Commit graph

71 commits

Author SHA1 Message Date
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Hauke Mehrtens
5b388e5716 brcm47xx: b44: some fixes in combination with the switch
Let the switch start the carrier and set the duplex mode independently
if this nic is up of not.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39733
2014-02-23 18:51:56 +00:00
Hauke Mehrtens
f587bacc26 brcm47xx: b44: start the phy
We did not start the PHY when an external phy was in use. Without this
patch the driver uses half duplex mode and the switch uses full duplex
mode, which causes problems.
Thank you fback for spotting this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39719
2014-02-23 16:58:12 +00:00
Hauke Mehrtens
15a7efa119 brcm47xx: fix detection of some Linksys WRT54G* devices
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39718
2014-02-23 15:57:37 +00:00
Hauke Mehrtens
2ad7e55a89 brcm47xx: new patch adding arch workarounds.c
It was recently sent to linux-mips for comments. It adds workaround for
WNR3500L to enable USB port.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 39469
2014-02-04 23:32:01 +00:00
Hauke Mehrtens
14113eb88f brcm47xx: use upstream patch removing WGT634U code
It does the same, it just reorders things

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 39468
2014-02-04 23:30:38 +00:00
Hauke Mehrtens
db73f1433b brcm47xx: move OpenWrt arch patches a bit further
This allows picking more upstreamed stuff

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 39467
2014-02-04 23:25:17 +00:00
Hauke Mehrtens
7ae5ff92ae kernel: ssb: update ssb to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39464
2014-02-04 22:54:29 +00:00
Hauke Mehrtens
e0d4a548fb kernel: bcma: update bcma to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39463
2014-02-04 22:53:52 +00:00
Gabor Juhos
a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Hauke Mehrtens
c2992ee273 brcm47xx: add new led and button support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39252
2014-01-12 18:55:25 +00:00
Hauke Mehrtens
30cf6f5815 brcm47xx: update some patches to versions in linux mainline
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39251
2014-01-12 18:54:38 +00:00
Hauke Mehrtens
7d654de038 brcm74xx: fix patch for BCM4706 CPUs
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39250
2014-01-12 18:51:45 +00:00
Hauke Mehrtens
e585841044 brcm47xx: update mtd drivers
This backports some patches from linux upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39249
2014-01-12 18:50:45 +00:00
Hauke Mehrtens
8c085f647b brcm47xx: fix cpu wait for BCM4706
This was called to early.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39167
2013-12-26 23:30:10 +00:00
Hauke Mehrtens
961d5b4453 brcm47xx: b44: This updates the phylib patches to the version send upstream
This uses a fixed phy instead of a dummy one.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39166
2013-12-26 23:27:52 +00:00
Hauke Mehrtens
36197755dc brcm47xx: deactivate early printk support
This breaks some devices where the serial console is not at port 0 but
somewhere else.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39060
2013-12-15 19:19:16 +00:00
Hauke Mehrtens
94f7ae90f8 brcm47xx: misc cleanups
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38980
2013-12-01 18:12:57 +00:00
Hauke Mehrtens
c48f285147 brcm47xx: deactivate mips wait instruction only for BCM4706
The wait instruction is only broken on the BCM4706 and not on the other
similar SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38979
2013-12-01 18:05:08 +00:00
Hauke Mehrtens
3fb7e8b851 brcm47xx: add vectored interrupts
This adds support for vectored interrupts in this SoC.
This is supported by the 74K cpus.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38975
2013-12-01 16:37:58 +00:00
Hauke Mehrtens
25ca004f24 brcm47xx: add cpu overwrites
bcm47xx misses cpu overwrites for the features of the CPUs used in
these SoCs.
Instead of manually checking, it is now known at compile time for some
options and the compiler is able to remove the checks and optimize the
code.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38974
2013-12-01 16:36:38 +00:00
Hauke Mehrtens
d7ebbd0ac7 brcm47xx: use "firmware" partition name
Some time ago, after switching to the mainline bcm47xxpart driver
following patch has been applied:

commit 03cef8725d2062335ffc3de50fc037b294fd458c
Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date:   Sat Apr 6 22:22:26 2013 +0000

    brcm47xx: use old partition names again for kernel 3.8

    This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

    Thank you russell for spotting this problem.

