Commit graph

153 commits

Author SHA1 Message Date
Imre Kaloz
d738d22bf8 add support for the Linksys E1700
SVN-Revision: 43186
2014-11-05 14:37:13 +00:00
John Crispin
b25b58a96a ralink: add pci bidge node to mt7620a dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43172
2014-11-03 20:20:46 +00:00
John Crispin
cc142739f2 ralink: fix wan port on whr-1166
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43171
2014-11-03 20:20:40 +00:00
John Crispin
cc5194cf03 ramips: add support for Airlink101 AR670W
This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader
is a hacked u-Boot that reads an LZMA image directly, so we skip
generating the uImage header and enable the lzma mtdsplit parser.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43153
2014-11-03 08:00:13 +00:00
John Crispin
d0bf15f235 ramips: add support for A5-V11 board (resubmit)
(Reposted due to an issue with the patchwork server during original submission)

Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)

Signed-off-by: Gareth Bryan <gareth@mx9.org>

SVN-Revision: 43102
2014-10-29 11:01:17 +00:00
John Crispin
7bac455a4c ramips: add support for Nexx WT3020 devices
SVN-Revision: 42983
2014-10-20 06:28:48 +00:00
Felix Fietkau
35e9d448f2 ramips: fix usercfg partition offset for WHR-1166D
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42958
2014-10-19 08:45:56 +00:00
John Crispin
06a849575d ralink: Build 8M image for 7Links PX-4885
7Links PX-4885 (clones) can also be purchased with 8MB flash.
Creating images for these routers, use dtsi for common part

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42892
2014-10-13 19:41:36 +00:00
John Crispin
af1207b58c ramips: add support for Nexx WT1520
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 42867
2014-10-10 08:56:43 +00:00
John Crispin
d76b7e0221 ramips: D-Link DIR-810L: make led naming consistent with other boards
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42789
2014-10-06 04:52:36 +00:00
John Crispin
b04bb3eea7 ramips: Support for RAMIPS based Tripmate HT-TM02 board
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

SVN-Revision: 42785
2014-10-06 04:52:07 +00:00
John Crispin
d4cc995c53 ramips: D-Link DIR-810L. Add support for SoC 2.4 GHz wireless and fix leds naming
SVN-Revision: 42619
2014-09-19 11:07:08 +00:00
John Crispin
d1f8b9bd76 ralink: DIR-645 picks up incorrect MAC address in DTS file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42321
2014-08-28 09:19:56 +00:00
John Crispin
0c14bea523 ralink: the mt7620 evb has a usb port
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42293
2014-08-25 16:31:13 +00:00
John Crispin
fdc41e2fd7 ramips: enable second SPI for VoCore
This patch enables the second SPI as spidev and also fixes some typos.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42277
2014-08-25 06:35:46 +00:00
John Crispin
a3fd3dc796 ramips: second spi device on rt5350
This is based on Jon Smirl's patch with the following changes:
- Set CS polarity as low by default.
- Add support for changing CS polarity.
- Add support for changing LSB/MSB.
- Add support for changing SPI mode.
- Fix indentations.

I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42276
2014-08-25 06:35:42 +00:00
John Crispin
e9e519a147 ramips: fix OMNI-PLUG.dts
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42232
2014-08-21 06:41:27 +00:00
John Crispin
d04cab8dfc ramips: Add support for Omnima MiniPlug
This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash

Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk>

SVN-Revision: 42200
2014-08-18 16:06:48 +00:00
John Crispin
bb9a23aca2 ramips: Hame: change LED name mpr-x -> hame
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42190
2014-08-18 13:09:39 +00:00
John Crispin
f80312613d ramips: enable additional GPIOs on HAME MPR-A1
According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose
6 unused GPIOs, only one of them working as configured in the current
DTS. This patch enables GPIO22-26.

Tested on hardware.

[1] http://i.imgur.com/kHVW2Ox.jpg
[2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 42178
2014-08-18 13:08:48 +00:00
John Crispin
997ca19fd2 ralink: revert r37163
https://dev.openwrt.org/ticket/17071

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42036
2014-08-07 12:38:20 +00:00
John Crispin
04e4ff282a ramips:support Lenovo AC1200 Wireless router
Lenovo AC1200 series has two types, Y1 and Y1S.
Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port.

Signed-off-by: Lintel <lintel.huang@gmail.com>

SVN-Revision: 41961
2014-08-03 11:13:52 +00:00
John Crispin
21845cb45d ramips: Add support for VoCore
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41939
2014-08-01 20:51:24 +00:00
John Crispin
7d9bac5247 ramips: Add support for SPI_CS1 pinmux
This patch adds support for setting SPI_CS1 as Chip Select, Watchdog reset output and GPIO#27.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41938
2014-08-01 20:51:14 +00:00
John Crispin
9efd7ebd34 ramips: add support for easyacc wizard8800
Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de>

