openwrtv4/target/linux/ramips
Pawel Dembicki 20b09a2125 ramips: add support for Lava LR-25G001
The Lava LR-25G001 Wireless Router is based on the MT7620A SoC.

Specification:

- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7610EN)
- 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN)
- 2x external, detachable antennas
- 1x USB 2.0
- UART (J3) header on PCB (57600 8n1)
- 8x LED (3x GPIO-controlled), 2x button
- JBOOT bootloader

Known issues:
- Work only three Gigabit ports (3/5, 1 WAN and 2LAN)

Installation:
Apply factory image via http web-gui or JBOOT recovery page

How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
  blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-11-26 12:16:52 +01:00
..
base-files ramips: add support for Lava LR-25G001 2018-11-26 12:16:52 +01:00
dts ramips: add support for Lava LR-25G001 2018-11-26 12:16:52 +01:00
files-4.14/drivers ramips: mt7620: add force use of mdio-mode 2018-11-26 12:16:52 +01:00
image ramips: add support for Lava LR-25G001 2018-11-26 12:16:52 +01:00
mt76x8 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
mt7620 ramips: add support for Lava LR-25G001 2018-11-26 12:16:52 +01:00
mt7621 ramips: refresh mt7621 kernel config 2018-10-15 12:54:12 +02:00
patches-4.14 ramips: fix cpu clock of mt7621 and add dt clk devices 2018-11-26 12:13:52 +01:00
rt288x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
rt305x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
rt3883 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk ramips: rename pwm kernel module 2018-04-08 12:35:33 +02:00