KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/package/boot
History
Ademar Arvati Filho 27b2f0fc0f kirkwood: add support for Iomega Storcenter ix2-200 
Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell
 Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of
 flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC

Specification:
- SoC: Marvell Kirkwood 88F6281
- CPU/Speed: 1000Mhz
- Flash-Chip: Hynix NAND
- Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16
- RAM: 256MB
- LAN: 1x 1000 Mbps Ethernet
- WiFi: none
- 3x USB 2.0
- UART: for serial console

Installation instructions - easy steps:
1. download factory.bin and copy into tftp server
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    setenv serverip 192.168.1.1
    setenv ipaddr 192.168.1.13
    tftpboot 0x00800000 factory.bin
    nand erase 0x100000 $(filesize)
    nand write 0x00800000 0x100000 $(filesize)
    run bootcmd
    ```
3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)

Installation steps nand bad blocks proof:
1. download initramfs-uImage and copy into usb ext2 partition
    ```
    mkfs.ext2 -L ext2 /dev/sdh1
    mount -t ext2 /dev/sdh1 /mnt
    cp initramfs-uImage /mnt/initramfs.bin
    umount /mnt
    ```
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000
    ```
3. log into openwrt and sysupgrade to install into flash
    ```
    sysupgrade -n /tmp/sysupgrade.bin
    ```
4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)

Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com>
2018-07-30 15:21:00 +02:00
..
apex ixp4xx: put apex images into image staging directory 2017-01-27 16:53:31 +01:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: update to version from 2018-02-10 2018-06-18 07:10:20 +02:00
at91bootstrap at91: Add SAMA5D2 PTC EK board 2018-05-05 06:55:22 +02:00
fconfig treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
grub2 grub2: fix packed-not-aligned error on GCC 8 2018-07-30 10:42:47 +02:00
imx-bootlets treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
kexec-tools kexec-tools: bump version to 2.0.16 2018-02-11 16:10:51 +01:00
kobs-ng kobs-ng: add header for integer definitions 2017-11-16 22:56:54 +01:00
rbcfg rbcfg: Implement CPU frequency control 2017-10-07 15:00:26 +02:00
uboot-ar71xx uboot-ar71xx: fix build error 2017-04-06 16:25:08 +02:00
uboot-at91 at91: Add SAMA5D2 PTC EK board 2018-05-05 06:55:22 +02:00
uboot-envtools kirkwood: add support for Iomega Storcenter ix2-200 2018-07-30 15:21:00 +02:00
uboot-fritz4040 ipq40xx: add target 2018-03-14 19:04:50 +01:00
uboot-imx6 uboot-imx: bump to 2018.03 which fixes the build issues with fdt64_t redefinitions 2018-07-07 18:33:57 +02:00
uboot-kirkwood uboot-kirkwood: fix malformed boot configuration 2018-06-27 08:42:54 +02:00
uboot-lantiq lantiq: rename gphy firmware 2018-02-20 19:25:17 +01:00
uboot-layerscape layerscape: support ubifs rootfs in u-boot env 2018-02-13 10:01:51 +01:00
uboot-layerscape-armv8_32b layerscape: support ubifs rootfs in u-boot env 2018-02-13 10:01:51 +01:00
uboot-mvebu uboot-mvebu: fix build on hosts lacking pkg-config 2018-05-23 09:05:55 +02:00
uboot-mxs uboot-mxs: fix build on hosts lacking pkg-config 2018-05-23 09:15:52 +02:00
uboot-omap omap: rename image for sysupgrade compatibility 2018-07-30 11:03:02 +02:00
uboot-oxnas uboot-oxnas: fix typo accidentally committed during oxnas reboot 2018-06-18 18:55:19 +02:00
uboot-sunxi uboot-sunxi: update Orange Pi R1 and Zero Plus 2018-06-18 07:10:20 +02:00
uboot-xburst treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
uboot-zynq uboot-zynq: update to 2017.03 2018-06-07 09:00:49 +02:00
yamonenv packages: mark packages depending on a target as nonshared 2017-01-24 09:45:05 +01:00