openwrtv4/target/linux
John Crispin 1aab21df9f ramips: Allow to receive vlan over untag ports on MT7530
The MT7530 switch driver with enable_vlan set will automatically set all
ports to the user port mode. The hardware will remove the incoming vlan tag
on these ports and use it for its internal vlan. This is usually not wanted
and makes it impossible to communicate via vlan over the switch in both
directions.

It is possible to configure a switch port to "transparent mode" when this
port is only used as untag in the switch VLANs. This will disable the VLAN
untagging of packets when they were received on this port. The tagging on
"tag" ports based on the vlan id is still working.

The transparent port mode cannot be used when a port is both used in a VLAN
as "tag" and in another one as "untag" port.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47114
2015-10-05 10:26:09 +00:00
..
adm5120 adm5120: disable the openwrt commandline hack 2015-08-30 12:17:54 +00:00
adm8668 build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
ar7 kernel: update 4.1 to 4.1.10 2015-10-04 11:34:39 +00:00
ar71xx ar71xx: Correct WeIO board name 2015-10-05 10:25:40 +00:00
arm64 kernel: update 4.1 to 4.1.10 2015-10-04 11:34:39 +00:00
at91 at91: fix usb rate backport patch tab mangle 2015-08-17 16:10:49 +00:00
ath25 ath25: disable the openwrt commandline hack 2015-08-30 12:17:56 +00:00
au1000 image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
bcm53xx kernel: update 4.1 to 4.1.10 2015-10-04 11:34:39 +00:00
brcm47xx brcm47xx: describe 300-fork_cacheflush.patch & 310-no_highpage.patch 2015-09-27 06:53:12 +00:00
brcm63xx kernel: update 3.18 to 3.18.21 2015-09-02 10:18:15 +00:00
brcm2708 kernel: update 4.1 to 4.1.10 2015-10-04 11:34:39 +00:00
cns3xxx kernel: update 3.18 to 3.18.21 2015-09-02 10:18:15 +00:00
gemini kernel: refresh patches for 4.1 2015-07-22 12:51:11 +00:00
generic kernel: update 4.1 to 4.1.10 2015-10-04 11:34:39 +00:00
imx6 imx6: disable ext2/ext3 filesystem support (ext4 is enough) 2015-09-24 08:37:35 +00:00
ipq806x kernel: update 4.1 to 4.1.10 2015-10-04 11:34:39 +00:00
ixp4xx kernel: update 4.1 to 4.1.5 2015-08-14 13:06:33 +00:00
kirkwood kirkwood: add wpad-mini to router profiles 2015-08-05 13:56:02 +00:00
lantiq lantiq: fix binutils 2.15.1 build 2015-10-04 22:03:04 +00:00
malta malta: disable the openwrt commandline hack 2015-08-30 12:18:05 +00:00
mcs814x mcs814x: use firmware partition splitter on dLAN USB Extender 2015-08-17 06:16:19 +00:00
mpc85xx target/mpc85xx: check if 'generic' subtarget for image file cuImage.tl-wdr4900-v1 2015-10-05 10:25:28 +00:00
mvebu This had been set in r44508 as a workaround for switch problems. 2015-08-21 08:10:48 +00:00
mxs mxs: fixup permissions of image generation scripts 2015-09-23 18:40:42 +00:00
netlogic netlogic: copy initramfs image to $(BIN_DIR) 2015-04-23 22:31:36 +00:00
octeon octeon: fix imagebuilder 2015-05-29 11:28:20 +00:00
omap omap: add Kernel 4.1 2015-09-21 17:40:52 +00:00
omap24xx omap24xx: remove obsolete kernel 3.3 patches 2015-09-16 07:56:33 +00:00
orion kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4 2015-09-08 12:31:04 +00:00
oxnas kernel: update 4.1 to 4.1.10 2015-10-04 11:34:39 +00:00
ppc40x ppc40x: upgrade to 3.18 2015-04-12 20:48:13 +00:00
ppc44x image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
pxa kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED 2015-03-06 07:56:34 +00:00
ramips ramips: Allow to receive vlan over untag ports on MT7530 2015-10-05 10:26:09 +00:00
rb532 kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
realview realview: create sd card image for qemu 2015-09-14 20:10:04 +00:00
sunxi kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4 2015-09-08 12:31:04 +00:00
uml uml: backport another upstream patch to fix compile errors 2015-09-28 12:22:35 +00:00
x86 x86/geode: enable DMI and Geos support (fixes #20512) 2015-09-17 10:15:52 +00:00
xburst image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
Makefile