Commit graph

37197 commits

Author SHA1 Message Date
Roger Pueyo Centelles
c6d3a62919 gre: add different per-protocol prefixes to GRE-TAP IPv4/6 tunnel interfaces.
This commit modifies the /lib/netifd/proto/gre.sh script so that, when
GRE-TAP tunnels are created, either IPv4 or IPv6, the prefix before the chosen
interface name contains the "tap" substring, to differentiate them from non-TAP
GRE tunnels.

Right now, both GRE and GRE-TAP tunnel (either IPv4 or IPv6) interfaces defined
in /etc/config/network are named equally ("gre-"+$ifname or "grev6"+$ifname)
upon creation. For instance, the following tunnels:

        config interface 'tuna'
                option peeraddr '172.30.22.1'
                option proto 'gre'

        config interface 'tunb'
                option peeraddr '192.168.233.4'
                option proto 'gretap'

        config interface 'tunc'
                option peer6addr 'fdc5:7c9e:e93d:45af::1'
                option proto 'grev6'

        config interface 'tund'
                option peer6addr 'fdc0:6071:1348:31ff::2'
                option proto 'grev6tap'

are named, respectively, "gre-tuna", "gre-tunb", "grev6-tunc" and "grev6-tund".

The current change makes that each GRE tunnel interface of the four different
types available (gre, gretap, grev6 and grev6tap) gets a different prefix.
Therefore, the abovementioned tunnels will be named, respectively:
"gre4-tuna", "gre4t-tunb", "gre6-tunc" and "gre6t-tund".

This is coherent with other types of virtual interfaces (i.e. PPP, PPPoE, PPPoA)
where the whole protocol name is used. For instance, a PPPoA interface named
"p1" and a PPPoE interface named "p2" will respectively appear as "pppoa-p1"
and "pppoe-p2", not as "ppp-p1" and "ppp-p2").

Since Linux interfaces names are limited to 15 characters, these prefixes leave,
for the worst case (TAP tunnels), 9 characters for the actual name.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2017-01-03 14:36:37 +01:00
Alexandru Ardelean
15d8d9c271 build: drop trapret function from non-Linux HOST_TAR variant
Looks like this was meant to workaround some limitations with
non-GNU tar variants (like BSD-tar which are present on Mac os BSD hosts).

Though, I cannot find any use of that `+s` option that's mentioned
in the comment.

Last hash of this I found was 24faf55360

In my case, it now this fails for `python-setuptools` on Mac OS X (the host-build with):
```
trapret 2 tar -C <home-dir>/work/sources-work/lede/build_dir/target-i386_pentium4_musl-1.1.15/python-setuptools-27.2.0 --strip-components=1 -xzf <home-dir>/work/sources-work/lede/dl/setuptools-27.2.0.tar.gz
bash: trapret: command not found
```

So, I was thinking maybe it's time to remove this workaround (9 years later).
I could also fix the `python-setuptools` host build. If that's more preferred.

[ Btw, I just recently transitioned to a Mac machine for dev-ing,
  so a lot of (this Mac) stuff I'm finding out is new to me too. ]

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-01-03 14:32:35 +01:00
Luiz Angelo Daros de Luca
0bb474652e elfutils: bump to 0.168
Other changes:
- Project moved to sourceware.org
- musl patch where cleaned up and submitted upstream
- TEMP_FAILURE_RETRY macro fixed and submitted upstream

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[Jo-Philipp Wich: add missing .patch extension to 007-fix_TEMP_FAILURE_RETRY]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-03 14:32:35 +01:00
Brian J. Murrell
fc6b6f4583 download.pl: use curl in preference to wget
Because wget doesn't know how to do Negotiate authentication with a proxy
and curl does, use curl if it's present. The user is expected to have a
~/.curlrc that sets the options necessary for any proxy authentication.

A ~/.curlrc is completely optional however and curl will work in exactly
the same manner as wget without one.

Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
[Jo-Philipp Wich: Rework code to detect curl usability by checking --version,
                  Use vararg style open() to bypass the shell when downloading,
                  Use Text::ParseWords to decompose env vars into arguments]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-03 14:26:41 +01:00
Rosen Penev
558680012d curl: Remove PolarSSL and adjust default to mbedTLS
luci-ssl has already made the switch since mainline support for PolarSSL is
almost over (2016).

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-01-03 14:26:41 +01:00
Daniel Engberg
cd18ff9ed6 tools: gmp: Update to 6.1.2
Updates GMP to 6.1.2

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:33 +01:00
Daniel Engberg
0050b39fd4 gmp: Update to 6.1.2
Update GMP to 6.1.2

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:33 +01:00
Daniel Engberg
6099f22097 zlib: Update to 1.2.9
Update zlib to 1.2.9 and switch to XZ tarballs for download.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:33 +01:00
Daniel Engberg
bb4afdc8bc libusb: Update to 1.0.21
Update libusb to 1.0.21

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:33 +01:00
Daniel Engberg
54ff3b1def xz: Update to 5.2.3
Update xz to 5.2.3

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:32 +01:00
Florian Fainelli
1618c4abdb rpcd: Update to 2016-12-03
Brings in the following changes:

0577cfc1acdb cmake: Find libubox/blobmsg_json.h
26c98ec94d7a sys: Check return values of chdir and write
f4089654a399 cmake: Find libubus.h

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-02 21:06:14 +01:00
Florian Fainelli
9bf2bc7587 fstools: Update to 2016-12-04
Brings in the following changes:
84b530a732b1 libfstools: Check return values for fread and system

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-02 21:06:14 +01:00
Florian Fainelli
55209a9df9 uclient: Update to 2016-12-09
Brings in the following changes:

52d955fd802a remove obsolete mac os x /opt/local include/library search path
a4e49b4163b2 Fix unused results warnings
48cfff3fbec9 uclient-http: send correct "Host:" header if port is set

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-02 21:06:13 +01:00
John Crispin
91dab05918 ixp4xx: drop 3.18 config/patches
the default has been 4.4 for a while now

Signed-off-by: John Crispin <john@phrozen.org>
2017-01-02 21:06:13 +01:00
Mathias Kresin
8c822ec4ca uboot-lantiq: fix boot of images larger than 8MB
Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
support uncompressing images larger than 8 MB when using the bootm
command.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Mathias Kresin
cfe1c6debe uboot-lantiq: fix build with gcc6
Backport u-boot commit 9b2c282b348dfe966bbba967dc7a45ce817cce50 to fix
compile with gcc5 and gcc6.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Mathias Kresin
b35a41c139 generic: backport dwc2 kernel panic fix
In case the soft reset in dwc2_core_reset() timeouts, the
hsotg->core_params are freed albeit it is owned by the core. This
results into a kernel panic as shown in FS#351.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
L. D. Pinney
b28e94d4bf ramips: MiWiFi Nano fixes
Use the the dt-bindings macros and add the reset button.

Set the correct polarity for the LEDs and drop the default state.
Remove all trigger for the LEDs. According to the manual the LEDs are
only used to show the operation state, where blue means normal
operation.

Use the MAC-Addresses stored in EEPROM for the ethernet and the
wireless interface.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use leds only for boot status indication, add proper commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Alexis Green
fd718c5025 mac80211: Allow HT/VHT rates when running unencrypted mesh.
Signed-off-by: Alexis Green <agreen@cococorp.com>
2017-01-02 16:47:59 +01:00
Alberto Bursi
8496659eb4 base-files: fix message of initscript wrapper
currently (after blogic's edit to my commit) it prints like this:

root@lede:/# service aa
aa does not exist. the following services are available :adblock       dnsmasq       gpio_switch   rpcd          system
boot          done          led           sqm           uhttpd
crelay        dropbear      log           sysctl        umount
cron          firewall      network       sysfixtime    urandom_seed
ddns          fstab         odhcpd        sysntpd

which looks pretty bad, and is even worse if someone writes only "service" without arguments, as it will print " does not exist. " which is confusing.

