openwrtv4/target/linux/ar71xx/image
Federico Cappon 9fec39a033 ar71xx: add support for TP-Link TL-WA855RE v1
TP-Link TL-WA855RE v1 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.

Short specification:

- 550/397/198 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 32 MB of RAM (DDR1)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 2x external antennas
- 2x LED (green and orange in the same package), 2x button
- UART: TP5(TX) and TP4(RX) test points on PCB

Flash instruction: use "factory" image directly in vendor GUI.

Warning: this device does not include any kind of recovery mechanism
in the bootloader and disassembling process is not trivial.

You can access vendor firmware over serial line using:
- login: root
- password: sohoadmin

Image was tested only in EU version of the device, but should work
also with the same device version sold in other countries.

Signed-off-by: Federico Cappon <dududede371@gmail.com>
2017-06-29 10:37:36 +02:00
..
lzma-loader ar71xx/lzma-loader: fix O32 ABI conformance 2016-01-17 15:29:03 +00:00
generic.mk ar71xx: move Arduino Yun to generic building code 2017-06-29 10:37:36 +02:00
legacy-devices.mk ar71xx: move Arduino Yun to generic building code 2017-06-29 10:37:36 +02:00
legacy.mk ar71xx: move Arduino Yun to generic building code 2017-06-29 10:37:36 +02:00
Makefile ar71xx: image: use simply expanded variables 2017-06-11 21:32:17 +02:00
mikrotik.mk ar71xx: image: mikrotik: shorten DEVICE_TITLE 2017-06-11 21:32:17 +02:00
nand.mk ar71xx: image: use simply expanded variables 2017-06-11 21:32:17 +02:00
senao.mk ar71xx: fix EnGenius ENS202EXT mtd definition 2017-06-29 10:37:36 +02:00
tp-link.mk ar71xx: add support for TP-Link TL-WA855RE v1 2017-06-29 10:37:36 +02:00
ubinize-nbg6716.ini ar71xx: nbg6716: Enable procd nand sysupgrage 2014-06-26 11:43:38 +00:00
ubinize-wndr4300.ini ar71xx: remove old jffs2 marker from image generation on nand targets 2014-06-24 18:14:18 +00:00
ubnt.mk ar71xx: image: simplify Ubiquiti devices definitions 2017-06-11 21:32:17 +02:00