KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
8616 commits 3 branches 0 tags 154 MiB
Commit graph

1980 commits

Author SHA1 Message Date
Imre Kaloz
b3e20537ca libnl: backport memleak fix 
SVN-Revision: 11500
 2008-06-16 12:43:16 +00:00
Imre Kaloz
593c2b7cec fix libnl compile with older kernels 
SVN-Revision: 11499
 2008-06-16 12:42:36 +00:00
Felix Fietkau
f2e997ac38 remove some unused crap 
SVN-Revision: 11472
 2008-06-15 11:15:35 +00:00
Felix Fietkau
ddd809f9e5 (6/6) bcm57xx: package 
This is the bcm57xx package.  I have tested default vlan functions,
but I dont have the equipment to test more advanced setups.  The default
vlan setup seems to be working fine.  I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.

I'm not sure which method is best for autoload.  For the wrt350n, I
need the activate_gpio parameter.  But its probably not a good idea
to add that to the autoload file.  On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on?  I tried using 'request_module' from
there, but had no success.  For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11471
 2008-06-15 11:11:28 +00:00
Felix Fietkau
40990382e5 (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered 
This patch prevents switch-robo.c from attempting robo_probe on a port
that is already registered.  robo_probe will adjust kernel reference counts
if it detects a switch on the port.  If this patch wasn't applied, the
wrt350n would hang on reboot, waiting for the network driver reference count
to reach zero indefinitely.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11469
 2008-06-15 11:10:27 +00:00
Felix Fietkau
f7e09198fe (1/6) bcm57xx: init from diag 
I've been working to finish up the bcm57xx module package nbd
posted a few months ago.  I am no expert, just had some spare
time and some motivation.  Here is the background:

https://dev.openwrt.org/ticket/2744

This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP.  If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11466
 2008-06-15 11:09:27 +00:00
Peter Denison
464ed48321 Remove ssb headers from mac80211 to avoid conflict with in-kernel ones 
SVN-Revision: 11462
 2008-06-13 21:05:26 +00:00
Felix Fietkau
7c029b0355 another patch fix 
SVN-Revision: 11455
 2008-06-13 08:56:06 +00:00
Felix Fietkau
ad9bc6ab09 fix a small comment 
SVN-Revision: 11454
 2008-06-13 07:30:21 +00:00
Felix Fietkau
01c61b0d64 fix ANI and make use of it in all modes except for monitor 
SVN-Revision: 11453
 2008-06-13 01:51:31 +00:00
John Crispin
456893e798 make ip-up scripts aware of network settings 
SVN-Revision: 11446
 2008-06-11 20:03:08 +00:00
John Crispin
0bf765b362 system now knows which timezone it is in 
SVN-Revision: 11445
 2008-06-11 19:59:16 +00:00
Florian Fainelli
6d88031192 Add syskonnect yukon2 support (#2568) 
SVN-Revision: 11437
 2008-06-11 15:51:23 +00:00
Felix Fietkau
62bef2bced madwifi: remove unnecessary part of the 349-reset.patch, add an ANI fix for future HALs 
SVN-Revision: 11409
 2008-06-09 10:17:36 +00:00
Peter Denison
ea8b4cb0d7 Compilation fix for hostapd with newer mac80211 code. Thanks Hauke Mehrtens. Fixes #3501 
SVN-Revision: 11407
 2008-06-08 20:19:19 +00:00
Gabor Juhos
50a749e9a7 add button-hotplug driver, will be usable to check status of buttons connected to GPIO lines 
SVN-Revision: 11401
 2008-06-07 18:25:32 +00:00
Felix Fietkau
06447d5cfa oops. accidentally committed the wrong patch version 
SVN-Revision: 11395
 2008-06-07 15:11:21 +00:00
Felix Fietkau
60e3586f6f fix madwifi on linux 2.4 
SVN-Revision: 11385
 2008-06-06 23:53:03 +00:00
John Crispin
51b28d44a9 use default gateway for routes that have no gw specified, Signed off by: Brian J. Murrell 
SVN-Revision: 11380
 2008-06-06 18:49:23 +00:00