with this commit it looks like this:

root@lede:/# service
service "" not found, the following services are available:
adblock       dnsmasq       gpio_switch   rpcd          system
boot          done          led           sqm           uhttpd
crelay        dropbear      log           sysctl        umount
cron          firewall      network       sysfixtime    urandom_seed
ddns          fstab         odhcpd        sysntpd

Yes there is some play with " and ', it is to display "name" or just "" if no service name is entered (like in the example).

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-02 16:47:59 +01:00
George Amanakis
5639e45614 generic: package Broadcom BNX2 driver
bnx2 driver support for the x86 architecture. Includes module and
firmware for Broadcom BCM5706/5708/5709/5716 ethernet adapters.

Signed-off-by: George Amanakis <g_amanakis@yahoo.com>
2017-01-02 16:47:59 +01:00
Hauke Mehrtens
321aca6661 oxnas: fix syntax in ox820-akitio.dts
This commit introduced a syntax error in ox820-akitio.dts which is
fixed now:
commit 5cde94d9ab
Author: Daniel Golle <daniel@makrotopia.org>
Date:   Sat Sep 24 01:14:53 2016 +0200
    oxnas: backport upstream NAND driver

This caused the folowing error message in the build bot:
Error: arch/arm/boot/dts/ox820-akitio.dts:146.3-147.1 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:293: recipe for target 'arch/arm/boot/dts/ox820-akitio.dtb' failed
make[5]: *** [arch/arm/boot/dts/ox820-akitio.dtb] Error 1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-02 13:34:57 +01:00
Hauke Mehrtens
1436e15488 curl: update to version 7.52.1
This fixes the folowing security problems:

CVE-2016-9586: printf floating point buffer overflow
CVE-2016-9952: Win CE schannel cert wildcard matches too much
CVE-2016-9953: Win CE schannel cert name out of buffer read
CVE-2016-9594: unititialized random

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-02 13:07:10 +01:00
Daniel Golle
3e2c60e476 oxnas: append metadata to sysupgrade image
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-01 10:08:04 +01:00
Daniel Golle
5cde94d9ab oxnas: backport upstream NAND driver
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-01 10:07:58 +01:00
Daniel Golle
ae21033e76 oxnas: drop support for kernel 4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-01 10:07:40 +01:00
Daniel Golle
1f7a3584e5 oxnas: switch to kernel 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-01 10:07:05 +01:00
Hannu Nyman
b7677f05d6 ustream-ssl: remove extra DEFAULT_VARIANT from libustream-polarssl
Currently both libustream-polarssl and libustream-mbedtls
variants define themselves as the DEFAULT_VARIANT

