Commit graph

19271 commits

Author SHA1 Message Date
Felix Fietkau
c33e016fa5 ar8216: do not strip vlan tags when running with vlan_enable=0
SVN-Revision: 29718
2012-01-12 10:15:08 +00:00
Gabor Juhos
fbf81c8e79 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c
SVN-Revision: 29713
2012-01-11 18:00:50 +00:00
Daniel Dickinson
034b7f0ef5 Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics.
SVN-Revision: 29712
2012-01-11 13:47:48 +00:00
Gabor Juhos
67f62cf5cf ar71xx: disable ath79 in order to get rid of Kconfig warnings
SVN-Revision: 29711
2012-01-11 09:14:19 +00:00
Gabor Juhos
88d8cdd503 ar71xx: pb44_spi: add shutdown handler
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29710
2012-01-11 09:14:18 +00:00
Gabor Juhos
e1b7995aef ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove
SVN-Revision: 29709
2012-01-11 09:14:17 +00:00
Gabor Juhos
67444c7795 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers
SVN-Revision: 29708
2012-01-11 09:14:15 +00:00
Gabor Juhos
0f566a376c ar71xx: ar71xx_spi: add shutdown handler
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29707
2012-01-11 09:14:14 +00:00
Gabor Juhos
09a6e3f662 ar71xx: ar71xx_spi: save and restore regs from probe/remove
SVN-Revision: 29706
2012-01-11 09:14:13 +00:00
Gabor Juhos
714a9bd641 ar71xx: ar71xx_wdt: add shutdown handler
SVN-Revision: 29705
2012-01-11 09:14:11 +00:00
Jo-Philipp Wich
9054bc91b3 cmake.mk: fix passing of LDFLAGS
SVN-Revision: 29701
2012-01-09 05:42:04 +00:00
Jo-Philipp Wich
690701d26e make prepare_kernel_conf target depend on quilt instead of sed. Preparing the source tree requires quilt and installing quilt implies installing sed.
SVN-Revision: 29697
2012-01-08 16:52:41 +00:00
Jo-Philipp Wich
73b4974397 metadata.pl: filter direct recursive depends like "select PACKAGE_kmod-ipv6 if PACKAGE_kmod-ipv6"
SVN-Revision: 29695
2012-01-08 15:49:20 +00:00
Jo-Philipp Wich
7251541786 pptp: remove support for underlying ipproto, it is adviced since a while that pptp should be declared as separate interface alognside wan - in this configuration the ipproto will cause stray udhcpc errors due to not existent interfaces, so remove it
SVN-Revision: 29694
2012-01-08 15:41:34 +00:00
Jo-Philipp Wich
df57c5fdde cyassl: use patch-libtool pkg fixup
SVN-Revision: 29693
2012-01-08 15:39:42 +00:00
Felix Fietkau
37020b2d6b zlib: fix duplicate function declarations for largefile support
SVN-Revision: 29690
2012-01-08 15:39:11 +00:00
Jo-Philipp Wich
e53afbbe64 introduce a USE_EXTERNAL_LIBC symbol which gets selected by EXTERNAL_TOOLCHAIN || NATIVE_TOOLCHAIN Currently we always assume uClibc if an external toolchain is used, this breaks for non-uClibc toolchains or even vanilla uClibc ones since they do not share the external librpc semantics as OpenWrt. Solve the problem by defining an abstract "EXTERNAL_LIBC" which packages might or might not depend on.
SVN-Revision: 29689
2012-01-08 15:34:23 +00:00
Jo-Philipp Wich
4e88bcfb00 base-files: implement a --force option for sysupgrade to override image checks, useful to upgrade old ar71xx installations to current trunk ones
SVN-Revision: 29688
2012-01-08 15:30:37 +00:00
Jo-Philipp Wich
8094fa46da firewall: add support for "local" port forwards which target an internal address on the router itself
SVN-Revision: 29687
2012-01-08 15:29:24 +00:00
Jo-Philipp Wich
97af76a920 include: calculate md5sum over sorted kernel config symbol list and incorperate it into the kernel metapackage version, make kmods depend on this specific version. The aim of this change is to invalidate kmods which are built against a different kernel config on the opkg metadata level. Manual copying and insmod of custom *.ko files, e.g. for development purpose, is still possible.
SVN-Revision: 29686
2012-01-08 15:23:11 +00:00
Felix Fietkau
2d17b67c28 ath9k: merge a channel change fix from linux-wireless
SVN-Revision: 29684
2012-01-07 20:54:33 +00:00
Gabor Juhos
9727256330 ar71xx: refresh patches
SVN-Revision: 29683
2012-01-07 19:36:43 +00:00
Gabor Juhos
4edff7d3ef ar71xx: add a profile and build images for the TL-WR2543N/ND
SVN-Revision: 29682
2012-01-07 19:36:42 +00:00
Gabor Juhos
8a8e5bde15 firware-utils/mktplinkfw: add TL-WR2543N/ND support
SVN-Revision: 29681
2012-01-07 19:36:40 +00:00
Gabor Juhos
a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board
The WLAN LEDs are not working yet.