I propose to revert this change and make sysupgrade use "firmware"
instead. This makes brcm47xx compatible with widely used ar71xx and
after all "firmware" sounds like a much better name for... the firmware.

This change doesn't affect "sysupgrade" usage, because it never takes a
partition name as a parameter. This change only affects users using mtd
tool directly. Hopefully there are not many howtos using "mtd" command.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 38973
2013-12-01 16:32:32 +00:00
Hauke Mehrtens
4abd860ab2 brcm47xx: swap also early boot console if necessary.
Some devices are using tty1 as the default console, also swap the early
boot console in such case. This is needed for the WGT634U.

Thank you Russell for reporting this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38794
2013-11-13 18:38:18 +00:00
Hauke Mehrtens
e8d0b52496 linux/brcm47xx : Belkin F7Dx30x board detection
boardnum is unstable, so allow using NULL to make it unchecked.

A method for differentiating F7D3301 from F7D3302 using nvram is
unknown at this point. Reading the first 32bits of magic from the
"linux" mtd partition would do the trick, but these 2 are similar
enough that we don't need separate led/button definitions. Not knowing
which one you have is only a usability issue for upgrading the device:
they expect different magic numbers for their trx images.

Signed-off-by: Cody P Schafer <devel@codyps.com>

SVN-Revision: 38767
2013-11-11 23:04:00 +00:00
Hauke Mehrtens
091e3fde4c brcm47xx: b44: fix logic in BUG_ON()
It is a problem when phydev is not set at this position and not the other way around.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38744
2013-11-11 21:23:29 +00:00
Hauke Mehrtens
874650d235 brcm47xx: add detection for Linksys WRT54GS V1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38700
2013-11-09 20:08:09 +00:00
Hauke Mehrtens
68081fc1c8 brcm47xx: register ADM6996L switch
This patch makes it possible to use adm6996.c on first generation
BCM47XX devices with ADM switches.

This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for
the device.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38699
2013-11-09 19:29:46 +00:00
Hauke Mehrtens
73ed236907 brcm47xx: fix detection of Asus RT-N12B1 and Netgear WNR3500L
This closes #14367 and #14328.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38656
2013-11-05 17:09:19 +00:00
Hauke Mehrtens
40790e6b84 brcm47xx: b44: fix error handling for dummy phy creation
When the mdio bus is unregistered the newly created phy will also be
unregistered and freed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38539
2013-10-25 21:12:48 +00:00
Hauke Mehrtens
c185d48b7c brcm47xx: b44: add dummy phy device if we do not find any
On some devices with e.g. a BCM2535F switch the second MAC is used, but
we can not find a phy under all addresses between 0 and 31, 0xffffffff
is returned as phy id. If we can not find a phy at the expected address
create a dummy one.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38538
2013-10-25 21:02:13 +00:00
Hauke Mehrtens
6d2136c3f2 brcm47xx: b44: detect external phy by bit set in DevControl register
Without this patch we treated only phy addr 30 as an external phy, but
there is a register to check that. Now we do not have to try to reset
the switch to check for an external switch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38502
2013-10-22 21:01:35 +00:00
Hauke Mehrtens
551a250e58 brcm47xx: fix detection of some boards
This adds some more boards.

This fixes parts of #14316 and #14133.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38383
2013-10-13 19:27:24 +00:00
Hauke Mehrtens
64c2bc256c brcm47xx: Cocci spatch "noderef"
sizeof when applied to a pointer typed expression gives the size of the
pointer.
Found by coccinelle spatch "misc/noderef.cocci"

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>

SVN-Revision: 38312
2013-10-07 00:01:01 +00:00
Hauke Mehrtens
2402f8a9ee brcm47xx: move clock detection patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38311
2013-10-07 00:00:10 +00:00
Hauke Mehrtens
4c193a30ce brcm47xx: move and rename nvram gpio patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38310
2013-10-06 23:57:11 +00:00
Hauke Mehrtens
b201818044 brcm47xx: update early printk patches
Early printk was disabled because it caused hangs on some devices, the
old patches were using the CFE console now we use the normal serial
console, it is at a constant address.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38309
2013-10-06 23:55:35 +00:00
Hauke Mehrtens
ebf0778721 brcm47xx: update board detection patches
Add patches like they are currently in the mainline mips tree and add
some more pending patches for board detection.

