KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ar71xx/files/arch/mips/ath79
History
John Crispin 22c5f96c6b ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 
Some u-boot versions for QCA955x change the delays based on the link speed
during boot. This usually breaks the support of other linkspeeds when
OpenWrt is booted. It also conflicts with the
at803x_platform_data::fixup_rgmii_tx_delay. OpenWrt has to set its own
values in QCA955X_GMAC_REG_ETH_CFG.

The default RGMII values from the Atheros u-boot are currently used to
preset the existing mach files. These may have to be adjusted for boards
using different values but which are not currently set them explicitely in
OpenWrt.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Christian Beier <cb@shoutrlabs.com>
Cc: Chris R Blake <chrisrblake93@gmail.com>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Cc: Matthias Schiffer <mschiffer@universe-factory.net>
Cc: Dirk Neukirchen <dirkneukirchen@web.de>
Cc: Christian Mehlis <christian@m3hlis.de>
Cc: Luka Perkov <luka@openwrt.org>
Cc: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 49029
2016-03-16 09:27:08 +00:00
..
dev-ap9x-pci.c mac80211: ath9k: enable GPIO buttons 2016-03-05 09:45:03 +00:00
dev-ap9x-pci.h mac80211: ath9k: enable GPIO buttons 2016-03-05 09:45:03 +00:00
dev-dsa.c ar71xx: add v3.18 support 2015-02-15 19:45:29 +00:00
dev-dsa.h ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
dev-eth.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
dev-eth.h ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
dev-m25p80.c ar71xx: Add ath79_register_m25p80_large to support >16MB SPI chips 2015-12-19 11:32:20 +00:00
dev-m25p80.h ar71xx: Add ath79_register_m25p80_large to support >16MB SPI chips 2015-12-19 11:32:20 +00:00
dev-nfc.c ar71xx: ar934x_nfc: fix memory initialization bug 2014-03-12 12:52:36 +00:00
dev-nfc.h ar71xx: add ath79_nfc_set_ecc_mode helper 2013-09-19 18:43:42 +00:00
Kconfig.openwrt ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
mach-alfa-ap96.c ar71xx: add linux 3.14 support 2014-08-07 12:40:53 +00:00
mach-alfa-nx.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-all0258n.c ar71xx: remove the built-in MTD map of the ALL0258N 2012-07-03 15:24:01 +00:00
mach-all0315n.c ar71xx: all0315n: fix ethernet according to vendor info 2012-08-29 10:37:54 +00:00
mach-antminer-s1.c ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power 2015-10-26 09:01:28 +00:00
mach-antminer-s3.c ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power 2015-10-26 09:01:28 +00:00
mach-antrouter-r1.c V2 ar71xx : Add Support for the Bitmain Antrouter R1 2016-01-01 21:21:13 +00:00
mach-ap83.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-ap96.c ar71xx: remove the built-in MTD map of the AP96 board 2012-03-27 19:38:07 +00:00
mach-ap113.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-ap132.c ar71xx: add kernel support for Atheros AP132 Reference Board 2013-01-29 19:12:30 +00:00
mach-ap143.c ar71xx: add support for ap143 2015-07-07 08:06:05 +00:00
mach-ap147.c ar71xx: Add support for AP147-010 reference board 2015-07-24 09:09:42 +00:00
mach-ap152.c ar71xx: fix ap152 support 2016-01-10 17:19:34 +00:00
mach-archer-c7.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-arduino-yun.c ar71xx: Arduino Yun board 'WLAN RST' button support 2016-03-10 19:11:13 +00:00
mach-aw-nr580.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-bhu-bxu2000n2-a.c ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board 2013-10-30 06:50:57 +00:00
mach-bsb.c ar71xx: Add support for Black Swift 2015-08-17 06:16:54 +00:00
mach-c55.c ar71xx: Add support for AirTight Networks C-55 2015-12-23 14:43:35 +00:00
mach-cap324.c ar71xx: Kernel board definition for PowerCloud CAP324 2015-12-19 11:27:19 +00:00
mach-cap4200ag.c ar71xx: add support for the Senao CAP4200AG board 2012-10-27 08:55:38 +00:00
mach-carambola2.c ar71xx: update Carambola2 platform data 2014-08-04 14:46:52 +00:00
