KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
27369 commits 3 branches 0 tags 154 MiB
Commit graph

781 commits

Author SHA1 Message Date
Gabor Juhos
5dec87afef ar71xx: fix ethernet device registration for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
 2012-12-22 12:12:48 +00:00
Gabor Juhos
4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
 2012-12-22 12:12:44 +00:00
Gabor Juhos
f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
 2012-12-22 12:12:43 +00:00
Gabor Juhos
a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
 2012-12-22 12:12:35 +00:00
Gabor Juhos
0767605d17 ar71xx: add kernel support for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg:
 - remove custom LED and button arrays
 - use separate machine specific patch
 - update Kconfig]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34779
 2012-12-19 08:50:35 +00:00
Gabor Juhos
bc82db7d78 ar71xx: add kernel support for the NETGEAR WNDR4300 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34647
 2012-12-12 16:49:49 +00:00
Gabor Juhos
75b71f4a74 ar71xx: add ap91_pci_init_simple helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34646
 2012-12-12 16:49:48 +00:00
Gabor Juhos
1f7ae58a2c ar71xx: ar934x_nfc: allow to control DMA data swap via platform data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34588
 2012-12-10 10:38:07 +00:00
Gabor Juhos
d44d954dec ar71xx: add kernel support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34239
 2012-11-18 10:18:01 +00:00
Gabor Juhos
d62bddc620 ar71xx: update PCI IRQ map for RB4xx devices 
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34238
 2012-11-18 09:51:04 +00:00
Gabor Juhos
8d4857d677 ar71xx: add kernel support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34231
 2012-11-18 09:32:33 +00:00
Gabor Juhos
91bab828aa ar71xx: add support for TP-Link TL-WA7510N 
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34187
 2012-11-13 14:48:00 +00:00
Gabor Juhos
f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
 2012-11-05 13:23:27 +00:00
Gabor Juhos
ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
 2012-11-04 22:08:54 +00:00
Gabor Juhos
7228a91a3b ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards 
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33993
 2012-10-29 17:24:30 +00:00
Gabor Juhos
d54c9653e9 ar71xx: add support for the Senao CAP4200AG board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33956
 2012-10-27 08:55:38 +00:00
Gabor Juhos
f1f388d527 ar71xx: rw2458n - fix flash parts 
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33867
 2012-10-19 18:32:49 +00:00
Gabor Juhos
31387947c8 ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33818
 2012-10-17 18:27:47 +00:00
Gabor Juhos
5ffc08e3dc ar71xx: add a helper function for setting up ETH_CFG register on AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33817
 2012-10-17 18:27:45 +00:00
Gabor Juhos
c5a32cfc92 ar71xx: add support for the OpenMesh OM2P-HS board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33800
 2012-10-17 08:26:01 +00:00
Gabor Juhos
196c6c5b45 ar71xx: add support for the TL-WR841N/ND v8 board 
SVN-Revision: 33621
 2012-10-04 20:16:03 +00:00
Gabor Juhos
170cd7a19a ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac 
SVN-Revision: 33575
 2012-09-27 20:05:42 +00:00
Gabor Juhos
e7b1949d87 ar71xx: automatically find WLAN calibration data on TEW-673GRU 
SVN-Revision: 33539
 2012-09-25 12:57:40 +00:00
Gabor Juhos
8ed8e51e74 ar71xx: automatically find WLAN calibration data on DIR-825-B1 
SVN-Revision: 33538
 2012-09-25 12:57:38 +00:00
Gabor Juhos
e70ad61e44 ar71xx: use different machtype and setup for the TL-MR3040 
Should fix #12211. Compile tested only.

