KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
34251 commits 3 branches 0 tags 154 MiB
Commit graph

229 commits

Author SHA1 Message Date
Luka Perkov
86f1a60549 kirkwood: drop port-based VLAN setup 
Using port-based VLANs depends on a non-standard
swconfig parameter, which compilcates things like
LuCI that don't know about it. This patch changes
the default to use 802.1q VLANs internally in the
switch, but without tagging packets since we have
two Ethernet ports.

iperf3 tests indicate no difference in performance
versus port-based VLANs when the CPU port is not
using tags.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 44122
 2015-01-25 13:11:02 +00:00
Luka Perkov
34f6c6fc38 kirkwood: enable switch on Linksys EA3500 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 44036
 2015-01-18 16:45:01 +00:00
John Crispin
8698398a6e target: kirkwood: fix leds defaults config 
Fix missing parameters in 01_leds

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 44007
 2015-01-17 14:39:01 +00:00
Luka Perkov
a1872182bb mvsw6171: rename to 'mvsw61xx' 
In preparation for properly supporting switches
beyond the 88E6171.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43935
 2015-01-11 17:19:58 +00:00
Imre Kaloz
5744500ab6 we've changed places with Luka, reflect that :) 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43774
 2014-12-25 22:34:15 +00:00
Luka Perkov
873202fc0b kirkwood: add *plugs to uci-defaults 
Set defaults health led to a timer heartbeet (200/800)
and populate network for:

- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43752
 2014-12-19 11:05:13 +00:00
Luka Perkov
39743e45f8 kikwood: populate kirkwood.sh with new boards 
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43751
 2014-12-18 18:38:43 +00:00
Luka Perkov
ec9a0f898a kirkwood: set default EA4500 switch config 
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43750
 2014-12-18 18:38:38 +00:00
Luka Perkov
309e74b86d kirkwood: add sheevaplug and derivatives 
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2

Signed-off-by: Gérald Kerma <drEagle@doukki.net>

SVN-Revision: 43735
 2014-12-17 08:33:55 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument 
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
 2014-12-15 10:37:00 +00:00
John Crispin
2db6da5532 kirkwood: enable EA4500 switch on 3.18 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43704
 2014-12-14 08:57:58 +00:00
John Crispin
d7b4bf8966 kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file 
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43670
 2014-12-12 17:14:14 +00:00
Luka Perkov
a2a6077fd0 kirkwood: sort 110-nas profile 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43642
 2014-12-11 23:29:04 +00:00
Luka Perkov
9a74026206 kirkwood: add 3.18 support 
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43613
 2014-12-11 01:20:41 +00:00
Luka Perkov
3b17625394 kirkwood: Iomega ix2-200: use all remaining MTD space for rootfs 
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43590
 2014-12-09 23:29:49 +00:00
John Crispin
7a65768ddc kirkwood: add a diag script 
Currently only Linksys EA4500 is supported.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 43543
 2014-12-07 16:53:37 +00:00
John Crispin
b5675ad92a kirkwood: enable mvsw6171 switch driver on EA4500 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43487
 2014-12-01 21:30:40 +00:00
Luka Perkov
7974f29558 kirkwood: change CRC32 implementation to CRC32_SLICEBY8 
At least on my Iomega ix2-200 system, this makes btrfs writes about 30% faster.

Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43434
 2014-11-30 01:20:38 +00:00
Luka Perkov
5c4f9198bb kirkwood: refresh kernel config 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43432
 2014-11-30 01:14:14 +00:00
John Crispin
8dfb87bebc kirkwood: Add support for Iomega StorCenter ix2-200 
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43391
 2014-11-26 09:00:48 +00:00
Luka Perkov
4f1a9470f0 kirkwood: add support for Linksys EA3500 
http://wiki.openwrt.org/toh/linksys/ea3500

