brcm47xx: drop 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45374
This commit is contained in:
Luka Perkov 2015-04-11 10:28:11 +00:00
parent fc08d7a3eb
commit b66b0ae632
40 changed files with 0 additions and 3848 deletions

View file

@ -1,168 +0,0 @@
CONFIG_ADM6996_PHY=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_B53=y
# CONFIG_B53_MMAP_DRIVER is not set
CONFIG_B53_PHY_DRIVER=y
CONFIG_B53_PHY_FIXUP=y
# CONFIG_B53_SRAB_DRIVER is not set
CONFIG_BCM47XX=y
CONFIG_BCM47XX_BCMA=y
CONFIG_BCM47XX_SSB=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_SFLASH=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
# CONFIG_CPU_BMIPS is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPSR1=y
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_WDT=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ_PERIODIC=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_LEDS_GPIO_REGISTER=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_BCM47XXSFLASH=y
CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_SM_COMMON is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_EXCEPT_FILL=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SSB=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_EXTIF=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_SSB_DRIVER_MIPS=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_EMBEDDED=y
CONFIG_SSB_PCICORE_HOSTMODE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_SERIAL=y
CONFIG_SSB_SFLASH=y
CONFIG_SSB_SPROM=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_BMIPS=y
CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_USB_SUPPORT=y
CONFIG_WATCHDOG_CORE=y
CONFIG_ZONE_DMA_FLAG=0

View file

@ -1,34 +0,0 @@
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -93,6 +93,7 @@ static int bcm47xxpart_parse(struct mtd_
int trx_part = -1;
int last_trx_part = -1;
int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
+ bool found_nvram = false;
if (blocksize <= 0x10000)
blocksize = 0x10000;
@@ -280,12 +281,23 @@ static int bcm47xxpart_parse(struct mtd_
if (buf[0] == NVRAM_HEADER) {
bcm47xxpart_add_part(&parts[curr_part++], "nvram",
master->size - blocksize, 0);
+ found_nvram = true;
break;
}
}
kfree(buf);
+ if (!found_nvram) {
+ pr_err("can not find a nvram partition reserve last block\n");
+ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
+ master->size - blocksize * 2, MTD_WRITEABLE);
+ for (i = 0; i < curr_part; i++) {
+ if (parts[i].size + parts[i].offset == master->size)
+ parts[i].offset -= blocksize * 2;
+ }
+ }
+
/*
* Assume that partitions end at the beginning of the one they are
* followed by.

View file

@ -1,78 +0,0 @@
From 1f3e1c682a0b5273e3ee8799b54319971f426e6a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 29 Jan 2014 18:06:52 +0100
Subject: [RFC V2][PATCH] MIPS: BCM47XX: Add new file for device specific workarounds
---
V2: Drop pr_debug for devices we don't need workarounds for. It was too
load and not useful at all.
---
arch/mips/bcm47xx/Makefile | 2 +-
arch/mips/bcm47xx/bcm47xx_private.h | 3 +++
arch/mips/bcm47xx/setup.c | 1 +
arch/mips/bcm47xx/workarounds.c | 25 +++++++++++++++++++++++++
4 files changed, 30 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/bcm47xx/workarounds.c
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,4 +4,4 @@
#
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-y += board.o buttons.o leds.o
+obj-y += board.o buttons.o leds.o workarounds.o
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -9,4 +9,7 @@ int __init bcm47xx_buttons_register(void
/* leds.c */
void __init bcm47xx_leds_register(void);
+/* workarounds.c */
+void __init bcm47xx_workarounds(void);
+
#endif
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -286,6 +286,7 @@ static int __init bcm47xx_register_bus_c
}
bcm47xx_buttons_register();
bcm47xx_leds_register();
+ bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
return 0;
--- /dev/null
+++ b/arch/mips/bcm47xx/workarounds.c
@@ -0,0 +1,31 @@
+#include "bcm47xx_private.h"
+
+#include <linux/gpio.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx.h>
+
+static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
+{
+ const int usb_power = 12;
+ int err;
+
+ err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
+ if (err)
+ pr_err("Failed to request USB power gpio: %d\n", err);
+ else
+ gpio_free(usb_power);
+}
+
+void __init bcm47xx_workarounds(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
+ bcm47xx_workarounds_netgear_wnr3500l();
+ break;
+ default:
+ /* No workaround(s) needed */
+ break;
+ }
+}