SVN-Revision: 33535
 2012-09-24 18:45:56 +00:00
Gabor Juhos
5804b9d1b7 ar71xx: register the NAND controller device on the RB2011 
SVN-Revision: 33388
 2012-09-13 07:26:26 +00:00
Gabor Juhos
4fd67c3cd4 ar71xx: add device registration code for the AR934x NAND flash controller 
SVN-Revision: 33387
 2012-09-13 07:26:25 +00:00
Gabor Juhos
aa2f4d4c8d ar71xx: add initial support for RB2011UAS-2HnD 
SVN-Revision: 33349
 2012-09-09 14:05:32 +00:00
Gabor Juhos
3686e18727 ar71xx: use routerboot_find_tag to find wlan data offset on RB751 
SVN-Revision: 33348
 2012-09-09 14:05:30 +00:00
Gabor Juhos
ccabe4a1b4 ar71xx: add RouterBoot related helper routines 
SVN-Revision: 33347
 2012-09-09 14:05:28 +00:00
Gabor Juhos
44bf7c7cc1 ar71xx: define MTD partitions for RB2011 
SVN-Revision: 33345
 2012-09-09 14:05:24 +00:00
Gabor Juhos
6ae5ec16e0 ar71xx: add preliminary support for Mikrotik RB2011L 
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 33344
 2012-09-09 14:05:22 +00:00
Gabor Juhos
94bac7366c ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x 
SVN-Revision: 33343
 2012-09-09 14:05:20 +00:00
Gabor Juhos
7592057774 ar71xx: add dynamic MDIO clock calculation 
SVN-Revision: 33342
 2012-09-09 14:05:17 +00:00
Gabor Juhos
88a5478781 ar71xx: use the RLE library for RB751 
SVN-Revision: 33338
 2012-09-08 17:51:56 +00:00
Gabor Juhos
11c3392b7f Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" 
That was based on assumptions.

SVN-Revision: 33310
 2012-08-29 10:37:55 +00:00
Gabor Juhos
eb9a97a360 ar71xx: all0315n: fix ethernet according to vendor info 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33309
 2012-08-29 10:37:54 +00:00
Gabor Juhos
5fdbb33db4 ar71xx: Buffalo WZR-HP-AG300H LED support 
An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33294
 2012-08-29 10:11:55 +00:00
Gabor Juhos
eebdd633e4 ar71xx: add support for the Allnet ALL0315N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33281
 2012-08-27 14:55:31 +00:00
Gabor Juhos
cca873e8e0 ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33280
 2012-08-27 14:55:26 +00:00
Gabor Juhos
8b3d95bba9 ar71xx: add support for the TRENDnet TEW-712BR board 
SVN-Revision: 33231
 2012-08-22 20:09:13 +00:00
Gabor Juhos
2811d6c183 ar71xx: fix comment style in mach-tl-wr2543n.c 
SVN-Revision: 33227
 2012-08-22 12:42:59 +00:00
Gabor Juhos
5a694e09c8 ar71xx: add ALL0305 board alias 
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33224
 2012-08-22 12:33:22 +00:00
Gabor Juhos
0517183b9c ar71xx: add support for TP-Link TL-WDR3600 
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.

[juhosg: remove the custom machine type, change the board name instead]

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 33219
 2012-08-22 09:43:18 +00:00
John Crispin
968ac3fd03 add led defintion for the WR2543 5GHz WLAN LED 
Signed-off-by: Andy Leiserson <andy@leiserson.org>

SVN-Revision: 33215
 2012-08-22 09:10:24 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board 
SVN-Revision: 32944
 2012-08-02 09:54:28 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation 
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
 2012-08-01 12:24:57 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support 
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
 2012-08-01 12:24:52 +00:00
Gabor Juhos
7c932579fa ar71xx: make 2.4GHz wlan LED work on the WR2543N 
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

SVN-Revision: 32615
 2012-07-05 16:25:26 +00:00
Gabor Juhos
797944d3f1 ar71xx: add support for the OpenMesh OM2P-LC board 
Patch-by: Marek Linder <marek@open-mesh.com>

