KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
25151 commits 3 branches 0 tags 154 MiB
Commit graph

1327 commits

Author SHA1 Message Date
Hauke Mehrtens
0c597a8f53 kernel: add missing config option 
SVN-Revision: 37978
 2013-09-13 20:39:23 +00:00
Hauke Mehrtens
b73b915c54 brcm47xx: board detection, GPIO for Linksys E1000 V2.1 
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.

This fixes bug #14135. Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.

Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37977
 2013-09-13 19:24:08 +00:00
Hauke Mehrtens
6c14f5f3a6 brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device 
Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37970
 2013-09-13 16:00:52 +00:00
Luka Perkov
15ea1a6d66 kernel: gsc depends on kmod-i2c-core 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37960
 2013-09-12 23:38:54 +00:00
Luka Perkov
e4c837f6d6 kernel: fix imx sata module 
The imx sata module has only been backported to imx6 target. This change will
fix buildbot errors due to missing patches in other targets. Keep this until
all targets use kernel version with imx sata support in them.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37950
 2013-09-11 22:08:46 +00:00
Luka Perkov
a43c2d4e6f kernel: add imx sata module 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37937
 2013-09-10 22:26:37 +00:00
Luka Perkov
7d73153e86 kernel: allow hwmon GSC driver for all targets 
- enable using hwmon GSC driver on all targets
- add a kmod package for it

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37933
 2013-09-10 22:26:30 +00:00
Felix Fietkau
247299bfa0 rt2x00: merge an rt2800 initialization order fix 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37922
 2013-09-09 17:31:53 +00:00
Felix Fietkau
768e6750d7 ath9k: clean up some patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37919
 2013-09-08 09:38:38 +00:00
Felix Fietkau
249c396583 mac80211: merge a big batch of upstream changes/improvements 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37918
 2013-09-08 09:38:32 +00:00
Hauke Mehrtens
bdc04e379f mac80211: kmod-rtl_pci: fix dependencies 
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37905
 2013-09-05 20:17:28 +00:00
Hauke Mehrtens
f9b790bd55 kernel: kmod-libphy, kmod-tg3: fix load order 
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37904
 2013-09-05 19:57:44 +00:00
Hauke Mehrtens
9af52f3a2c kernel: kmod-ssb, kmod-b44: fix load order 
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)

Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37903
 2013-09-05 19:56:04 +00:00
Hauke Mehrtens
fd561a47c5 kernel: kmod-firewire: fix dependencies 
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37902
 2013-09-05 19:53:21 +00:00
Hauke Mehrtens
11ae55cc95 mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware 
linux-firemware contains the same version we loaded without this patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37901
 2013-09-05 19:43:38 +00:00
Hauke Mehrtens
14a65f1cfb kernel: kmod-fs-xfs: fix dependencies 
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37900
 2013-09-05 19:41:00 +00:00
Hauke Mehrtens
09a55136d7 kernel: kmod-usb-serial-keyspan: fix dependencies 
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37899
 2013-09-05 19:39:55 +00:00
Hauke Mehrtens
82a2969100 ath10k: enable Atheros 802.11ac driver 
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.

This goes build tested, not run time tested.

[Hauke: I did some minor changes]

Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37898
 2013-09-05 19:35:14 +00:00
Gabor Juhos
b85c090177 package/rotary-gpio-custom: fix checkpatch errors module source 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37875
 2013-09-02 08:45:32 +00:00
Gabor Juhos
1928106d0d package/w1-gpio-custom: fix checkpatch errors in module source 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37874
 2013-09-02 08:45:31 +00:00
Gabor Juhos
f18a0d9547 package/i2c-gpio-custom: fix checkpatch errors in module source 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37873
 2013-09-02 08:45:30 +00:00
Gabor Juhos
6bb50e4df1 package/kernel: add spi-gpio-custom module 
The package makes it possible to create custom SPI
buses via GPIO lines.

This module is based on i2c-gpio-custom and allows to
configure an SPI bus via GPIO lines and expose it to
userspace without rebuilding the kernel. This is maily
intended to connect microcontrollers and other simple
SPI devices without making an ad-hoc kernel driver.

Signed-off-by: Marco Burato <zmaster.adsl@gmail.com>
[juhosg:
  - change subject,
  - extend and reformat commit message,
  - cleanup checkpatch errors/warnings in module source]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37872
 2013-09-02 08:45:29 +00:00
Steven Barth
0a85c59040 netfilter: Add IPv6-NAT support for kernel and ipt Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration 
SVN-Revision: 37866
 2013-09-01 17:59:48 +00:00
Gabor Juhos
6c29525f42 mac80211: add a bunch of rt2x00 specific changes 
Backport some rt2x00 specific changes from
wireless-testing/master-2013-08-26 to add
support for RT3573 based devices.

