Commit graph

845 commits

Author SHA1 Message Date
Gabor Juhos
693c777eaf ar71xx: remove LED setup of nonexistent interfaces on RB750
SVN-Revision: 28693
2011-10-31 14:26:56 +00:00
Gabor Juhos
2bcd612e72 ar71xx: remove default network config of the wnr2000 board
It is the same as the generic configuration.

SVN-Revision: 28692
2011-10-31 14:26:51 +00:00
Gabor Juhos
39b3bfcf6a ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28678
2011-10-30 13:06:30 +00:00
Gabor Juhos
1646346798 ar71xx: add initial support for the OpenMesh OM2P board
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
2011-10-27 07:54:51 +00:00
Gabor Juhos
9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
2011-10-24 21:49:26 +00:00
Gabor Juhos
d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
2011-10-24 21:49:21 +00:00
Jo-Philipp Wich
b61de9c865 base-files: make sure inittab-console-fixup returns with success (#10275)
SVN-Revision: 28562
2011-10-24 21:35:43 +00:00
Jonas Gorski
a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G
SVN-Revision: 28423
2011-10-11 23:05:16 +00:00
Gabor Juhos
e45d7d7006 ar71xx: enable login only on the system console by default
SVN-Revision: 28294
2011-09-23 19:56:38 +00:00
Gabor Juhos
733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
2011-09-21 11:47:53 +00:00
Gabor Juhos
85b858fae6 ar71xx: enable sysupgrade on the AP96 and DB120 boards
SVN-Revision: 27901
2011-08-04 19:41:18 +00:00
Gabor Juhos
fb77134596 ar71xx: use the same test for AP121 and Zcomax sysupgrade images
SVN-Revision: 27900
2011-08-04 19:41:17 +00:00
Jonas Gorski
e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
2011-07-28 11:57:51 +00:00
Felix Fietkau
7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650)
SVN-Revision: 27434
2011-07-04 03:03:34 +00:00
Jo-Philipp Wich
701543d3ef revert r27043 (#9513)
SVN-Revision: 27343
2011-07-01 19:52:57 +00:00
Jo-Philipp Wich
1edef5ec98 revert r27341, it introduce wrong behaviour for other models
SVN-Revision: 27342
2011-07-01 19:15:45 +00:00
Jo-Philipp Wich
3b3103b2f1 turn status LED off if device finished initializing
SVN-Revision: 27341
2011-07-01 18:39:53 +00:00
Felix Fietkau
cc56af716c ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607)
SVN-Revision: 27283
2011-06-25 13:54:42 +00:00
Vasilis Tsiligiannis
70106f153d Remove trailing spaces, convert spaces to tabs
SVN-Revision: 27153
2011-06-09 19:30:50 +00:00
Felix Fietkau
9160e06af5 ar71xx: override inittab to enable login on ttyATH0
SVN-Revision: 27128
2011-06-07 17:07:10 +00:00
Gabor Juhos
9e435c03e0 ar71xx: add sysupgrade support for the AP121 boards
SVN-Revision: 27069
2011-05-31 22:53:45 +00:00
Gabor Juhos
646937135f ar71xx: add default network config for the AP121 boards
SVN-Revision: 27068
2011-05-31 22:53:44 +00:00
Gabor Juhos
650c7cc2fd ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
SVN-Revision: 27043
2011-05-31 22:53:13 +00:00
Gabor Juhos
4834fdaccd ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
SVN-Revision: 27042
2011-05-31 22:53:12 +00:00
Gabor Juhos
b39eebdf1e ar71xx: add uci config for the WLAN LED on the WRT160NL
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

SVN-Revision: 26861
2011-05-08 21:38:49 +00:00
Gabor Juhos
858e2e719b ar71xx: use phy0tpt trigger for the WLAN LEDs
SVN-Revision: 26860
2011-05-08 21:38:48 +00:00
Felix Fietkau
cbc75a9c70 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
SVN-Revision: 26779
2011-04-28 21:27:42 +00:00
Alexandros C. Couloumbis
f13581eedb linux/ar71xx: update wget2nand script
SVN-Revision: 26747
2011-04-21 12:38:25 +00:00
Gabor Juhos
e193547733 ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
SVN-Revision: 26603
2011-04-12 09:29:21 +00:00
Gabor Juhos
54ede24829 ar71xx: Add support for WZR-HP-G301NH
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26601
2011-04-12 09:29:10 +00:00
Felix Fietkau
784d808d07 ar71xx: add default configuration for the switch on AP96
Enables forwarding of frames between the switch ports (eth0).
Patch by Jouni Malinen