SVN-Revision: 32611
 2012-07-05 08:26:53 +00:00
Gabor Juhos
d1b237b335 ar71xx: add initial support for the QCA955X SoCs 
SVN-Revision: 32606
 2012-07-05 08:26:47 +00:00
Gabor Juhos
86013d40d5 ar71xx: remove the built-in MTD map of the ALL0258N 
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32585
 2012-07-03 15:24:01 +00:00
Gabor Juhos
8b9931fd27 ar71xx: add support for the TL-WDR4300 board 
SVN-Revision: 32459
 2012-06-19 11:51:17 +00:00
Gabor Juhos
f509a87f2d ar71xx: remove superfluous include of asm/mach-ath79/pci.h 
SVN-Revision: 32455
 2012-06-19 10:13:43 +00:00
Gabor Juhos
1a1121158f ar71xx: add a common function to configure USB power GPIOs 
SVN-Revision: 32454
 2012-06-19 10:13:41 +00:00
Felix Fietkau
26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
SVN-Revision: 32447
 2012-06-19 00:22:04 +00:00
Felix Fietkau
dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection 
SVN-Revision: 32336
 2012-06-13 12:54:22 +00:00
Felix Fietkau
73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
SVN-Revision: 32093
 2012-06-06 17:24:12 +00:00
Felix Fietkau
dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
SVN-Revision: 32092
 2012-06-06 17:24:09 +00:00
Felix Fietkau
8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
SVN-Revision: 31925
 2012-05-27 21:02:41 +00:00
Gabor Juhos
013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD 
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
 2012-05-23 21:05:25 +00:00
Gabor Juhos
ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
 2012-05-05 17:02:35 +00:00
Gabor Juhos
3e3a4d3d6b ar71xx: allow to disable link polling on unused PHYs 
SVN-Revision: 31533
 2012-04-29 18:29:24 +00:00
Gabor Juhos
408de85883 ar71xx: use ap91_pci_init for RB751{,G} 
SVN-Revision: 31356
 2012-04-19 21:31:48 +00:00
Gabor Juhos
0a9832b50d ar71xx: move USB device registration directly into rb751{,g}_setup 
SVN-Revision: 31355
 2012-04-19 21:31:43 +00:00
Gabor Juhos
78967e6640 ar71xx: add ap9x_pci_get_wmac_data helper 
SVN-Revision: 31354
 2012-04-19 21:31:42 +00:00
Gabor Juhos
5c9ca38e47 ar71xx: add sanity checks to decode_rle 
Also use -EINVAL instead of -1.

SVN-Revision: 31353
 2012-04-19 21:31:40 +00:00
Gabor Juhos
e295a077ce ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD 
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

SVN-Revision: 31208
 2012-04-06 06:45:07 +00:00
Gabor Juhos
b77217d963 ar71xx: boost SPI flash read performance 
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

SVN-Revision: 31118
 2012-03-27 19:38:17 +00:00
Gabor Juhos
6cd5fb7001 ar71xx: remove the built-in MTD map of the AP96 board 
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31112
 2012-03-27 19:38:07 +00:00
Gabor Juhos
61ee283899 ar71xx: remove the built-in MTD map of the PB92 board 
Pass the mtd_layout via the kernel command line instead

SVN-Revision: 31111
 2012-03-27 19:38:05 +00:00
Gabor Juhos
1094dc1996 ar71xx: remove the built-in MTD map of the Zcomax devices 
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31110
 2012-03-27 19:38:04 +00:00
Gabor Juhos
87e4ec687b ar71xx: remove the built-in MTD maps of several boards 
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

SVN-Revision: 31108
 2012-03-27 19:38:01 +00:00
Gabor Juhos
f4d1e3d147 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 
SVN-Revision: 31102
 2012-03-27 19:37:51 +00:00
Gabor Juhos
8a2e4b49de ar71xx: add initial support for RB750GL 
SVN-Revision: 31025
 2012-03-19 15:57:04 +00:00
Gabor Juhos
d19f3dd512 ar71xx: make rb750_latch_change 'static void' 
SVN-Revision: 31024
 2012-03-19 15:57:03 +00:00
Gabor Juhos
5348f46c80 ar71xx: add latch_change field to rb750_led_platform_data 
SVN-Revision: 31023
 2012-03-19 15:57:01 +00:00
Gabor Juhos
8a471efe01 ar71xx: add platform data for the RB750 NAND driver 
SVN-Revision: 31022
 2012-03-19 15:56:59 +00:00
Gabor Juhos
e9b45ebaba ar71xx: add AR934x specific interface speed setup for ge0 
SVN-Revision: 31017
 2012-03-19 11:11:20 +00:00
Gabor Juhos
6036151187 ar71xx: add support for the jjPlus JA76PF2 board 
SVN-Revision: 30957
 2012-03-16 18:00:34 +00:00
Gabor Juhos
a680662391 ar71xx: change LED name prefix on the jjplus boards 
SVN-Revision: 30956
 2012-03-16 18:00:26 +00:00
Gabor Juhos
1c5ac02a29 ar71xx: reset the switch on AR934x before ethernet device registration 
SVN-Revision: 30922
 2012-03-13 17:29:33 +00:00
Gabor Juhos
66df117d1b ar71xx: use a dummy callback for interfaces with fixed speed 
SVN-Revision: 30913
 2012-03-12 20:38:58 +00:00
Gabor Juhos
8b2b37ae58 ar71xx: merge ar934x_bo_ddr_flush patch 
SVN-Revision: 30912
 2012-03-12 20:38:57 +00:00
Gabor Juhos
2d89fa7f43 ar71xx: fix WPS button polarity on TL-WR2543N 
SVN-Revision: 30849
 2012-03-07 19:50:53 +00:00
Gabor Juhos
d72bde99cd ar71xx: merge files-3.2 to files 
SVN-Revision: 30405
 2012-02-10 08:19:31 +00:00
Gabor Juhos
386cbfe45b ar71xx: move arch specific files to files-2.6.39 
SVN-Revision: 29867
 2012-01-22 22:38:11 +00:00
Gabor Juhos
ef1c53b7b7 ar71xx: change board id of the UniFi board 
SVN-Revision: 29849
 2012-01-22 13:51:50 +00:00
Gabor Juhos
fbf81c8e79 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
SVN-Revision: 29713
 2012-01-11 18:00:50 +00:00
Gabor Juhos
a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