mach-cf-e316n-v2.c target: ar71xx: add support for COMFAST CF-E316N v2 board 2015-09-11 16:31:35 +00:00
mach-cpe510.c ar71xx: add support for TP-LINK CPE210/220/510/520 2014-11-26 08:59:32 +00:00
mach-cr3000.c ar71xx: Kernel board definition for PowerCloud CR3000 2015-12-19 11:27:25 +00:00
mach-cr5000.c ar71xx: Kernel board definition for PowerCloud CR5000 2015-12-19 11:27:32 +00:00
mach-dgl-5500-a1.c add D-link DGL-5500 A1 support 2014-11-27 14:27:34 +00:00
mach-dhp-1565-a1.c ar71xx: Added support for D-link DHP-1565 rev. A1 2014-11-19 09:20:47 +00:00
mach-dir-505-a1.c ar71xx: dir-505: fix reset button gpio active_low value 2015-02-09 12:17:00 +00:00
mach-dir-600-a1.c ar71xx: add support for dlink dir-615-e1 2014-06-02 14:43:35 +00:00
mach-dir-615-c1.c ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address 2015-01-28 19:19:47 +00:00
mach-dir-615-i1.c ar71xx: add support for D-Link DIR-615 rev. Ix board 2015-07-07 13:48:39 +00:00
mach-dir-825-b1.c ar71xx: dir-825-b1: use ath79_parse_ascii_mac helper 2013-09-20 16:41:32 +00:00
mach-dir-825-c1.c ar71xx: fix WLAN 5 GHz LED init on dir-825-c1 2013-10-20 15:59:04 +00:00
mach-dlan-hotspot.c ar71xx: add support for the devolo dLAN Hotspot 2015-11-21 21:24:18 +00:00
mach-dlan-pro-500-wp.c ar71xx: add support for the devolo dLAN pro 500 Wireless+ 2015-07-14 07:32:33 +00:00
mach-dlan-pro-1200-ac.c ar71xx: fix AR8337 switch initialization on dLAN pro 1200+ WiFi ac 2016-01-19 10:16:11 +00:00
mach-dr344.c ar71xx: Add support for Wallys DR344 2015-12-11 15:04:47 +00:00
mach-dragino2.c ar71xx: Fix LED definitions for the DRAGINO2 board 2014-10-14 10:33:07 +00:00
mach-eap300v2.c ar71xx: add kernel support for the EnGenius EAP300 v2 board 2014-07-14 21:30:26 +00:00
mach-eap7660d.c ar71xx: add ALL0305 board alias 2012-08-22 12:33:22 +00:00
mach-el-m150.c ar71xx: Fix the sys LEDs on the EasyLink M150 and mini 2014-11-14 16:58:29 +00:00
mach-el-mini.c ar71xx: Fix the sys LEDs on the EasyLink M150 and mini 2014-11-14 16:58:29 +00:00
mach-epg5000.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-esr900.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-esr1750.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-ew-dorin.c ar71xx: add status led found on ew-dorin boards 2015-05-10 07:47:04 +00:00
mach-f9k1115v2.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-gl-ar150.c ar71xx: add GL-AR150 support V3 2015-11-24 18:29:59 +00:00
mach-gl-ar300.c ar71xx: add GL-AR300 support V3 2015-11-24 18:30:19 +00:00
mach-gl-domino.c ar71xx: add GL-Domino Pi support V3 2015-11-24 18:30:50 +00:00
mach-gl-inet.c ar71xx: Fix GL.iNet WLAN LED 2014-07-21 19:26:46 +00:00
mach-gs-minibox-v1.c ar71xx: Add Gainstrong MiniBox v1.0 support to trunk 2015-10-19 17:55:25 +00:00
mach-gs-oolite.c ar71xx: oolite: the buttons are not active_low 2014-08-01 11:19:34 +00:00
mach-hiwifi-hc6361.c ar71xx: add kernel support for HiWiFi HC6361. 2014-06-02 14:56:24 +00:00
mach-hornet-ub.c Fix (invert/revert) Hornet-UB WPS LED state 2015-03-15 19:25:48 +00:00
mach-ja76pf.c ar71xx: add support for the jjPlus JA76PF2 board 2012-03-16 18:00:34 +00:00
mach-jwap003.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-mc-mac1200r.c ar71xx: Add support for MERCURY MAC1200R 2015-02-09 12:16:51 +00:00
mach-mr12.c ar71xx: Add support for the Meraki MR12 & MR16 2015-05-23 15:27:22 +00:00
mach-mr16.c ar71xx: Add support for the Meraki MR12 & MR16 2015-05-23 15:27:22 +00:00
mach-mr18.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-mr600.c ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board 2014-08-18 13:09:14 +00:00
mach-mr900.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-mr1750.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-mynet-n600.c ar71xx: my net n600: simplify LNA GPIO setup 2014-01-10 09:37:58 +00:00
mach-mynet-n750.c ar71xx: mynet-n750: define LEDs connected to the AR8327 switch 2014-01-21 17:17:42 +00:00
mach-mynet-rext.c ar71xx: fix 100/10mbps ethernet link issues on mynet range extender 2015-06-14 17:41:01 +00:00