SVN-Revision: 26180
2011-03-15 19:51:42 +00:00
Gabor Juhos
8eb616de82 ar71xx: add support for the TP-Link TL-WA901ND v2 board
Patch-by: Jonathan Benett <jbscience87@gmail.com>

SVN-Revision: 26119
2011-03-13 15:08:31 +00:00
Gabor Juhos
67c3e0bf7e ar71xx: add support for the WNDR3700v2 board
Based on a patch by Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25118
2011-01-26 20:35:42 +00:00
Gabor Juhos
061228d73c ar71xx: make uci-default scripts executable
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>

SVN-Revision: 24897
2011-01-04 13:44:01 +00:00
Claudio Mignanti
2c0596cd69 unifi: add sysupgrade and leds support
SVN-Revision: 24737
2010-12-20 17:28:34 +00:00
Gabor Juhos
e7ea6387a3 ar71xx: use usbdev trigger for USB LEDs by default
SVN-Revision: 24648
2010-12-17 17:10:16 +00:00
Gabor Juhos
a26c3e60e2 ar71xx: populate LED configuration for WZR-HP-G300NH
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

SVN-Revision: 24642
2010-12-17 17:09:57 +00:00
Gabor Juhos
a2a5598c00 ar71xx: add wlan led for the TL-WR941ND
SVN-Revision: 24612
2010-12-15 19:55:50 +00:00
Gabor Juhos
9f38f9bf76 ar71xx: add missing files for the JA76PF board
SVN-Revision: 24444
2010-12-10 19:55:28 +00:00
Gabor Juhos
b680f088ba ar71xx: add support for the jjPlus JA79PF
Patch-by: Cezary Jackiewicz

SVN-Revision: 24440
2010-12-10 17:57:51 +00:00
Gabor Juhos
5b0c83edd9 ar71xx: add support for the TP-LINK TL-MR3220 v1 board
SVN-Revision: 24439
2010-12-10 17:57:48 +00:00
Gabor Juhos
83834da33b ar71xx: add default network configuration file for the TL-MR3420
SVN-Revision: 24437
2010-12-10 17:57:40 +00:00
Gabor Juhos
081796fe47 ar71xx: add nbg460n image generation
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 24419
2010-12-10 15:17:03 +00:00
Jo-Philipp Wich
6f7e2d4ce8 tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
SVN-Revision: 24215
2010-12-02 20:19:55 +00:00
Felix Fietkau
5f3f1b8cd8 ar71xx: Configure WNDR3700 switch LED colors properly (#8103)
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23879
2010-11-04 18:55:16 +00:00
Felix Fietkau
b3b2227869 Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on submitter's request
SVN-Revision: 23878
2010-11-04 18:53:18 +00:00
Felix Fietkau
77eee74d56 ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23877
2010-11-04 18:48:22 +00:00
Felix Fietkau
fc035b3cb6 ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
SVN-Revision: 23439
2010-10-14 13:41:42 +00:00
Felix Fietkau
3941621dbc ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)
SVN-Revision: 23432
2010-10-14 00:14:59 +00:00
Gabor Juhos
697f5d0bdd ar71xx: initial support for jjPlus JWAP003
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