SVN-Revision: 29680
 2012-01-07 19:36:35 +00:00
Gabor Juhos
67b2814842 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

SVN-Revision: 29675
 2012-01-07 17:24:44 +00:00
Gabor Juhos
1e848b17ad ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
 2012-01-06 07:20:59 +00:00
Gabor Juhos
b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
 2012-01-04 21:13:54 +00:00
Gabor Juhos
923f3e3752 ar71xx: allow to use the command line hack on compex devices 
SVN-Revision: 29659
 2012-01-04 17:30:58 +00:00
Gabor Juhos
2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
 2012-01-04 17:30:57 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
SVN-Revision: 29653
 2012-01-04 17:30:50 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
 2012-01-04 17:30:47 +00:00
Gabor Juhos
1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards 
SVN-Revision: 29635
 2012-01-01 19:30:25 +00:00
Gabor Juhos
5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
SVN-Revision: 29631
 2011-12-31 15:02:46 +00:00
Gabor Juhos
557009bbdb ar71xx: fix LEDs on the WRT400N 
SVN-Revision: 29624
 2011-12-31 13:54:11 +00:00
Jo-Philipp Wich
ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
SVN-Revision: 29593
 2011-12-21 01:27:48 +00:00
Felix Fietkau
11013ad947 ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
SVN-Revision: 29568
 2011-12-19 09:04:15 +00:00
Felix Fietkau
0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
 2011-12-18 22:20:17 +00:00
Gabor Juhos
67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
 2011-12-15 22:25:38 +00:00
Gabor Juhos
5bbd416e38 ar71xx: add defines for the AR934X GMAC interface 
SVN-Revision: 29556
 2011-12-15 22:25:36 +00:00
Gabor Juhos
e47a8c2bb2 ar71xx: fix GMAC1 interface speed on the DB120 board 
SVN-Revision: 29555
 2011-12-15 22:25:35 +00:00
Gabor Juhos
00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
SVN-Revision: 29553
 2011-12-15 22:25:30 +00:00
Gabor Juhos
e2a546d475 ar71xx: allow to attach the internal switch for AR934x 
SVN-Revision: 29550
 2011-12-15 22:25:22 +00:00
Gabor Juhos
9ae65588d8 ar71xx: introduce ar71xx_switch_data 
SVN-Revision: 29549
 2011-12-15 22:25:11 +00:00
Gabor Juhos
d1f7783612 ar71xx: fix mac addresses on jjPlus devices 
SVN-Revision: 29538
 2011-12-15 13:25:18 +00:00
Gabor Juhos
b9c5cb5c9a ar71xx: add support for ALFA Network's Hornet-UB board 
SVN-Revision: 29535
 2011-12-14 20:54:10 +00:00
Gabor Juhos
66c8cc0f6d ar71xx: add GPIO function bit defines for AR933X 
SVN-Revision: 29534
 2011-12-14 20:54:07 +00:00
Felix Fietkau
7076d74b21 ar71xx: fix gpio count for ar7241/ar7242 
SVN-Revision: 29532
 2011-12-14 20:47:24 +00:00
Felix Fietkau
b878f4a927 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h 
SVN-Revision: 29531
 2011-12-14 20:21:42 +00:00
Felix Fietkau
3806671fe5 ar71xx: fix wireless led on wzr-hp-g450h 
SVN-Revision: 29515
 2011-12-13 15:00:43 +00:00
Gabor Juhos
2dd7dfb1c9 ar71xx: enable AR9341 support at setup.c 
Patch-by: dyq <729650915@qq.com>