Remove extra DEFAULT_VARIANT from libustream-polarssl.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-12-30 17:38:39 +01:00
Magnus Kroken
39d3a4117b openvpn: update to 2.4.0
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2016-12-30 13:07:41 +01:00
Magnus Kroken
8ed11ebf7d mbedtls: enable DHE-RSA key exchange
Later OpenVPN 2.3-openssl versions only enable
TLS cipher suites with perfect forward secrecy, i.e. DHE and ECDHE
cipher suites. ECDHE key exchange is not supported by
OpenVPN 2.3-openssl, enable DHE key exchange to allow LEDE
OpenVPN 2.4-mbedtls clients to connect to such servers.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reported-by: Lucian Cristian <luci@createc.ro>
2016-12-30 13:06:43 +01:00
Magnus Kroken
ca963bbf5f mbedtls: enable secp384r1 elliptic curve support
Secp384r1 is the default curve for OpenVPN 2.4+. Enable this to
make OpenVPN-mbedtls clients able to perform ECDHE key exchange
with remote OpenVPN 2.4-openssl servers that use the default
OpenVPN curve.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2016-12-30 13:06:25 +01:00
Felix Fietkau
4731f02fa2 kirkwood: fix ubi partition name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-30 12:58:20 +01:00
Felix Fietkau
83d59453c0 kirkwood: fix sysupgrade for non-dockstar NAND devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-30 12:58:20 +01:00
Rafał Miłecki
8f5cf323c4 brcm47xx: drop standalone Netgear WGT634U profile
We have profile for this device thanks to DEVICE_PACKAGES now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
2016-12-30 09:23:07 +01:00
Rafał Miłecki
b1bdb6e5ea brcm47xx: specify DEVICE_PACKAGES for Netgear WGT634U
This allows using it nicely with PER_DEVICE_ROOTFS.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
2016-12-30 09:22:55 +01:00
Rafał Miłecki
c5ca3043d1 bcm53xx: drop unused source file of bcm53xxspiflash
We don't use this driver since commit 741715331a ("bcm53xx: switch to
m25p80 and drop bcm53xxspiflash").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-29 18:07:01 +01:00
Rafał Miłecki
ef4fc00c91 brcm47xx: mips74k: fix typo in Netgear WN3000RP model name
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-29 09:41:00 +01:00
Rafał Miłecki
939ef157da ramips: fix NixcoreX1 profiles
There was a typo in Makefile that prevented using these profiles.

Fixes: a75ce960ac ("ramips: use different board names for variants")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-28 23:05:24 +01:00
Felix Fietkau
ae37f2310b mbedtls: enable support for external private RSA keys to fix openvpn build issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-28 22:56:36 +01:00
Sven Roederer
19059d84a4 linux: correct deps for x86-xen-domu target
depending packages have been moved to kernel-config
- kmod-xen-kbddev in 9fde361
- kmod-xen-fs, kmod-xen-evtchn, kmod-xen-netdev in 018807d

this will also fix imagebuilder

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
2016-12-28 10:35:02 +01:00
Felix Fietkau
2fd5ce9488 libressl: disable shared libraries, fixes build issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-28 01:22:26 +01:00
Felix Fietkau
c9c68c7177 ath9k: fix issues with external reset on AR913x
An external reset patch for AR955x accidentally led to external reset
being issued twice on AR913x, once before the RTC reset and once after.
This may be causing some stability issues.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 20:55:35 +01:00
Felix Fietkau
6b524fe5b8 relayd: fix expiry time handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 13:21:42 +01:00
Felix Fietkau
3f20fd4ee0 relayd: fix reload / interface restart issues
- replace the hotplug script with an interface trigger
- add netdev params to procd to trigger restart

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 13:20:33 +01:00
Felix Fietkau
9c402d03e6 kirkwood: enable initramfs images by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 12:52:18 +01:00
Felix Fietkau
f04b651453 ath5k: drop bogus warning on drv_set_key with unsupported cipher (FS#334)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 12:18:36 +01:00
Felix Fietkau
00ad43f047 ath9k: remove old rx dma stop check optimization
This commit was added to improve reset time on old SoC devices that run
into chip hangs more frequently. However with the more recent addition
of full WMAC reset on these chips, it could be problematic.
Drop this patch to ensure that DMA activity is really stopped before the
chip reset is issued

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 12:18:36 +01:00
Stijn Tintel
1b5640be33 odhcpd: bump to git HEAD
8dc2a59 Revert "Respect interface "ignore" settings as documented."
93ab25b router: skip parse_routes when ra_default > 1

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-12-27 10:50:29 +01:00
Jo-Philipp Wich
e1d1c31890 opkg: vfork external gzip command to uncompress data
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.

Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.

This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.

Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 09:50:00 +01:00
Stijn Tintel
dc5f496a0d Revert "opkg: vfork external gzip command to uncompress data"
This reverts commit 0090adcd5c.
It breaks reading package list in /tmp/opkg-lists, making it impossible
to install packages from feeds in snapshots.
2016-12-27 04:41:30 +01:00