Commit graph

39508 commits

Author SHA1 Message Date
Ben Greear
d8c559d614 ath10k-ct firmware: Tx-hang and EAPOL handling fixes for wave-2 firmware.
Changes since last LEDE release include:

  *  Fix key-setting bug that broke sending the EAPOL 2/4 in some cases.  This was a
     bug I introduced some time back while trying to fix .11r and simplify the key
     handling logic.  (Patch to wpa_supplicant fixed the race with sending the 4/4
     and setting the key...un-patched supplicant will still have this race and the 4-way
     auth will not work as reliably.)

  *  Increase amount of active-tids that can be scheduled.  This fixes a tx-stall
     seen with many station vdevs.

  *  Fix bug in upstream code that would cause the maximum peer to never be scheduled
     for tx.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2017-10-12 23:40:27 +02:00
Yangbo Lu
67c0c5978d layerscape: only support 64-bit for ls1088ardb/ls2088ardb
This is no requirement and plan to support 32-bit for ls1088ardb
and ls2088ardb. Current 32-bit firmware for them couldn't work,
so only keep 64-bit support for these two boards in menuconfig.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-12 23:40:27 +02:00
Yangbo Lu
4f3ddcb0e9 layerscape: fix compile issue for usb ehci-fsl driver
When build firmware for layerscape target with CONFIG_ALL_NONSHARED=y,
there would be a compile issue of usb ehci-fsl driver. Actually this
driver was for PPC platforms initially and was not ready for non-PPC
now, but a kernel kconfig patch removed PPC dependency for it. So that
kernel patch should be reverted.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-12 23:40:26 +02:00
Hauke Mehrtens
27f23bac8f ar71xx: fix section mismatches
Fix some section mismatches found with kernel 4.9.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 22:36:04 +02:00
Hauke Mehrtens
7bbf4117c6 ar71xx: Add kernel 4.9 support
This add support for kernel 4.9 to the ar71xx target.
It was compile tested with the generic, NAND and mikrotik subtarget.
Multiple members of the community tested it on their boards and did not
report any major problem so far.

Especially the NAND part received some changes to adapt to the new
kernel APIs. The serial driver hack used for the Arduino Yun was not
ported because the kernel changed there a lot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 22:32:39 +02:00
Hauke Mehrtens
2909a4b78e brcm47xx: relocate the stack in loader
By default we are reusing the stack provided by CFE, like it is intended
by CFE. On my WRT54GS it is located at 0x8043BF30, so a big kernel image
could overwrite it. Relocate it to a different memory region which is
still under the 8MB RAM, but in the higher area. We only need this
memory region for the stack of the loader, Linux will set up this
for its own.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 21:36:24 +02:00
Hauke Mehrtens
d5cf4a5aa4 brcm47xx: relocate loader to higher address
The boot process on a WRT54GL works the following way:
1. CFE gets loaded by the boot rom from flash
2. CFE loads the loader from the flash and gzip uncompresses it
3. CFE starts the loader
4. The loader stores the FW arguments and relocates itself to
   BZ_TEXT_START (now 0x80600000)
5. The loader reads the Linux image from flash
6. The loader lzma decompresses the Linux image to LOADADDR (0x80001000)
7. The loader executes the uncompress Linux image at LOADADDR

The BZ_TEXT_START was set to 0x80400000 before. When the kernel gets
uncompressed and is bigger than BZ_TEXT_START - LOADADDR it overwrote
the loader which was currently uncompressing it and made the board
crash. Increase the BZ_TEXT_START my 2 MB to have more space for the
kernel. Even on 16MB RAM devices the memory goes till 0x80FFFFFF so this
should not be a problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 21:36:24 +02:00
Rafał Miłecki
f98f83eada bcm53xx: backport DTS changes up to the first 4.15 queued commits
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-10-10 10:22:24 +02:00
Alexander Couzens
b73986a826
ramips/mt76x8: add initramfs support for tplink 841n v13
The tplink 841n v13 requires an tplink v2 image header in
front of an initramfs image.