SVN-Revision: 29514
 2011-12-13 14:59:43 +00:00
Gabor Juhos
058998acdb ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29513
 2011-12-13 14:59:40 +00:00
Felix Fietkau
48f9717371 ar71xx: add gpios and usb for wzr-hp-g450h 
SVN-Revision: 29509
 2011-12-13 13:33:44 +00:00
Gabor Juhos
4ca2d86493 ar71xx: use RedBoot parser on PB44 
SVN-Revision: 29501
 2011-12-11 15:52:47 +00:00
Gabor Juhos
bdc2eca7de ar71xx: use correct mac on the lan interface on several TP-LINK devices 
SVN-Revision: 29458
 2011-12-05 21:10:58 +00:00
Gabor Juhos
0103069372 ar71xx: allow to pass negative offset values for ar71xx_init_mac 
SVN-Revision: 29457
 2011-12-05 21:10:55 +00:00
Gabor Juhos
ada92aee62 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set 
SVN-Revision: 29456
 2011-12-05 18:21:15 +00:00
Felix Fietkau
1f809532de ar71xx: add preliminary support for wzr-hp-g450h 
SVN-Revision: 29441
 2011-12-05 14:20:51 +00:00
Felix Fietkau
d1f63f8538 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well 
SVN-Revision: 29440
 2011-12-05 14:20:44 +00:00
Gabor Juhos
4cc2b9bb06 ar71xx: rewrite WNDR3700/3800 handling 
SVN-Revision: 29434
 2011-12-05 13:03:54 +00:00
Gabor Juhos
7cfa39f032 ar71xx: use the tp-link parser on the tp-link boards 
Also remove static partition maps.

SVN-Revision: 29416
 2011-12-03 18:13:31 +00:00
Gabor Juhos
fc7fb29bae ar71xx: run the RedBoot parser only on the RedBoot based boards 
SVN-Revision: 29414
 2011-12-03 18:13:25 +00:00
Gabor Juhos
9cc28d5aa0 ar71xx: run the MyLoader parser only on the WP543 board 
SVN-Revision: 29413
 2011-12-03 18:13:23 +00:00
Gabor Juhos
67a0b9aada ar71xx: run the wrt160nl parser only on the WRT160NL board 
Also remove static mtd partition definitions.

SVN-Revision: 29412
 2011-12-03 18:13:20 +00:00
Gabor Juhos
f188f1bad5 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

SVN-Revision: 29395
 2011-12-01 22:49:02 +00:00
Gabor Juhos
f20797306a ar71xx: modify phy mask of the WP543 board 
This fixes ethernet on newer boards. Based on a patch from #9702.

