
- <&adm_dma 5 10>;
+ dmas = <&adm_dma 6>,
+ <&adm_dma 5>;
dma-names = "rx", "tx";
};

82
target/linux/ipq806x/patches-4.1/163-dt-bindings-qcom_nandc-Add-DT-bindings.patch
View file

@ -1,82 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,3/5] dt/bindings: qcom_nandc: Add DT bindings
From: Archit Taneja <architt@codeaurora.org>
X-Patchwork-Id: 6927141
Message-Id: <1438578498-32254-4-git-send-email-architt@codeaurora.org>
To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
cernekee@gmail.com, computersforpeace@gmail.com
Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
Archit Taneja <architt@codeaurora.org>, devicetree@vger.kernel.org
Date: Mon, 3 Aug 2015 10:38:16 +0530
Add DT bindings document for the Qualcomm NAND controller driver.
Cc: devicetree@vger.kernel.org
v3:
- Don't use '0x' when specifying nand controller address space
- Add optional property for on-flash bbt usage
Acked-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
.../devicetree/bindings/mtd/qcom_nandc.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
@@ -0,0 +1,49 @@
+* Qualcomm NAND controller
+
+Required properties:
+- compatible: should be "qcom,ebi2-nand" for IPQ806x
+- reg: MMIO address range
+- clocks: must contain core clock and always on clock
+- clock-names: must contain "core" for the core clock and "aon" for the
+ always on clock
+- dmas: DMA specifier, consisting of a phandle to the ADM DMA
+ controller node and the channel number to be used for
+ NAND. Refer to dma.txt and qcom_adm.txt for more details
+- dma-names: must be "rxtx"
+- qcom,cmd-crci: must contain the ADM command type CRCI block instance
+ number specified for the NAND controller on the given
+ platform
+- qcom,data-crci: must contain the ADM data type CRCI block instance
+ number specified for the NAND controller on the given
+ platform
+
+Optional properties:
+- nand-bus-width: bus width. Must be 8 or 16. If not present, 8 is chosen
+ as default
+
+- nand-ecc-strength: number of bits to correct per ECC step. Must be 4 or 8
+ bits. If not present, 4 is chosen as default
+- nand-on-flash-bbt: Create/use on-flash bad block table
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+nand@1ac00000 {
+ compatible = "qcom,ebi2-nandc";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
+
+ partition@0 {
+ ...
+ };
+};

51
target/linux/ipq806x/patches-4.1/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
View file

@ -1,51 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3,4/5] arm: qcom: dts: Add NAND controller node for ipq806x
From: Archit Taneja <architt@codeaurora.org>
X-Patchwork-Id: 6927121
Message-Id: <1438578498-32254-5-git-send-email-architt@codeaurora.org>
To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
cernekee@gmail.com, computersforpeace@gmail.com
Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
Archit Taneja <architt@codeaurora.org>, devicetree@vger.kernel.org
Date: Mon, 3 Aug 2015 10:38:17 +0530
The nand controller in IPQ806x is of the 'EBI2 type'. Use the corresponding
compatible string.
Cc: devicetree@vger.kernel.org
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -663,6 +663,22 @@
status = "disabled";
};
+
+ nand@1ac00000 {
+ compatible = "qcom,ebi2-nandc";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
+
+ status = "disabled";
+ };
};
sfpb_mutex: sfpb-mutex {

11
target/linux/ipq806x/patches-4.1/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch
View file

@ -1,11 +0,0 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -132,6 +132,8 @@
nand-ecc-strength = <4>;
nand-bus-width = <8>;
+
+ linux,part-probe = "qcom-smem";
};
};
};

62
target/linux/ipq806x/patches-4.1/300-arch-arm-force-ZRELADDR-on-arch-qcom.patch
View file

@ -1,62 +0,0 @@
From b12e230f09d4481424e6a5d7e2ae566b6954e83f Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Wed, 29 Apr 2015 15:21:46 -0700
Subject: [PATCH] HACK: arch: arm: force ZRELADDR on arch-qcom
ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended
on most ARM architectures. This automatically calculate ZRELADDR by
masking PHYS_OFFSET with 0xf8000000.
However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware
network accelerators, and the bootloader removes this section from the
layout passed from the ATAGS (when used).
For newer bootloader, when DT is used, this is not a problem, we just
reserve this memory in the device tree. But if the bootloader doesn't
have DT support, then ATAGS have to be used. In this case, the ARM
decompressor will position the kernel in this low mem, which will not be
in the RAM section mapped by the bootloader, which means the kernel will
freeze in the middle of the boot process trying to map the memory.
As a work around, this patch allows disabling AUTO_ZRELADDR when
ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders
which don't support device-tree, which is the case on certain early
IPQ806x based designs.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
arch/arm/Kconfig | 2 +-
arch/arm/Makefile | 2 ++
arch/arm/mach-qcom/Makefile.boot | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-qcom/Makefile.boot
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -320,7 +320,7 @@ config ARCH_MULTIPLATFORM
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR
+ select AUTO_ZRELADDR if !ARCH_QCOM
select CLKSRC_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -248,9 +248,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac
else
MACHINE :=
endif
+ifeq ($(CONFIG_ARCH_QCOM),)
ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
MACHINE :=
endif
+endif
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y+= 0x42208000