To boot an initramfs image:
- break the uboot by holding the '4' key
- setup your tftp server 192.168.0.255
- tftp 81000000 lede-ramips-mt76x8-tl-wr841n-v13-initramfs-kernel.bin
- bootm

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-10-09 17:34:41 +02:00
Alexander Couzens
49b84624eb image-commands: tplink-v2-header: pass kernel loadaddr and entry
Initramfs images won't boot if the default loadaddr and entrypont is
different.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-10-09 16:10:05 +02:00
Alexandru Ardelean
a5d016f361 net: uqmi: fix blocking in endless loops when unplugging device
If you unplug a QMI device, the /dev/cdc-wdmX device
disappears but uqmi will continue to poll it endlessly.

Then, when you plug it back, you have 2 uqmi processes,
and that's bad, because 2 processes talking QMI to the
same device [and the same time] doesn't seem to work well.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-10-09 16:07:42 +02:00
Stijn Tintel
f8595a51d9 conntrack-tools: switch to git
There have been a number of interesting fixes in conntrack-tools since
the current latest release. Most notable is that this fixes IPv6
conntrack table syncing when cross-compiling conntrack-tools.

7e7748d src/main: refresh help message
fe32043 conntrackd.8: refresh file
47a4dda conntrackd.8: add reference to systemd
0cfe7ff doc/manual: include some bits about init systems
74a418b conntrackd: cthelper: ftp: Set match offset/len for PORT mangling
d833bed conntrackd: cthelper: ftp: Fix debug print
dd4b5a1 conntrackd: cthelper: Add new mdns helper
498d698 Link nfct and helper modules with `-z lazy`
9e94e85 sync-mode: print errno message on failure
ab81c35 log: print messages to stdout/sderr if running in console mode
631d92b log: introduce a mechanism to know if log was initialized
ccb1c8b conntrackd: replace error reporting in the config parser with dlog()
bee121e conntrackd: replace fprintf calls with dlog()
5a51b04 conntrack-tools: update Arturo Borrero Gonzalez email address
abb9984 helper: remove copy and paste from uapi kernel header
a91a004 src: add log message when resync is requested by other node
c2d8be1 systemd: fix missing log.h include
f6ca216 config: drop old/obsolete/deprecated conntrackd.conf config options
8b83771 conntrack: send mark filter to kernel iff set
1ba5e76 conntrackd: cthelper: Don't leak nat_tuple
832166d conntrackd: cthelper: Free pktb after use
ff843bc conntrackd: config: Do not strdup() tokens
b61c454 conntrackd: cthelper: ssdp: Track UPnP eventing
8ea394e conntrackd: Remove obsolete rule to catch ambiguous Checksum option
39398cd conntrackd: CommitTimeout breaks DisableExternalCache set On
29b390a conntrack: Support IPv6 NAT
381827a conntrackd: factorice tx_queue functions
131df89 conntrackd: factorize resync operations
d31bacc conntrackd: consolidate more code to use resync_send()
3d98496 conntrackd: request resync at startup
ef410bf conntrackd: remove use of HAVE_INET_PTON_IPV6
9d38445 conntrackd: evaluate configuration earlier
6feded7 conntrackd: cleanup if failed forking
dbfdea7 conntrackd: deprecate unix backlog configuration
210f542 conntrackd: make the daemon run in RT mode by default
37cc7f0 conntrackd: remove warning for -S
d2849d1 conntrack: Show multiple CPUs stats from proc
bc0b49a conntrackd: cthelper: ssdp: fix build with musl
0c77a25 tests: don't fail on modprobe since the driver might be built-in
eefe649 conntrack.8: refresh manpage

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-09 16:15:14 +03:00
Stijn Tintel
7695f144eb libnetfilter_conntrack: switch to git
In order to build conntrack-tools from git, a newer version of
libnetfilter_conntrack is required. As 1.0.6 is currently the latest
release, switch to git.

b0a7cf7 include: expose a copy of nf_conntrack_common.h
f68f7b3 conntrack: fix missing break in setobjopt_undo_dnat()
79dac5a conntrack: revert getobjopt_is_nat() condition
b266523 libnetfilter_conntrack: bump version to 1.0.7
e870432 labels: don't crash on NULL labelmap

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-09 16:12:00 +03:00
Stijn Tintel
bcfc39b763 libnetfilter_queue: bump to git HEAD
b39cac7 src: Correct typo in the location of internal.h in #include
58cb066 src: Declare the define visibility attribute together
e84b559 Revert "src: Declare the define visibility attribute together"
003c2b1 examples: set dummy connmark value to show use of NFQA_CT nested attribute
63973da doc: extend the doxygen section about NFQA_CFG_F_GSO
d7f74c7 build: bump version to 1.0.3
3f9eb57 build: bump library release version too
601abd1 doc: Add information about retrieving UID/GID/SECCTX fields

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-09 16:06:06 +03:00
John Crispin
c972779e98 mediatek: fix a sleep while atomic bug inside the ethernet driver
this sometimes happens when we have hw nat enabled.

