KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/package
History
Felix Fietkau ddd809f9e5 (6/6) bcm57xx: package 
This is the bcm57xx package.  I have tested default vlan functions,
but I dont have the equipment to test more advanced setups.  The default
vlan setup seems to be working fine.  I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.

I'm not sure which method is best for autoload.  For the wrt350n, I
need the activate_gpio parameter.  But its probably not a good idea
to add that to the autoload file.  On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on?  I tried using 'request_module' from
there, but had no success.  For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11471
2008-06-15 11:11:28 +00:00
..
acx remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
acx-mac80211 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
admswconfig fix a bug causing the init script to fail and incorrect number of lan ports 2008-03-20 20:11:21 +00:00
alsa move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
aodv-uu Mark broken packages as broken: - acx-mac80211 - openswan - aodv-uu 2008-04-14 11:18:29 +00:00
ar7-atm ar7-atm: patch was against an older tarball, fixear7-atm: patch was against an older tarball, fixedd 2008-03-11 17:39:54 +00:00
arptables refresh all package patches in the buildroot using quilt 2007-06-04 11:25:53 +00:00
b43 Update b43 from compat-wireless-2008-05-26 codebase 2008-06-04 19:47:48 +00:00
base-files system now knows which timezone it is in 2008-06-11 19:59:16 +00:00
br2684ctl Fix typo in the payload option for br2684ctl (#3318) 2008-04-10 14:09:04 +00:00
bridge-utils remove duplicate include statement 2007-09-28 01:23:17 +00:00
broadcom-57xx (6/6) bcm57xx: package 2008-06-15 11:11:28 +00:00
broadcom-diag (1/6) bcm57xx: init from diag 2008-06-15 11:09:27 +00:00
broadcom-mmc DESCRIPTION:= is obselete 2007-10-14 04:46:38 +00:00
broadcom-wl add timer fix by mmp from http://forum.openwrt.org/viewtopic.php?id=14841 2008-04-07 00:24:26 +00:00
busybox Fix a wrong variable names (ifname, wan) and enhance httpd's init script by more configurable options. Signed-off-by: Lubos Stanek (lubek) <lubek@lubek.name> 2008-02-28 19:56:09 +00:00
button-hotplug add button-hotplug driver, will be usable to check status of buttons connected to GPIO lines 2008-06-07 18:25:32 +00:00
comgt fix the 3g interface configuration 2008-04-09 15:35:34 +00:00
dnsmasq Updated Dnsmasq to 2.42 (#3498) 2008-06-03 15:06:20 +00:00
dropbear move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
e2fsprogs add a package for the badblocks utility (closes: #3404) 2008-05-11 10:33:34 +00:00
ebtables bump package versions after updates 2007-09-07 20:41:57 +00:00
fconfig move the fconfig package into trunk 2008-05-27 13:21:12 +00:00
fonera-mp3 fixes bug that causes mp3 stream to hang is server is not fast enough 2007-09-11 17:34:52 +00:00
fonera-mp3-drv Removed redundant '-r' flags for cp. Fixes compilation on BSD/Darwin. 2007-12-05 18:45:35 +00:00
foxboard-utils Fix typos and add quotes, potentially fix build failures with ccache (#2533) 2007-10-16 13:54:32 +00:00
fuse fix fuse: use in-kernel module for 2.6.25+ kernels 2008-05-11 22:27:32 +00:00
gdbserver Use $(CP) instead of $(INSTALL_BIN) for binaries. 2007-12-09 18:53:06 +00:00
gmp remove uninstalldev templates (no longer necessary) 2007-12-25 01:40:47 +00:00
gpioctl more use of the new GPIO_SUPPORT option 2008-05-02 00:30:39 +00:00
grub more package submenus 2007-10-18 19:08:16 +00:00
gspcav1 Upgrade gspcav1 to 20071224 (#2922) 2008-01-06 12:44:23 +00:00
hostap-driver push a couple of fixes upstream from Acinonyx 2008-02-15 00:33:31 +00:00
hostap-utils replace common -I and -L search flags with TARGET_CPPFLAGS and TARGET_LDFLAGS 2007-03-28 00:35:26 +00:00
hostapd Compilation fix for hostapd with newer mac80211 code. Thanks Hauke Mehrtens. Fixes #3501 2008-06-08 20:19:19 +00:00
hotplug2 move hotplug2 & udevtrigger to base section 2008-04-21 22:31:07 +00:00
i2c-gpio-custom remove the i2c-gpio-custom driver from adm5120, and make it available on all platforms 2008-04-29 17:18:21 +00:00
ifenslave move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
iproute2 Update iproute2 to version 2.6.25, and fixup patches 2008-05-20 22:17:26 +00:00
ipsec-tools replace cflags hacks with the correct solution 2007-12-29 20:31:48 +00:00