Imre Kaloz
7a72cfdd2a add little endian arm wpa_supplicant config file 
SVN-Revision: 11369
 2008-06-05 17:15:12 +00:00
Felix Fietkau
036b397595 fix sysupgrade 'do_upgrade: not found' error 
SVN-Revision: 11362
 2008-06-04 23:20:56 +00:00
Felix Fietkau
b4d1c134da upgrade uci to 0.4.2 - fixes some escaping and library issues 
SVN-Revision: 11361
 2008-06-04 22:43:26 +00:00
Peter Denison
b2a1f5e79b Update b43 from compat-wireless-2008-05-26 codebase 
SVN-Revision: 11358
 2008-06-04 19:47:48 +00:00
Peter Denison
e8620fa5aa Update mac80211 to compat-wireless-2008-05-26 
SVN-Revision: 11357
 2008-06-04 19:47:27 +00:00
Peter Denison
238a618093 Update libnl to compile on and after 2.6.25 
SVN-Revision: 11356
 2008-06-04 19:45:46 +00:00
Travis Kemen
b35e663111 add wpa-eap uci configs Signed-off-by: David Bird <david@coova.com> 
SVN-Revision: 11355
 2008-06-04 18:18:58 +00:00
Felix Fietkau
0b66a7d614 upgrade uci to 0.4.1 improves uci.foreach and uci.get_all in the lua binding no longer records changes for uci set with oldval == newval 
SVN-Revision: 11354
 2008-06-04 15:28:46 +00:00
Felix Fietkau
c8ed362edd move the uci lua plugin to /usr/lib/lua instead of /usr/lib/lua/5.1 
SVN-Revision: 11353
 2008-06-04 15:12:44 +00:00
Imre Kaloz
7bb65fb9d7 add preliminary Marvell Orion support 
SVN-Revision: 11352
 2008-06-04 13:51:17 +00:00
Imre Kaloz
0244e57bb9 refresh madwifi patches using upstream style 
SVN-Revision: 11351
 2008-06-04 13:16:18 +00:00
Felix Fietkau
49499dfbd1 update uci to v0.4.0 - improves lua binding 
SVN-Revision: 11348
 2008-06-03 21:43:32 +00:00
Steven Barth
5da5342fda Updated Dnsmasq to 2.42 (#3498) 
SVN-Revision: 11339
 2008-06-03 15:06:20 +00:00
Gabor Juhos
f9518d9a74 netfilter/iptables: enable IMQ on 2.6.25 
SVN-Revision: 11335
 2008-06-02 19:46:47 +00:00
Florian Fainelli
82247228ea We do not need to make the experimental/install-experimental targets starting with 1.4.x version 
SVN-Revision: 11325
 2008-06-02 11:54:05 +00:00
Felix Fietkau
40720b6d20 madwifi: fix cflags for generic mips hal 
SVN-Revision: 11319
 2008-06-01 12:08:02 +00:00
Felix Fietkau
193949d2c6 fix madwifi menuconfig (thx, Othello) 
SVN-Revision: 11318
 2008-06-01 06:00:25 +00:00
Felix Fietkau
3f1f985692 add missing export 
SVN-Revision: 11317
 2008-06-01 03:40:10 +00:00
Felix Fietkau
a91f7dcfd8 madwifi: refresh patches 
SVN-Revision: 11316
 2008-06-01 03:01:58 +00:00
Felix Fietkau
c05f60e0d0 madwifi: clean up scanning code, add support for changing scan lists 
SVN-Revision: 11315
 2008-06-01 03:00:59 +00:00
Felix Fietkau
17a7cfb3a7 madwifi: update to sam leffler's latest hal fixes LED on wisoc fixes rx sensitivity issues improves throughput on all cards/devices enhances link stability 
SVN-Revision: 11314
 2008-06-01 03:00:32 +00:00
Felix Fietkau
3e0c844379 clean up performance patch, add some head/tailroom calculation fixes (thx, benoit) fix some unused variables 
SVN-Revision: 11313
 2008-06-01 00:11:32 +00:00
Felix Fietkau
e97b3f0b95 madwifi build scripts cleanup 
SVN-Revision: 11312
 2008-06-01 00:11:14 +00:00
Felix Fietkau
90baadbedc fix wpa_supplicant cflags 
SVN-Revision: 11311
 2008-06-01 00:10:26 +00:00
Steven Barth
80219efc2d updated OpenSSL to 0.9.8h 
SVN-Revision: 11309
 2008-05-31 15:52:11 +00:00
Florian Fainelli
6fab96eb3e Add Siemens SE505v2 detection to diag (#3416) 
SVN-Revision: 11308
 2008-05-31 12:32:05 +00:00
Florian Fainelli
b11e790e7a Fix ATM usb device selection (#3429) 
SVN-Revision: 11307
 2008-05-31 12:14:02 +00:00
Felix Fietkau
5ad3720371 This Makefile patch adds support for the "Privacy Extensions", "IP-in-IPv6 tunnel", "Multiple Routing Tables" and "source address based routing" in the 2.6 Kernel. 
Signed-off-by: "Alina Friedrichsen" <x-alina-ml@gmx.net>