SVN-Revision: 29328
 2011-11-24 20:09:43 +00:00
Gabor Juhos
c20d7378e5 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 29326
 2011-11-24 20:09:38 +00:00
Gabor Juhos
9990523a0f ar71xx: set GE0 phy_mask for AR933x 
SVN-Revision: 29274
 2011-11-20 11:30:10 +00:00
Gabor Juhos
f27548448b ar71xx: fix USB LED on the DB120 board 
SVN-Revision: 29126
 2011-11-14 17:43:15 +00:00
Gabor Juhos
6ebbb1329d ar71xx: add a function for selecting output signal on a given GPIO pin 
SVN-Revision: 29125
 2011-11-14 17:43:14 +00:00
Gabor Juhos
0c1d3617d7 ar71xx: fix GPIO function handling on AR934x 
SVN-Revision: 29124
 2011-11-14 17:43:13 +00:00
Gabor Juhos
aa0c8c4885 ar71xx: add AR71XX_ prefix to GPIO_REG_* defines 
SVN-Revision: 29123
 2011-11-14 17:43:11 +00:00
Gabor Juhos
12dae96097 ar71xx: fix a compiler warning 
SVN-Revision: 29110
 2011-11-14 13:07:47 +00:00
Gabor Juhos
5ae0fd802c ar71xx: fix GPIO count for AR934x 
SVN-Revision: 29109
 2011-11-14 13:07:45 +00:00
Gabor Juhos
e52269364a ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X 
SVN-Revision: 29108
 2011-11-14 11:49:53 +00:00
Gabor Juhos
3104d70552 ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling 
SVN-Revision: 29107
 2011-11-14 11:49:51 +00:00
Gabor Juhos
42e8ae09b5 ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines 
SVN-Revision: 29106
 2011-11-14 11:49:49 +00:00
Gabor Juhos
c15caea360 ar71xx: add an irq parameter for ar724x_pcibios_init 
SVN-Revision: 29105
 2011-11-14 11:49:47 +00:00
Gabor Juhos
cf90b24bb9 ar71xx: remove hardwired interface parameters from mach-* files 
SVN-Revision: 29103
 2011-11-14 07:38:09 +00:00
Gabor Juhos
defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth 
SVN-Revision: 29102
 2011-11-14 07:38:07 +00:00
Gabor Juhos
6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth 
SVN-Revision: 29101
 2011-11-14 07:38:05 +00:00
Gabor Juhos
368bbc510b ar71xx: enable has_gbit flag on AR724{0,1} 
SVN-Revision: 29026
 2011-11-13 17:36:36 +00:00
Gabor Juhos
15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board 
SVN-Revision: 29022
 2011-11-13 12:48:03 +00:00
Gabor Juhos
f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
SVN-Revision: 29021
 2011-11-13 12:48:01 +00:00
Gabor Juhos
d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices 
SVN-Revision: 29016
 2011-11-13 11:27:03 +00:00
Gabor Juhos
538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks 
SVN-Revision: 29013
 2011-11-13 11:26:59 +00:00
Gabor Juhos
93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

