KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ramips: Allow to receive vlan over untag ports on MT7530

Browse source 
The MT7530 switch driver with enable_vlan set will automatically set all
ports to the user port mode. The hardware will remove the incoming vlan tag
on these ports and use it for its internal vlan. This is usually not wanted
and makes it impossible to communicate via vlan over the switch in both
directions.

It is possible to configure a switch port to "transparent mode" when this
port is only used as untag in the switch VLANs. This will disable the VLAN
untagging of packets when they were received on this port. The tagging on
"tag" ports based on the vlan id is still working.

The transparent port mode cannot be used when a port is both used in a VLAN
as "tag" and in another one as "untag" port.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47114
This commit is contained in:
John Crispin 2015-10-05 10:26:09 +00:00
parent dd8f5abb23
commit 1aab21df9f
1 changed files with 33 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

36
target/linux/ramips/files/drivers/net/ethernet/ralink/mt7530.c
View file

@ -484,6 +484,8 @@ mt7530_apply_config(struct switch_dev *dev)
{
struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
int i, j;
u8 tag_ports;
u8 untag_ports;
if (!priv->global_vlan_enable) {
for (i = 0; i < MT7530_NUM_PORTS; i++)
@ -499,9 +501,37 @@ mt7530_apply_config(struct switch_dev *dev)
for (i = 0; i < MT7530_NUM_PORTS; i++)
mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0003);
/* set all ports as user port */
for (i = 0; i < MT7530_NUM_PORTS; i++)
mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x81000000);
/* check if a port is used in tag/untag vlan egress mode */
tag_ports = 0;
untag_ports = 0;
for (i = 0; i < MT7530_NUM_VLANS; i++) {
u8 member = priv->vlan_entries[i].member;
u8 etags = priv->vlan_entries[i].etags;
if (!member)
continue;
for (j = 0; j < MT7530_NUM_PORTS; j++) {
if (!(member & BIT(j)))
continue;
if (etags & BIT(j))
tag_ports |= 1u << j;
else
untag_ports |= 1u << j;
}
}
/* set all untag-only ports as transparent and the rest as user port */
for (i = 0; i < MT7530_NUM_PORTS; i++) {
u32 pvc_mode = 0x81000000;
if (untag_ports & BIT(i) && !(tag_ports & BIT(i)))
pvc_mode = 0x810000c0;
mt7530_w32(priv, REG_ESW_PORT_PVC(i), pvc_mode);
}
for (i = 0; i < MT7530_NUM_VLANS; i++) {
u16 vid = priv->vlan_entries[i].vid;