SVN-Revision: 11288
 2008-05-29 09:27:33 +00:00
Imre Kaloz
20fbb8b151 move the fconfig package into trunk 
SVN-Revision: 11274
 2008-05-27 13:21:12 +00:00
Nicolas Thill
ae879baa57 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 
SVN-Revision: 11272
 2008-05-26 22:57:51 +00:00
Matteo Croce
7e9f396980 fixed mount path (closes #3464) 
SVN-Revision: 11267
 2008-05-25 20:03:00 +00:00
Florian Fainelli
29365f1d14 Fix compilation of lm77 module (#3447) 
SVN-Revision: 11256
 2008-05-24 14:16:23 +00:00
Florian Fainelli
85fa20921a Fix mount utilites installation (#3464) 
SVN-Revision: 11255
 2008-05-24 13:37:36 +00:00
Felix Fietkau
554ddcf755 fix liblua symlink installation 
SVN-Revision: 11245
 2008-05-23 07:09:29 +00:00
Steven Barth
f3bc063753 Added missing header reference to InstallDev target 
SVN-Revision: 11241
 2008-05-22 20:26:23 +00:00
Felix Fietkau
d8d15cb1c0 fix lua compile issues on ixp4xx (EABI) by linking libgcc into liblua 
SVN-Revision: 11240
 2008-05-22 14:20:56 +00:00
Felix Fietkau
6fa85238f5 add updated lua patchset from Steven Barth (cyrus) as explained in http://lists.openwrt.org/pipermail/openwrt-devel/2008-May/002170.html 
SVN-Revision: 11239
 2008-05-22 14:20:36 +00:00
Peter Denison
f027ecb2cf Stopgap compilation fixes for diag and switch under 2.6.25 
SVN-Revision: 11231
 2008-05-20 22:33:45 +00:00
Peter Denison
de5c50cfe4 Update iproute2 to version 2.6.25, and fixup patches 
SVN-Revision: 11230
 2008-05-20 22:17:26 +00:00
Matteo Croce
ac8bf03f8e create /etc/fstab on boot (closes #3458) 
SVN-Revision: 11225
 2008-05-20 19:02:19 +00:00
Steven Barth
f2de1dec21 Merge branch 'openssl' 
SVN-Revision: 11224
 2008-05-20 18:12:08 +00:00
Matteo Croce
0a1c669ec1 fix some wrong paths 
SVN-Revision: 11217
 2008-05-19 22:08:46 +00:00
Matteo Croce
925ad245e0 avr32: add watchdog driver 
SVN-Revision: 11192
 2008-05-18 23:13:25 +00:00
Rod Whitby
6a79ee257d sound: Remove atheros restriction, since atheros can have usb sound cards 
SVN-Revision: 11168
 2008-05-18 11:54:49 +00:00
Florian Fainelli
d543939042 Add support for OTI6858 and ARK3116 usb serial converters (#3442) 
SVN-Revision: 11167
 2008-05-18 11:21:28 +00:00
Felix Fietkau
eb2e08d894 ifndef is not supported inside make variable expansion 
SVN-Revision: 11165
 2008-05-17 20:13:29 +00:00
Rod Whitby
c715985c97 base-files: Update /etc/init.d/fstab with new location of swapon and swapoff (they moved from /sbin to /usr/sbin) 
SVN-Revision: 11157
 2008-05-17 00:13:05 +00:00
Yuji Mano
9788ab458c update version 
SVN-Revision: 11154
 2008-05-16 18:56:04 +00:00
Rod Whitby
aff3215d29 modules/other.mk: Enable bluetooth for atheros 
SVN-Revision: 11150
 2008-05-16 16:35:04 +00:00
Florian Fainelli
99b6b35be3 Add support for Asus wl-520gc 
SVN-Revision: 11145
 2008-05-16 01:18:57 +00:00
Travis Kemen
3f8eaeb2c3 This patch adds a number of configuration options to the MadWifi package. You can now configure the HAL, bus, default rate control algorithm as well as the debug mode from within make menuconfig. The goal is to be able to support hardware profiles with different HALs without messing around with the Makefile directly. Signed-off-by: Axel Gembe <ago@bastart.eu.org> 
SVN-Revision: 11140
 2008-05-15 00:59:34 +00:00
Peter Denison
72d40dec08 Allow package/switch to compile against 2.6.25 
SVN-Revision: 11138
 2008-05-14 15:03:05 +00:00
Ralph Hempel
6d4c89c7f5 adding check for /proc/net/vlan/config (==vlan enabled kernel) 
SVN-Revision: 11132
 2008-05-13 09:21:17 +00:00
Peter Denison
06c7c04288 Fix typo in broadcom-diag LED output enable 
SVN-Revision: 11125
 2008-05-12 19:46:53 +00:00
Andy Boyett
e136c5203d Fix kmod-ata-piix deps 
SVN-Revision: 11121
 2008-05-12 06:41:12 +00:00
Andy Boyett
bd06be4f73 Package nvidia sata driver 
SVN-Revision: 11120
 2008-05-12 06:40:54 +00:00
Andy Boyett
78b7201f2a Package AHCI driver 
SVN-Revision: 11119
 2008-05-12 06:40:37 +00:00
Andy Boyett
0ff7ae2d6c Package VIA sata driver 
SVN-Revision: 11118
 2008-05-12 06:40:18 +00:00
Nicolas Thill
94940b2265 disable ip6tables as well on 2.6.25 until we have working IMQ support 
SVN-Revision: 11117
 2008-05-11 22:41:49 +00:00
Nicolas Thill
70a8c455b0 fix fuse: use in-kernel module for 2.6.25+ kernels 
SVN-Revision: 11116
 2008-05-11 22:27:32 +00:00
Nicolas Thill
e93e293b41 add a macro to compare kernel patch versions and use it for crypto and watchdog changes in 2.6.24+ kernels (closes: #3402) 
SVN-Revision: 11115
 2008-05-11 20:56:51 +00:00
Nicolas Thill
2b05ed626c add a package for the badblocks utility (closes: #3404) 
SVN-Revision: 11107
 2008-05-11 10:33:34 +00:00
Nicolas Thill
d7f96cfa50 fix typos in [11073] 
SVN-Revision: 11094
 2008-05-09 07:16:15 +00:00
Nicolas Thill
a7b3ffc182 cosmetic change: rename IPT_NAT_DEFAULT & IPT_NAT_EXTRA to IPT_NATHELPER & IPT_NATHELPER_EXTRA respectively, to better match package names 
SVN-Revision: 11073
 2008-05-08 11:32:46 +00:00
Nicolas Thill
50ee10f486 package/kernel fixes: - remove dup netfilter.mk includes - always define NF_KMOD so that proper KCONFIG entries are emitted for netfilter modules at DUMP time 
