Commit graph

12717 commits

Author SHA1 Message Date
Imre Kaloz
15f6f67d18 Netgear R6100 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43382
2014-11-26 08:28:22 +00:00
Jonas Gorski
1041e3be6e brcm63xx: uci-defaults: network: move DSL-274x1 F1 to right section
The cpu port is at 8, not 5.

Fixes #18406.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43379
2014-11-25 19:07:02 +00:00
Jonas Gorski
93e5c701cc brcm63xx: unify dt image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43378
2014-11-25 19:06:51 +00:00
Jonas Gorski
5e111b0330 brcm63xx: move rsa signature to additional options
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43377
2014-11-25 19:06:43 +00:00
Jonas Gorski
e1eec53136 brcm63xx: fix image generation
This fixes build issues introduced on r43361.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43376
2014-11-25 19:06:38 +00:00
Imre Kaloz
60522c8ba7 rename overlayfs' symbol
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43375
2014-11-24 22:09:47 +00:00
John Crispin
506cf51b53 ralink: fix pci reset patch
sorry, forgot to make target/update before commiting the last patch

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43374
2014-11-24 20:39:48 +00:00
John Crispin
b994aca1e4 mpc85xx: fix missing dts target for kernel 3.14
With kernel 3.14 dts target p1010rdb was renamed to p1010rdb-pa.
To maintain compatibility define p1010rdb-pa as new standard and
copy p1010rdb.dts to p1010rdb-pa.dts under 3.10.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43371
2014-11-24 19:12:46 +00:00
John Crispin
41f9765acd ralink: add proper reset of pci core
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43370
2014-11-24 19:12:35 +00:00
John Crispin
5f51cfcf55 imx6: make the default config bootable on ventana
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43369
2014-11-24 19:12:19 +00:00
Imre Kaloz
f3df3bdb26 add initial 3.18 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43366
2014-11-24 16:00:41 +00:00
Jonas Gorski
cf0c966d9a brcm63xx: do not build images for unsupported routers
If there is no board support in the kernel, it does not make sense to
build images for devices. So drop any images for board ids for which
there are nc corresponding board_info structs in the kernel.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43364
2014-11-24 14:44:46 +00:00
Jonas Gorski
fb2a44df50 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43363
2014-11-24 14:44:40 +00:00
Jonas Gorski
c6fc6b42e1 brcm63xx: Add DT support for SPW303V
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43362
2014-11-24 14:44:33 +00:00
Jonas Gorski
5540ca300e brcm63xx: Add DT support for DV-201AMR
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43361
2014-11-24 14:44:28 +00:00
Jonas Gorski
89000dea4c brcm63xx: Add DT support for RG100A
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43360
2014-11-24 14:44:23 +00:00
Jonas Gorski
13d6fa0081 brcm63xx: Add DT support for A226G/M
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43359
2014-11-24 14:44:19 +00:00
Jonas Gorski
b3ce1c4ea6 brcm63xx: Add DT support for AGPF-S0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43358
2014-11-24 14:44:12 +00:00
Imre Kaloz
c26c5eff0e update .18 support for -rc6
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43357
2014-11-24 10:17:33 +00:00
Felix Fietkau
35902404fc ar8216: Fix issue with autoneg being disabled under 3.14, revert 43332
Patch reverts 43332 which seems to cause issues with VLAN functionality.
Add a specific check to check whether ANEG is still enabled and re-enable
it if necessary. Disable generic phy soft reset for kernel >=3.16.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43356
2014-11-24 09:33:48 +00:00
Florian Fainelli
a2768bd9e0 arm64: add ARM 64-bits target
This target can be emulated using ARM's Foundation_V8 simulator
software or qemu-system-aarch64 using the command-line described in the
README file.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43355
2014-11-24 06:34:07 +00:00
Felix Fietkau
174d16e59f ar71xx: merge changes from 3.10 that were forgotten for 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43347
2014-11-23 16:27:19 +00:00
Felix Fietkau
25cb8318cd ar71xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43344
2014-11-23 13:54:28 +00:00
Felix Fietkau
0179456212 ar71xx: switch to linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43343
2014-11-23 13:54:22 +00:00
Jonas Gorski
2bab3e2796 brcm63xx: move board compatible strings into a table
Move compatible strings from board structs into separate table. This
allows for several board compatibles to match to the same board in case
e.g. only the flash size / partitions differ.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43341
2014-11-22 12:25:52 +00:00
Zoltan Herpai
352c7d3cb2 sunxi: add config for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43338
2014-11-21 18:49:56 +00:00
Zoltan Herpai
9c54f7f312 sunxi: add initial 3.18 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43337
2014-11-21 18:42:43 +00:00
Rafał Miłecki
c84fe94b0d brcm47xx: add support for Netgear WGR614 V10
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43336
2014-11-20 22:15:21 +00:00
Felix Fietkau
c9340fd8a9 ar8216: Use generic hw_init from ar8236 for ar8216 too
We should make sure that also for ar8216 hw gets initialized.
For ar8216 hw_init is a dummy currently. The hw_init used for ar8236
should be generic enough to be usable with ar8216 too.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43334
2014-11-20 15:19:15 +00:00
Felix Fietkau
0178b516a2 ar8216: simplify PHY fixup/init
Move the PHY fixup call to the PHY init loop.
Use ar8xxx_has_gige in the PHY init instead of passing the gigE
capability via function parameter.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43333
2014-11-20 15:19:04 +00:00
Felix Fietkau
43e3e88379 ar8216: use genphy_config_aneg also for PHY 0
Kernel 3.14 introduced a switch reset in phy_init_hw in drivers/net/phy
causing BMCR_ANENABLE to get cleared.