13
target/linux/ipq806x/patches-4.1/302-mtd-qcom-smem-rename-rootfs-ubi.patch
View file

@ -1,13 +0,0 @@
--- a/drivers/mtd/qcom_smem_part.c
+++ b/drivers/mtd/qcom_smem_part.c
@@ -192,6 +192,10 @@ static int parse_qcom_smem_partitions(st
m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
+ /* "rootfs" conflicts with OpenWrt auto mounting */
+ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs"))
+ m_part->name = "ubi";
+
/*
* The last SMEM partition may have its size marked as
* something like 0xffffffff, which means "until the end of the

734
target/linux/ipq806x/patches-4.1/700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch
View file

@ -1,734 +0,0 @@
From 2fbb18f85826a9ba308fedb2cf90d3a661a39fd7 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 27 Mar 2015 00:16:14 -0700
Subject: [PATCH] clk: qcom: Add support for NSS/GMAC clocks and resets
Add the NSS/GMAC clocks and the TCM clock and NSS resets.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-ipq806x.c | 594 ++++++++++++++++++++++++++-
drivers/clk/qcom/gcc-ipq806x.c.rej | 50 +++
include/dt-bindings/clock/qcom,gcc-ipq806x.h | 2 +
include/dt-bindings/reset/qcom,gcc-ipq806x.h | 43 ++
4 files changed, 688 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/qcom/gcc-ipq806x.c.rej
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -220,12 +220,47 @@ static struct clk_regmap pll14_vote = {
},
};
+#define NSS_PLL_RATE(f, _l, _m, _n, i) \
+ { \
+ .freq = f, \
+ .l = _l, \
+ .m = _m, \
+ .n = _n, \
+ .ibits = i, \
+ }
+
+static struct pll_freq_tbl pll18_freq_tbl[] = {
+ NSS_PLL_RATE(550000000, 44, 0, 1, 0x01495625),
+ NSS_PLL_RATE(733000000, 58, 16, 25, 0x014b5625),
+};
+
+static struct clk_pll pll18 = {
+ .l_reg = 0x31a4,
+ .m_reg = 0x31a8,
+ .n_reg = 0x31ac,
+ .config_reg = 0x31b4,
+ .mode_reg = 0x31a0,
+ .status_reg = 0x31b8,
+ .status_bit = 16,
+ .post_div_shift = 16,
+ .post_div_width = 1,
+ .freq_tbl = pll18_freq_tbl,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "pll18",
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
enum {
P_PXO,
P_PLL8,
P_PLL3,
P_PLL0,
P_CXO,
+ P_PLL14,
+ P_PLL18,
};
static const struct parent_map gcc_pxo_pll8_map[] = {
@@ -277,6 +312,22 @@ static const char *gcc_pxo_pll8_pll0_map
"pll0_vote",
};
+static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
+ { P_PXO, 0 },
+ { P_PLL8, 4 },
+ { P_PLL0, 2 },
+ { P_PLL14, 5 },
+ { P_PLL18, 1 },
+};
+
+static const char *gcc_pxo_pll8_pll14_pll18_pll0[] = {
+ "pxo",
+ "pll8_vote",
+ "pll0_vote",
+ "pll14",
+ "pll18",
+};
+
static struct freq_tbl clk_tbl_gsbi_uart[] = {
{ 1843200, P_PLL8, 2, 6, 625 },
{ 3686400, P_PLL8, 2, 12, 625 },
@@ -2282,6 +2333,472 @@ static struct clk_branch ebi2_aon_clk =
},
};
+static const struct freq_tbl clk_tbl_gmac[] = {
+ { 133000000, P_PLL0, 1, 50, 301 },
+ { 266000000, P_PLL0, 1, 127, 382 },
+ { }
+};
+
+static struct clk_dyn_rcg gmac_core1_src = {
+ .ns_reg[0] = 0x3cac,
+ .ns_reg[1] = 0x3cb0,
+ .md_reg[0] = 0x3ca4,
+ .md_reg[1] = 0x3ca8,
+ .bank_reg = 0x3ca0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3ca0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core1_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core1_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 4,
+ .hwcg_reg = 0x3cb4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cb4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core1_clk",
+ .parent_names = (const char *[]){
+ "gmac_core1_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core2_src = {
+ .ns_reg[0] = 0x3ccc,