View file

@ -1,39 +0,0 @@
From b09189336f6d974c554aed03b4651e9f68ce0abd Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 23 Feb 2014 16:38:29 +0100
Subject: [PATCH 3/6] MIPS: BCM47XX: detect some more Linksys devices
The Linksys WRT54G/GS/GL family uses the same boardtype numbers, and
the same gpio configuration. The boardtype numbers are changing with
the hardware versions, but these hardware numbers are different or each
model.
Detect them all as one device, this also worked in OpenWrt.
---
arch/mips/bcm47xx/board.c | 4 +++-
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 2 +-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -176,7 +176,9 @@ struct bcm47xx_board_type_list3 bcm47xx_
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
- {{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
{ {0}, NULL},
};
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -66,7 +66,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT310NV1,
BCM47XX_BOARD_LINKSYS_WRT310NV2,
BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- BCM47XX_BOARD_LINKSYS_WRT54GSV1,
+ BCM47XX_BOARD_LINKSYS_WRT54G,
BCM47XX_BOARD_LINKSYS_WRT610NV1,
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,

View file

@ -1,133 +0,0 @@
From e3d15471f1be2bd2fd4db82907ad4b2d74ec2636 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 10 Jan 2014 23:55:28 +0100
Subject: [PATCH 4/6] MIPS: BCM47XX: add button and led configuration for some
Linksys devices
This adds led and button GPIO configuration for Linksys wrt54g3gv2,
wrt54gsv1 and wrtsl54gs. This is based on OpenWrt broadcom-diag code.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/buttons.c | 27 +++++++++++++++++++++++++++
arch/mips/bcm47xx/leds.c | 33 +++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -259,6 +259,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
};
static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WIMAX),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt54gsv1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_linksys_wrt610nv1[] __initconst = {
BCM47XX_GPIO_KEY(6, KEY_RESTART),
BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
@@ -270,6 +282,12 @@ bcm47xx_buttons_linksys_wrt610nv2[] __in
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrtsl54gs[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
/* Motorola */
static const struct gpio_keys_button
@@ -479,12 +497,21 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54gsv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
break;
case BCM47XX_BOARD_LINKSYS_WRT610NV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRTSL54GS:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
+ break;
case BCM47XX_BOARD_MOTOROLA_WE800G:
err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -292,6 +292,21 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
};
static const struct gpio_led
+bcm47xx_leds_linksys_wrt54gsv1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54g3gv2[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "green", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "blue", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -308,6 +323,15 @@ bcm47xx_leds_linksys_wrt610nv2[] __initc
BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
};
+static const struct gpio_led
+bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
/* Motorola */
static const struct gpio_led
@@ -502,12 +526,21 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54gsv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
break;
case BCM47XX_BOARD_LINKSYS_WRT610NV2:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRTSL54GS:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
+ break;
case BCM47XX_BOARD_MOTOROLA_WE800G:
bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);

