Commit graph

29603 commits

Author SHA1 Message Date
Hauke Mehrtens
bb5a18ff92 mpc83xx: add support for kernel 3.14
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43797
2014-12-29 17:11:13 +00:00
Hauke Mehrtens
cb96191088 mpc52xx: add support for kernel 3.14
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43796
2014-12-29 16:12:52 +00:00
Hauke Mehrtens
2ea959650e ep93xx: add support for kernel 3.14
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43795
2014-12-29 13:55:59 +00:00
Hauke Mehrtens
469e8adbac kernel: add some missing config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43794
2014-12-29 11:59:32 +00:00
Felix Fietkau
1403ce960c tools: build libtool after autoconf, not before (fixes #18659)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43793
2014-12-28 21:55:21 +00:00
Hauke Mehrtens
f22aeccdd2 ipq806x: refresh patches
This makes the patchs apply again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43792
2014-12-28 19:31:40 +00:00
Imre Kaloz
c9e5aa0c17 upgrade to new rev, fixes possible compile error
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43791
2014-12-28 14:45:27 +00:00
Felix Fietkau
beb4318bc3 ath10k: fix tx rate selection for ad-hoc mode with HT
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43790
2014-12-27 13:37:32 +00:00
Felix Fietkau
0f0460afda oxnas: re-enable ubifs
After the changes make ubinize.cfg optional in image.mk, ubifs
generation can now safely be enabled again.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43789
2014-12-27 13:03:26 +00:00
Felix Fietkau
f22b382485 image.mk: make ubinize.cfg optional
When using UbinizeImage with ubifs rootfs, ubinize.cfg is no longer
needed. Yet, the absance of ubinize.cfg would make the build process
abort with an error.
Fix that by checking if ubinize.cfg is present and do no not call the
"classic" ubinize image generation if it isn't.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[missing new-line before UbinizeImage added itentionally]

SVN-Revision: 43788
2014-12-27 13:03:19 +00:00
Felix Fietkau
2ef587a8fc oxnas: clk-oxnas: rework pllb enable function
kernel lock debugging unveiled that we should not call
of_reset_control_get inside a clock's enable operation (see below)

move of_reset_control_* previously used in pllb_clk_enable to new
pllb_clk_prepare and pllb_clk_unprepare functions.
use a container to carry runtime information.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2742 lockdep_trace_alloc+0xb8/0xfc()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.26 #6
[<c001a6ac>] (unwind_backtrace) from [<c0016dec>] (show_stack+0x10/0x14)
[<c0016dec>] (show_stack) from [<c0194f68>] (dump_stack+0x7c/0x94)
[<c0194f68>] (dump_stack) from [<c0021b50>] (warn_slowpath_common+0x68/0x8c)
[<c0021b50>] (warn_slowpath_common) from [<c0021ba4>] (warn_slowpath_fmt+0x30/0x40)
[<c0021ba4>] (warn_slowpath_fmt) from [<c0061b30>] (lockdep_trace_alloc+0xb8/0xfc)
[<c0061b30>] (lockdep_trace_alloc) from [<c00cb740>] (kmem_cache_alloc+0x1c/0xf8)
[<c00cb740>] (kmem_cache_alloc) from [<c01d33c8>] (of_reset_control_get+0xe8/0x12c)
[<c01d33c8>] (of_reset_control_get) from [<c0269228>] (pllb_clk_enable+0x14/0xbc)
[<c0269228>] (pllb_clk_enable) from [<c0265738>] (__clk_enable+0x54/0xa0)
[<c0265738>] (__clk_enable) from [<c0265acc>] (clk_enable+0x18/0x2c)
[<c0265acc>] (clk_enable) from [<c04325f8>] (oxnas_pcie_probe+0x3b8/0x6a0)
[<c04325f8>] (oxnas_pcie_probe) from [<c01f2510>] (platform_drv_probe+0x18/0x48)
[<c01f2510>] (platform_drv_probe) from [<c01f1070>] (driver_probe_device+0xd8/0x24c)
[<c01f1070>] (driver_probe_device) from [<c01f1298>] (__driver_attach+0x70/0x94)
[<c01f1298>] (__driver_attach) from [<c01ef728>] (bus_for_each_dev+0x4c/0x98)
[<c01ef728>] (bus_for_each_dev) from [<c01f0818>] (bus_add_driver+0xcc/0x1e8)
[<c01f0818>] (bus_add_driver) from [<c01f169c>] (driver_register+0xa0/0xe8)
[<c01f169c>] (driver_register) from [<c01f2568>] (platform_driver_probe+0x20/0xa4)
[<c01f2568>] (platform_driver_probe) from [<c0013a3c>] (do_one_initcall+0x90/0x140)
[<c0013a3c>] (do_one_initcall) from [<c0421d38>] (kernel_init_freeable+0x1e4/0x2c0)
[<c0421d38>] (kernel_init_freeable) from [<c000c214>] (kernel_init+0x8/0x104)
[<c000c214>] (kernel_init) from [<c0008768>] (ret_from_fork+0x14/0x2c)
---[ end trace 5f17ed2f61e0683f ]---

