Commit graph

786 commits

Author SHA1 Message Date
Hauke Mehrtens
5caee877dc brcm47xx: increase max image size
the trx utile uses a maximum image size of 7.2MB. There are brcm47xx
devices even with serial flash with bigger flash chips, but OpenWrt was
not able to create images for these devices. This patch provides an
additional parameter which increases this limit to 32 MB. There is a
warning in the trx utile code which suggests that bigger images could
overwrite the nvram partition on some devices, but normally the program
writing the image should make sure that it is safe to write it to the
flash.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46872
2015-09-11 17:55:28 +00:00
Hauke Mehrtens
c9bebfb9ce brcm47xx: break long lines in image Makefile
This patch changes nothing on the behaviour, it just breaks long lines
with bin/trx to make it easier to add additional parameters.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46871
2015-09-11 17:54:55 +00:00
Rafał Miłecki
bda4c3d5e5 brcm47xx: apply serial flash size trick to Netgear WNR1000 V3
It also uses different block size just like WGR614 V10.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46810
2015-09-08 05:24:57 +00:00
Rafał Miłecki
d2a9c35af0 brcm47xx: fix reading WGT634U CFE variables with 4.1
This ports fix from r46584 to the 4.1.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46806
2015-09-07 16:43:29 +00:00
Rafał Miłecki
da2178eb7e brcm47xx: add Netgear WNR1000 V3 support in the Linux arch code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46805
2015-09-07 16:29:21 +00:00
Jonas Gorski
7d6cff4882 kernel: update 3.18 to 3.18.21
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46768
2015-09-02 10:18:15 +00:00
Jonas Gorski
f5601a97a2 brcm47xx: disable the openwrt commandline hack
We don't make use of it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46756
2015-08-30 12:17:57 +00:00
Rafał Miłecki
a9559efe43 brcm47xx: fix Linksys E1200 V2 image filename
Drop unwanted suffix (copy & paste mistake).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46742
2015-08-29 09:23:19 +00:00
Jonas Gorski
2d379e796f kernel: update 4.1 to 4.1.6
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46713
2015-08-23 18:06:11 +00:00
Jonas Gorski
6be2305da8 kernel: update 4.1 to 4.1.5
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.5

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46598
2015-08-14 13:06:33 +00:00
Jonas Gorski
4ecae78c16 image.mk: replace all Build/netgear-chk with a generic implementation
Instead of letting each target define it themselves, create on in
include/image.mk and let the targets use it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46596
2015-08-14 13:05:14 +00:00
Jonas Gorski
bee065262a brcm47xx: prefix netgear specific device variables with NETGEAR_
Rename BOARD_ID to NETGEAR_BOARD_ID and REGION to NETGEAR_REGION.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46594
2015-08-14 13:04:22 +00:00
Rafał Miłecki
4561cc2cca brcm47xx: fix reading WGT634U CFE variables
We got check for nvram_len placed too early and the code never tried
reading CFE variables used on WGT634U. This is a regression introduced
in r45942 and reported in #20291.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46584
2015-08-12 13:29:22 +00:00
Hauke Mehrtens
b5b630ae38 brcm47xx: add support for kernel 4.1
This adds support for kernel 4.1 and removes kernel 4.0.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46166
2015-07-03 23:18:33 +00:00
Jonas Gorski
0f5b1a3eca kernel: update 4.0 to 4.0.5
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.5

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46063
2015-06-19 11:12:43 +00:00
Jonas Gorski
9a59b350b7 kernel: update 3.18 to 3.18.16
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
Rafał Miłecki
b273bb1896 brcm47xx: backport BCM47XX patches (NVRAM & BCMA_HOST_PCI)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45942
2015-06-10 19:52:07 +00:00
Rafał Miłecki
bd150495bb brcm47xx: refresh kernel config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45921
2015-06-07 10:09:10 +00:00
Rafał Miłecki
46bc3ed25a brcm47xx: sysupgrade: drop useless shift in platform.sh
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45913
2015-06-06 17:25:57 +00:00
Rafał Miłecki
fc0776f2c7 brcm47xx: backport MIPS BCM47XX changes queued for 4.2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45906
2015-06-05 20:41:18 +00:00
John Crispin
0da6f8a52b brcm47xx: extract TRX from image on the fly
Extracting TRX to separated file in /tmp/ requires extra RAM which may
not be available on some chepaer devices. Instead of that lets pass a
proper extracting command to the default_do_upgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45901
2015-06-05 14:12:15 +00:00
Rafał Miłecki
6bc9e00e94 kernel: backport ssb fix for WRT350N v1 (BCM4705) reboots
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45865
2015-06-01 06:11:26 +00:00
Rafał Miłecki
92ebd6fdbe brcm47xx: image: fix typo in Asus WL-500gP v2 fw file name
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45811
2015-05-28 19:53:59 +00:00
Rafał Miłecki
ebd651ad99 brcm47xx: add LEDs/buttos for Asus N10U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45797
2015-05-28 08:08:17 +00:00
Rafał Miłecki
a5000c0af6 brcm47xx: drop 4.0 patch that is in 4.0.4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45796
2015-05-28 08:08:11 +00:00
Rafał Miłecki
69aefc771f brcm47xx: build images for Asus devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45789
2015-05-27 15:37:05 +00:00
Jo-Philipp Wich
048f46a075 brcm47xx: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45779
2015-05-27 15:04:02 +00:00
Rafał Miłecki
f08a10f2b9 brcm47xx: build image for Asus RT-N66U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45774
2015-05-27 13:54:19 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Rafał Miłecki
501da07c5d brcm47xx: fix regression in NVRAM support for WGT634U
We were calculating wrong offset, NVRAM wasn't found and OpenWrt didn't
boot.