mach-mzk-w04nu.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-mzk-w300nh.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-nbg460n.c ar71xx: remove __dev{init,exit} annotations from kernel files 2013-02-19 20:52:06 +00:00
mach-nbg6716.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-om2p.c ar71xx: fix reset button gpio for OM2P/OM2P-HS 2014-10-06 04:51:51 +00:00
mach-om5p.c ar71xx: Increase RXD/RDV to 2 on OM5P-AN 2015-04-20 15:01:00 +00:00
mach-omy-x1.c ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
mach-onion-omega.c ar71xx: add support for Onion Omega 2015-07-24 09:09:49 +00:00
mach-pb42.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-pb92.c ar71xx: remove the built-in MTD map of the PB92 board 2012-03-27 19:38:05 +00:00
mach-qihoo-c301.c ar71xx: qihoo: define flash variable as static 2015-02-07 19:59:02 +00:00
mach-r6100.c Netgear R6100 support 2014-11-26 08:28:22 +00:00
mach-rb4xx.c ar71xx: register the micro sd card reader on RB493G 2013-02-10 12:31:38 +00:00
mach-rb91x.c ar71xx: rb91x: fix ethernet packet loss issues 2014-04-13 20:41:52 +00:00
mach-rb95x.c ar71xx: rb95x: use correct SPI flash address 2014-03-12 12:52:39 +00:00
mach-rb750.c ar71xx: Routerboard 751 Mac Address Offset Fix 2013-02-08 09:34:53 +00:00
mach-rb922.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-rb2011.c ar71xx: rb2011: apply patch to file 2015-02-07 21:10:51 +00:00
mach-rbsxtlite.c ar71xx: Add support for MikroTik RouterBOARD SXT Lite 2014-07-01 13:38:30 +00:00
mach-rw2458n.c ar71xx: rw2458n - Use eeprom (art) from wifi card 2013-03-15 14:35:50 +00:00
mach-smart-300.c add support for the NC-LINK SMART-300 2014-08-11 11:44:51 +00:00
mach-tellstick-znet-lite.c ar71xx: add support for the Telldus TellStick ZNet Lite 2016-03-10 19:07:26 +00:00
mach-tew-632brp.c ar71xx: TEW632BRP has buttons 'active low', fix board config 2013-07-28 10:23:22 +00:00
mach-tew-673gru.c ar71xx: tew-673gru: use ath79_parse_ascii_mac helper 2013-09-20 16:41:34 +00:00
mach-tew-712br.c ar71xx: tew-712br: use ath79_parse_ascii_mac helper 2013-09-20 16:41:36 +00:00
mach-tew-732br.c ar71xx: add kernel support for the TEW-732BR board 2013-09-23 09:49:01 +00:00
mach-tew-823dru.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-tl-mr3x20.c ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 2012-11-05 13:23:27 +00:00
mach-tl-mr11u.c ar71xx: improve kernel support for the TL-MR3040 v2 2013-09-25 18:42:10 +00:00
mach-tl-mr13u.c ar71xx: Fix LED polarity for the TP-LINK TL-MR13U. 2015-03-10 13:26:50 +00:00
mach-tl-mr3020.c ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 2013-01-07 14:30:37 +00:00
mach-tl-wa701nd-v2.c ar71xx: add support for TL-WA701ND v2 2015-01-20 15:48:07 +00:00
mach-tl-wa801nd-v3.c ar71xx: Added support for TL-WA801NDv3 2016-02-12 08:30:28 +00:00
mach-tl-wa830re-v2.c ar71xx: added support for TL-WA830RE V2 2014-07-13 07:12:22 +00:00
mach-tl-wa901nd-v2.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-tl-wa901nd.c ar71xx: fix tl-wa901nd buttons code 2013-08-05 09:09:39 +00:00
mach-tl-wa7210n-v2.c ar71xx: TL-WA7210n v2 support 2015-02-24 12:00:50 +00:00
mach-tl-wax50re.c ar71xx: add support for TP-LINK TL-WA860RE v1 2014-07-13 10:03:41 +00:00
mach-tl-wdr3320-v2.c ar71xx: add TP-LINK TL-WDR3320 v2 support 2015-09-14 20:12:16 +00:00
mach-tl-wdr3500.c ar71xx: fix ethernet LEDs on the TL-WDR3500 2013-03-25 06:40:03 +00:00
mach-tl-wdr4300.c ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions 2015-03-15 19:39:47 +00:00
mach-tl-wdr6500-v2.c ar71xx: register only the built-in switch MDIO bus, hook up eth0 to it, should hopefully fix regression reported in #21520 2016-02-07 21:00:11 +00:00
mach-tl-wr703n.c ar71xx: fix typo in tl-wr710n mac setup (fixes #16469) 2014-05-24 08:01:33 +00:00
mach-tl-wr720n-v3.c ar71xx: add support for TL-WR720N-v4. 2015-06-18 18:21:23 +00:00
mach-tl-wr741nd-v4.c ar71xx: add support for WIFI button on tp-link tl-mr3220v2 2013-06-04 13:25:54 +00:00