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43787
2014-12-27 13:03:12 +00:00
Felix Fietkau
604fc8faf5 kernel/generic: fix warnings if libata-ledtrig is disabled
accidentally #if was used instead of #ifdef, thus gcc warned
about CONFIG_ATA_LEDS being undefined...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43786
2014-12-27 13:02:58 +00:00
Felix Fietkau
f38436f607 binutils: run install twice instead of overwriting the final toolchain with the initial one
fixes compiler error after a binutils rebuild/reinstall without
rebuilding the rest of the toolchain

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43785
2014-12-27 13:00:09 +00:00
Felix Fietkau
9a46799804 build: use gcc-provided ar, nm and ranlib where appropriate
Since GCC 4.7, GCC provides its own wrappers around ar, nm and ranlib, which
should be used for builds with link-time optimization. Since GCC 4.9, using them
actually necessary for LTO builds using convenience libraries to succeed.

There are some packages which try to automatically detect if gcc-{ar,nm,ranlib}
exist (one example is my package "fastd" in the package repository, which tries
to use LTO). This breaks because the OpenWrt build system explicitly sets the
binutils versions of these tools.

As it doesn't cause any issues to use gcc-{ar,nm,ranlib} instead of
{ar,nm,ranlib} even without LTO, this patch just makes OpenWrt use the
GCC-provided versions by default, which fixes the build of such packages with
GCC 4.9.

(I know that builds fail though when clang is used with -flto and
gcc-{ar,nm,ranlib}, but as all OpenWrt toolchains are based on GCC, this isn't
a real issue.)

Completely cleaning the tree (or at least `make clean toolchain/clean`) is
necessary to get a consistent state after the binutils plugins support patch and
this one (as trying to use gcc-{ar,nm,ranlib} with a binutils built without
plugin support will definitely lead to a build failure).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 43784
2014-12-27 12:59:59 +00:00
Felix Fietkau
7d808a325d binutils: enable plugin support
--enable-plugin is necessary for gcc-ar, gcc-nm and gcc-ranlib to work, which
must be used with GCC 4.9 for LTO to work.

Without this option, gcc-ar etc. will just fail with

    sorry - this program has been built without plugin support

Using the normal ar from binutils with GCC 4.9 and -flto will cause linking
with static "convenience" libraries to fail.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 43783
2014-12-27 12:59:53 +00:00
Felix Fietkau
b2de18bea4 hostapd: add support for configuring supported rates
patch by Wilco Baan Hofman from #18627

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43782
2014-12-27 12:59:47 +00:00
Imre Kaloz
edbb903461 fix mvneta vlan tagging
This is a 3.14.x backport of:
"mvneta: Fix TSO and checksum for non-acceleration vlan traffic"

Upstream commits:

817dbfa5d1bc276a72c1a577310382008e8aca0a
2d39d120781a5770573dc6ed672a5a562f541aea

Fixes vlan tagging on SoC interfaces for the WRT1900AC.  Useful
when using mvsw6171 driver.

Signed-off-by: Mark Milburn <mark.a.milburn@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43781
2014-12-26 14:48:33 +00:00
Imre Kaloz
9038e8d248 don't copy initramfs.elf unconditionally
targets that need it should do it in their image Makefile

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43780
2014-12-26 14:31:45 +00:00
Imre Kaloz
e23b988bf5 only call UbinizeImage and BuildSysUpgrade for boards we support them on
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43779
2014-12-26 13:45:18 +00:00
Imre Kaloz
f3755f5758 The ubinized filesystems should be used for generating the final images, so store them in KDIR instead.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43778
2014-12-26 13:33:22 +00:00
Felix Fietkau
fa3cb9fa5c ar71xx: add flush reset register writes, should fix restart issues (#17839)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43777
2014-12-26 12:36:38 +00:00
Felix Fietkau
a96afecf5c kernel: backport a few PHY layer fixes from upstream
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43776
2014-12-26 12:36:30 +00:00
Felix Fietkau
d7320d2d89 ar71xx: rename/refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43775
2014-12-26 12:36:22 +00:00
Imre Kaloz
5744500ab6 we've changed places with Luka, reflect that :)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43774
2014-12-25 22:34:15 +00:00
Imre Kaloz
2bff4ca7b1 use mwlwifi by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43773
2014-12-25 22:29:29 +00:00
Imre Kaloz
08b592673a Marvell 88W8864 open source mac80211 driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43772
2014-12-25 22:26:43 +00:00
Steven Barth
4746ffd7a6 netifd: minor fixes, add mldversion option
thanks to Hans Dedecker