+ .ns_reg[1] = 0x3cd0,
+ .md_reg[0] = 0x3cc4,
+ .md_reg[1] = 0x3cc8,
+ .bank_reg = 0x3ca0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3cc0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core2_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core2_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 5,
+ .hwcg_reg = 0x3cd4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cd4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core2_clk",
+ .parent_names = (const char *[]){
+ "gmac_core2_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core3_src = {
+ .ns_reg[0] = 0x3cec,
+ .ns_reg[1] = 0x3cf0,
+ .md_reg[0] = 0x3ce4,
+ .md_reg[1] = 0x3ce8,
+ .bank_reg = 0x3ce0,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3ce0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core3_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core3_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 6,
+ .hwcg_reg = 0x3cf4,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3cf4,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core3_clk",
+ .parent_names = (const char *[]){
+ "gmac_core3_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static struct clk_dyn_rcg gmac_core4_src = {
+ .ns_reg[0] = 0x3d0c,
+ .ns_reg[1] = 0x3d10,
+ .md_reg[0] = 0x3d04,
+ .md_reg[1] = 0x3d08,
+ .bank_reg = 0x3d00,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_gmac,
+ .clkr = {
+ .enable_reg = 0x3d00,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core4_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch gmac_core4_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 7,
+ .hwcg_reg = 0x3d14,
+ .hwcg_bit = 6,
+ .clkr = {
+ .enable_reg = 0x3d14,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "gmac_core4_clk",
+ .parent_names = (const char *[]){
+ "gmac_core4_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static const struct freq_tbl clk_tbl_nss_tcm[] = {
+ { 266000000, P_PLL0, 3, 0, 0 },
+ { 400000000, P_PLL0, 2, 0, 0 },
+ { }
+};
+
+static struct clk_dyn_rcg nss_tcm_src = {
+ .ns_reg[0] = 0x3dc4,
+ .ns_reg[1] = 0x3dc8,
+ .bank_reg = 0x3dc0,
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 4,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 4,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss_tcm,
+ .clkr = {
+ .enable_reg = 0x3dc0,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_tcm_src",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ },
+ },
+};
+
+static struct clk_branch nss_tcm_clk = {
+ .halt_reg = 0x3c20,
+ .halt_bit = 14,
+ .clkr = {
+ .enable_reg = 0x3dd0,
+ .enable_mask = BIT(6) | BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_tcm_clk",
+ .parent_names = (const char *[]){
+ "nss_tcm_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+ },
+};
+
+static const struct freq_tbl clk_tbl_nss[] = {
+ { 110000000, P_PLL18, 1, 1, 5 },
+ { 275000000, P_PLL18, 2, 0, 0 },
+ { 550000000, P_PLL18, 1, 0, 0 },
+ { 733000000, P_PLL18, 1, 0, 0 },
+ { }
+};
+
+static struct clk_dyn_rcg ubi32_core1_src_clk = {
+ .ns_reg[0] = 0x3d2c,
+ .ns_reg[1] = 0x3d30,
+ .md_reg[0] = 0x3d24,
+ .md_reg[1] = 0x3d28,
+ .bank_reg = 0x3d20,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss,
+ .clkr = {
+ .enable_reg = 0x3d20,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_core1_src_clk",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+ },
+};
+
+static struct clk_dyn_rcg ubi32_core2_src_clk = {
+ .ns_reg[0] = 0x3d4c,
+ .ns_reg[1] = 0x3d50,
+ .md_reg[0] = 0x3d44,
+ .md_reg[1] = 0x3d48,
+ .bank_reg = 0x3d40,
