Commit graph

14289 commits

Author SHA1 Message Date
Felix Fietkau
420cdb3783 ramips: fix partition layout of WHR-300HP2, WHR-1166D, WHR-600D
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45843
2015-05-29 21:25:23 +00:00
Felix Fietkau
8b42d93358 ramips: implement sysupgrade support for whr-300hp2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45842
2015-05-29 21:13:28 +00:00
Jonas Gorski
aafc3092e2 ixp4xx: use usb-*-pci where appropriate
Most boards use pci connected usb controllers, so make sure to include
the pci drivers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45840
2015-05-29 14:39:12 +00:00
Jo-Philipp Wich
dcd7479a99 sunxi: correct default package selection, fixes imagebuilder
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45839
2015-05-29 13:55:26 +00:00
Felix Fietkau
1520df3387 ar71xx: use Image/BuildKernel/Initramfs template to fix image builder errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45838
2015-05-29 13:41:41 +00:00
John Crispin
afbf104a4e generic: mount overlayfs r/o if workdir cannot be created
This is the case e.g. if JFFS2 partition is full.

see: https://www.mail-archive.com/linux-unionfs@vger.kernel.org/msg00246.html
(a small error in a logmessage was changed and reported upstream)

runtime tested on ar71xx with kernel 3.18.11 and r45772
this paritially fixes #19564

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
Acked-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45833
2015-05-29 12:36:42 +00:00
John Crispin
d2a2eb7e48 ipq806x: replace caf nss-gmac driver by upstream stmmac
This driver has been cherry-picked and backported from the following
LKML thread:
*https://lkml.org/lkml/2015/5/26/744

It also updates the DT accordingly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45831
2015-05-29 12:26:01 +00:00
John Crispin
72369c2976 ipq806x: enable kernel support for Fixed PHY emulation
Most ipq806x platforms use an ethernet switch, and the new upstream
GMAC driver makes use of the Fixed PHY emulation to force the link
settings despite the lack of PHY.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45830
2015-05-29 12:25:44 +00:00
John Crispin
fe844bf0b4 kernel: add missing STMMAC options in generic configs
STMMAC_PLATFORM and STMMAC_PCI have been added recently in the kernel,
but show up only when STMMAC driver is enabled. So se'll add it in the
generic config, so the kernel build doesn't stall whenever we enable
this driver.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45828
2015-05-29 12:25:29 +00:00
John Crispin
30bbe0b388 ipq806x: move arm-gic include into pcie patch
This include is necessary starting at the PCIe patch, which has a lower
number. So in order to keep the patches consistent, we'll move the
arm-gic include in the first patch who needs it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45827
2015-05-29 12:25:15 +00:00
John Crispin
590be1fd87 ixp4xx: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45826
2015-05-29 12:20:39 +00:00
John Crispin
a5a935b49a brcm2708: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45824
2015-05-29 11:28:54 +00:00
John Crispin
12772b66fe ipq806x: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45823
2015-05-29 11:28:44 +00:00
John Crispin
1985e88b35 gemini: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45822
2015-05-29 11:28:33 +00:00
John Crispin
9927a9a5f8 octeon: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45821
2015-05-29 11:28:20 +00:00
John Crispin
adbec3f132 ramips: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45820
2015-05-29 11:28:10 +00:00
Jo-Philipp Wich
80a933af98 au1000/au1550: fix profile package list
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45819
2015-05-29 11:04:04 +00:00
Jo-Philipp Wich
f449ba5c94 au1000/au1550: enable pcmcia support flag
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45818
2015-05-29 11:03:59 +00:00
Jo-Philipp Wich
f19757215b au1000: fix kmod-pcmcia-au1000
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45817
2015-05-29 11:03:55 +00:00
Jo-Philipp Wich
82aa281d61 mxs: fix imagebuilder
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45815
2015-05-29 08:42:50 +00:00
Jo-Philipp Wich
ae1f0d3eb4 x86/64: add e1000e to the default packages
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45814
2015-05-29 08:20:58 +00:00
Rafał Miłecki
92ebd6fdbe brcm47xx: image: fix typo in Asus WL-500gP v2 fw file name
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45811
2015-05-28 19:53:59 +00:00
Jo-Philipp Wich
7d44f7630f au1000: use srecimage.pl instead of objcopy, fixes imagebuilder
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45809
2015-05-28 15:54:01 +00:00
Jo-Philipp Wich
cb7dc3b691 ar7: fix imagebuilder
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45807
2015-05-28 13:45:33 +00:00
Jo-Philipp Wich
ba9f34a389 at91: fix imagebuilder
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45806
2015-05-28 13:25:21 +00:00
Jo-Philipp Wich
d7f6b8e3be xburst: fix imagebuilder
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45805
2015-05-28 12:25:45 +00:00
Jo-Philipp Wich
282894a407 malta: fix imagebuilder
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45804
2015-05-28 12:05:57 +00:00
Jo-Philipp Wich
e91342e285 IB: make CONFIG_IB_STANDALONE the default
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45800
2015-05-28 09:51:38 +00:00
Jo-Philipp Wich
3c5357d6ef feeds: use common macro "FeedSourcesAppend" to populate opkg configurations
This introduces a common macro to assemble the correct url templates to
avoid code duplication and have the feed config handling in a central place.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45799
2015-05-28 09:47:37 +00:00
Felix Fietkau
21e16964bf adm5120: fix subtarget dependency for kmod-pata-rb153-cf
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45798
2015-05-28 09:06:28 +00:00
Rafał Miłecki
ebd651ad99 brcm47xx: add LEDs/buttos for Asus N10U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45797
2015-05-28 08:08:17 +00:00
Rafał Miłecki
a5000c0af6 brcm47xx: drop 4.0 patch that is in 4.0.4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45796
2015-05-28 08:08:11 +00:00
John Crispin
3f9999b44b ramips: dont set illacc to y by default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45795
2015-05-27 20:06:06 +00:00
John Crispin
71621ca702 ipq806x: add missing symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45794
2015-05-27 20:05:03 +00:00
John Crispin
302a9f8982 ramips: diable ill_acc driver by default
this treacled down via the stable tree and wandered into 3.18.14