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43771
2014-12-23 13:34:04 +00:00
Felix Fietkau
ff3464eb30 mac80211: fix HT mode selection for ad-hoc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43769
2014-12-22 21:46:38 +00:00
Felix Fietkau
93192e65e8 oxnas: sata_oxnas: make irq handler more readable
safed one level of indention by using 'continue' instead of a
lengthy if-clause.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v2: use logic-AND instead of '?' operator when checking for hw bug 6320

SVN-Revision: 43768
2014-12-22 20:47:10 +00:00
Felix Fietkau
74a9e1c1b0 oxnas: sata_oxnas: refactoring phase 2
- replaced // comments by /* comments */
 - added line-breaks where needed
 - fixed white-space according to kernel style
 - fixed some obvious spelling mistakes in comments and printks
 - removed some unneeded left-overs imported from vendor code-base
 - replaced printk(...) by libata macros where possible

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43767
2014-12-22 20:47:01 +00:00
Felix Fietkau
feda47451f oxnas: sata_oxnas: refactoring phase 1
locking for 2nd port and hwraid was added from vendor's GPL code which
doesn't comply with current kernel coding style.

 - moved all global variables into host_priv
 - renamed locks
 - sanetized acquire() and release() parameter list

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43766
2014-12-22 20:46:49 +00:00
Felix Fietkau
3113bf4cb8 oxnas: refresh kernel config-3.1[48]
and no longer compile-in ext4 filesystem now that sata_oxnas is
also built as a module.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43765
2014-12-22 20:46:41 +00:00
Felix Fietkau
5506420980 kernel: remove openwrt micrel.c (replaced by upstream driver)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43762
2014-12-22 14:37:07 +00:00
Felix Fietkau
7d6a749278 ubi-utils: add mirror md5sum
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43761
2014-12-22 14:32:41 +00:00
Felix Fietkau
a6d9d70aa0 tools/mtd-utils: add mirror md5sum
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43760
2014-12-22 13:52:58 +00:00
Steven Barth
d945d7d647 dnsmasq: also add the actual patches...
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43759
2014-12-22 09:52:19 +00:00
Steven Barth
1472eaec65 dnsmasq: backport some dnssec fixes
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43758
2014-12-22 09:51:22 +00:00
Felix Fietkau
570fe5c662 kernel: disable soft-reset for generic PHY devices to avoid accidentally clearing preinitialized state
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43757
2014-12-20 15:26:38 +00:00
Felix Fietkau
c12ac30870 buffalo-enc: pass the longstate option to decryption
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43756
2014-12-20 15:26:31 +00:00
Felix Fietkau
8e8437103c buffalo-enc: accept the longstate command line option
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43755
2014-12-20 15:26:25 +00:00
Rafał Miłecki
e7d7f59171 bcm53xx: support WAN connected to switch port 0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43754
2014-12-20 15:09:01 +00:00
Luka Perkov
0847247129 mvsw6171: note support for 88E6172 switches
The '6171 and '6172 are similar enough to work
without any changes to the code.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43753
2014-12-19 22:02:59 +00:00
Luka Perkov
873202fc0b kirkwood: add *plugs to uci-defaults
Set defaults health led to a timer heartbeet (200/800)
and populate network for:

- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43752
2014-12-19 11:05:13 +00:00
Luka Perkov
39743e45f8 kikwood: populate kirkwood.sh with new boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43751
2014-12-18 18:38:43 +00:00
Luka Perkov
ec9a0f898a kirkwood: set default EA4500 switch config
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43750
2014-12-18 18:38:38 +00:00
Hauke Mehrtens
abca0462d3 kernel: bgmac: fix some problems
There are some problems in the napi usage that are fixed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43749
2014-12-18 16:25:22 +00:00
Hauke Mehrtens
192e945479 bcm53xx: PCIe: add link check again
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43748
2014-12-18 16:23:42 +00:00
Luka Perkov
180c1f3302 uboot-envtools: add more kirkwood boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43747
2014-12-18 15:53:46 +00:00
Felix Fietkau
4ccf215a3e ar7: remove leftover 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43746
2014-12-18 11:57:42 +00:00
Felix Fietkau
0e035381dc binutils: break-out libbfd, libopcodes and ar
Package libbfd, libopcodes and ar seperately.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43745
2014-12-18 11:57:36 +00:00