Signed-off-by: Dan Walters <dan@walters.io>

SVN-Revision: 43230
 2014-11-10 23:55:10 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER 
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
 2014-10-24 19:34:02 +00:00
Felix Fietkau
275cef6363 image.mk: clean up and parallelize mkfs calls 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42878
 2014-10-12 15:00:49 +00:00
Felix Fietkau
f35da063bc targets: remove useless quotes around KERNELNAME 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
 2014-10-05 20:17:19 +00:00
Luka Perkov
02629d8f87 kernel: update 3.14 to 3.14.18 
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
 2014-09-10 21:40:19 +00:00
Florian Fainelli
a5a309142c kirkwood: fix typos on DEBUG_LL_UART_* 
We were prompted for which DEBUG_LL_UART implementation we want, fix the
typos such that the build continues.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42332
 2014-08-30 00:32:05 +00:00
Luka Perkov
0d165a244d kirkwood: refresh kernel config 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42314
 2014-08-27 17:14:09 +00:00
Luka Perkov
7116b091eb kirkwood: drop 3.10 support 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42077
 2014-08-08 13:55:30 +00:00
Luka Perkov
f767d83b67 kirkwood: switch to 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42076
 2014-08-08 13:55:29 +00:00
John Crispin
7d8f187201 target/linux/*/image/Makefile: use new dts path variable 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
 2014-07-21 18:42:06 +00:00
John Crispin
ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org> 
SVN-Revision: 41776
 2014-07-20 17:31:11 +00:00
Gabor Juhos
d0ad8c00b6 kernel: sort Kconfig options in kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41614
 2014-07-13 16:25:54 +00:00
John Crispin
994e5ce2f9 kernel: update 3.10.36->3.10.44 
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
 2014-06-26 13:47:42 +00:00
Luka Perkov
a54f4320f9 kirkwood: move kirkwood.sh to /lib/ for consistency 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41338
 2014-06-26 10:13:47 +00:00
Luka Perkov
8416523dba kirkwood: base-files: use /lib/functions/kirkwood.sh 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41336
 2014-06-24 18:18:53 +00:00
Luka Perkov
e6aea925d3 kirkwood: base-files: add script to detect board name and populate /tmp/sysinfo 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41335
 2014-06-24 18:18:51 +00:00
Luka Perkov
70a27a518e kernel: update 3.14 to 3.14.8 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41309
 2014-06-24 12:27:36 +00:00
John Crispin
e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
 2014-06-11 13:00:17 +00:00
John Crispin
ac5d5cbc79 kernel: add a NAND_SUPPORT symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41122
 2014-06-11 12:59:22 +00:00
Luka Perkov
dfabb76883 kirkwood: cosmetic: move POGOE02 profile to different file 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40873
 2014-05-28 21:43:43 +00:00
Luka Perkov
4122af10f9 kirkwood: add support for Linksys EA4500 
Support is added only for kernel 3.14 - do not show it until
the switch is made.

Following uboot env changes are needed to make it work on stock uboot:
 2014-05-28 21:43:39 +00:00
Luka Perkov
3bb20dedcd kirkwood: add Pogoplug E02 kernel support for 3.14 
This also fixes a typo in the UBIFS_OPTS

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 40827
 2014-05-23 08:16:56 +00:00
Luka Perkov
55131c5f42 kirkwood: add support for 3.14 
* support for pogoplug_e02 is missing

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40808
 2014-05-21 12:04:09 +00:00
Gabor Juhos
d2812cb036 kernel: update 3.10 to 3.10.36 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
 2014-04-12 11:59:07 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
 2014-03-27 09:28:33 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
 2014-02-23 10:59:40 +00:00
Luka Perkov
30c39f99a7 kirkwood: dockstar: remove sata from packages 
The dockstar doesn't have any sata ports.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39596
 2014-02-16 00:14:29 +00:00
Luka Perkov
9ba7cbafe4 kirkwood: add support for Seagate GoFlexNet 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39595
 2014-02-16 00:14:27 +00:00
Luka Perkov
58fa3f8fdf kirkwood: update support for dockstar 
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39593
 2014-02-15 23:53:10 +00:00
Luka Perkov
0b0357b50e kirkwood: update support for ib62x0 
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39592
 2014-02-15 23:53:09 +00:00
Luka Perkov
0c25f159fd kirkwood: update support for iconnect 
Previous patch was pushed due to false user report. While at it fix alphabetic
ordering.

The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0x1fe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39591
 2014-02-15 23:53:08 +00:00
Gabor Juhos
a2543d72d8 kernel: update 3.10 to 3.10.28 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
 2014-01-26 11:30:34 +00:00
Gabor Juhos
0e2586a774 kernel: update 3.10 to 3.10.26 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
 2014-01-11 16:06:37 +00:00
Hauke Mehrtens
952db22551 kernel: update kernel 3.10 to 3.10.24 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
 2013-12-15 19:16:30 +00:00
Gabor Juhos
f1ef0b92be kernel: update 3.10 to 3.10.21 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
 2013-12-01 09:59:53 +00:00
Luka Perkov
6cbad59ead kirkwood: include ext4 support by default 
Several users reported that they would like this feature.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38901
 2013-11-24 23:07:34 +00:00
Luka Perkov
a48520f0f3 kirkwood: kernel: add missing config option 
Buildbot found missing config option for target kirkwood.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>

SVN-Revision: 38900
 2013-11-24 17:53:34 +00:00
Luka Perkov
770a285ee3 kirkwood: drop unnecessary argument from *_UBIFS_OPTS variables 
The '-U' aka '--squash-uids' is already used in Image/mkfs/ubifs function.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38898
 2013-11-23 15:55:12 +00:00
Luka Perkov
746ace4baf kirkwood: add support for iomega iconnect 
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Engberg <daniel.engberg@pyret.net>

SVN-Revision: 38897
 2013-11-23 15:55:10 +00:00
Hauke Mehrtens
6d4132b7a4 kirkwood: add missing kernel config CONFIG_REGMAP=y 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 38837
 2013-11-17 16:05:09 +00:00
Luka Perkov
b294319215 kirkwood: add support for dockstar 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38664
 2013-11-06 19:24:32 +00:00
Gabor Juhos
35656042f1 kernel: update 3.10 to 3.10.18 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
 2013-11-05 08:25:45 +00:00
Luka Perkov
e00bc81a56 kirkwood: add userland support for Pogoplug E02 
This patch adds the userland support for the Pogoplug E02 by Cloud
Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38631
 2013-10-31 12:04:04 +00:00
Luka Perkov
2b0fa00da8 kirkwood: add Pogoplug E02 Kernel support 
This patch adds a DTS file for the Pogoplug E02 by Cloud Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38630
 2013-10-31 12:04:02 +00:00
Luka Perkov
6f26ef8b5d kirkwood: extend image/Makefile 
* use lower case letters in generated images
* extend support for boot/ directory
* fix some typos

Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38629
 2013-10-31 11:44:28 +00:00
Luka Perkov
7938d16451 build: make MkuImage more generic 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38516
 2013-10-23 22:16:09 +00:00
Gabor Juhos
b6b06000eb kernel: update 3.10 to 3.10.17 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
 2013-10-23 12:51:05 +00:00
Luka Perkov
ad7564142d kirkwood: drop 3.3.x kernel version 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38404
 2013-10-14 19:46:45 +00:00
Luka Perkov
73246d2f64 kirkwood: upgrade to 3.10.15 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38402
 2013-10-14 19:46:40 +00:00
Luka Perkov
8c2f571ddd kirkwood: enable appended dtb (3.10.x) 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38379
 2013-10-13 03:35:13 +00:00
Luka Perkov
c808a4a7ef ubifs: enable building modular images 
Now it is possible to build ubi/ubifs images for only selected boards inside
single target.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38375
 2013-10-12 21:44:48 +00:00
Luka Perkov
fa3ab0c237 kirkwood: add support for UBI (3.10.x) 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38301
 2013-10-04 03:45:52 +00:00
Luka Perkov
5617993e10 kirkwood: enable dts compilation 
In 3.10 we might build those, so for now just add this functionality.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38297
 2013-10-03 02:50:03 +00:00
Luka Perkov
a30df8987d kirkwood: fix initramfs images 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38296
 2013-10-03 02:50:02 +00:00
Luka Perkov
38936426f7 kirkwood: update patches and configuration (3.10) 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38295
 2013-10-03 02:50:00 +00:00
Luka Perkov
0eb732c659 kirkwood: drop PROFILE from image names 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38281
 2013-10-02 00:33:48 +00:00
Luka Perkov
0331657a4f kirkwood: add linux 3.10 support 
Backport appropriate patches to allow using device tree only board
defintions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38280
 2013-10-02 00:33:47 +00:00
Luka Perkov
7d1e5ae918 kirkwood: prepare for 3.10 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38279
 2013-10-02 00:33:45 +00:00
Luka Perkov
914ca3cb55 kirkwood: explicitly set CPU_TYPE to xscale 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38278
 2013-10-02 00:33:43 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images 
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
 2013-06-27 19:58:31 +00:00
Felix Fietkau
d3a7b5633c kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36937
 2013-06-15 11:50:50 +00:00
Jonas Gorski
e7b504ce8e kirkwood: convert to use the new jffs2_nand 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36861
 2013-06-05 20:58:53 +00:00
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6 
SVN-Revision: 36278
 2013-04-09 08:03:08 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution 
SVN-Revision: 35217
 2013-01-18 12:42:53 +00:00
Florian Fainelli
1e103b2ecc target: enable XZ BCJ decompressor code after r35097 
Required to actually be able to mount squashfs xz compressed
filesystems.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35156
 2013-01-14 16:34:25 +00:00
Florian Fainelli
33f6c5ddb9 kernel: add missing USB configuration symbols after r34501 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34568
 2012-12-07 11:01:53 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
 2012-10-29 10:11:05 +00:00
John Crispin
de3c3d7181 Enable eSATA sheevaplug 
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.

Signed-off-by: Unai Uribarri <unaiur@gmail.com>

SVN-Revision: 33266
 2012-08-24 06:15:06 +00:00
Luka Perkov
03a6d65c37 kernel: add Marvell SoC built-in RTC to modules 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32732
 2012-07-15 14:25:30 +00:00
Luka Perkov
c89e87d186 kirkwood: add support for seagate goflexnet and goflexhome 
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32725
 2012-07-15 12:18:29 +00:00
Luka Perkov
952ce3473d kirkwood: revert config changes from r32053 
SVN-Revision: 32719
 2012-07-15 00:08:52 +00:00
Luka Perkov
1c80d9f21d kirkwood: fix typo in uci-defaults/leds 
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32343
 2012-06-13 18:41:42 +00:00
Luka Perkov
be5229f0ba kirkwood: ib62x0 fix reboot 
SVN-Revision: 32131
 2012-06-08 23:17:46 +00:00
John Crispin
a4d96aae8d bump to 3.3.8 
SVN-Revision: 32055
 2012-06-05 06:57:51 +00:00
Luka Perkov
605012ad5d kirkwood: reorganize target 
SVN-Revision: 32053
 2012-06-05 00:43:56 +00:00
Gabor Juhos
c81c6516de kirkwood: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31994
 2012-05-29 16:39:20 +00:00
Gabor Juhos
ba3ad24514 kirkwood: use uci-defaults to configure different boards 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31990
 2012-05-29 16:39:15 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00