ipset mark ipset as 2.6 only 2007-10-20 20:03:52 +00:00
iptables netfilter/iptables: enable IMQ on 2.6.25 2008-06-02 19:46:47 +00:00
isakmpd remove a hack that is no longer necessary 2007-07-12 13:43:59 +00:00
iw make sure iw doesn't get compiled on older kernels 2007-11-30 11:33:31 +00:00
ixp4xx-microcode generate and install NPE-A ethernet microcode as well 2008-04-26 10:00:04 +00:00
kernel Add syskonnect yukon2 support (#2568) 2008-06-11 15:51:23 +00:00
kexec-tools update version 2008-05-16 18:56:04 +00:00
keynote replace cflags hacks with the correct solution 2007-12-29 20:31:48 +00:00
libertas Updating libertas wireless driver to latest version. 2008-01-24 03:03:04 +00:00
libjson-c remove uninstalldev templates (no longer necessary) 2007-12-25 01:40:47 +00:00
libnl Update libnl to compile on and after 2.6.25 2008-06-04 19:45:46 +00:00
libpcap remove uninstalldev templates (no longer necessary) 2007-12-25 01:40:47 +00:00
libtool patch Makefile.am for GLOBAL_LIBDIR as well 2007-12-28 16:48:15 +00:00
linux-atm remove uninstalldev templates (no longer necessary) 2007-12-25 01:40:47 +00:00
linux-uvc add linux-uvc patch from #2842 2007-12-12 21:45:35 +00:00
lua fix liblua symlink installation 2008-05-23 07:09:29 +00:00
mac80211 Remove ssb headers from mac80211 to avoid conflict with in-kernel ones 2008-06-13 21:05:26 +00:00
madwifi another patch fix 2008-06-13 08:56:06 +00:00
mmc_over_gpio more use of the new GPIO_SUPPORT option 2008-05-02 00:30:39 +00:00
mtd move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
ncurses remove uninstalldev templates (no longer necessary) 2007-12-25 01:40:47 +00:00
nozomi move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
nvram upgrade to broadcom-wl 4.150.10.5.2 2008-04-07 00:24:19 +00:00
nw802-2.4 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
openssl updated OpenSSL to 0.9.8h 2008-05-31 15:52:11 +00:00
openswan mark all openswan packages as broken 2008-04-14 12:31:27 +00:00
ov51x-jpeg remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
p54 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
pcmcia-cs Use $(CP) instead of $(INSTALL_BIN) for binaries. 2007-12-09 18:53:06 +00:00
ppp make ip-up scripts aware of network settings 2008-06-11 20:03:08 +00:00
pptp ppp/pptp fixes: - prevent ppp from logging to /etc/ppp/connect-errors (closes: #2989) - add dependency on ppp and kmod-gre to pptp - bump release number 2008-05-03 12:11:35 +00:00
ps3-utils add ps3-dump-bootloader to package install 2008-05-05 21:49:24 +00:00
qc-usb build the kmod-video-quickcam module only if it was selected 2008-04-20 09:49:13 +00:00
qos-scripts Load xt_layer7 for 2.6 kernels (#3269) 2008-03-27 14:47:54 +00:00
robocfg move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
rt61 Mark rt61 as 2.6.23 only (#3337) 2008-04-17 17:11:34 +00:00
rt2500 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
rt2570 move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
shfs fix mount.shfs symlink issue 2007-12-13 21:04:18 +00:00
spca5xx-le fix build on linux >= 2.6.23 2008-04-12 22:04:09 +00:00
spca5xx-view rename packages dependecies missed from [8806] 2007-09-16 19:21:23 +00:00
spi-ks8995 spi-ks8995: fix a compiler warning, fix the copyright header 2008-04-17 13:11:11 +00:00
strongswan bump package versions after updates 2007-09-07 20:41:57 +00:00
switch (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered 2008-06-15 11:10:27 +00:00
uci upgrade uci to 0.4.2 - fixes some escaping and library issues 2008-06-04 22:43:26 +00:00
udev add missing udevextras package option - edd_id 2008-05-05 21:58:03 +00:00
util-linux-ng fixed mount path (closes #3464) 2008-05-25 20:03:00 +00:00
w1-gpio-custom import w1-gpio-custom driver from the Squidge (http://squidge.sourceforge.net/) project 2008-04-29 18:31:43 +00:00
wireless-tools package shared library as well (partially closes: #3030) 2008-04-14 02:06:35 +00:00
wpa_supplicant add little endian arm wpa_supplicant config file 2008-06-05 17:15:12 +00:00
wrt55agv2-spidevs use the spi-ks8995 driver on the WRT55AG v2 boards 2008-04-17 13:12:57 +00:00
yamonenv major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets 2007-09-08 19:55:42 +00:00
zlib remove uninstalldev templates (no longer necessary) 2007-12-25 01:40:47 +00:00
Makefile add a flag "IGNORE_ERRORS", which can be used to ignore build errors in packages 2008-05-07 16:45:00 +00:00