Due to the fact that ar8xxx_phy_config_aneg does nothing for
PHY 0 autonegatiation support remains disabled.
This can cause ports to operate at 10MBit/half-duplex only.

Fix this by calling genphy_config_aneg for PHY 0 too as
genphy_config_aneg sets BMCR_ANENABLE if it's not yet set.
Fixes: ticket 17800

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43332
2014-11-19 20:18:01 +00:00
Felix Fietkau
898712f43f ar8216: factor out PHY init code into a generic function
PHY init code in the switch-specific hw_init functions is mainly
identical. Factor it out into a generic ar8xxx_phy_init function.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43331
2014-11-19 20:17:52 +00:00
Felix Fietkau
20baeb5595 ar8216: introduce fixup_phys callback in ar8xxx_chip
Move phy fixup code from the chip-specific hw_init functions into a
fixup_phys callback.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43330
2014-11-19 20:17:43 +00:00
Felix Fietkau
37fefea79b ar8216: after a switch reset poll until BCMR_RESET is cleared
Currently there is a fixed 1000ms wait time after the switch was reset.
Most if not all switches need much less time to perform a reset.
Therefore replace the fixed wait time with polling for BMCR_RESET to
be cleared.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43329
2014-11-19 20:17:37 +00:00
Felix Fietkau
6dcdc2bb05 ar8216: introduce global constant for number of PHYs
All supported switches have 5 PHYs. Currently partially 5 is hardcoded
and partially switch-specific constants exist.
Replace them with a global constant.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43328
2014-11-19 20:17:30 +00:00
Rafał Miłecki
ac7e0e69bb brcm47xx: mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43322
2014-11-19 17:35:24 +00:00
John Crispin
83381c5c8f ixp4xx: Don't overwrite memory in wg302v1_fixup()
wg302v1_fixup() looks for the ATAG_CMDLINE atag, it doesn't find it and
so it takes the last atag in the list and overwrites non allocated
memory.

The side effects are corrupted vital data and a kernel that doesn't
boot. More details here https://dev.openwrt.org/ticket/18356

The fix appends the fixup to the command line and updates the atag only
when it finds it.

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>

SVN-Revision: 43320
2014-11-19 14:09:19 +00:00
John Crispin
da5001475c gemini: add basic nas4220 board support
Few notes:
- redboot partitions are unusable
- redboot declares only 16M of RAM, hence the mem arg in cmdline and separate kernel config
- boots fine but only ethernet works for now
- split wiliboard and raidsonic boards into different subtargets

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43319
2014-11-19 14:09:10 +00:00
John Crispin
bd164f233c mpc85xx: add 3.14 kernel support for mpc85xx platform
This patch adds 3.14 kernel support for the mpc85xx platform.
Works fine here with a TL-WDR4900 which seems to be the only
supported device using this platform.
There might be differences depending on HW version, therefore
I'd ask others to test too.

Changes to 3.10
  missing config options added to 3.14 config file
  patch 001: rebased
  patch 100: rebased
  patch 110: rebased
  patch 120: rebased
  patch 130: rebased
  patch 140: minor adjustment
  patch 200: removed, change went upstream
  patch 210: rebased
  patch 220: removed, change went upstream
  patch 750: new, fixes an issue with ethernet port autoneg being
             disabled due to changes in kernel phy handling

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43308
2014-11-19 09:20:55 +00:00
John Crispin
f210f3811a ar71xx: Added support for D-link DHP-1565 rev. A1
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>

SVN-Revision: 43307
2014-11-19 09:20:47 +00:00
John Crispin
6af2109a64 ar71xx: fix switch configuration in Ubiquiti UAP Pro
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 43306
2014-11-19 09:20:18 +00:00
John Crispin
d93dc245e5 ralink: various fixes to the wm8960 setup code
still no sound but the codec is properly detected now, powers up and i can hear
noise on the speakers.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43305
2014-11-19 09:20:12 +00:00
John Crispin
989bfd815b ralink: make the dmaengine driver compile under 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43304
2014-11-19 09:20:02 +00:00
John Crispin
e1f6d0dd0a ralink: fix tx vlan offload and hardware status
hardware status and tx vlan offload support on all targets
except rt5350. so i modify the IS_ENABLE condition only for
mt7621.
support mt7621 hardware status reference by SDK. but i don't
have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE
to 0 to let software count.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43303
2014-11-19 09:19:57 +00:00
John Crispin
a5f562993e ralink: support netconsole
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43302
2014-11-19 09:19:49 +00:00
John Crispin
9c5dfd9546 ralink: improve tx vlan offload
hardware tx vlan offload only support max 16 vids
now use add/delete vlan interface to update vlan id table
when duplicate vlan id index detect.
disable hardware tx vlan offload support.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43301
2014-11-19 09:19:43 +00:00
John Crispin
510ff1f1b8 ralink: merge the mt7620a/n subtargets
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43300
2014-11-19 09:19:38 +00:00
John Crispin
752745a85a ralink: set ralink_soc on mt7621
sdhci failed to init because of this

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43293
2014-11-17 21:58:30 +00:00
John Crispin
32d4348540 ralink: fix pcie reset
some old mt7620a uboots dont reset the pcie core properly. work around this
issue in the kernel driver.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43292
2014-11-17 16:27:48 +00:00
John Crispin
5d2c810101 kernel: add the ubifs EOF marker support to 3.14 kernel
Without this patch the UBIFS driver is unable to attach to the mtd
storage and mount the root FS.

Fixes a kernel panic with Netgear WNDR4300/3700v4 devices.

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>

SVN-Revision: 43287
2014-11-17 08:34:03 +00:00