+ .mn[0] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .mn[1] = {
+ .mnctr_en_bit = 8,
+ .mnctr_reset_bit = 7,
+ .mnctr_mode_shift = 5,
+ .n_val_shift = 16,
+ .m_val_shift = 16,
+ .width = 8,
+ },
+ .s[0] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .s[1] = {
+ .src_sel_shift = 0,
+ .parent_map = gcc_pxo_pll8_pll14_pll18_pll0_map,
+ },
+ .p[0] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .p[1] = {
+ .pre_div_shift = 3,
+ .pre_div_width = 2,
+ },
+ .mux_sel_bit = 0,
+ .freq_tbl = clk_tbl_nss,
+ .clkr = {
+ .enable_reg = 0x3d40,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_core2_src_clk",
+ .parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+ .num_parents = 5,
+ .ops = &clk_dyn_rcg_ops,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+ },
+};
+
static struct clk_regmap *gcc_ipq806x_clks[] = {
[PLL0] = &pll0.clkr,
[PLL0_VOTE] = &pll0_vote,
@@ -2291,6 +2808,7 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL8_VOTE] = &pll8_vote,
[PLL14] = &pll14.clkr,
[PLL14_VOTE] = &pll14_vote,
+ [PLL18] = &pll18.clkr,
[GSBI1_UART_SRC] = &gsbi1_uart_src.clkr,
[GSBI1_UART_CLK] = &gsbi1_uart_clk.clkr,
[GSBI2_UART_SRC] = &gsbi2_uart_src.clkr,
@@ -2390,6 +2908,18 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL9] = &hfpll0.clkr,
[PLL10] = &hfpll1.clkr,
[PLL12] = &hfpll_l2.clkr,
+ [GMAC_CORE1_CLK_SRC] = &gmac_core1_src.clkr,
+ [GMAC_CORE1_CLK] = &gmac_core1_clk.clkr,
+ [GMAC_CORE2_CLK_SRC] = &gmac_core2_src.clkr,
+ [GMAC_CORE2_CLK] = &gmac_core2_clk.clkr,
+ [GMAC_CORE3_CLK_SRC] = &gmac_core3_src.clkr,
+ [GMAC_CORE3_CLK] = &gmac_core3_clk.clkr,
+ [GMAC_CORE4_CLK_SRC] = &gmac_core4_src.clkr,
+ [GMAC_CORE4_CLK] = &gmac_core4_clk.clkr,
+ [UBI32_CORE1_CLK_SRC] = &ubi32_core1_src_clk.clkr,
+ [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
+ [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
+ [NSSTCM_CLK] = &nss_tcm_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
@@ -2508,6 +3038,48 @@ static const struct qcom_reset_map gcc_i
[USB30_1_PHY_RESET] = { 0x3b58, 0 },
[NSSFB0_RESET] = { 0x3b60, 6 },
[NSSFB1_RESET] = { 0x3b60, 7 },
+ [UBI32_CORE1_CLKRST_CLAMP_RESET] = { 0x3d3c, 3},
+ [UBI32_CORE1_CLAMP_RESET] = { 0x3d3c, 2 },
+ [UBI32_CORE1_AHB_RESET] = { 0x3d3c, 1 },
+ [UBI32_CORE1_AXI_RESET] = { 0x3d3c, 0 },
+ [UBI32_CORE2_CLKRST_CLAMP_RESET] = { 0x3d5c, 3 },
+ [UBI32_CORE2_CLAMP_RESET] = { 0x3d5c, 2 },
+ [UBI32_CORE2_AHB_RESET] = { 0x3d5c, 1 },
+ [UBI32_CORE2_AXI_RESET] = { 0x3d5c, 0 },
+ [GMAC_CORE1_RESET] = { 0x3cbc, 0 },
+ [GMAC_CORE2_RESET] = { 0x3cdc, 0 },
+ [GMAC_CORE3_RESET] = { 0x3cfc, 0 },
+ [GMAC_CORE4_RESET] = { 0x3d1c, 0 },
+ [GMAC_AHB_RESET] = { 0x3e24, 0 },
+ [NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 },
+ [NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 },
+ [NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 },
+ [NSS_CH0_HW_RST_RX_125M_N_RESET] = { 0x3b60, 3 },
+ [NSS_CH0_RST_TX_125M_N_RESET] = { 0x3b60, 4 },
+ [NSS_CH1_RST_RX_CLK_N_RESET] = { 0x3b60, 5 },
+ [NSS_CH1_RST_TX_CLK_N_RESET] = { 0x3b60, 6 },
+ [NSS_CH1_RST_RX_125M_N_RESET] = { 0x3b60, 7 },
+ [NSS_CH1_HW_RST_RX_125M_N_RESET] = { 0x3b60, 8 },
+ [NSS_CH1_RST_TX_125M_N_RESET] = { 0x3b60, 9 },
+ [NSS_CH2_RST_RX_CLK_N_RESET] = { 0x3b60, 10 },
+ [NSS_CH2_RST_TX_CLK_N_RESET] = { 0x3b60, 11 },
+ [NSS_CH2_RST_RX_125M_N_RESET] = { 0x3b60, 12 },
+ [NSS_CH2_HW_RST_RX_125M_N_RESET] = { 0x3b60, 13 },
+ [NSS_CH2_RST_TX_125M_N_RESET] = { 0x3b60, 14 },
+ [NSS_CH3_RST_RX_CLK_N_RESET] = { 0x3b60, 15 },
+ [NSS_CH3_RST_TX_CLK_N_RESET] = { 0x3b60, 16 },