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45793
2015-05-27 20:02:04 +00:00
Imre Kaloz
9fb062cf93 mvebu: make flashing more safe
Turn on the auto recovery feature when flashing
and turn it off on successful bootup.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45792
2015-05-27 19:03:22 +00:00
Rafał Miłecki
9845d729a9 bcm53xx: build images for Asus devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45790
2015-05-27 16:20:06 +00:00
Rafał Miłecki
69aefc771f brcm47xx: build images for Asus devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45789
2015-05-27 15:37:05 +00:00
Jo-Philipp Wich
43b5730c98 sunxi: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45788
2015-05-27 15:34:48 +00:00
Jo-Philipp Wich
0cce8316d9 realview: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45787
2015-05-27 15:34:38 +00:00
Jo-Philipp Wich
f2a75b6ca4 omap: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45786
2015-05-27 15:34:30 +00:00
Jo-Philipp Wich
5258a2beec ixp4xx: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45785
2015-05-27 15:34:19 +00:00
Felix Fietkau
388404764d kernel: bridge: backport two snooping related patches
With this patch the following two patches are backported:

* bridge: fix parsing of MLDv2 reports
* bridge: allow setting hash_max + multicast_router if interface is down

The former one is an important fix which got just applied to the net-tree
and is queued for stable. The latter is a patch which is needed to make
the hash_max and multicast_router attributes configurable through
netifd.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

SVN-Revision: 45783
2015-05-27 15:20:04 +00:00
Jo-Philipp Wich
e814e946a6 gemini: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45782
2015-05-27 15:18:36 +00:00
Jo-Philipp Wich
8f032fdda1 cns3xxx: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45781
2015-05-27 15:18:29 +00:00
Jo-Philipp Wich
957534693c brcm63xx: use common image prefix
Also remove "redbootscript" and "redbootscript.padded" junk files.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Acked-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45780
2015-05-27 15:18:21 +00:00
Jo-Philipp Wich
048f46a075 brcm47xx: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45779
2015-05-27 15:04:02 +00:00
Jo-Philipp Wich
c5e59e4785 arm64: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45778
2015-05-27 14:57:38 +00:00
Felix Fietkau
83703fc076 ramips: check size after padding
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>

SVN-Revision: 45777
2015-05-27 14:56:22 +00:00
Felix Fietkau
564fdae968 kirkwood: disable TSO on the ethernet device by default, fixes data corruption issues (#19735)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45776
2015-05-27 14:56:13 +00:00
Jo-Philipp Wich
52ec6374d4 ar7: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45775
2015-05-27 14:53:25 +00:00
Rafał Miłecki
f08a10f2b9 brcm47xx: build image for Asus RT-N66U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45774
2015-05-27 13:54:19 +00:00
Jo-Philipp Wich
6c21bcaa65 IB: use online repositories
Change the IB packaging to only embed libc, kernel and kmod packages by default
and generate repositories.conf to refer to the remote package repositories.