SVN-Revision: 41936
2014-08-01 11:19:50 +00:00
John Crispin
6fb04ff871 ramips: correct typo ubsphy -> usbphy
This appears to be a typo.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41859
2014-07-28 15:26:36 +00:00
John Crispin
6f6dc62ca2 ramips: fix mode switch gpio for AsiaRF AWM eval board
Fix a typo: gpio 21 is already used for the WPS led.  Gpio 20 is the
right one (tested) for the mode switch.  Confirmed that
/sys/kernel/debug/gpio state followed the position of the switch.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41858
2014-07-28 15:26:32 +00:00
John Crispin
636f2b83e6 ramips: add ethernet macaddr to dts for AWM003-EVB
Follows the pattern of http://patchwork.openwrt.org/patch/5970/

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41857
2014-07-28 15:26:23 +00:00
John Crispin
5b4abf87d7 ramips: add support for Kingston MLW221
This patch adds support for the Kingston Mobilelite Wireless (MLW-221)

http://wiki.openwrt.org/toh/kingston/mlw221

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 41841
2014-07-26 20:36:22 +00:00
John Crispin
b77e92e020 ramips: ethernet mac cleanup
Compile tested all subtargets and profiles.
Unfortunately I don't own any board affected by these changes, so no run tests.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41839
2014-07-26 20:36:09 +00:00
John Crispin
0b5b8de818 ramips: fix gpio mapping on MZK-750DHP
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41811
2014-07-23 07:49:54 +00:00
John Crispin
2c356c4bb7 ramips: add a profile for AWM003
same as AWM002 but with 64mb RAM

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41797
2014-07-22 09:58:21 +00:00
John Crispin
4d22954db0 ramips: fix mac address partitions on ASL-26555
ASL-26555 16MB: caldata is present on uboot-env and devdata, but the proper one seems to be the devdata, since mac address corresponds to Amper, the real manufacturer, meanwhile the caldata on  uboot-env corresponds to D-Link.
ASL-26555 8MB: caldata is only present on uboot-env, but its mac address corresponds to Alpha, the real manufacturer.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41768
2014-07-20 17:30:28 +00:00
John Crispin
f44d3f9980 ramips: soc wmac eeprom cleanup
Move eeprom extraction from scripts to dts files.
Additionally there are few other changes like:
- whitespace fixes
- add partition labels where needed
- BR6524N board doesn't exist (lost in translation?)
- fix Edimax 3g-6200nl model
- add wmac eeprom to dts for Asus RT-N14U board

Compile tested all subtargets and their profiles.
Run tested on:
- Asus RT-N15
- Asus RT-N14U
- Buffalo WHR-600D
- Argus ATP52B
- Sparklan WCR-150GN

Few problems noted:
- many boards didn't have wmac eeprom information defined at all
- several boards don't have any patitions defined (see FIXME comments in dts)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41680
2014-07-17 10:55:31 +00:00
John Crispin
74db9511dc ramips: basic support for Planex MZK-750DHP
some gpios are still missing.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41654
2014-07-14 17:10:39 +00:00
John Crispin
76ba6846a2 ramips: fix port mapping and extract wmac eeprom on ZBT-WA05 board
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41634
2014-07-14 07:38:32 +00:00
John Crispin
8c577d9fde ramips: extract mac address from flash on WHR-600D board
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41633
2014-07-14 07:38:28 +00:00
John Crispin
ba3988fb16 ramips: add support for WR8305RT board
Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41584
2014-07-12 06:54:03 +00:00
John Crispin
03faf4618e ramips: add support for Zbtlink WA05 router
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41579
2014-07-10 22:02:28 +00:00
John Crispin
bbfb3baaed ramips: add missing rt3352 usb phy node to dts
Signed-off-by: michael <igvtee@gmail.com>

SVN-Revision: 41476
2014-07-02 16:37:30 +00:00
John Crispin
62287e589d ramips: fix target rt5350 only have 28 gpios
Signed-off-by: michael <igvtee@gmail.com>

SVN-Revision: 41475
2014-07-02 16:37:26 +00:00
John Crispin
3d81a4ef82 ralink: add Wansview NCS601W IP Camera
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41453
2014-07-02 07:42:44 +00:00
John Crispin
4ddc0f9ff3 ramips: add WHR-1166 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41447
2014-07-01 10:26:42 +00:00
John Crispin
3c88de0d47 ramips: sync the WHR-600D flash layout with that of the vendor FW
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41446
2014-07-01 10:26:38 +00:00
John Crispin
2e8c6e4128 ramips: add wmac to mt7620a device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41445
2014-07-01 10:26:33 +00:00
John Crispin
5f6e7e1f44 ramips: add wmac to mt7620n device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41444
2014-07-01 10:26:30 +00:00
John Crispin
975728813a ralink: fix up WRTNode vs WRTNODE in the dts file
https://dev.openwrt.org/ticket/16899

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41343
2014-06-26 11:43:26 +00:00
John Crispin
dc5fe5f73f ramips: RT-N56U support fixes and factory image creation
Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com>

SVN-Revision: 41224
2014-06-16 18:57:20 +00:00
John Crispin
4d7ed2a8a0 ramips: fixes XDXRN502J reset button
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41217
2014-06-16 18:54:53 +00:00
John Crispin
6d213a644d ramips: add asiarf awapn2403 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41177
2014-06-13 09:16:15 +00:00