+ [NSS_CH3_RST_RX_125M_N_RESET] = { 0x3b60, 17 },
+ [NSS_CH3_HW_RST_RX_125M_N_RESET] = { 0x3b60, 18 },
+ [NSS_CH3_RST_TX_125M_N_RESET] = { 0x3b60, 19 },
+ [NSS_RST_RX_250M_125M_N_RESET] = { 0x3b60, 20 },
+ [NSS_RST_TX_250M_125M_N_RESET] = { 0x3b60, 21 },
+ [NSS_QSGMII_TXPI_RST_N_RESET] = { 0x3b60, 22 },
+ [NSS_QSGMII_CDR_RST_N_RESET] = { 0x3b60, 23 },
+ [NSS_SGMII2_CDR_RST_N_RESET] = { 0x3b60, 24 },
+ [NSS_SGMII3_CDR_RST_N_RESET] = { 0x3b60, 25 },
+ [NSS_CAL_PRBS_RST_N_RESET] = { 0x3b60, 26 },
+ [NSS_LCKDT_RST_N_RESET] = { 0x3b60, 27 },
+ [NSS_SRDS_N_RESET] = { 0x3b60, 28 },
};
static const struct regmap_config gcc_ipq806x_regmap_config = {
@@ -2536,6 +3108,8 @@ static int gcc_ipq806x_probe(struct plat
{
struct clk *clk;
struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret;
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
@@ -2546,7 +3120,25 @@ static int gcc_ipq806x_probe(struct plat
if (IS_ERR(clk))
return PTR_ERR(clk);
- return qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
+ if (ret)
+ return ret;
+
+ regmap = dev_get_regmap(dev, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ /* Setup PLL18 static bits */
+ regmap_update_bits(regmap, 0x31a4, 0xffffffc0, 0x40000400);
+ regmap_write(regmap, 0x31b0, 0x3080);
+
+ /* Set GMAC footswitch sleep/wakeup values */
+ regmap_write(regmap, 0x3cb8, 8);
+ regmap_write(regmap, 0x3cd8, 8);
+ regmap_write(regmap, 0x3cf8, 8);
+ regmap_write(regmap, 0x3d18, 8);
+
+ return 0;
}
static int gcc_ipq806x_remove(struct platform_device *pdev)
--- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -129,4 +129,47 @@
#define USB30_1_PHY_RESET 112
#define NSSFB0_RESET 113
#define NSSFB1_RESET 114
+#define UBI32_CORE1_CLKRST_CLAMP_RESET 115
+#define UBI32_CORE1_CLAMP_RESET 116
+#define UBI32_CORE1_AHB_RESET 117
+#define UBI32_CORE1_AXI_RESET 118
+#define UBI32_CORE2_CLKRST_CLAMP_RESET 119
+#define UBI32_CORE2_CLAMP_RESET 120
+#define UBI32_CORE2_AHB_RESET 121
+#define UBI32_CORE2_AXI_RESET 122
+#define GMAC_CORE1_RESET 123
+#define GMAC_CORE2_RESET 124
+#define GMAC_CORE3_RESET 125
+#define GMAC_CORE4_RESET 126
+#define GMAC_AHB_RESET 127
+#define NSS_CH0_RST_RX_CLK_N_RESET 128
+#define NSS_CH0_RST_TX_CLK_N_RESET 129
+#define NSS_CH0_RST_RX_125M_N_RESET 130
+#define NSS_CH0_HW_RST_RX_125M_N_RESET 131
+#define NSS_CH0_RST_TX_125M_N_RESET 132
+#define NSS_CH1_RST_RX_CLK_N_RESET 133
+#define NSS_CH1_RST_TX_CLK_N_RESET 134
+#define NSS_CH1_RST_RX_125M_N_RESET 135
+#define NSS_CH1_HW_RST_RX_125M_N_RESET 136
+#define NSS_CH1_RST_TX_125M_N_RESET 137
+#define NSS_CH2_RST_RX_CLK_N_RESET 138
+#define NSS_CH2_RST_TX_CLK_N_RESET 139
+#define NSS_CH2_RST_RX_125M_N_RESET 140
+#define NSS_CH2_HW_RST_RX_125M_N_RESET 141
+#define NSS_CH2_RST_TX_125M_N_RESET 142
+#define NSS_CH3_RST_RX_CLK_N_RESET 143
+#define NSS_CH3_RST_TX_CLK_N_RESET 144
+#define NSS_CH3_RST_RX_125M_N_RESET 145
+#define NSS_CH3_HW_RST_RX_125M_N_RESET 146
+#define NSS_CH3_RST_TX_125M_N_RESET 147
+#define NSS_RST_RX_250M_125M_N_RESET 148
+#define NSS_RST_TX_250M_125M_N_RESET 149
+#define NSS_QSGMII_TXPI_RST_N_RESET 150
+#define NSS_QSGMII_CDR_RST_N_RESET 151
+#define NSS_SGMII2_CDR_RST_N_RESET 152
+#define NSS_SGMII3_CDR_RST_N_RESET 153
+#define NSS_CAL_PRBS_RST_N_RESET 154
+#define NSS_LCKDT_RST_N_RESET 155
+#define NSS_SRDS_N_RESET 156
+
#endif
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -289,5 +289,7 @@
#define UBI32_CORE1_CLK 279
#define UBI32_CORE2_CLK 280
#define EBI2_AON_CLK 281
+#define NSSTCM_CLK_SRC 282
+#define NSSTCM_CLK 283
#endif