View file

@ -1,89 +0,0 @@
From c546fa49901252cbc1e4046d7188858b2f9e130f Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 10 Jan 2014 23:55:43 +0100
Subject: [PATCH 2/2] MIPS: BCM47XX: add detection and GPIO config for Siemens
SE505v2
This adds board detection for the Siemens SE505v2 and the led gpio
configuration. This board does not have any buttons.
This is based on OpenWrt broadcom-diag and Manuel Munz's nvram dump.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/board.c | 17 +++++++++++++++++
arch/mips/bcm47xx/leds.c | 12 ++++++++++++
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 2 ++
3 files changed, 31 insertions(+)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -182,6 +182,13 @@ struct bcm47xx_board_type_list3 bcm47xx_
{ {0}, NULL},
};
+/* boardtype, boardrev */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_board_type_rev[] __initconst = {
+ {{BCM47XX_BOARD_SIEMENS_SE505V2, "Siemens SE505 V2"}, "0x0101", "0x10"},
+ { {0}, NULL},
+};
+
static const
struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
{BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
@@ -275,6 +282,16 @@ static __init const struct bcm47xx_board
return &e3->board;
}
}
+
+ if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
+ bcm47xx_nvram_getenv("boardrev", buf2, sizeof(buf2)) >= 0 &&
+ bcm47xx_nvram_getenv("boardnum", buf3, sizeof(buf3)) == -ENOENT) {
+ for (e2 = bcm47xx_board_list_board_type_rev; e2->value1; e2++) {
+ if (!strcmp(buf1, e2->value1) &&
+ !strcmp(buf2, e2->value2))
+ return &e2->board;
+ }
+ }
return bcm47xx_board_unknown;
}
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -383,6 +383,14 @@ bcm47xx_leds_netgear_wnr834bv2[] __initc
BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Siemens */
+static const struct gpio_led
+bcm47xx_leds_siemens_se505v2[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
/* SimpleTech */
static const struct gpio_led
@@ -562,6 +570,10 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
break;
+ case BCM47XX_BOARD_SIEMENS_SE505V2:
+ bcm47xx_set_pdata(bcm47xx_leds_siemens_se505v2);
+ break;
+
case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -94,6 +94,8 @@ enum bcm47xx_board {
BCM47XX_BOARD_PHICOMM_M1,
+ BCM47XX_BOARD_SIEMENS_SE505V2,
+
BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
BCM47XX_BOARD_ZTE_H218N,

View file

@ -1,77 +0,0 @@
From 44927df87162ae9beb6e7b934b0e75818b88e350 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Thu, 2 Jan 2014 19:10:05 +0100
Subject: [PATCH] MIPS: BCM47XX: add Belkin F7Dxxxx board detection
From: Cody P Schafer <devel@codyps.com>
Add a few Belkin F7Dxxxx entries, with F7D4401 sourced from online
documentation and the "F7D7302" being observed. F7D3301, F7D3302, and
F7D4302 are reasonable guesses which are unlikely to cause
mis-detection.
Signed-off-by: Cody P Schafer <devel@codyps.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/board.c | 4 ++++
arch/mips/bcm47xx/buttons.c | 4 ++++
arch/mips/bcm47xx/leds.c | 4 ++++
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 4 ++++
4 files changed, 16 insertions(+)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -72,7 +72,11 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"},
{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
+ {{BCM47XX_BOARD_BELKIN_F7D3301, "Belkin F7D3301"}, "F7D3301"},
+ {{BCM47XX_BOARD_BELKIN_F7D3302, "Belkin F7D3302"}, "F7D3302"},
{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
+ {{BCM47XX_BOARD_BELKIN_F7D4302, "Belkin F7D4302"}, "F7D4302"},
+ {{BCM47XX_BOARD_BELKIN_F7D4401, "Belkin F7D4401"}, "F7D4401"},
{ {0}, NULL},
};
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -420,7 +420,11 @@ int __init bcm47xx_buttons_register(void
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd);
break;
+ case BCM47XX_BOARD_BELKIN_F7D3301:
+ case BCM47XX_BOARD_BELKIN_F7D3302:
case BCM47XX_BOARD_BELKIN_F7D4301:
+ case BCM47XX_BOARD_BELKIN_F7D4302:
+ case BCM47XX_BOARD_BELKIN_F7D4401:
err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301);
break;
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -457,7 +457,11 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd);
break;
+ case BCM47XX_BOARD_BELKIN_F7D3301:
+ case BCM47XX_BOARD_BELKIN_F7D3302:
case BCM47XX_BOARD_BELKIN_F7D4301:
+ case BCM47XX_BOARD_BELKIN_F7D4302:
+ case BCM47XX_BOARD_BELKIN_F7D4401:
bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -27,7 +27,11 @@ enum bcm47xx_board {
BCM47XX_BOARD_ASUS_WL700GE,
BCM47XX_BOARD_ASUS_WLHDD,
+ BCM47XX_BOARD_BELKIN_F7D3301,
+ BCM47XX_BOARD_BELKIN_F7D3302,
BCM47XX_BOARD_BELKIN_F7D4301,
+ BCM47XX_BOARD_BELKIN_F7D4302,
+ BCM47XX_BOARD_BELKIN_F7D4401,
BCM47XX_BOARD_BUFFALO_WBR2_G54,
BCM47XX_BOARD_BUFFALO_WHR2_A54G54,