SVN-Revision: 29680
2012-01-07 19:36:35 +00:00
Gabor Juhos
a56bdeff9d ar71xx: allow to specify max read size for m25p80
Reading from the flash chip on the TL-WR2543ND seems buggy.
If the SPI flash driver tries to read too much data in one
SPI transfer, the flash chip returns bogus values. This can
be caused by a buggy flash chip on my board, or it can
be a bug in our SPI driver.

Add a workaround to the m25p80 driver until I find out the
root cause of the problem. The patch allows to specify the
maximum numner of bytes which can be read safely withint
one SPI transfer.

SVN-Revision: 29679
2012-01-07 19:36:33 +00:00
Gabor Juhos
8b567fb508 generic: add driver for the RTL8367R/M switches
SVN-Revision: 29678
2012-01-07 19:36:31 +00:00
Gabor Juhos
87fb92ee03 generic: rtl8366: preparing for RTL8367 support
* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields

SVN-Revision: 29677
2012-01-07 19:36:30 +00:00
Gabor Juhos
43196813d7 generic: rtl8366_smi: add timeout message
SVN-Revision: 29676
2012-01-07 19:36:25 +00:00
Gabor Juhos
67b2814842 ar71xx: local mac support on the wndr3700
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

SVN-Revision: 29675
2012-01-07 17:24:44 +00:00
Gabor Juhos
6c74274c8d generic: improve MIPS kexec support
It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/

Now the kernel can use the command line parameter from kexec-tools.

Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).

SVN-Revision: 29674
2012-01-07 16:29:16 +00:00
Gabor Juhos
f638c6207b ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards
SVN-Revision: 29672
2012-01-06 15:54:59 +00:00
Jo-Philipp Wich
3e15593955 openssl: bump to v1.0.0f (CVE-2011-4108, CVE-2011-4576, CVE-2011-4577, CVE-2011-4619, CVE-2012-0027)
SVN-Revision: 29670
2012-01-06 15:18:30 +00:00
Gabor Juhos
1e848b17ad ar71xx: add support for Redwave RW2458N
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
2012-01-06 07:20:59 +00:00
Gabor Juhos
84cd8a5ee0 ar71xx: fix RB-750 network configuration
SVN-Revision: 29668
2012-01-06 07:20:54 +00:00
Gabor Juhos
8eb0b7ab3d ar71xx: fix sections mismatch warnings in the nand drivers
SVN-Revision: 29667
2012-01-05 18:08:33 +00:00
Gabor Juhos
232eb83f74 ar71xx: fix LED configuration on the RB-750
SVN-Revision: 29666
2012-01-05 18:08:28 +00:00
Gabor Juhos
c3b763ac77 package/kernel: add package for the PCF2123 RTC driver
SVN-Revision: 29664
2012-01-04 21:16:21 +00:00
Gabor Juhos
d65c6fe720 ar71xx: create profile and build image for the ALFA AP96 board
SVN-Revision: 29663
2012-01-04 21:13:57 +00:00
Gabor Juhos
b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
2012-01-04 21:13:54 +00:00
Gabor Juhos
807e046193 ar71xx: specify console kernel parameter for the Compex boards
SVN-Revision: 29660
2012-01-04 17:30:59 +00:00
Gabor Juhos
923f3e3752 ar71xx: allow to use the command line hack on compex devices
SVN-Revision: 29659
2012-01-04 17:30:58 +00:00
Gabor Juhos
2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
2012-01-04 17:30:57 +00:00
Gabor Juhos
301b1b4f92 ar71xx: show correct model name on TL-WA701N/ND boards
SVN-Revision: 29657
2012-01-04 17:30:55 +00:00
Gabor Juhos
ac68f0d8fa ar71xx: add profile and build image for the TL-WA701N/ND boards
SVN-Revision: 29656
2012-01-04 17:30:54 +00:00
Gabor Juhos
923e5d3543 firmware-utils/mktplinkfw: add support for TL-WA701N/ND
SVN-Revision: 29655
2012-01-04 17:30:53 +00:00
Gabor Juhos
72019009c7 ar71xx: fix network configuration for the TL-WA901N/ND boards
SVN-Revision: 29654
2012-01-04 17:30:52 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
SVN-Revision: 29653
2012-01-04 17:30:50 +00:00
Gabor Juhos
5eb502d9c1 ar71xx: add default LED configuration for the TL-MR3020
Also use the system LED for diagnostic.

SVN-Revision: 29652
2012-01-04 17:30:49 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
2012-01-04 17:30:47 +00:00