KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

kirkwood: add support for Iomega Storcenter ix2-200

Browse source 
Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell
 Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of
 flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC

Specification:
- SoC: Marvell Kirkwood 88F6281
- CPU/Speed: 1000Mhz
- Flash-Chip: Hynix NAND
- Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16
- RAM: 256MB
- LAN: 1x 1000 Mbps Ethernet
- WiFi: none
- 3x USB 2.0
- UART: for serial console

Installation instructions - easy steps:
1. download factory.bin and copy into tftp server
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    setenv serverip 192.168.1.1
    setenv ipaddr 192.168.1.13
    tftpboot 0x00800000 factory.bin
    nand erase 0x100000 $(filesize)
    nand write 0x00800000 0x100000 $(filesize)
    run bootcmd
    ```
3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)

Installation steps nand bad blocks proof:
1. download initramfs-uImage and copy into usb ext2 partition
    ```
    mkfs.ext2 -L ext2 /dev/sdh1
    mount -t ext2 /dev/sdh1 /mnt
    cp initramfs-uImage /mnt/initramfs.bin
    umount /mnt
    ```
2. access uboot environment with serial cable and run
    ```
    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000
    ```
3. log into openwrt and sysupgrade to install into flash
    ```
    sysupgrade -n /tmp/sysupgrade.bin
    ```
4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)

Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com>
This commit is contained in:
Ademar Arvati Filho 2018-07-06 00:56:58 +00:00 committed by John Crispin
parent 26dbf79f49
commit 27b2f0fc0f
8 changed files with 98 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
package/boot/uboot-envtools/files/kirkwood
View file

@ -15,6 +15,7 @@ board=$(board_name)
case "$board" in
cloudengines,pogoe02|\
cloudengines,pogoplugv4|\
iom,ix2-200|\
linksys,viper|\
raidsonic,ib-nas62x0|\
seagate,dockstar|\

3
target/linux/kirkwood/base-files/etc/board.d/01_leds
View file

@ -14,6 +14,9 @@ case "$board" in
ucidef_set_led_default "health" "health" "pogo_e02:green:health" "1"
ucidef_set_led_default "fault" "fault" "pogo_e02:orange:fault" "1"
;;
"iom,ix2-200")
ucidef_set_led_timer "health" "health" "status:white:rebuild_led" "200" "800"
;;
"linksys,audi")
ucidef_set_led_default "power" "power" "audi:green:power" "1"
;;

1
target/linux/kirkwood/base-files/etc/board.d/02_network
View file

@ -17,6 +17,7 @@ case "$board" in
"cloudengines,pogoe02"|\
"cloudengines,pogoplugv4"|\
"iom,iconnect-1.1"|\
"iom,ix2-200"|\
"raidsonic,ib-nas62x0"|\
"seagate,dockstar"|\
"seagate,goflexhome"|\

3
target/linux/kirkwood/base-files/etc/diag.sh
View file

@ -15,6 +15,9 @@ get_status_led() {
cloudengines,pogoplugv4)
status_led="pogoplugv4:green:health"
;;
iom,ix2-200)
status_led="status:white:power_led"
;;
linksys,audi)
status_led="audi:green:power"
;;

13
target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol → target/linux/kirkwood/base-files/etc/init.d/hwmon_fancontrol
View file

@ -4,17 +4,20 @@ START=98
boot() {
. /lib/functions.sh
#configuring lm85 onboard temp/fan controller to run the fan on its own
#configuring (lm85/lm63) onboard temp/fan controller to run the fan on its own
#for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
case $(board_name) in
zyxel,nsa310b)
zyxel,nsa310b)
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
echo 1 > "$path_to_hwmon/pwm1_auto_channels" # temp1 is the only one that changes
echo 23000 > "$path_to_hwmon/temp1_auto_temp_min"
echo 43000 > "$path_to_hwmon/temp1_auto_temp_max" # next step is 49600 millicelsius, or 50 celsius, 43 celsius is better
;;
;;
iom,ix2-200)
path_to_hwmon='/sys/class/hwmon/hwmon0'
echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
;;
esac
}

16
target/linux/kirkwood/image/Makefile
View file

@ -62,6 +62,22 @@ define Device/iom_iconnect-1.1
endef
TARGET_DEVICES += iom_iconnect-1.1
define Device/iom_ix2_200
DEVICE_TITLE := Iomega StorCenter ix2-200
DEVICE_DTS := kirkwood-iomega_ix2_200
DEVICE_PACKAGES += kmod-gpio-button-hotplug kmod-i2c-mv64xxx kmod-hwmon-lm63
DEVICE_TYPE:=nas
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16KiB
KERNEL_SIZE := 3072k
KERNEL_IN_UBI := 0
UBINIZE_OPTS := -E 5
IMAGE_SIZE := 32505856
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += iom_ix2_200
define Device/linksys_audi
DEVICE_TITLE := Linksys EA3500 (Audi)
DEVICE_PACKAGES := kmod-mwl8k swconfig wpad-mini kmod-gpio-button-hotplug

33
target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch Normal file
View file

@ -0,0 +1,33 @@
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -185,18 +185,18 @@
};
partition@a0000 {
- label = "env";
+ label = "u-boot environment";
reg = <0xa0000 0x20000>;
read-only;
};
partition@100000 {
- label = "uImage";
+ label = "kernel";
reg = <0x100000 0x300000>;
};
partition@400000 {
- label = "rootfs";
+ label = "ubi";
reg = <0x400000 0x1C00000>;
};
};
@@ -210,7 +210,7 @@
};
&eth0 {
- status = "okay";
+ status = "disabled";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;

33
target/linux/kirkwood/patches-4.9/103-iomega-ix2-200.patch Normal file
View file

@ -0,0 +1,33 @@
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -185,18 +185,18 @@
};
partition@a0000 {
- label = "env";
+ label = "u-boot environment";
reg = <0xa0000 0x20000>;
read-only;
};
partition@100000 {
- label = "uImage";
+ label = "kernel";
reg = <0x100000 0x300000>;
};
partition@400000 {
- label = "rootfs";
+ label = "ubi";
reg = <0x400000 0x1C00000>;
};
};
@@ -210,7 +210,7 @@
};
&eth0 {
- status = "okay";
+ status = "disabled";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;