SVN-Revision: 11072
 2008-05-08 11:16:07 +00:00
Travis Kemen
162a814ef4 only ignore dhcp but still listen for dns closes #3406 
SVN-Revision: 11062
 2008-05-08 00:01:58 +00:00
Felix Fietkau
31a3a503cc add a flag "IGNORE_ERRORS", which can be used to ignore build errors in packages 
SVN-Revision: 11059
 2008-05-07 16:45:00 +00:00
Yuji Mano
80e1190c4f add missing udevextras package option - edd_id 
SVN-Revision: 11053
 2008-05-05 21:58:03 +00:00
Yuji Mano
7d9a522254 add ps3-dump-bootloader to package install 
SVN-Revision: 11052
 2008-05-05 21:49:24 +00:00
Felix Fietkau
ffc0827b65 fix lua compile configuration error 
SVN-Revision: 11047
 2008-05-04 17:48:26 +00:00
Nicolas Thill
b99ab355c1 remove dependency on zd1211-firmware, since it was removed in [11022] 
SVN-Revision: 11040
 2008-05-03 23:24:12 +00:00
John Crispin
1dce440fa5 revert borked commit 
SVN-Revision: 11038
 2008-05-03 20:28:13 +00:00
John Crispin
3141b38fd8 make etrax serial driver register its device nodes, so we get a console 
SVN-Revision: 11037
 2008-05-03 20:12:43 +00:00
Felix Fietkau
ae92bf4ae4 upgrade to uci 0.3.4 - extends lua bindings and fixes a bug that rejected "-" in uci package names 
SVN-Revision: 11030
 2008-05-03 17:08:39 +00:00
John Crispin
b6b32f8131 remove old zd firmware 
SVN-Revision: 11022
 2008-05-03 15:10:51 +00:00
Nicolas Thill
3d4052492d ppp/pptp fixes: - prevent ppp from logging to /etc/ppp/connect-errors (closes: #2989) - add dependency on ppp and kmod-gre to pptp - bump release number 
SVN-Revision: 11018
 2008-05-03 12:11:35 +00:00
Matteo Croce
fe5b220467 acx100 fix by nabcore 
SVN-Revision: 11011
 2008-05-02 18:48:47 +00:00
Gabor Juhos
1b90498e69 IMQ is not yet available on 2.6.25 
SVN-Revision: 11007
 2008-05-02 11:29:53 +00:00
Nicolas Thill
11135c2a35 more use of the new GPIO_SUPPORT option 
SVN-Revision: 10998
 2008-05-02 00:30:39 +00:00
Gabor Juhos
3c05234962 kmod-ipt-iprange: fix build error on .25 
SVN-Revision: 10992
 2008-04-30 15:42:10 +00:00
Rod Whitby
d05cc5d68d block.mk: Added ata-ixp4xx-cf module support for tw5334 board. 
SVN-Revision: 10986
 2008-04-30 05:16:17 +00:00
Gabor Juhos
ec5f168c66 import w1-gpio-custom driver from the Squidge (http://squidge.sourceforge.net/) project 
SVN-Revision: 10982
 2008-04-29 18:31:43 +00:00
Gabor Juhos
275ae38814 kernel/modules: modify AutoLoad levels of the W1 modules 
SVN-Revision: 10981
 2008-04-29 18:13:32 +00:00
Gabor Juhos
4006f2fbdd kernel/modules: make use the new GPIO_SUPPORT option 
SVN-Revision: 10980
 2008-04-29 17:21:08 +00:00
Gabor Juhos
363c6e196a remove the i2c-gpio-custom driver from adm5120, and make it available on all platforms 
SVN-Revision: 10979
 2008-04-29 17:18:21 +00:00
Gabor Juhos
9a3fa80e0d add Dallas's 1-wire related packages 
SVN-Revision: 10977
 2008-04-29 15:53:04 +00:00
Felix Fietkau
19cb0b3693 fix lua cflags 
SVN-Revision: 10971
 2008-04-28 22:00:57 +00:00
Imre Kaloz
a4dd1adf4a add preliminary support for Storm SL3512 based devices, not ready yet 
SVN-Revision: 10956
 2008-04-27 17:03:01 +00:00
Florian Fainelli
9389aa93ff Use the locally mirrored compat-wireless tarblall (#3377) 
SVN-Revision: 10951
 2008-04-27 01:47:32 +00:00
Imre Kaloz
3f788c241b generate and install NPE-A ethernet microcode as well 
SVN-Revision: 10945
 2008-04-26 10:00:04 +00:00
Andy Boyett
e569db2e4b only build kmod-hwmon-pc87360 for x86 
SVN-Revision: 10933
 2008-04-23 21:46:02 +00:00
Felix Fietkau
2c3018e0da initramfs: start one hotplug2 for coldplugging and one for handling events between coldplug and end of /init 
SVN-Revision: 10930
 2008-04-23 16:20:46 +00:00
Felix Fietkau
7232fe9150 use the right hotplug2 invocation for initramfs 
SVN-Revision: 10928
 2008-04-23 14:28:13 +00:00
Gabor Juhos
8b011c593d base-files: fix a typo 
SVN-Revision: 10927
 2008-04-23 14:19:35 +00:00
Felix Fietkau
e9f183265d leave ack/cts setting alone by default 
SVN-Revision: 10926
 2008-04-23 04:58:34 +00:00
Felix Fietkau
eb13a77879 move timeout trigger for protection mode to node timeout trigger 
SVN-Revision: 10925
 2008-04-23 03:50:01 +00:00
Felix Fietkau
eff0b609c0 clean up cwmin/cwmax defines and remove some wrong values which made minstrel a bit inaccurate 
SVN-Revision: 10924
 2008-04-23 03:49:42 +00:00
Felix Fietkau
16767f8db3 madwifi: put an upper limit on the amount of sampling that minstrel should do when the link changes its status from very good to slightly bad. the previous version of the patch could have resulted in erratic rate control behavior when there was a lot of sampling backlog. 
SVN-Revision: 10921
 2008-04-22 23:35:27 +00:00
Felix Fietkau
0b341be6c0 This patch re-adds the udev and hotplug2 initialization fixes originally present in /init but was removed when some code was moved from /init to /etc/preinit in rev 10870. This adds udev initialization and only handles hotplug2 initialization when hotplug2 is present. 
Signed-off-by: Yuji Mano <yuji.mano@am.sony.com>