2355
target/linux/ipq806x/patches-4.1/701-stmmac_update_to_4.3.patch
View file

File diff suppressed because it is too large Load diff

31
target/linux/ipq806x/patches-4.1/709-stmac-platform-add-support-for-retreiving-mac-from-m.patch
View file

@ -1,31 +0,0 @@
From 5bf2dabde1fa3af0c9082b42b6847ef3fd198b13 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 9 Aug 2015 12:53:55 +0200
Subject: [PATCH] stmac: platform: add support for retreiving mac from mtd
---
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -116,6 +116,19 @@ stmmac_probe_config_dt(struct platform_d
return ERR_PTR(-ENOMEM);
*mac = of_get_mac_address(np);
+ if (!*mac) {
+ u8 mtd_mac[ETH_ALEN];
+ int ret;
+
+ ret = of_get_mac_address_mtd(np, mtd_mac);
+ if (ret == -EPROBE_DEFER)
+ return ERR_PTR(ret);
+
+ if (is_valid_ether_addr(mtd_mac))
+ *mac = devm_kmemdup(&pdev->dev, mtd_mac, ETH_ALEN,
+ GFP_KERNEL);
+ }
+
plat->interface = of_get_phy_mode(np);
/* Get max speed of operation from device tree */

117
target/linux/ipq806x/patches-4.1/710-stmmac-fix-ipq806x-DMA-configuration.patch
View file

@ -1,117 +0,0 @@
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -259,6 +259,7 @@ static int ipq806x_gmac_probe(struct pla
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
+ struct stmmac_dma_cfg *dma_cfg;
struct device *dev = &pdev->dev;
struct ipq806x_gmac *gmac;
int val;
@@ -348,6 +349,17 @@ static int ipq806x_gmac_probe(struct pla
plat_dat->bsp_priv = gmac;
plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
+ dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
+ GFP_KERNEL);
+
+ dma_cfg->pbl = 32;
+ dma_cfg->aal = 1;
+ dma_cfg->burst_len = DMA_AXI_BLEN_16 |
+ (7 << DMA_AXI_RD_OSR_LMT_SHIFT) |
+ (7 << DMA_AXI_WR_OSR_LMT_SHIFT);
+
+ plat_dat->dma_cfg = dma_cfg;
+
return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -73,6 +73,9 @@
| DMA_AXI_BLEN_32 | DMA_AXI_BLEN_64 \
| DMA_AXI_BLEN_128 | DMA_AXI_BLEN_256)
+#define DMA_AXI_RD_OSR_LMT_SHIFT 16
+#define DMA_AXI_WR_OSR_LMT_SHIFT 20
+
/* Platfrom data for platform device structure's platform_data field */
struct stmmac_mdio_bus_data {
@@ -88,6 +91,7 @@ struct stmmac_mdio_bus_data {
struct stmmac_dma_cfg {
int pbl;
+ int aal;
int fixed_burst;
int mixed_burst;
int burst_len;
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -31,7 +31,8 @@
#include "dwmac_dma.h"
static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds,
+ int aal)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int limit;
@@ -62,6 +63,10 @@ static int dwmac1000_dma_init(void __iom
value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
(pbl << DMA_BUS_MODE_RPBL_SHIFT));
+ /* Address Aligned Beats */
+ if (aal)
+ value |= DMA_BUS_MODE_AAL;
+
/* Set the Fixed burst mode */
if (fb)
value |= DMA_BUS_MODE_FB;
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -352,7 +352,7 @@ extern const struct stmmac_desc_ops ndes
struct stmmac_dma_ops {
/* DMA core initialization */
int (*init) (void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds);
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds, int aal);
/* Dump DMA registers */
void (*dump_regs) (void __iomem *ioaddr);
/* Set tx/rx threshold in the csr6 register
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -33,7 +33,8 @@
#include "dwmac_dma.h"
static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
- int burst_len, u32 dma_tx, u32 dma_rx, int atds)
+ int burst_len, u32 dma_tx, u32 dma_rx, int atds,
+ int aal)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int limit;
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1639,9 +1639,11 @@ static int stmmac_init_dma_engine(struct
int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_len = 0;
int mixed_burst = 0;
int atds = 0;
+ int aal = 0;
if (priv->plat->dma_cfg) {
pbl = priv->plat->dma_cfg->pbl;
+ aal = priv->plat->dma_cfg->aal;
fixed_burst = priv->plat->dma_cfg->fixed_burst;
mixed_burst = priv->plat->dma_cfg->mixed_burst;
burst_len = priv->plat->dma_cfg->burst_len;
@@ -1652,7 +1654,7 @@ static int stmmac_init_dma_engine(struct
return priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
burst_len, priv->dma_tx_phy,
- priv->dma_rx_phy, atds);
+ priv->dma_rx_phy, atds, aal);
}
/**

19
target/linux/ipq806x/patches-4.1/020-add-ap148-bootargs.patch → target/linux/ipq806x/patches-4.4/020-add-ap148-bootargs.patch
View file

@ -1,6 +1,21 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -14,6 +14,14 @@
@@ -4,14 +4,6 @@
model = "Qualcomm IPQ8064/AP148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
@@ -22,6 +14,14 @@
};
};
@ -30,7 +45,7 @@
syscon-tcsr = <&tcsr>;
- serial@16340000 {
- gsbi4_serial: serial@16340000 {
+ uart4: serial@16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,

0
target/linux/ipq806x/patches-3.18/021-add-ap148-partitions.patch → target/linux/ipq806x/patches-4.4/021-add-ap148-partitions.patch
View file