* Now the board name is shown under machine in /proc/cpuinfo.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38308
2013-10-06 23:51:24 +00:00
Hauke Mehrtens
2c5e4aa6ad brcm47xx: b44: fix some problems with the phy
* do not try initialize a unused phy
* some improvements to the phylib patch
* do not turn the phy off when mac is off

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38306
2013-10-06 18:31:32 +00:00
Hauke Mehrtens
125fc703bb kernel: bgmac: move other bgmac patches to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38289
2013-10-02 22:25:26 +00:00
Hauke Mehrtens
06c8b90ebf kernel: bgmac: move bgmac patches already applied in mainline kernel to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target.
These are only the patches already applied in current net-next/master
branch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38288
2013-10-02 22:24:01 +00:00
Hauke Mehrtens
86f7ca96af brcm47xx: b44: bgmac: some small changes to the phylib patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38044
2013-09-18 16:49:52 +00:00
Hauke Mehrtens
4f93bde681 brcm47xx: bgmac: b44: add support for Byte Queue Limits
This adds support for Byte Queue Limits in bgmac and b44, now it is
possible to use more advanced network queue control algorithms.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38038
2013-09-18 15:19:25 +00:00
Hauke Mehrtens
6dd2e9ae2c brcm47xx: update the clock fixes for BCM5354
This updates the patches for BCM5354 to the version send for upstream
Linux inclusion.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38037
2013-09-18 14:36:03 +00:00
Hauke Mehrtens
4c52ed50d7 brcm47xx: update board detection patches
This is now the version which was send for mainline Linux kernel
inclusion. The data needed to detection a board is now stored in init
data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38036
2013-09-18 14:33:54 +00:00
Hauke Mehrtens
e75ff873be brcm47xx: add detection for Linksys E900 V1
Thank you Rafał for the data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38035
2013-09-18 14:32:05 +00:00
Hauke Mehrtens
c78e4fb220 brcm47xx: Add support for Huawei E970
This patch adds support for Huawei E970 wireless gateway devices.
It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV.
E960/B970 should work too, from what I know it's basically the same hardware.

The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem.

It uses a hardware watchdog which needs GPIO-7 to be toggled at least
every 1-2 seconds. This patch uses gpio_wdt module (see my previous
patch today) to take care of this.

Tested and works:  3G wan,  wlan+LED,  VLAN config,  failsafe using reset
button,   image to be used for upgrade from OEM firmware's web interface

Link to the wiki page I've created:  <http://wiki.openwrt.org/toh/huawei/e970>

Issue:

* lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog
  reset during kernel decompress.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>

SVN-Revision: 38011
2013-09-16 21:09:10 +00:00
Hauke Mehrtens
880be9ca2f brcm47xx: add detection for Phicomm M1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38009
2013-09-16 19:53:09 +00:00
Hauke Mehrtens
bc5b56f42b brcm47xx: detect Linksys E1200 V2
This adds detection for Linksys E1200 V2

Thank you Lightsword and Rafał.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38006
2013-09-16 19:49:02 +00:00
Hauke Mehrtens
23c34e820c brcm47xx: mtd: bcm47xxpart: detect "factory" partition
A new type of partition with magic FCTY was found on Huawei E970:
46 43 54 59 4b 51 37 4e  41 42 31 38 41 32 39 30  |FCTYKQ7NAB18A290|

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 38005
2013-09-16 19:47:30 +00:00
Hauke Mehrtens
f687ab2101 brcm47xx: bgmac: implement unaligned addressing for DMA rings that support it
This is important patch for new devices that support unaligned
addressing. That devices suffer from the backward-compatibility bug in
DMA engine. In theory we should be able to use old mechanism, but in
practice DMA address seems to be randomly copied into status register
when hardware reaches end of a ring. This breaks reading slot number
from status register and we can't use DMA anymore.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 38004
2013-09-16 19:46:34 +00:00