Signed-off-by: John Crispin <john@phrozen.org>
2017-10-09 11:29:01 +02:00
Stijn Tintel
9e9696afc8 treewide: switch git.netfilter.org to HTTPS
As git.netfilter.org seems to support HTTPS, use that instead of HTTP
which is insecure, or GIT which is blocked on many corporate networks.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 21:10:36 +03:00
Stijn Tintel
6b533fd4bc ipset-dns: bump to git HEAD
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 20:51:03 +03:00
Stijn Tintel
f12c42940d kernel: bump 4.9 to 4.9.54
Refresh patches.
Remove upstreamed patches:
- ramips/0067-enable-mt7621-xhci.patch
- ramips/0085-pinmux-util.patch
- ramips/301-fix-rt3883.patch

Compile-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64.
Runtime-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 20:51:03 +03:00
Kevin Darbyshire-Bryant
e77fa68f1f kernel: bump 4.4 to 4.4.91
Refresh patches.

Compile-tested for: ar71xx Archer C7 v2
Run-tested on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-10-08 20:51:03 +03:00
Daniel Golle
34b153d7ad sunxi: build image for the NanoPi NEO
The NanoPi NEO is a small Allwinner H3 based board available with
different DRAM configurations.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Daniel Golle
333f90347e sunxi: kernel: add patches for NanoPi NEO
Enable dwmac-sun8i Ethernet core to use the built-in FastEthernet port.
Enable exposed UART, USB and I2C pins.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Daniel Golle
b80f6a5876 uboot-sunxi: build for NanoPi NEO
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Stijn Tintel
d2fdece2e1 layerscape: refresh patches
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 16:34:37 +03:00
Stijn Tintel
239dff6697 kernel: update and refresh patches
The lantiq patch 0028-NET-lantiq-various-etop-fixes.patch and sunxi
patch 0051-stmmac-form-4-11.patch no longer applied after applying the
the "generalize napi_complete_done()" patch.
Update them so they apply, and refresh patches while at it.

Fixes: 9aeb7ce8dc ("generic: net: generalize napi_complete_done")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 16:31:58 +03:00
Pavel Kubelun
9aeb7ce8dc generic: net: generalize napi_complete_done
Backport upstream commit that improves ethernet performance by a
small amount.

Compile and run tested on ipq8065.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-10-08 15:19:07 +03:00
Pavel Kubelun
b2ea46fe23 generic: net: tcp: backport tcp tx performance patches
An overall throughput gain of 22 % for heavy TCP use over a single TX queue.

Original patchset comment
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v4.13&id=3f4888adae7c1619b990d98a9b967536f71822b8

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-10-08 15:19:07 +03:00
Stijn Tintel
3a69ad3b2a kernel: split 82574L patch into multiple files
When refreshing patches that cointain multiple patches including headers
in a single file, quilt will remove the headers from all but the first
patch. This makes it difficult to review commits that refresh patches.
Next to that, if only a few of the patch series are accepted in -stable,
the patch needs to be manually modified. With each patch in a separate
file, it's just a matter of git rm.

Refresh patches while at it.

Patchwork links:
[1/5] https://patchwork.kernel.org/patch/9857487/
[2/5] https://patchwork.kernel.org/patch/9857489/
[3/5] https://patchwork.kernel.org/patch/9857495/
[4/5] https://patchwork.kernel.org/patch/9857491/
[5/5] https://patchwork.kernel.org/patch/9857493/

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 15:18:34 +03:00
Hauke Mehrtens
cf17e034bc kernel: Add some more generic config options
These options are deactivating some kernel modules for IP blocks not
uses on this SoC. I saw the same when working with the ARM64 Marvell
board so it is better to move them to generic.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-08 13:39:44 +02:00
Hauke Mehrtens
2135125182 layerscape: remove wifi config
This is provided by the mac80211 package

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-08 13:39:44 +02:00
Hauke Mehrtens
29a6c4fcfb kernel: add missing config options for layerscape target
This fixes some problems found by build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-08 13:39:44 +02:00
Andrey Jr. Melnikov
2cb8f0a4cf ar71xx: Fix NULL pointer dereferece in at803x_link_change_notify()
Check pdata pointer before use to avoid OOPS if dev_get_platdata() return
NULL.

Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com>
2017-10-07 23:19:15 +02:00
Yangbo Lu
9c9f7b0434 layerscape: select sdk dts for ls1043ardb/ls1046ardb
ls1043ardb/ls1046ardb should use sdk dts. This patch is
to fix this.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:23 +02:00
Yangbo Lu
c0b089da8a layerscape: fix CPU_TYPE for armv8_32b targets
Layerscape uses Cortex-A53 or Cortex-A72 CPU. It's proper
to set below CPU_TYPE for 32-bit mode.
CPU_TYPE:=cortex-a15
CPU_SUBTYPE:=neon-vfpv4

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:23 +02:00
Yangbo Lu
8fdda1cc10 layerscape: add linux 4.9 support
This patch is to add linux 4.9 support for layerscape.
All these kernel patches are from NXP LSDK 1709 release.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:23 +02:00
Yangbo Lu
19951bbf57 layerscape: drop linux 4.4 support
This patch is to drop linux 4.4 for layerscape.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
e3f47958dd layerscape: make uImage with zImage for 32-bit kernel
uImage should be made with zImage. This patch is to support
making uImage with zImage.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
a5ad3a2c80 layerscape: update memory layout according to LSDK
The uniform memory layout of NOR/QSPI/NAND/SD media on all Layerscape platforms:
+-----------------------------+---------|--------------|-----------------+
|Firmwre Definition           | MaxSize | Flash Offset | SD Start Block #|
|-----------------------------|---------|--------------|-----------------|
|RCW+PBI                      | 1MB     | 0x00000000   | 0x00008         |
|-----------------------------|---------|--------------|-----------------|
|Boot firmware(U-Boot,UEFI)   | 2MB     | 0x00100000   | 0x00800         |
|-----------------------------|---------|--------------|-----------------|
|Boot firmware Environment    | 1MB     | 0x00300000   | 0x01800         |
|-----------------------------|---------|--------------|-----------------|
|PPA firmware                 | 2MB     | 0x00400000   | 0x02000         |
|-----------------------------|---------|--------------|-----------------|
|Secure boot headers          | 3MB     | 0x00600000   | 0x03000         |
|-----------------------------|---------|--------------|-----------------|
|DPAA1 FMAN ucode             | 256KB   | 0x00900000   | 0x04800         |
|-----------------------------|---------|--------------|-----------------|
|QE/uQE firmware              | 256KB   | 0x00940000   | 0x04A00         |
|-----------------------------|---------|--------------|-----------------|
|Ethernet PHY firmware        | 256KB   | 0x00980000   | 0x04C00         |
|-----------------------------|---------|--------------|-----------------|
|Scripts                      | 256KB   | 0x009C0000   | 0x04E00         |
|-----------------------------|---------|--------------|-----------------|
|DPAA2 MC firmware            | 3MB     | 0x00A00000   | 0x05000         |
|-----------------------------|---------|--------------|-----------------|
|DPAA2 DPL                    | 1MB     | 0x00D00000   | 0x06800         |
|-----------------------------|---------|--------------|-----------------|
|DPAA2 DPC                    | 1MB     | 0x00E00000   | 0x07000         |
|-----------------------------|---------|--------------|-----------------|
|Device tree(needed by uefi)  | 1MB     | 0x00F00000   | 0x07800         |
|-------------+---------------|---------|--------------|-----------------|
|Kernel       |               | 16MB    | 0x01000000   | 0x08000         |
|-------------| kernel.itb    |---------|--------------|-----------------|
|Ramdisk rfs  |               |32MB     | 0x01100000   | 0x08800         |
+-------------+---------------+---------|--------------|-----------------+

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
2e2203ff72 layerscape: update packages with LSDK git trees
NXP Layerscape LSDK had set up its own open source web site
and github for release.