Introduce a new config option CONFIG_IB_STANDALONE which restores the old
behaviour of building self contained IB archives.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45772
2015-05-27 11:22:20 +00:00
Imre Kaloz
f1ebb1dddd mvebu: update Linux 4.0 patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45762
2015-05-26 09:31:39 +00:00
Imre Kaloz
588acc2cba generic/4.0: update to 4.0.4
Update kernel sources and refresh some patches.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45761
2015-05-26 09:31:16 +00:00
Felix Fietkau
7c5c213621 ar71xx: fix tl-wr710n images (#19692)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45756
2015-05-26 07:13:40 +00:00
Felix Fietkau
9f0ffef86a kirkwood: disable the bogus CONFIG_IP_ADVANCED_ROUTER override (#19722)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45753
2015-05-25 22:59:15 +00:00
Felix Fietkau
7b85e8e316 mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig
Currently port 6 is shown as up 10MBit/half in LUCI and swconfig.
Reason is that all bits in the port 6 config are zero.
This means that also the aneg flag is not set and in this case
ar8216_read_port_link hardcodes the link to be up.

This is no real problem but a little annoying.
To fix this initialize port 6 with the aneg bit enabled.
This causes ar8216_read_port_link to evaluate the link status bit which is
always zero for port 6 as no PHY is connected to this port.
And it doesn't hurt as port 6 isn't connected to anything on TL-WDR4900.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 45749
2015-05-25 21:15:37 +00:00
Jonas Gorski
caea19a3e0 ramips: fix hang on boot on rt305x
Fix an upstream regression on 3.18+ that causes rt305x based devices
to hang on boot.

Fixes #19715.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45747
2015-05-25 18:02:32 +00:00
John Crispin
ab84e2d704 octeon: build squashfs image for UBNT ERLITE
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 45732
2015-05-23 15:28:20 +00:00
John Crispin
b4494d9713 ipq806x: enable cpu idle support in kernel conf
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45731
2015-05-23 15:28:11 +00:00
John Crispin
8e49b4b902 ipq806x: add & enable cpufreq support
This change set enables frequency scaling on ipq806x, which speeds-up
the CPU and allows it to achieve its max frequency.

These patches are cherry-picked & backported from the following location:
*130-132: linux-next
*133-143: LKML - https://lkml.org/lkml/2015/3/21/15
*144: derived from other qcom similar dts
*145: derived from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/drivers/cpufreq/cpufreq-krait.c

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45730
2015-05-23 15:28:02 +00:00
John Crispin
0b24527e4d ipq806x: add power regulators support
Patches are cherry-picked from linux-next. We're also adding the
corresponding config option to the kernel.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45729
2015-05-23 15:27:54 +00:00
John Crispin
f74477de48 ipq806x: disable i2c device on gsbi4
Patch cherry-picked from the following location:
https://chromium-review.googlesource.com/#/c/269931/

Disable the i2c device on gsbi4 and mark gsbi4_h and gsbi4_qup clks as
unused. If they are enabled, clock framework will turn them off at end
of probe. On ipq806x by design gsbi4_qup, gsbi4_h clks and i2c on gsbi4
are meant for RPM usage. So turning them off in kernel is incorrect.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45728
2015-05-23 15:27:45 +00:00
John Crispin
1c6d332d8f ipq806x: refresh kernel patches
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45727
2015-05-23 15:27:28 +00:00
John Crispin
66950455b7 ar71xx: Add support for the Meraki MR12 & MR16
This patch is to add support for the Meraki MR12 and MR16 Access Points.
Currently everything is working, minus the 2nd NIC interface on the MR12
which is built into the SoC.

Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com>

SVN-Revision: 45726
2015-05-23 15:27:22 +00:00
John Crispin
870cd41936 rampis: add support for status led on ASUS RT-N14U
The diag.sh script lacked an entry for the status led on the RT-N14U,
map it to the asus:blue:power led which is also used by the boot loader
to report boot status (eg. TFTP recovery mode VS normal boot)

Signed-off-by: Matteo Panella <m.panella@level28.org>

SVN-Revision: 45725
2015-05-23 15:27:10 +00:00
John Crispin
9c86abae0e ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router
MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB
and 1 ethernet port.  The original product information can be found at:
http://www.aximcom.com/en/MR-102N

Signed-off-by:	Tai-hwa Liang <atliang@gmail.com>

SVN-Revision: 45724
2015-05-23 15:27:05 +00:00
John Crispin
4810f3f803 ramips: fix switch names for several boards in device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45723
2015-05-23 15:26:51 +00:00
John Crispin
5e96c2d541 ramips: add support for Comfast CF-WR800N
This patch adds support for Comfast CF-WR800N, a wall-plug wireless router
based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 45722
2015-05-23 15:26:39 +00:00
John Crispin
230efe318f lantiq: Fix initialization of the PCI IRQs when PCIe is also enabled
There are already ifx_pcie_bios_{map_irq,plat_dev_init} hooks defined in
ifxmips_pcie.c. Instead of defining a new hook we simply re-use the
existing ones (this is basically what the lantiq BSP code does).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 45718
2015-05-23 15:25:59 +00:00
John Crispin
390924e662 lantiq: Fix PCIe bus when PCI is also enabled.
The PCIe bus seems to require a hack/workaround when PCI is enabled as
well. Unfortunately this is guarded by an CONFIG_IFX_PCI ifdef, which is
only defined in lantiq's BSP code. The config symbol for the upstream
lantiq PCI driver is CONFIG_PCI_LANTIQ.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 45717
2015-05-23 15:25:51 +00:00
Hauke Mehrtens
47eca7a1ca bcm53xx: add OHCI (USB 1.1) support
There is also a OHCI controller, activate it for USB 1.1 support.

This should close #19601.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 45716
2015-05-23 14:54:44 +00:00
Jonas Gorski
dc60b7fffa arm64: enable new errata backported to 3.18
3.18.13 introduced a bunch of new errata, enable them to be on the
safe side.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45715
2015-05-22 22:51:37 +00:00
Jonas Gorski
4e2b4d8072 kernel: add missing generic config symbol
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45714
2015-05-22 22:51:34 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Jonas Gorski
4bb7b2186e brcm63xx: fix failsafe lan and status led for DSL-274xB rev. F1
Add it to the appropriate places so the power led properly works
and ethernet is properly configured for failsafe.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45709
2015-05-21 19:32:00 +00:00
Jonas Gorski
509c3211d6 brcm63xx: Add Huawei HG655b support
This patch adds support for the Huawei HG655b.

Nothing much special in this router, it's just another BCM6368 with
a Ralink RT3062 wifi chip and the calibration data embedded in the
main flash chip at offset 0x7c0000. There is also configuration data
used by the OEM firmware before the cal_data partition, this area is
protected by the board_data partition in this patch.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45708
2015-05-21 19:31:54 +00:00
Steven Barth
53098a8aa5 generic/4.0: fix error during kernel patch application
Commit 5168c9a5702648eb690d32ec821647aca80aeba9 introduced a regression
during patch application on the 4.0 kernel. Some of the patched content
doesn't match the actual code, therefore leading to the following error:
  Applying patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch
  patching file net/ipv6/ip6_output.c
  Hunk #1 FAILED at 886.
  1 out of 1 hunk FAILED -- rejects in file net/ipv6/ip6_output.c
  patching file net/ipv6/route.c
  Hunk #1 succeeded at 2247 (offset 2 lines).
  Patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch does not apply (enforce with -f)

This change just adapts the actual patch to fix what is in kernel 4.0
and make it apply cleanly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45705
2015-05-20 19:23:33 +00:00
Imre Kaloz
c4c4cce190 mvebu: supress useless in-cpu rtc init on the Mamba
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45704
2015-05-19 22:54:05 +00:00
Steven Barth
1296956908 linux: backport IPv6 SAS fixes for source-specific routes
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 45699
2015-05-19 07:43:59 +00:00
Rafał Miłecki
63bb7c51db bcm53xx: add Asus RT-AC87U partitioning hacky workaround
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45694
2015-05-17 12:10:38 +00:00
Rafał Miłecki
75b8e247e3 bcm53xx: try to fix network on Asus RT-AC87U
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).