SVN-Revision: 29012
 2011-11-13 11:26:57 +00:00
Gabor Juhos
9579bb4267 ar71xx: ag71xx: remove MII interface setup code 
SVN-Revision: 29011
 2011-11-13 11:26:56 +00:00
Gabor Juhos
da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
SVN-Revision: 29010
 2011-11-13 11:26:54 +00:00
Gabor Juhos
5ad763075e ar71xx: use the button for WPS control on the DB120 
SVN-Revision: 28990
 2011-11-12 12:50:20 +00:00
Gabor Juhos
4555be2bec ar71xx: register the second ethernet interface on the DB120 board 
SVN-Revision: 28989
 2011-11-12 12:50:19 +00:00
Gabor Juhos
368c6605a0 ar71xx: implement SoC specific phy interface setup 
SVN-Revision: 28988
 2011-11-12 12:50:18 +00:00
Gabor Juhos
21d317b9cc ar71xx: move phy interface setup into a separate function 
SVN-Revision: 28987
 2011-11-12 12:50:16 +00:00
Gabor Juhos
aff0c84ffa ar71xx: register both MDIO bus on the DB120 board 
SVN-Revision: 28986
 2011-11-12 12:09:59 +00:00
Gabor Juhos
b144249108 ar71xx: add AR934X specific MDIO registration code 
SVN-Revision: 28985
 2011-11-12 12:09:56 +00:00
Gabor Juhos
f835106c8c ar71xx: add a secondary mdio bus 
SVN-Revision: 28984
 2011-11-12 12:09:54 +00:00
Gabor Juhos
90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
SVN-Revision: 28983
 2011-11-12 12:09:50 +00:00
Gabor Juhos
9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio 
SVN-Revision: 28982
 2011-11-12 12:09:48 +00:00
Gabor Juhos
b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
SVN-Revision: 28981
 2011-11-12 12:09:42 +00:00
Gabor Juhos
a9216bb76e ar71xx: add AR934x specific USB setup 
SVN-Revision: 28980
 2011-11-12 10:54:20 +00:00
Gabor Juhos
346e44105a ar71xx: register the first ethernet interface on the DB120 board 
SVN-Revision: 28979
 2011-11-12 10:54:18 +00:00
Gabor Juhos
b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X 
SVN-Revision: 28978
 2011-11-12 10:54:17 +00:00
Gabor Juhos
e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits 
SVN-Revision: 28976
 2011-11-12 10:54:15 +00:00
Gabor Juhos
d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x 
SVN-Revision: 28974
 2011-11-12 10:54:09 +00:00
Gabor Juhos
43e993e5f5 ar71xx: fix AR934X clock frequency calculation 
SVN-Revision: 28973
 2011-11-12 10:54:08 +00:00
Gabor Juhos
a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board 
SVN-Revision: 28805
 2011-11-07 12:59:10 +00:00
Gabor Juhos
4509af17ed ar71xx: add support for the Buffalo WHR-G301N board 
SVN-Revision: 28803
 2011-11-07 12:59:07 +00:00
Gabor Juhos
4aace1e2e3 ar71xx: fix WHR-HP-G300N MTD partitions 
SVN-Revision: 28800
 2011-11-07 12:59:03 +00:00
Gabor Juhos
4c985724af ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 
SVN-Revision: 28709
 2011-11-01 14:38:12 +00:00
Gabor Juhos
91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
 2011-11-01 11:20:52 +00:00
Gabor Juhos
21e651c9a1 ar71xx: add AR933X GMAC register defines 
SVN-Revision: 28705
 2011-11-01 11:20:50 +00:00
Gabor Juhos
f372620ffa ar71xx: unify LED names on Planex boards 
SVN-Revision: 28703
 2011-11-01 11:20:47 +00:00
Gabor Juhos
66ab406d5a ar71xx: unify LED names on Buffalo boards 
SVN-Revision: 28702
 2011-11-01 11:20:46 +00:00
Gabor Juhos
e7586959df ar71xx: unify LED names on TP-Link boards 
SVN-Revision: 28701
 2011-11-01 11:20:44 +00:00
Gabor Juhos
1646346798 ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
 2011-10-27 07:54:51 +00:00
Gabor Juhos
d02f22fea1 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28615
 2011-10-27 07:54:47 +00:00
Gabor Juhos
9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
 2011-10-24 21:49:26 +00:00
Gabor Juhos
d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
 2011-10-24 21:49:21 +00:00
Jonas Gorski
a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G 
SVN-Revision: 28423
 2011-10-11 23:05:16 +00:00
Gabor Juhos
6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board 
Patch-by: Lukas Kuna

SVN-Revision: 28295
 2011-09-23 19:56:39 +00:00
Gabor Juhos
733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
 2011-09-21 11:47:53 +00:00
Gabor Juhos
d3617ac7d3 ar71xx: add AR933x specific USB setup function 
SVN-Revision: 28276
 2011-09-21 11:47:51 +00:00
Gabor Juhos
91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper 
SVN-Revision: 28275
 2011-09-21 11:47:50 +00:00
Gabor Juhos
079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries 
SVN-Revision: 28273
 2011-09-21 11:47:47 +00:00
Gabor Juhos
73dac07c44 ar71xx: sort AR71XX_MACH_* entries 
SVN-Revision: 28272
 2011-09-21 11:47:45 +00:00
Felix Fietkau
65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037) 
SVN-Revision: 28182
 2011-09-06 05:38:23 +00:00
Felix Fietkau
cd2c68501c ar71xx: fix ethernet PLL setting on ar7242 
SVN-Revision: 28124
 2011-08-29 21:23:46 +00:00
Felix Fietkau
12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240 
SVN-Revision: 27975
 2011-08-13 22:30:14 +00:00
Felix Fietkau
d26bb6c59c ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922) 
SVN-Revision: 27959
 2011-08-11 13:52:40 +00:00
Jonas Gorski
e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
 2011-07-28 11:57:51 +00:00
Felix Fietkau
9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh 
SVN-Revision: 27756
 2011-07-24 14:40:35 +00:00
Felix Fietkau
1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data 
SVN-Revision: 27754
 2011-07-24 14:40:23 +00:00
Felix Fietkau
9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684) 
SVN-Revision: 27739
 2011-07-24 08:02:20 +00:00
Felix Fietkau
fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x 
SVN-Revision: 27703
 2011-07-20 12:04:34 +00:00
Gabor Juhos
f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

SVN-Revision: 27320
 2011-06-30 12:15:33 +00:00