SVN-Revision: 10912
 2008-04-22 19:22:05 +00:00
Nicolas Thill
8231561bce move hotplug2 & udevtrigger to base section 
SVN-Revision: 10910
 2008-04-21 22:31:07 +00:00
Matteo Croce
227af4b113 assign names to filesystems when mounting virtual ones (closes #3340) 
SVN-Revision: 10903
 2008-04-21 18:08:05 +00:00
Felix Fietkau
7637ba2bf8 add some more fine tuning for madwifi 
SVN-Revision: 10900
 2008-04-21 03:45:52 +00:00
Felix Fietkau
73663230c8 madwifi: add configurable rssi threshold and timeout values for protection mode the 11b protection mode can harm throughput a lot, so let's make sure that it is only active as long as it needs to be. 
SVN-Revision: 10899
 2008-04-21 03:45:39 +00:00
Felix Fietkau
3e03e66d7a reorder patches 
SVN-Revision: 10898
 2008-04-21 03:45:22 +00:00
Felix Fietkau
13c5a1b2d5 madwifi: remove the minstrel_mrr hack and add two patches that massively improve minstrel's performance and response time 
SVN-Revision: 10897
 2008-04-21 02:39:40 +00:00
Felix Fietkau
456e3823f4 fix a some txq races (merge from madwifi-trunk) 
SVN-Revision: 10895
 2008-04-20 22:01:27 +00:00
Felix Fietkau
3de189af5d add missing kmod-hid module (thx, fish) 
SVN-Revision: 10894
 2008-04-20 21:01:03 +00:00
Nicolas Thill
6b8489761c build the kmod-video-quickcam module only if it was selected 
SVN-Revision: 10881
 2008-04-20 09:49:13 +00:00
Nicolas Thill
eb8375839a don't build acx* kernel modules on UML 
SVN-Revision: 10880
 2008-04-20 09:48:04 +00:00
Felix Fietkau
41fb282b6d remove some redundant code 
SVN-Revision: 10870
 2008-04-20 03:24:43 +00:00
Matteo Croce
ac5cfeb417 fix swap{on,off} path 
SVN-Revision: 10863
 2008-04-19 14:36:01 +00:00
Florian Fainelli
b5ddac51df Adm5120 also supports generic GPIO, allow gpioctl to be built (#3132) 
SVN-Revision: 10857
 2008-04-17 17:34:04 +00:00
Florian Fainelli
353e3305a5 Mark rt61 as 2.6.23 only (#3337) 
SVN-Revision: 10856
 2008-04-17 17:11:34 +00:00
Felix Fietkau
1147d2137e more performance for madwifi :) 
SVN-Revision: 10855
 2008-04-17 16:37:36 +00:00
Gabor Juhos
52383189dc use the spi-ks8995 driver on the WRT55AG v2 boards 
SVN-Revision: 10853
 2008-04-17 13:12:57 +00:00
Gabor Juhos
25bd89017f spi-ks8995: fix a compiler warning, fix the copyright header 
SVN-Revision: 10852
 2008-04-17 13:11:11 +00:00
Gabor Juhos
efbc2a21d2 add a driver for the KS8995 ethernet switch, will be usable to control the switch on some boards 
SVN-Revision: 10851
 2008-04-17 09:59:09 +00:00
Felix Fietkau
94ddba360e add performance improvement for madwifi on low-memory systems 
SVN-Revision: 10850
 2008-04-17 02:40:55 +00:00
Felix Fietkau
9a7d1bec79 remove udevextras dependency on udev (thx, fish) 
SVN-Revision: 10847
 2008-04-15 17:19:41 +00:00
Travis Kemen
37b0cc9a10 fix restart on platforms without a setup_switch() 
SVN-Revision: 10846
 2008-04-15 16:29:49 +00:00
Gabor Juhos
67fd9d7fba move spi_gpio driver into the kernel, clean-up SPI modules 
SVN-Revision: 10844
 2008-04-15 07:33:43 +00:00
Gabor Juhos
d80f43d15f update iptables to 1.4.0 (2.6 kernels only), refresh kernel patches 
SVN-Revision: 10843
 2008-04-15 06:11:23 +00:00
Nicolas Thill
2a4a0c2bcc explicitely disable a bunch of package on ar7 until we properly detect pci & usb support at configure time 
SVN-Revision: 10839
 2008-04-15 02:08:11 +00:00
Nicolas Thill
d07eb95838 mark b44 as broken, it doesn't build anymore due to SSB changes apparently (closes: #3333) 
SVN-Revision: 10838
 2008-04-15 01:56:41 +00:00
Imre Kaloz
41cf84f819 do target dependent optimizations 
SVN-Revision: 10834
 2008-04-14 13:24:30 +00:00
Imre Kaloz
9a1c5fdb6d udevtrigger shouldn't depend on udev, we use it standalone for hotplug2 
SVN-Revision: 10833
 2008-04-14 13:20:04 +00:00
Nicolas Thill
e2c65f6215 mark all openswan packages as broken 
SVN-Revision: 10832
 2008-04-14 12:31:27 +00:00
Andy Boyett
6eb6f7fd46 Mark broken packages as broken: - acx-mac80211 - openswan - aodv-uu 
SVN-Revision: 10831
 2008-04-14 11:18:29 +00:00
Nicolas Thill
0791acfc21 package shared library as well (partially closes: #3030) 
SVN-Revision: 10829
 2008-04-14 02:06:35 +00:00
Felix Fietkau
0dd8c59f10 upgrade uci to 0.3.3, build lua plugin 
SVN-Revision: 10818
 2008-04-13 14:34:42 +00:00
Felix Fietkau
77760bba21 remove lua's dependency on libreadline and libncurses 
SVN-Revision: 10817
 2008-04-13 14:34:36 +00:00
Nicolas Thill
37066ff2b2 fix udevextras build when no extras were actually selected 
SVN-Revision: 10816
 2008-04-13 14:20:34 +00:00
Nicolas Thill
98f3ce2545 mac80211 / compat-wireless fixes: * build in KERNEL_BUILD_DIR * only build kernel module if it's selected 
SVN-Revision: 10815
 2008-04-13 13:35:02 +00:00
Nicolas Thill
cb30800bf6 update libnl to 1.1 
SVN-Revision: 10814
 2008-04-13 13:22:15 +00:00
Felix Fietkau
1563615bed move lua from packages/ to trunk in anticipation of upcoming stuff ;) 
SVN-Revision: 10806
 2008-04-13 01:06:12 +00:00
Jeremy Kerr
c127031b74 Replace udev-vol-id pacakge with configurable udevextras 
Instead of just having one vol_id package, create a 'udevextras' package
for all of the udev "EXTRAS" utilities. Selecting this package allows
each extra to be selected individually.

