openwrtv4/target/linux/ramips/image
Pawel Dembicki 20b09a2125 ramips: add support for Lava LR-25G001
The Lava LR-25G001 Wireless Router is based on the MT7620A SoC.

Specification:

- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7610EN)
- 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN)
- 2x external, detachable antennas
- 1x USB 2.0
- UART (J3) header on PCB (57600 8n1)
- 8x LED (3x GPIO-controlled), 2x button
- JBOOT bootloader

Known issues:
- Work only three Gigabit ports (3/5, 1 WAN and 2LAN)

Installation:
Apply factory image via http web-gui or JBOOT recovery page

How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
  blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-11-26 12:16:52 +01:00
..
lzma-loader ramips: Add support for mt7621 to lzma-loader 2018-06-21 06:54:42 +02:00
Makefile ramips: only limit lzma dictionary size on mt7621 2018-08-30 10:57:35 +02:00
mt76x8.mk ramips: add support for Skylab SKW92A in EVB 2018-11-26 09:47:27 +01:00
mt7620.mk ramips: add support for Lava LR-25G001 2018-11-26 12:16:52 +01:00
mt7621.mk treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
rt288x.mk ramips: use patch-dtb for F5D8235 V1 2018-04-23 22:07:22 +02:00
rt305x-legacy.mk ramips: use new image build code for WHR-G300N 2018-02-13 10:01:53 +01:00
rt305x.mk ramips: fix ethernet for f5d8235-v2 board 2018-11-26 09:58:17 +01:00
rt3883.mk ramips: add support for Loewe WMDR-143N 2017-07-27 09:13:27 +02:00