https://lsdk.github.io
https://github.com/qoriq-open-source

This patch is to update rcw/fman_ucode/u-boot packages with LSDK
git trees. Also add some patches of packages to support LEDE.
Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images
but 64-bit toolchain couldn't be used for 32-bit targets, we still
use a private tree for ARMv8 32-bit u-boot images. This is in plan
to move this private tree to NXP Layerscape github.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
806624add5 layerscape: rename subtargets and update makefile files
Rename subtargets 32b/64b with armv8_32b/armv8_64b which are
more proper, and update makefile files. There also will be other
subtargets added in the future, like armv7.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
4c89f2fcf8 layerscape: take over maintainership
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Philip Prindeville
a0c05a7c94 kernel: fix receiver overflow for 82574L under load
Under heavy load it's possible to overrun the 82574L. When this
happens, Other Interrupt happens and that's erroneously interpreted
as a Link Status Change.

    http://patchwork.ozlabs.org/patch/792260/

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-10-07 23:10:39 +02:00
Mathias Kresin
1c4a116a30 ar71xx: add rssileds to WA850RE v1 image
A default rssileds config exists for the TP-Link WA850RE v1 but the
rssiled package is not included by default.

The compressed 17.01.3 image size increases by 3302 bytes which should
be tolerable even for a 4MB flash board.

Fixes: FS#1043

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-07 20:15:03 +02:00
Mathias Kresin
d65b1c815a lantiq: drop phy id specfic compatible string
With kernel commit 7630ea4bda18 ("Documentation: net: phy: improve
explanation when to specify the PHY ID") the purpose of using phy id
specific compatibles was clarified.

Remove the phy id specific compatibles since they are meant to be used
if the phy reports an incorrect or no phy id at all.

Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-07 20:15:03 +02:00
Mathias Kresin
a6bd7255ab lantiq: remove gen_nand compatible string
The generic nand driver fails to load with:

  gen_nand 14000000.nand-parts: platform_nand_data is missing
  gen_nand: probe of 14000000.nand-parts failed with error -22

and the xway-nand driver is used afterwards.

Drop the gen_nand compatible to get rid of the error message.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-07 20:15:03 +02:00
Stijn Tintel
f625df7ab8 kernel: update 4.9 to 4.9.53
Refresh patches.
Compile-tested on brcm2708/bcm2708, octeon and x86/64.
Runtime-tested on brcm2708/bcm2708, octeon and x86/64.

Fixes the following CVEs:
- CVE-2017-1000252
- CVE-2017-12153
- CVE-2017-12154

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-07 20:53:21 +03:00
Kevin Darbyshire-Bryant
ae2a8a3b9b kernel: update 4.4 to 4.4.90
No patch refresh required.

Compile & run tested: ar71xx Archer C7 v2

Fixes the following CVEs:
- CVE-2017-1000252
- CVE-2017-12153
- CVE-2017-12154

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
[reference fixed CVEs]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-07 20:53:21 +03:00
Hans Dedecker
778970735b curl: add nghttp2 support
Add config option support for nghttp2

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-10-07 19:17:44 +02:00
Hans Dedecker
0e265dc0c7 nghttp2: add libnghttp2 package
The nghttp2 library is an implementation of the Hypertext Transfer
Protocol version 2 in C; it supports RFC7540 and RFC7541.
The package enables only the reusable C library; binary size is 130K (X86)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-10-07 19:17:44 +02:00
Thibaut VARENE
2be307c998 rbcfg: Implement CPU frequency control
This patch implements CPU frequency control as found on several
routerboard devices.

Supported SoCs:
- QCA953X
- AR9344

Tested on hAP lite and mAP lite (QCA953x): steps of 50MHz
Tested on LHG 5 (AR9344): steps of 50MHz

On unsupported hardware, this patch is a NOP: it will not alter the
new field.
"rbcfg help" will display an empty "cpu_freq" help listing.
"rbcfg show" will not show the cpu_freq field.
"rbcfg set/get cpu_freq" will return an error code.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
[adjusted subject]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-10-07 15:00:26 +02:00
Catrinel Catrinescu
b9c31c44d7 ar71xx: update LED definitions for embedded wireless dorin
Evaluation board 2.2 uses a different status LED pin
The other removed LEDs were never present

Signed-off-by: Catrinel Catrinescu <cc@80211.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-10-07 09:20:41 +02:00