Also, installing udevextras adds a few udev rules for persistent device
naming.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

SVN-Revision: 10805
 2008-04-12 23:32:44 +00:00
Jeremy Kerr
199a79d867 Group input devices under /dev/input 
This change adds a udev rules file to group input devices (via symlinks)
under their usual expected location of /dev/input.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

SVN-Revision: 10804
 2008-04-12 23:24:22 +00:00
Jeremy Kerr
4ec5f133bb Use new kexec tools 
Horms' new kexec-tools repository has a number of updates and fixes for
kexec, and also supports the PS3.

This change updates the kexec repo, and adds a few build-system patches
to make it work with OpenWRT.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

SVN-Revision: 10803
 2008-04-12 23:20:31 +00:00
Nicolas Thill
e2e1b51b41 fix build on linux >= 2.6.23 
SVN-Revision: 10801
 2008-04-12 22:04:09 +00:00
Nicolas Thill
c30a473d46 package/ov51x-jpeg: * update to 1.5.7 * add userland package * add fallback url (closes: #3216) 
SVN-Revision: 10800
 2008-04-12 20:43:38 +00:00
Nicolas Thill
e1cafed715 disable kmod-mmc-over-gpio on x86 
SVN-Revision: 10799
 2008-04-12 20:28:54 +00:00
Nicolas Thill
a08643d7ab add missing MMC config symbol 
SVN-Revision: 10798
 2008-04-12 20:27:48 +00:00
Nicolas Thill
6ca5374194 package/qc-usb: * update to 0.6.6 (closes: #3215) * fix build on linux > 2.6.23 
SVN-Revision: 10796
 2008-04-12 20:20:41 +00:00
Travis Kemen
bae7e5bebb add missing include in restart 
SVN-Revision: 10794
 2008-04-12 14:57:47 +00:00
Yuji Mano
410d40f6e5 Add ps3 target specific utilities package 
SVN-Revision: 10791
 2008-04-11 21:21:17 +00:00
Florian Fainelli
867145bd32 Fix errors on capifs loading (#3250) 
SVN-Revision: 10789
 2008-04-11 14:21:06 +00:00
Florian Fainelli
f0e627da97 Fix hostapd compilation errors on STA_INFO (#3308) 
SVN-Revision: 10784
 2008-04-10 14:28:14 +00:00
Florian Fainelli
1063bac7d4 Fix typo in the payload option for br2684ctl (#3318) 
SVN-Revision: 10783
 2008-04-10 14:09:04 +00:00
Felix Fietkau
56223a6f79 madwifi: remove reset delay - seems like it's not necessary anymore 
SVN-Revision: 10777
 2008-04-09 19:55:08 +00:00
Florian Fainelli
ce754ec644 Disable drivers that we do not package within the mac80211 package (everything except rt2x00) 
SVN-Revision: 10775
 2008-04-09 19:20:07 +00:00
Felix Fietkau
081ebaca76 fix the 3g interface configuration 
The first problem is the "chat" command which misses "-E", so the
environment variable addressed inside the script is never used and
the script breaks.

The second problem is the that you cannot assume an Option card when
you did "not discover a Novatel".
In my case the script tried to set the mode with the Option
AT-command which failed on the Huawei stick.
Unfortunaltely I don't have a correct command for that device, so I
just want to start the connection without any mode set before thus using
the defaults.

Signed-off-by: Markus Wigge <mwigge@marcant.net>

SVN-Revision: 10774
 2008-04-09 15:35:34 +00:00
Felix Fietkau
511908059a upgrade uci to 0.3.1 - fixes a parser problem 
SVN-Revision: 10772
 2008-04-08 19:51:15 +00:00
Felix Fietkau
99e6b2d7dc fix a dependency bug 
SVN-Revision: 10769
 2008-04-07 23:29:41 +00:00
Gabor Juhos
5798590c7c add a polled GPIO buttons input driver 
SVN-Revision: 10766
 2008-04-07 19:54:44 +00:00
Felix Fietkau
3c94156b28 fix use of uci_set_state in network scripts (thx, netprince) 
SVN-Revision: 10763
 2008-04-07 16:02:50 +00:00
Florian Fainelli
081afd037e Use the 2008-04-07 snapshot, also mirrored to downloads.openwrt.org 
SVN-Revision: 10755
 2008-04-07 08:48:20 +00:00
Florian Fainelli
8f38048f1f Migrate rt2x00 to the compat-wireless version 
SVN-Revision: 10753
 2008-04-07 07:29:37 +00:00
Felix Fietkau
3ae4858088 fix the route to the pptp server when using pptp as wan interface 
SVN-Revision: 10751
 2008-04-07 01:07:50 +00:00
Felix Fietkau
0cb8228277 add timer fix by mmp from http://forum.openwrt.org/viewtopic.php?id=14841 
SVN-Revision: 10750
 2008-04-07 00:24:26 +00:00
Felix Fietkau
978958a888 upgrade to broadcom-wl 4.150.10.5.2 
SVN-Revision: 10749
 2008-04-07 00:24:19 +00:00
Florian Fainelli
52315c5150 Fix layer7 user-space iptables compilation (#3307) 
SVN-Revision: 10745
 2008-04-06 18:01:53 +00:00
Felix Fietkau
88cb2e91d6 revert iproute2 to the old version until the new one is fixed (#3026) 
SVN-Revision: 10744
 2008-04-06 17:13:00 +00:00
Florian Fainelli
720acc785a This rt2x00 version only compiles for 2.6.24 (#3211) 
SVN-Revision: 10743
 2008-04-06 15:41:43 +00:00
Florian Fainelli
ef3c5ee59f Switch to compat-wireless 
SVN-Revision: 10742
 2008-04-06 13:40:45 +00:00
Florian Fainelli
80769eb3f0 Fix typo 
SVN-Revision: 10741
 2008-04-06 10:47:51 +00:00
Florian Fainelli
d8b6908430 rt2500 cvs will not build on 2.6.24 
SVN-Revision: 10740
 2008-04-06 10:47:24 +00:00
Florian Fainelli
8b0dffad62 2.6.24 rt2x00 version needs more objects to produce the library 
SVN-Revision: 10737
 2008-04-06 09:52:32 +00:00
Andy Boyett
24c9bbe5f7 Install libuci and headers in staging_dir 
SVN-Revision: 10732
 2008-04-04 21:48:43 +00:00
Matteo Croce
633e548e01 fix typo(2) in watchdog init script 
SVN-Revision: 10727
 2008-04-03 21:01:16 +00:00
Matteo Croce
cd4447d269 fix typo in watchdog init script 
SVN-Revision: 10726
 2008-04-03 20:59:18 +00:00
John Crispin
b526f65baf add gpio support to atheros, fixes #1861, thanks Othello 
SVN-Revision: 10724
 2008-04-03 20:28:10 +00:00
Florian Fainelli
dd2afbeee3 Start the watchdog daemon if a harware watchdog is present 
SVN-Revision: 10721
 2008-04-03 14:36:10 +00:00
Florian Fainelli
825915f38f Make sure we will build USB hid support 
SVN-Revision: 10719
 2008-04-03 13:51:14 +00:00
Felix Fietkau
f4f7d687f0 fix interface enumeration issues related to /var/state/network (thx to fish for debugging this) 
SVN-Revision: 10715
 2008-04-02 21:27:28 +00:00
Florian Fainelli
a1114db1e8 Fix kmod-nls-* dependency under brcm-2.4 
SVN-Revision: 10712
 2008-04-02 15:00:37 +00:00
Florian Fainelli
add755735a Add routed support to br2684 
Signed-off-by: Juan I. Gonzalez <juan.i.gonzalez at subdown dot net>