Also refresh the rt2x00 specific patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37843
 2013-08-27 10:44:06 +00:00
Felix Fietkau
eaa8cb7834 mac80211: merge a few ad-hoc mode fixes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37840
 2013-08-26 17:31:23 +00:00
Felix Fietkau
9cf157ac75 mac80211: disable CCK rates for 802.11n clients on brcmsmac to fix crash issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37839
 2013-08-26 17:31:15 +00:00
Luka Perkov
b04baf0d0c crypto: add missing depends for crypto-manager 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37817
 2013-08-21 00:36:19 +00:00
Hauke Mehrtens
2fc0c28345 broadcom-diag: remove BUFFALO_UNKNOWN 
This was itriggered by to many non buffalo devices

This closes #14043.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37804
 2013-08-17 13:43:07 +00:00
Hauke Mehrtens
e12b5ec8df broadcom-wl: Add 'N' mode support to broadcom-wl 
This is partly based on patches sent by Łukasz Kwestarz (See https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014356.html).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37802
 2013-08-17 13:38:30 +00:00
Felix Fietkau
d03d3aa58c mac80211: merge upstream change to fix mesh rssi thresholds 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37793
 2013-08-15 13:57:11 +00:00
Felix Fietkau
bbf4412bee ath9k: merge a few more cleanups/fixes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37767
 2013-08-13 10:35:18 +00:00
Felix Fietkau
253d2b511b ath9k: reorganize patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37766
 2013-08-13 10:35:14 +00:00
Felix Fietkau
ead5aa354c mac80211: merge upstream patch to suppress unnecessary ad-hoc mode scan with fixed-freq, fixed-bssid 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37764
 2013-08-13 10:35:04 +00:00
Luka Perkov
acb9bc0f5e kernel: remove imx-sdma-fw because of license issues 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37755
 2013-08-12 10:48:05 +00:00
Luka Perkov
556e850dfd kernel: add imx-sdma-fw package 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37753
 2013-08-11 15:10:42 +00:00
Felix Fietkau
fd586c0275 ath9k: fix an rx descriptor processing race condition 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37746
 2013-08-10 14:00:33 +00:00
Felix Fietkau
39ab281fae mac80211: Handle concurrent AP/STA beaconing properly 
Use the "start_disabled" option in hostapd that was added
in the earlier patch.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>

SVN-Revision: 37732
 2013-08-06 17:59:09 +00:00
Felix Fietkau
bdb2859a48 ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as upstream submission) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37716
 2013-08-06 10:31:10 +00:00
Felix Fietkau
5bce86faa2 mac80211: refresh a patch that was using the wrong patch style 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37715
 2013-08-06 10:31:06 +00:00
Felix Fietkau
48b3b74da7 mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37714
 2013-08-06 10:31:02 +00:00
Felix Fietkau
592f2c6e2b ath9k: add some more fixes for the tx queueing rework 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37713
 2013-08-06 10:30:58 +00:00
Hauke Mehrtens
3f351e2770 mac80211: rtlwifi depends on PCI or USB support in the Kconfig file 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37711
 2013-08-05 21:57:48 +00:00
Hauke Mehrtens
9d4145efe5 kernel: fix DMA error when BCM4331 is connected to BCM4706 
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37709
 2013-08-05 16:17:05 +00:00
Felix Fietkau
6743f2625b gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37702
 2013-08-05 10:32:13 +00:00
Gabor Juhos
259c36358f mac80211: fix rt2x00 dependency 
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37699
 2013-08-05 09:24:19 +00:00
Gabor Juhos
885cf1f19f mac80211: rt2x00: fix LED polarity patch 
The patch causes compiler warning ...

  <...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
  <...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]

... and runtime errors on PCI/USB devices:

  [   11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
  [   11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
  [   11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
  [   12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
  [   12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
  [   12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
  [   12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
  [   12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
  [   12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37698
 2013-08-05 09:09:41 +00:00
Gabor Juhos
3573494b19 mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb 
Closes #13951.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37697
 2013-08-05 09:09:40 +00:00
Jonas Gorski
c7976ae5f8 mac80211: add rtlwifi drivers 
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
		   usb dependencies, backport upstream fixes for Kconfig
		   issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37687
 2013-08-04 15:32:36 +00:00
Hauke Mehrtens
2fcaba306e brcm47xx: change board detection for some Asus devices 
This closes #13316

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37680
 2013-08-04 12:36:13 +00:00
Hauke Mehrtens
0d9ecfa564 kernel: kmod-appletalk: fix dependencies 
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.

This fixes the missing dependency of kmod-appletalk on psnap.ko

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37673
 2013-08-04 09:51:07 +00:00