SVN-Revision: 23165
2010-10-01 07:09:29 +00:00
Gabor Juhos
32d12d5e5c ar71xx: add support for the TL-MR3420 v1 board
SVN-Revision: 23136
2010-09-27 14:53:59 +00:00
Felix Fietkau
a7bb7dd99e Add support for Atheros AP96 reference board
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23125
2010-09-27 08:59:53 +00:00
Gabor Juhos
b4336a8e2d ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
SVN-Revision: 22882
2010-09-03 18:14:37 +00:00
Felix Fietkau
523fcf0497 ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563
SVN-Revision: 22675
2010-08-16 19:21:57 +00:00
Gabor Juhos
e35f7ef51d ar71xx: add eap7660d board to diag.sh and sysupgrade
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22644
2010-08-14 21:07:31 +00:00
Alexandros C. Couloumbis
9aef272f4a linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)
SVN-Revision: 22631
2010-08-14 07:48:05 +00:00
Jo-Philipp Wich
6616951c15 add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch
SVN-Revision: 22625
2010-08-13 19:29:51 +00:00
Felix Fietkau
4ee3ae96c2 ar71xx: fix sysupgrade on the ubnt nanostation m
SVN-Revision: 22370
2010-07-23 18:16:47 +00:00
Felix Fietkau
900aaa919b ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values)
SVN-Revision: 22353
2010-07-22 12:37:44 +00:00
Jo-Philipp Wich
d6d8014cfd fix dir-825-b1 default network config after r21905
SVN-Revision: 22005
2010-07-01 00:03:43 +00:00
Gabor Juhos
e827a12c48 ar71xx: don't use vlan 0 for devices with rtl8366s switch
SVN-Revision: 21905
2010-06-26 19:15:32 +00:00
Gabor Juhos
7bff9c0101 ar71xx: add support for the Senao EAP7660D board
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 21837
2010-06-18 16:22:05 +00:00
Gabor Juhos
518f43efd8 ar71xx: fix RB750 LED configuration
Patch-by: Ray Bellis

SVN-Revision: 21826
2010-06-17 09:24:26 +00:00
Gabor Juhos
b86e4e1c6a ar71xx: add default network config for the RB433UAH board
SVN-Revision: 21765
2010-06-12 13:20:41 +00:00
Gabor Juhos
3045632eb0 ar71xx: add default network configuration file for the RB450/RB433 boards
SVN-Revision: 21730
2010-06-08 20:19:23 +00:00
Daniel Dickinson
6bccc41f6c ar71xx: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced
SVN-Revision: 21634
2010-05-30 03:20:49 +00:00
Gabor Juhos
65dba323f7 ar71xx: Make wget2nand fail if copying the kernel fails and use the correct file extension for the rootfs image
wget2nand didnt check the exit status after copying the kernel, if the
copying failed for some reason ( for example not enougs space on the
kernel partition) it simply continued extracting the rootfs.
I also changed the filename, which wget2nand trys to download (
.tar.gz instead of .tgz ).

Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com>

SVN-Revision: 21444
2010-05-14 08:38:39 +00:00
Gabor Juhos
d6c0363884 ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
Cc: backfire@openwrt.org

SVN-Revision: 20752
2010-04-09 08:40:09 +00:00
Jo-Philipp Wich
23bebe33a7 Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.

SVN-Revision: 20722
2010-04-05 23:03:16 +00:00
Gabor Juhos
8701291f0f ar71xx: add uci defaults to fix trx header on the WRT160NL boards
* patch by Otto Solares

SVN-Revision: 20526
2010-03-27 17:38:40 +00:00
Gabor Juhos
35bb7be34d ar71xx: Add basic WLAN LED control to TL-WR1043ND
* thanks to KillaB
  * closes #6834

SVN-Revision: 20415
2010-03-25 07:31:17 +00:00
Gabor Juhos
0095ab73f3 ar71xx: fix defconfig script to work with ImageBuilder
* patch from #5722