Fixes: 9019803 ("brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)")
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45618
2015-05-06 05:54:19 +00:00
Rafał Miłecki
8d1580c4bb brcm47xx: add patches for kernel 4.0
SVN-Revision: 45570
2015-04-23 11:31:54 +00:00
Rafał Miłecki
9c02b23a77 brcm47xx: add buttons support for WRT310N v2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45474
2015-04-17 08:12:00 +00:00
Rafał Miłecki
b12e85a451 brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45472
2015-04-17 05:45:46 +00:00
Rafał Miłecki
e85294a957 brcm47xx: rework vendor fw handling to don't duplicate upgrade calls
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45470
2015-04-16 21:43:27 +00:00
Rafał Miłecki
c8eed9a50a brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected.  The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2.  Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45469
2015-04-16 21:20:37 +00:00
Felix Fietkau
83e31eb7e7 bcm53xx: add USB 2.0 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
Rafał Miłecki
3cb8bf44e6 otrx: change command line API to start with a mode
This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
Luka Perkov
b66b0ae632 brcm47xx: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45374
2015-04-11 10:28:11 +00:00
Rafał Miłecki
c6f9582116 brcm47xx: image: use "-" separator for device version
This makes legacy subtarget follow two other.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45319
2015-04-09 05:40:37 +00:00
Rafał Miłecki
a8b0e75291 brcm47xx: verify also standard TRX images during sysupgrade
It allows detecting data corruption for plain TRX as well.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45318
2015-04-09 05:36:16 +00:00
Rafał Miłecki
3fad95446a brcm47xx: fix WRT300N devices magics for sysupgrade check
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45317
2015-04-09 05:22:10 +00:00
Rafał Miłecki
44b128b0aa brcm47xx: switch to the otrx for verifying TRX images
This adds checking CRC32 of provided firmware image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45316
2015-04-09 05:22:04 +00:00
Rafał Miłecki
80971cd0f9 brcm47xx: image: use new (& fixed) FILESYSTEM variable for trx command
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45313
2015-04-08 09:50:57 +00:00
Rafał Miłecki
705651884d brcm47xx: update legacy subtarget description
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45310
2015-04-08 05:55:32 +00:00
Rafał Miłecki
7798074429 brcm47xx: add fix "Data bus error" on CardBus ssb SoCs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45308
2015-04-08 05:09:42 +00:00
Rafał Miłecki
1d2abb6f16 brcm47xx: reverse 2 LEDs polarity on WRT320N v1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45307
2015-04-08 04:46:27 +00:00
Rafał Miłecki
95f7fb8f49 brcm47xx: define rest of LEDs & buttons for WRT320N
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45304
2015-04-07 21:31:36 +00:00
Rafał Miłecki
503d845522 brcm47xx: drop old patch disabling cardbus mode on Netgear WNR834B
First of all this patch was affecting other devices, not just Netgear
WNR834B. E.g. Linksys WRT300N v1 also has boardtype 0x0472.
This was breaking PCI on WRT300N, ssb couldn't detect core working in
hostmode (due to mips_busprobe32 failing).

Secondly this patch should not be needed for years now. From the analyze
of #8861 it seems it was needed just to make devices at slots other than
0 discoverable. Setting cardbus to 0 was simply making ssb allow access
to PCI config for devices other than bridge.
With the upstream commit a6c8462 (ssb: fix cardbus slot in hostmode) we
allow accessing device at slot 1 which should be enough for CardBus.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45293
2015-04-07 15:40:51 +00:00
Rafał Miłecki
e2b59e4dbc brcm47xx: detect Linksys WRT320N v1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45289
2015-04-07 13:08:17 +00:00
Rafał Miłecki
9f740ddc0d brcm47xx: backport MIPS BCM47XX patches queued for 4.1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45288
2015-04-07 12:54:23 +00:00