SVN-Revision: 10710
 2008-04-02 13:00:06 +00:00
Florian Fainelli
3b72dadac9 Upgrade fuse-2.7.1 to fuse-2.7.3 to fix breakage (#3246) 
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

SVN-Revision: 10698
 2008-04-01 20:02:27 +00:00
Felix Fietkau
ec02c6dd90 add a package for the udev vol_id utility (thx, fish) 
SVN-Revision: 10697
 2008-04-01 14:25:29 +00:00
Felix Fietkau
54d981bccb fix dnsmasq compilation on some systems 
SVN-Revision: 10696
 2008-03-31 21:17:45 +00:00
Andy Boyett
c15de3860c Add support for the WL-500gP v2 
SVN-Revision: 10693
 2008-03-31 08:04:56 +00:00
Andy Boyett
e229b1b849 Add support for the ASUS WL-520gU 
SVN-Revision: 10692
 2008-03-31 08:04:27 +00:00
Andy Boyett
a6a59ce520 broadcom-diag cleanup 
SVN-Revision: 10691
 2008-03-31 08:04:06 +00:00
Travis Kemen
f97e92cee0 add frameburst closes #1759 
SVN-Revision: 10689
 2008-03-29 21:10:24 +00:00
Florian Fainelli
6bfbf6a5af Add support for the C19 revision of the ACX111 firmware (#3280) 
SVN-Revision: 10686
 2008-03-29 17:58:15 +00:00
Travis Kemen
1bdcabb1cf fix wrong description name 
SVN-Revision: 10684
 2008-03-29 05:30:43 +00:00
Travis Kemen
4b467fd22e add sdcard support for avr32 platforms 
SVN-Revision: 10683
 2008-03-29 05:16:10 +00:00
Florian Fainelli
d0556cda49 Allow setting mac80211 interface into ad-hoc mode (#3247) 
SVN-Revision: 10677
 2008-03-27 18:47:59 +00:00
Florian Fainelli
6776a34d73 Create the kmod-spi package and load mmc_over_gpio after spi (#3273) 
SVN-Revision: 10675
 2008-03-27 18:36:56 +00:00
Florian Fainelli
f6631d7bd4 Fix the watchdog path for the SCX200 watchdog driver 
Signed-off-by: Roberto Riggio <roberto.riggio@create-net.org>