One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45692
2015-05-16 17:14:25 +00:00
Rafał Miłecki
ab83610563 bcm53xx: use backported Asus RT-AC87U DT patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45691
2015-05-16 15:44:00 +00:00
Rafał Miłecki
abed46aacc bcm53xx: enable RT-AC87U UART console
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 45690
2015-05-16 11:45:52 +00:00
Rafał Miłecki
3dd9274332 bcm53xx: add support for SmartRG SR400ac
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45686
2015-05-13 20:01:15 +00:00
Rafał Miłecki
b4ecf19faa bcm53xx: replace DT patches with backports from stblinux
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45685
2015-05-13 20:01:03 +00:00
Rafał Miłecki
af019cad56 bcm53xx: use of_machine_is_compatible helper in b53 fix
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45684
2015-05-13 14:34:23 +00:00
Rafał Miłecki
afb98aea4d bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45683
2015-05-13 13:12:57 +00:00
Rafał Miłecki
610ee0d85a bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45682
2015-05-13 13:11:17 +00:00
Rafał Miłecki
2d3aaa2d2f bcm53xx: fix default network interface on Netgear R8000
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45681
2015-05-13 13:11:04 +00:00
Rafał Miłecki
45ec92fa30 bcm53xx: bgmac: add support for the 3rd core
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45680
2015-05-13 13:11:00 +00:00
Rafał Miłecki
d2e5e2bf54 bcm53xx: sync NVRAM and SPROM drivers with upstream version
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45678
2015-05-13 08:30:45 +00:00
Rafał Miłecki
260383aeb1 kernel: backport struct ssb_sprom changes submitted by MIPS tree
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45677
2015-05-13 07:52:43 +00:00
Rafał Miłecki
e93c68eedd b53: Allow using all ports on BCM53012
This chipset has at least 8 usable ports, e.g. Netgear R8000 has ports
5, 7 and 8 connected to Ethernet interfaces:
vlan1ports=0 1 2 3 5 7 8*
vlan2ports=4 8u
Port 6 seems to be always disabled.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45676
2015-05-12 13:18:53 +00:00
Felix Fietkau
6ceb1b0358 ar71xx: convert tl-wr741nd v1/v2 to new image building code, add infrastructure for building the loader
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45672
2015-05-11 09:08:33 +00:00
Felix Fietkau
ac0e2479dc mtd: remove the warning about read-only caused by size vs. block boundary mismatch
Since the kernel/rootfs split handling was modified 2 years ago by r37283 (
https://dev.openwrt.org/changeset/37283 ) and by the subsequent checkins,
users have seen rather scary mtd errors in the log at every boot. The message
ends "-- forcing read-only", which looks a bit error-like. That error has
been mentioned in some forum threads, when users have noticed this message
instead of some actual error.

[    2.940000] 0x000000070000-0x000000ff0000 : "firmware"
[    2.970000] 2 netgear-fw partitions found on MTD device firmware
[    2.970000] 0x000000070000-0x000000188440 : "kernel"
[    2.980000] mtd: partition "kernel" must either start or end on erase
block boundary or be smaller than an erase block -- forcing read-only
[    2.990000] 0x000000188440-0x000000ff0000 : "rootfs"

The patch removes the rather useless warning message.

signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 45669
2015-05-10 16:09:58 +00:00
Felix Fietkau
b33752051f ar71xx: add platform_pre_upgrade for sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45667
2015-05-10 13:54:25 +00:00
Felix Fietkau
9ebb99cb98 kernel: fix regression in backtrace module info change (#19631)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45665
2015-05-10 13:16:40 +00:00
Felix Fietkau
cfb56b4811 ipq806x: add pcie support to ipq806x based platforms
This change adds PCIe support to IPQ806x based platforms. The driver is
actually cherry-picked from the following LKML thread:
*https://lwn.net/Articles/643086/ (patches 110-111)

We also add here an additional fix to support multiple PCI controllers
on the same platform (patch 112), and to patch the ap148 & dbs149 DTS
files (patch 113).

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45663
2015-05-10 11:47:09 +00:00