SVN-Revision: 20231
2010-03-15 13:29:16 +00:00
Gabor Juhos
ed3aca86a6 ar71xx: don't break the existing network configuration in the wget2nand script
SVN-Revision: 20228
2010-03-15 11:03:33 +00:00
Gabor Juhos
9daf566ddc ar71xx: fix sysupgrade on the LS-SR71 board
SVN-Revision: 20119
2010-03-10 17:41:45 +00:00
Gabor Juhos
eaccbd3fb8 ar71xx: add default network configuration for the PB44 board
SVN-Revision: 20099
2010-03-09 18:05:58 +00:00
Gabor Juhos
18ee1b6dda ar71xx: add uci-defaults for the RB750 board
SVN-Revision: 20097
2010-03-09 18:05:51 +00:00
Gabor Juhos
b21308313e ar71xx: override lan port names on the RB750
SVN-Revision: 20096
2010-03-09 18:05:48 +00:00
Gabor Juhos
781c482e6a ar71xx: improve wget2nand script
SVN-Revision: 20094
2010-03-09 18:05:42 +00:00
Gabor Juhos
4d5a9fe402 ar71xx: add missing protocol definitions to default network configurations
SVN-Revision: 20091
2010-03-09 18:05:31 +00:00
Gabor Juhos
5e8c8818ed ar71xx: add preliminary support for the RouterBOARD 750
SVN-Revision: 20029
2010-03-07 05:41:01 +00:00
Gabor Juhos
52f03512dc ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin)
* closes #6782

SVN-Revision: 20006
2010-03-05 20:29:27 +00:00
Gabor Juhos
7bda582cf7 ar71xx: fix status led detection on the RB4xx boards
SVN-Revision: 20005
2010-03-05 20:29:24 +00:00
Gabor Juhos
e1bb4af48b ar71xx: add default network configuration file for the TL-WR741ND board
SVN-Revision: 19930
2010-03-01 07:34:48 +00:00
Gabor Juhos
3f7d3dc939 ar71xx: add default network configuration file for the DIR-600 rev. A1 board
SVN-Revision: 19929
2010-03-01 07:34:46 +00:00
Gabor Juhos
a6be62a4f1 ar71xx: add default network configuration file for the TL-WR1043ND board
Thanks to Andrew Tarabaras.

SVN-Revision: 19840
2010-02-24 13:39:20 +00:00
Gabor Juhos
187d5546db ar71xx: use the correct name for the status LED on the WRT400 board (thanks to chuljin, patch from #6734)
SVN-Revision: 19831
2010-02-24 13:38:37 +00:00
Gabor Juhos
560f7173b2 ar71xx: update default network configuration file for the WNDR3700
Signed-off-by: Scott Dudley <spmsink@hotmail.com>

SVN-Revision: 19830
2010-02-24 13:38:31 +00:00
Gabor Juhos
47990f61fb ar71xx: add uci configuration for the WAN LED on the WNDR3700
Based on a patch by Scott Dudley <spmsink@hotmail.com>

SVN-Revision: 19746
2010-02-19 11:52:25 +00:00
Felix Fietkau
0e84ed29ea preinit: fix mixup between led and reset button enable on some platforms (thx, cshore)
SVN-Revision: 19370
2010-01-28 19:28:02 +00:00
Felix Fietkau
56bc02a305 add preinit modularization work by Daniel Dickinson (cshore)
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00
Gabor Juhos
2b5ba9073f rtl8366_smi: move RTL8366S driver into a separate file
SVN-Revision: 19279
2010-01-22 17:38:07 +00:00
Gabor Juhos
b9328f2e04 ar71xx: change failsafe message
SVN-Revision: 19221
2010-01-18 09:15:35 +00:00
Gabor Juhos
a9c5e3159f ar71xx: update default network configuration for the WNDR3700/DIR-825-B1
Also drop the default network configuration of the TL-WR1043ND, because
the RTL8366RB switch is not yet supported by the rtl8366-smi driver.