mach-tl-wr741nd.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-tl-wr841n-v8.c ar71xx: add support for the TP-LINK TL-WR941ND v5 2015-02-04 06:10:20 +00:00
mach-tl-wr841n-v9.c ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531) 2015-07-07 08:05:50 +00:00
mach-tl-wr841n.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-tl-wr941nd-v6.c ar71xx: add support for TP-LINK TL-WR941ND v6 (international version) 2015-11-08 20:39:18 +00:00
mach-tl-wr941nd.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-tl-wr1041n-v2.c generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 2012-12-22 12:12:35 +00:00
mach-tl-wr1043nd-v2.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-tl-wr1043nd.c ar71xx: init switch hw_reset on the TL-WR1043ND board 2012-08-02 09:54:28 +00:00
mach-tl-wr2543n.c ar71xx: fix comment style in mach-tl-wr2543n.c 2012-08-22 12:42:59 +00:00
mach-tube2h.c ar71xx: Ext LNA patch for TUBE2H and HORNET-UB targets 2015-03-12 10:06:53 +00:00
mach-ubnt-unifiac.c ar71xx: Support for Ubiquiti UniFi AP AC LITE 2016-02-12 08:31:32 +00:00
mach-ubnt.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-weio.c ar71xx: Add WeIO Board Support 2015-09-24 09:08:47 +00:00
mach-whr-hp-g300n.c ar71xx: remove the built-in MTD maps of several boards 2012-03-27 19:38:01 +00:00
mach-wlae-ag300n.c ar71xx: Buffalo WLAE-AG300N initial support 2012-08-01 12:24:52 +00:00
mach-wlr8100.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-wndap360.c ar71xx: WNDAP360 adding wifi LED support 2014-06-02 15:02:54 +00:00
mach-wndr3700.c ar71xx: use netgear prefix for WNDR3700 LED names 2013-09-21 15:55:50 +00:00
mach-wndr4300.c ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machines 2014-07-21 18:41:52 +00:00
mach-wnr2000-v3.c ar71xx: WNR612v2: enable control of all LEDs and buttons 2016-03-05 09:45:15 +00:00
mach-wnr2000-v4.c ar71xx: do general formatting on wnr2000-v4 2015-05-08 12:24:30 +00:00
mach-wnr2000.c ar71xx: use netgear prefix for WNR2000 LED names 2013-09-21 15:55:51 +00:00
mach-wnr2200.c ar71xx: on wnr2200, revert the mac0/mac1, the ethernet interfaces are swapped. use MAC1 for wlan 2015-12-11 21:12:04 +00:00
mach-wp543.c ar71xx: wp543: set active_low flag for the buttons 2014-01-26 14:55:32 +00:00
mach-wpe72.c ar71xx: compex wpe72 add space to include statement 2015-07-09 07:04:14 +00:00
mach-wpj344.c ar71xx: fix leds and gpio on wpj344 2015-04-29 20:04:46 +00:00
mach-wpj531.c ar71xx: compex wpj531 register usb support 2015-07-09 07:03:54 +00:00
mach-wpj558.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-wrt160nl.c ar71xx: rename wrt160nl's trx partition parser 2015-03-11 15:56:15 +00:00
mach-wrt400n.c ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
mach-wzr-450hp2.c ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
mach-wzr-hp-ag300h.c ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp 2013-07-14 14:05:27 +00:00
mach-wzr-hp-g300nh.c ar71xx: use uimage split for WZR-HP-G300NH 2013-07-14 14:05:23 +00:00
mach-wzr-hp-g300nh2.c ar71xx: use uimage split for WZR-HP-G300NH2 2013-07-14 14:05:31 +00:00
mach-wzr-hp-g450h.c ath9k: merge initval and tx gain table updates, calibration fixes 2013-12-08 14:48:30 +00:00
mach-zcn-1523h.c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 2012-11-04 22:08:54 +00:00
machtypes.h ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
Makefile ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
nvram.c ar71xx: allow ath79_nvram_parse_mac_addr parsing mac with quotes 2014-07-13 19:43:54 +00:00
nvram.h ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
pci-ath9k-fixup.c ar71xx: allow pci calibration fixup to work with ar9344 2015-07-07 13:46:44 +00:00
pci-ath9k-fixup.h ar71xx: merge files-3.2 to files 2012-02-10 08:19:31 +00:00
routerboot.c ar71xx: routerboot: export extended wlan data via sysfs 2015-04-07 20:03:43 +00:00
routerboot.h ar71xx: routerboot: add support for extended radio data 2015-04-07 20:03:35 +00:00