2
target/linux/ipq806x/patches-4.1/022-add-db149-dts.patch → target/linux/ipq806x/patches-4.4/022-add-db149-dts.patch
View file

@ -15,7 +15,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -451,6 +451,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -506,6 +506,7 @@
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq8064-ap148.dtb \

25
target/linux/ipq806x/patches-4.1/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch → target/linux/ipq806x/patches-4.4/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
View file

@ -1,10 +1,9 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -46,15 +46,12 @@
serial@16340000 {
@@ -47,14 +47,12 @@
status = "ok";
};
-
- i2c4: i2c@16380000 {
- status = "ok";
-
@ -14,17 +13,17 @@
- pinctrl-names = "default";
- };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
};
gsbi5: gsbi@1a200000 {
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -807,7 +807,7 @@ static struct clk_rcg gsbi7_qup_src = {
@@ -294,7 +294,7 @@
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
@ -33,8 +32,8 @@
},
},
};
@@ -823,7 +823,7 @@ static struct clk_branch gsbi7_qup_clk =
.parent_names = (const char *[]){ "gsbi7_qup_src" },
@@ -312,7 +312,7 @@
},
.num_parents = 1,
.ops = &clk_branch_ops,
- .flags = CLK_SET_RATE_PARENT,
@ -42,9 +41,9 @@
},
},
};
@@ -871,7 +871,7 @@ static struct clk_branch gsbi4_h_clk = {
@@ -890,7 +890,7 @@
.hw.init = &(struct clk_init_data){
.name = "gsbi4_h_clk",
.name = "gsbi1_h_clk",
.ops = &clk_branch_ops,
- .flags = CLK_IS_ROOT,
+ .flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED,

0
target/linux/ipq806x/patches-3.18/024-ap148-add-memory-node.patch → target/linux/ipq806x/patches-4.4/024-ap148-add-memory-node.patch
View file

4
target/linux/ipq806x/patches-4.1/033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch → target/linux/ipq806x/patches-4.4/033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch
View file

@ -22,12 +22,12 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+ compatible = "syscon";
+ reg = <0x01200600 0x100>;
+ };
};
+ };
+
+ sfpb_mutex: sfpb-mutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_mutex_block 4 4>;
+
+ #hwlock-cells = <1>;
+ };
};
};

2
target/linux/ipq806x/patches-4.1/036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch → target/linux/ipq806x/patches-4.4/036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch
View file

@ -26,7 +26,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
@@ -341,4 +341,10 @@
#hwlock-cells = <1>;
};
};
+
+ smem {
+ compatible = "qcom,smem";

61
target/linux/ipq806x/patches-4.1/037-mtd-add-SMEM-parser-for-QCOM-platforms.patch → target/linux/ipq806x/patches-4.4/037-mtd-add-SMEM-parser-for-QCOM-platforms.patch
View file

@ -1,23 +1,26 @@
From 0501f76b138cf1dc11a313bb7a094da524b79337 Mon Sep 17 00:00:00 2001
From 61e8e1b1af77f24339da3f0822a76fa65ed635c6 Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Thu, 13 Aug 2015 09:53:14 -0700
Subject: [PATCH 3/3] mtd: add SMEM parser for QCOM platforms
Subject: [PATCH] mtd: add SMEM parser for QCOM platforms
On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is
used to store partition layout. This new parser can now be used to read
SMEM and use it to register an MTD layout according to its content.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
---
drivers/mtd/Kconfig | 7 ++
drivers/mtd/Makefile | 1 +
drivers/mtd/qcom_smem_part.c | 231 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 239 insertions(+)
drivers/mtd/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/mtd/qcom_smem_part.c
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index a03ad29..debc887 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -195,6 +195,13 @@ config MTD_MYLOADER_PARTS
@@ -190,6 +190,13 @@
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically.
@ -31,9 +34,24 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
comment "User Modules And Translation Layers"
#
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 99bb9a1..2a44a64 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
diff --git a/drivers/mtd/qcom_smem_part.c b/drivers/mtd/qcom_smem_part.c
new file mode 100644
index 0000000..f9c1bca
--- /dev/null
+++ b/drivers/mtd/qcom_smem_part.c
@@ -0,0 +1,231 @@
@@ -0,0 +1,228 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
@ -95,13 +113,12 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+
+static int qcom_smem_get_flash_blksz(u64 **smem_blksz)
+{
+ int ret;
+ size_t size;
+
+ ret = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE,
+ (void **) smem_blksz, &size);
+ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE,
+ &size);
+
+ if (ret < 0) {
+ if (IS_ERR(*smem_blksz)) {
+ pr_err("Unable to read flash blksz from SMEM\n");
+ return -ENOENT;
+ }
@ -116,13 +133,12 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+
+static int qcom_smem_get_flash_type(u64 **smem_flash_type)
+{
+ int ret;
+ size_t size;
+
+ ret = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE,
+ (void **) smem_flash_type, &size);
+ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE,
+ &size);
+
+ if (ret < 0) {
+ if (IS_ERR(*smem_flash_type)) {
+ pr_err("Unable to read flash type from SMEM\n");
+ return -ENOENT;
+ }
@ -137,13 +153,12 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+
+static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts)
+{
+ int ret;
+ size_t size;
+
+ ret = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE,
+ (void **) pparts, &size);
+ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE,
+ &size);
+
+ if (ret < 0) {
+ if (IS_ERR(*pparts)) {
+ pr_err("Unable to read partition table from SMEM\n");
+ return -ENOENT;
+ }
@ -265,13 +280,3 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Parsing code for SMEM based partition tables");
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o