SVN-Revision: 19217
2010-01-18 09:01:47 +00:00
Felix Fietkau
a86a28841c ar71xx: add some default configs for rtl8366 based devices
SVN-Revision: 19210
2010-01-18 00:44:52 +00:00
Felix Fietkau
3cc98b09f7 adjust switch default configs for the swconfig api change
SVN-Revision: 19209
2010-01-18 00:38:08 +00:00
Gabor Juhos
21a235bc67 ar71xx: fix typos in the ar71xx.sh
SVN-Revision: 19151
2010-01-15 12:11:05 +00:00
Gabor Juhos
cb80426641 ar71xx: add preliminary support for the Buffalo WZR-HP-G300NH
SVN-Revision: 19150
2010-01-15 12:08:03 +00:00
Gabor Juhos
58301cdeb8 ar71xx: add support for the D-Link DIR-600 rev. A1 board
SVN-Revision: 19100
2010-01-11 08:02:10 +00:00
Gabor Juhos
ac4b63a18b ar71xx: create firmware images for the AP81/PB42/PB44 boards
SVN-Revision: 19011
2010-01-02 16:30:52 +00:00
Gabor Juhos
cace9f4566 ar71xx: add support for the TL-WR841N v1.5 board
SVN-Revision: 18893
2009-12-22 19:31:28 +00:00
Gabor Juhos
1f114b0dbd ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on the patch from #6186)
SVN-Revision: 18818
2009-12-18 12:57:01 +00:00
Gabor Juhos
8bc4e3ea14 ar71xx: enable diagnostic LED on the Routerstation Pro
SVN-Revision: 18782
2009-12-15 08:35:11 +00:00
Jo-Philipp Wich
e0042b55ea fix default network config after r18699
SVN-Revision: 18708
2009-12-08 22:22:16 +00:00
Felix Fietkau
ddc2e2270b ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection (#6309)
SVN-Revision: 18699
2009-12-08 14:06:18 +00:00
Gabor Juhos
7d8a1bf239 ar71xx: TL-WR1043ND support cleanup
SVN-Revision: 18697
2009-12-08 12:46:30 +00:00
Gabor Juhos
f065bbdf7f ar71xx: DIR-825 support cleanup
SVN-Revision: 18622
2009-12-03 15:07:41 +00:00
Gabor Juhos
e4d21e0399 ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater)
SVN-Revision: 18621
2009-12-03 15:07:34 +00:00
Gabor Juhos
bd4bec689d ar71xx: create sysupgrade image for the WNDR3700
SVN-Revision: 18570
2009-11-28 08:25:56 +00:00
Gabor Juhos
ac8369a672 ar71xx: fix a typo in ar71xx.sh
SVN-Revision: 18568
2009-11-28 08:25:49 +00:00
Gabor Juhos
536a4ce5b9 ar71xx: add default network configuration file for the WNDR3700
SVN-Revision: 18566
2009-11-27 21:21:24 +00:00
Gabor Juhos
4704478682 ar71xx: add sysupgrade support for Ubiquiti XM boards
SVN-Revision: 18533
2009-11-25 09:51:31 +00:00
Gabor Juhos
bc97b5de8b ar71xx: enable failsafe on the Nanostation M/Rocket M
SVN-Revision: 18532
2009-11-25 09:51:28 +00:00
Gabor Juhos
523aba9ff9 ar71xx: create combined images for the RS, RS-PRO and LS-SR71 boards, and add sysupgrade support for them
SVN-Revision: 18531
2009-11-25 09:51:25 +00:00
Gabor Juhos
a12a03de8d ar71xx: register LEDs and buttons on the WNDR3700
Thanks to aorlinks (https://forum.openwrt.org/viewtopic.php?pid=97415#p97415)

SVN-Revision: 18435
2009-11-16 17:31:25 +00:00
Gabor Juhos
5ab66428b0 ar71xx: add preliminary support for the Netgear WNDR3700
Based on patches by Marco Porsch from:
https://forum.openwrt.org/viewtopic.php?id=22311

