ath9k: clean up some patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37919
This commit is contained in:
Felix Fietkau 2013-09-08 09:38:38 +00:00
parent 249c396583
commit 768e6750d7
5 changed files with 27 additions and 29 deletions

View file

@ -8,14 +8,6 @@
struct survey_info *cur_survey;
struct survey_info survey[ATH9K_NUM_CHANNELS];
@@ -905,6 +906,7 @@ struct fft_sample_ht20 {
u8 data[SPECTRAL_HT20_NUM_BINS];
} __packed;
+int ath9k_config(struct ieee80211_hw *hw, u32 changed);
void ath9k_tasklet(unsigned long data);
int ath_cabq_update(struct ath_softc *);
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1918,6 +1918,50 @@ static const struct file_operations fops
@ -52,7 +44,7 @@
+
+ sc->chan_bw = chan_bw;
+ if (!test_bit(SC_OP_INVALID, &sc->sc_flags))
+ ath9k_config(sc->hw, IEEE80211_CONF_CHANGE_CHANNEL);
+ ath9k_ops.config(sc->hw, IEEE80211_CONF_CHANGE_CHANNEL);
+
+ return count;
+}
@ -80,15 +72,6 @@
debugfs_create_file("interrupt", S_IRUSR, sc->debug.debugfs_phy, sc,
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1146,7 +1146,7 @@ int ath9k_spectral_scan_config(struct ie
return 0;
}
-static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
+int ath9k_config(struct ieee80211_hw *hw, u32 changed)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
@@ -1200,8 +1200,10 @@ static int ath9k_config(struct ieee80211
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) {

View file

@ -1,15 +1,20 @@
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1263,6 +1263,8 @@ int ath9k_config(struct ieee80211_hw *hw
return -EINVAL;
}
@@ -286,8 +286,12 @@ static int ath_reset_internal(struct ath
(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
ath9k_mci_set_txpower(sc, true, false);
+ hw->cur_power_level = sc->curtxpow / 2;
- if (!ath_complete_reset(sc, true))
+ if (!ath_complete_reset(sc, true)) {
r = -EIO;
+ goto out;
+ }
+
/*
* The most recent snapshot of channel->noisefloor for the old
* channel is only available after the hardware reset. Copy it to
@@ -1299,6 +1301,7 @@ int ath9k_config(struct ieee80211_hw *hw
+ sc->hw->cur_power_level = sc->curtxpow / 2;
out:
spin_unlock_bh(&sc->sc_pcu_lock);
@@ -1299,6 +1303,7 @@ static int ath9k_config(struct ieee80211
sc->config.txpowlimit = 2 * conf->power_level;
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);

View file

@ -28,7 +28,17 @@
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1766,6 +1766,8 @@ enum nl80211_attrs {
@@ -1460,6 +1460,9 @@ enum nl80211_commands {
* @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
* field in the probe response (%NL80211_ATTR_PROBE_RESP).
*
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1766,6 +1769,8 @@ enum nl80211_attrs {
NL80211_ATTR_CSA_C_OFF_BEACON,
NL80211_ATTR_CSA_C_OFF_PRESP,

View file

@ -21,7 +21,7 @@
if (ant_gain > max_gain)
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1297,7 +1297,10 @@ int ath9k_config(struct ieee80211_hw *hw
@@ -1299,7 +1299,10 @@ static int ath9k_config(struct ieee80211
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {

View file

@ -125,7 +125,7 @@
REG_SET_BIT(ah, AR_BTCOEX_WL_LNADIV, AR_BTCOEX_WL_LNADIV_FORCE_ON);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -458,6 +458,11 @@ irqreturn_t ath_isr(int irq, void *dev)
@@ -462,6 +462,11 @@ irqreturn_t ath_isr(int irq, void *dev)
ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */
status &= ah->imask; /* discard unasked-for bits */