19
target/linux/ipq806x/patches-3.18/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch → target/linux/ipq806x/patches-4.4/100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch
View file

@ -1,8 +1,8 @@
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -256,4 +256,15 @@ config PHY_STIH41X_USB
Enable this to support the USB transceiver that is part of
STMicroelectronics STiH41x SoC series.
@@ -390,4 +390,15 @@
Enable this to support the Broadcom Cygnus PCIe PHY.
If unsure, say N.
+config PHY_QCOM_DWC3
+ tristate "QCOM DWC3 USB PHY support"
@ -18,14 +18,14 @@
endmenu
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) +=
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
@@ -48,3 +48,4 @@ obj-$(CONFIG_PHY_TUSB1210) +=
obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
+obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o
--- /dev/null
+++ b/drivers/phy/phy-qcom-dwc3.c
@@ -0,0 +1,483 @@
@@ -0,0 +1,482 @@
+/* Copyright (c) 2013-2014, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
@ -476,8 +476,7 @@
+ phy_dwc3->xo_clk = NULL;
+ }
+
+ phy_dwc3->phy = devm_phy_create(phy_dwc3->dev, NULL, &qcom_dwc3_phy_ops,
+ NULL);
+ phy_dwc3->phy = devm_phy_create(phy_dwc3->dev, NULL, &qcom_dwc3_phy_ops);
+
+ if (IS_ERR(phy_dwc3->phy))
+ return PTR_ERR(phy_dwc3->phy);

5
target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch → target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
View file

@ -1,6 +1,6 @@
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -91,5 +91,29 @@
@@ -92,5 +92,29 @@
sata@29000000 {
status = "ok";
};
@ -32,7 +32,7 @@
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -296,6 +296,91 @@
@@ -333,6 +333,90 @@
compatible = "syscon";
reg = <0x01200600 0x100>;
};
@ -120,7 +120,6 @@
+ dr_mode = "host";
+ };
+ };
+
};
sfpb_mutex: sfpb-mutex {

0
target/linux/ipq806x/patches-3.18/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch → target/linux/ipq806x/patches-4.4/110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch
View file

37
target/linux/ipq806x/patches-3.18/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch → target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
View file

@ -34,25 +34,25 @@ MAINTAINERS | 7 +
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7127,6 +7127,13 @@ L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*spear*
@@ -8253,6 +8253,13 @@
F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
F: drivers/pci/host/pcie-hisi.c
+PCIE DRIVER FOR QUALCOMM MSM
+M: Stanimir Varbanov <svarbanov@mm-sol.com>
+L: linux-pci@vger.kernel.org
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: drivers/pci/host/*qcom*
+M: Stanimir Varbanov <svarbanov@mm-sol.com>
+L: linux-pci@vger.kernel.org
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: drivers/pci/host/*qcom*
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -91,4 +91,13 @@ config PCI_XGENE
There are 5 internal PCIe ports available. Each port is GEN3 capable
and have varied lanes from x1 to x8.
@@ -173,4 +173,13 @@
help
Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
+config PCIE_QCOM
+ bool "Qualcomm PCIe controller"
@ -66,7 +66,7 @@ MAINTAINERS | 7 +
endmenu
--- /dev/null
+++ b/drivers/pci/host/pcie-qcom.c
@@ -0,0 +1,677 @@
@@ -0,0 +1,676 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
@ -613,8 +613,7 @@ MAINTAINERS | 7 +
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ return dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where,
+ size, val);
+ return dw_pcie_cfg_read(pp->dbi_base + where, size, val);
+}
+
+static struct pcie_host_ops qcom_pcie_ops = {
@ -648,7 +647,7 @@ MAINTAINERS | 7 +
+
+ pcie->version = (unsigned int)match->data;
+
+ pcie->reset = devm_gpiod_get_optional(dev, "perst");
+ pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);
+ if (IS_ERR(pcie->reset) && PTR_ERR(pcie->reset) == -EPROBE_DEFER)
+ return PTR_ERR(pcie->reset);
+
@ -746,8 +745,8 @@ MAINTAINERS | 7 +
+MODULE_ALIAS("platform:qcom-pcie");
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spe
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
@@ -20,3 +20,4 @@
obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
+obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o

Some files were not shown because too many files have changed in this diff Show more