SVN-Revision: 18411
2009-11-13 17:11:29 +00:00
Gabor Juhos
28e212cc40 ar71xx: add default network configuration for RS and RS-Pro
SVN-Revision: 18103
2009-10-20 19:36:47 +00:00
Gabor Juhos
a525c056d5 ar71xx: add default network configuration file for the WP543 board
SVN-Revision: 18101
2009-10-20 12:59:45 +00:00
Felix Fietkau
abffbb5da7 add a defconfig for wrt160nl which contains switch settings
SVN-Revision: 17826
2009-10-02 21:07:12 +00:00
Gabor Juhos
4a99a9b7e3 ar71xx: use 'link4' LED for diagnostic on Bullet M
SVN-Revision: 17813
2009-10-01 19:41:13 +00:00
Gabor Juhos
dd3b2ae8af ar71xx: add default network configuration for the Bullet M
SVN-Revision: 17810
2009-10-01 19:41:06 +00:00
Gabor Juhos
b6ce09fea4 ar71xx: use WPS led for diagnostic on WRT160NL
SVN-Revision: 17518
2009-09-05 18:46:43 +00:00
Gabor Juhos
0b869ee143 preliminary failsafe support (closes #5726)
SVN-Revision: 17321
2009-08-19 20:16:01 +00:00
Gabor Juhos
39b7814f25 add diag script (closes #5725)
SVN-Revision: 17320
2009-08-19 19:26:53 +00:00
Gabor Juhos
a59d59be79 enable sysupgrade on the WRT160Nl
SVN-Revision: 17202
2009-08-09 14:12:24 +00:00
Gabor Juhos
304fbfa841 init mac address on the WRT160NL board (thanks to Gerry Rozema for testing)
SVN-Revision: 17124
2009-08-04 17:45:00 +00:00
Gabor Juhos
bfd20cb57d init mac address on the TEW-632BRP boards (closes #5403)
SVN-Revision: 17100
2009-08-03 07:48:21 +00:00
Gabor Juhos
9d1e01a159 fix sysupgrade
SVN-Revision: 17092
2009-08-02 09:27:38 +00:00
Gabor Juhos
5f2d2695d9 enable sysupgrade support for the TL-WR741ND
SVN-Revision: 16982
2009-07-25 19:50:26 +00:00
Gabor Juhos
227e69c0f4 add experimental sysupgrade support
SVN-Revision: 16364
2009-06-06 17:44:49 +00:00
Gabor Juhos
656f86f810 add default network configuration for the AP83 board
SVN-Revision: 16360
2009-06-06 16:01:09 +00:00
Gabor Juhos
f3c3e2772f improve MZK-W300NH support (thanks to Kazuki Shimada for the board)
SVN-Revision: 16340
2009-06-04 18:18:36 +00:00
Gabor Juhos
f6e6a733f5 add preliminary support for the WRT160NL
SVN-Revision: 16068
2009-05-25 18:36:49 +00:00
Gabor Juhos
7807c1a29f add experimental support for the Atheros PB44 board
SVN-Revision: 15928
2009-05-20 08:23:48 +00:00
Gabor Juhos
aab2d9371b add experimental support for the Linksys WRT400N board (thanks to netprince)
SVN-Revision: 15422
2009-04-26 06:40:02 +00:00
Gabor Juhos
ef537a68da ap81: register ethernet devices, and add default network configuration file
SVN-Revision: 14921
2009-03-17 18:07:16 +00:00
Gabor Juhos
fa36af494f pb42: fix ethernet, remove USB registration, add default network configuration
SVN-Revision: 14876
2009-03-14 18:28:33 +00:00
Gabor Juhos
ceb3b8c837 tew-632brp: add default network configuration
SVN-Revision: 14830
2009-03-10 08:14:26 +00:00
Gabor Juhos
dfd746cd47 add default network configuration for the RB-411 board
SVN-Revision: 14695
2009-02-28 18:55:46 +00:00
Gabor Juhos
80afab21fc add default network configuration for the AW-NR580
SVN-Revision: 14688
2009-02-27 20:49:51 +00:00
Andy Boyett
1adf135943 wnr2000: enable ar8216 workaround, add network config. LAN ports now work
SVN-Revision: 14663
2009-02-26 05:54:32 +00:00
Andy Boyett
f88c482dea defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci
SVN-Revision: 14662
2009-02-26 05:54:07 +00:00
Gabor Juhos
8e0e4cb3d8 mzk-w04nu: enable the ar8216 chip workaround, and add a default network configuration file
SVN-Revision: 14656
2009-02-25 16:48:56 +00:00
Gabor Juhos
9da4abfe58 add default network configuration for the TL-WR941ND board
SVN-Revision: 14654
2009-02-24 18:19:02 +00:00
Gabor Juhos
9be9eb8ab1 add more base-files
SVN-Revision: 14653
2009-02-24 18:16:40 +00:00
Gabor Juhos
45a4ac68a8 add wget2nand script
SVN-Revision: 12263
2008-08-10 09:20:55 +00:00