SVN-Revision: 10672
 2008-03-27 16:50:07 +00:00
Florian Fainelli
e9c19c7de9 Create a dummy sit package for 2.4 kernelsq 
SVN-Revision: 10668
 2008-03-27 15:44:14 +00:00
Florian Fainelli
9a3d8e3163 Load xt_layer7 for 2.6 kernels (#3269) 
SVN-Revision: 10667
 2008-03-27 14:47:54 +00:00
Travis Kemen
6703cacfde This upgrades dnsmasq-2.40 to dnsmasq-2.41. Signed-off-by: Alexandros C. Couloumbis <alex at ozo.com> 
SVN-Revision: 10663
 2008-03-26 16:26:59 +00:00
Travis Kemen
af4faf3373 This patch fixes missing hwmon-vid module error on LM77 package build. hwmon-vid is not a dependency for LM77 so it does not get build. Signed-off-by: Vasilis Tsiligiannis <acinonyxs@yahoo.gr> 
SVN-Revision: 10657
 2008-03-25 15:18:16 +00:00
Michael Büsch
414325c08c mmc_over_gpio: Add initscript that will create a device Note that we should use a config file where we can define an arbitrary number of devices. 
SVN-Revision: 10638
 2008-03-21 17:38:16 +00:00
Michael Büsch
12b5a779b9 linux-2.6: Add a driver to run an MMC or SD card over a GPIO based SPI interface. 
SVN-Revision: 10637
 2008-03-21 16:52:27 +00:00
Travis Kemen
e1ea7361df fix a bug causing the init script to fail and incorrect number of lan ports 
SVN-Revision: 10635
 2008-03-20 20:11:21 +00:00
Felix Fietkau
0e58011e62 madwifi: add support for drop-in hal replacements 
SVN-Revision: 10629
 2008-03-20 06:57:01 +00:00
Andy Boyett
69c4c6c5a9 Revert r10553 "fix channel change bugs," causes kernel oopses. Closes #3213. 
SVN-Revision: 10628
 2008-03-20 01:57:27 +00:00
Travis Kemen
515e65dd5a fix broken init file and some cleanup 
SVN-Revision: 10613
 2008-03-18 03:16:32 +00:00
Florian Fainelli
3b9efe808d Fix compilation of fuse with 2.6.24 
SVN-Revision: 10609
 2008-03-16 20:32:45 +00:00
Andy Boyett
79d3f5e8ec bumped wpa_supplicant to 0.5.10 
SVN-Revision: 10608
 2008-03-16 18:33:37 +00:00
Michael Büsch
c8ffd446c9 gpioctl: Allow build on bcm47xx 
SVN-Revision: 10604
 2008-03-15 20:00:30 +00:00
Michael Büsch
4769134ec3 gpioctl get: Fix typo in the printf arguments. 
SVN-Revision: 10603
 2008-03-15 19:59:45 +00:00
Michael Büsch
6a2a1e251b Check the return values of kmalloc() 
SVN-Revision: 10599
 2008-03-13 15:22:46 +00:00
John Crispin
cb354d2750 make madwifi startup script aware of new iwpriv options 
SVN-Revision: 10598
 2008-03-13 14:54:26 +00:00
Matteo Croce
5ef201120c ar7-atm: patch was against an older tarball, fixear7-atm: patch was against an older tarball, fixedd 
SVN-Revision: 10590
 2008-03-11 17:39:54 +00:00
Matteo Croce
f89eeb69b5 ar7-atm: apply patch well 
SVN-Revision: 10589
 2008-03-11 17:16:13 +00:00
Matteo Croce
d8e61674a5 ar7-atm: fix sysctl (closes #3122) 
SVN-Revision: 10588
 2008-03-11 01:25:07 +00:00
Felix Fietkau
0308392977 fix ixp4xx-microcode compile on osx 
SVN-Revision: 10583
 2008-03-10 22:45:34 +00:00
Matteo Croce
59b5ba7441 ar7-atm: add an useful patch from #2561, tnx Axel Gembe 
SVN-Revision: 10576
 2008-03-09 17:58:43 +00:00
Florian Fainelli
8bd1e72bd0 Upgrade x86 to 2.6.24 
SVN-Revision: 10575
 2008-03-09 11:21:18 +00:00
Florian Fainelli
fef15a956c Fix rt2x00 compilation and upgrade to the current mainline version (2.6.24) 
SVN-Revision: 10573
 2008-03-09 10:55:19 +00:00
Matteo Croce
3d66117ef0 Fix two of the three bugs in #3122 
SVN-Revision: 10571
 2008-03-08 19:10:40 +00:00
John Crispin
d0a1717399 add new led trigger for network traffic, fixes #2776 
SVN-Revision: 10567
 2008-03-07 21:34:54 +00:00
John Crispin
43a3b5a53a this package should only be available for targets with generic gpio support, fixes #3132 
SVN-Revision: 10564
 2008-03-07 15:31:29 +00:00
John Crispin
18e061bd2a made ppp usepeerdns configurable, fixes #3187 
SVN-Revision: 10562
 2008-03-07 11:18:54 +00:00
Florian Fainelli
f5708f2369 Add PCnet32 ethernet support (#3195) 
SVN-Revision: 10558
 2008-03-07 10:47:23 +00:00
Florian Fainelli
8d30372bdc Make the syslog ring-buffer size configurable (#3204) 
SVN-Revision: 10557
 2008-03-07 10:44:13 +00:00
Felix Fietkau
b5a90e5cd9 madwifi: add patches for maximum and minimum rate (thx, SeG) 
SVN-Revision: 10555
 2008-03-07 01:36:41 +00:00
Felix Fietkau
9712028f88 madwifi: don't deliver broadcast frames to vaps that aren't up 
SVN-Revision: 10554
 2008-03-07 01:06:41 +00:00
Felix Fietkau
0c8a2085f9 fix channel change bugs 
SVN-Revision: 10553
 2008-03-07 01:06:37 +00:00
Felix Fietkau
b3767e965e include noise in stats struct 
SVN-Revision: 10552
 2008-03-07 01:06:31 +00:00
Felix Fietkau
eec5e041bb debugging fixes 
SVN-Revision: 10551
 2008-03-07 01:06:26 +00:00
Felix Fietkau
e5bafab092 madwifi: napi polling fixes 
SVN-Revision: 10550
 2008-03-07 01:06:23 +00:00
Gabor Juhos
69083f6e4d kernel/modules/usb: add support for the cp2101 USB to serial converter, thanks to bifferos (closes: #3175) 
SVN-Revision: 10548
 2008-03-06 19:28:42 +00:00
Florian Fainelli
c3c83c6574 Fix typo 
SVN-Revision: 10544
 2008-03-04 15:50:41 +00:00
Florian Fainelli
62b0af39c7 Also call setup_switch on network restart 
SVN-Revision: 10540
 2008-03-02 14:56:13 +00:00
Felix Fietkau
d65241e13b fix switch-robo.c compile errors on linux 2.4 
SVN-Revision: 10539
 2008-03-01 15:34:17 +00:00
Travis Kemen
e8bbb631e3 remove the packages repo as it is not compatable with trunk 
SVN-Revision: 10537
 2008-02-29 02:41:39 +00:00
Travis Kemen
603f612d83 Fix a wrong variable names (ifname, wan) and enhance httpd's init script by more configurable options. Signed-off-by: Lubos Stanek (lubek) <lubek@lubek.name> 
SVN-Revision: 10536
 2008-02-28 19:56:09 +00:00
Michael Büsch
a9cddc69ec Fix the roboswitch code for the WRT350N 
SVN-Revision: 10531
 2008-02-27 22:35:41 +00:00