View file

@ -1,40 +0,0 @@
From 26db431400c336c4cc658cb4888bab18d254c64a Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 9 Aug 2014 00:00:09 +0200
Subject: [PATCH] MIPS: BCM47XX: fix reboot problem on BCM4705/BCM4785
This adds some code based on code from the Broadcom GPL tar to fix the
reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10
times and have never seen a problem. This reverts the changes in the
previous commit and adds the real fix as suggested by Rafał.
Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into
async mode.
The previous try was this:
commit 316cad5c1d4daee998cd1f83ccdb437f6f20d45c
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Mon Jul 28 23:53:57 2014 +0200
MIPS: BCM47XX: make reboot more relaiable
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -59,7 +59,16 @@ static void bcm47xx_machine_restart(char
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
+ if (bcm47xx_bus.ssb.chip_id == 0x4785)
+ write_c0_diag4(1 << 22);
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ if (bcm47xx_bus.ssb.chip_id == 0x4785) {
+ __asm__ __volatile__(
+ ".set\tmips3\n\t"
+ "sync\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+ }
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA

View file

@ -1,95 +0,0 @@
From 103c0bf3ff46486466bc9138d70c25133d516003 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Tue, 29 Jul 2014 00:08:01 +0200
Subject: [PATCH] MIPS: BCM47XX: fixup broken MAC addresses in nvram
The address prefix 00:90:4C is used by Broadcom in their initial
configuration. When a mac address with the prefix 00:90:4C is used all
devices from the same series are sharing the same mac address. To
prevent mac address collisions we replace them with a mac address based
on the base address. To generate such addresses we take the main mac
address from et0macaddr and increase it by two for the first wifi
device and by 3 for the second one. This matches the printed mac
address on the device. The main mac address increased by one is used as
wan address by the vendor code.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: zajec5@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7489/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/sprom.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -28,6 +28,8 @@
#include <bcm47xx.h>
#include <bcm47xx_nvram.h>
+#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
static void create_key(const char *prefix, const char *postfix,
const char *name, char *buf, int len)
@@ -631,6 +633,33 @@ static void bcm47xx_fill_sprom_path_r45(
}
}
+static bool bcm47xx_is_valid_mac(u8 *mac)
+{
+ return mac && !(mac[0] == 0x00 && mac[1] == 0x90 && mac[2] == 0x4c);
+}
+
+static int bcm47xx_increase_mac_addr(u8 *mac, u8 num)
+{
+ u8 *oui = mac + ETH_ALEN/2 - 1;
+ u8 *p = mac + ETH_ALEN - 1;
+
+ do {
+ (*p) += num;
+ if (*p > num)
+ break;
+ p--;
+ num = 1;
+ } while (p != oui);
+
+ if (p == oui) {
+ pr_err("unable to fetch mac address\n");
+ return -ENOENT;
+ }
+ return 0;
+}
+
+static int mac_addr_used = 2;
+
static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
@@ -648,6 +677,25 @@ static void bcm47xx_fill_sprom_ethernet(
nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
+
+ /* The address prefix 00:90:4C is used by Broadcom in their initial
+ configuration. When a mac address with the prefix 00:90:4C is used
+ all devices from the same series are sharing the same mac address.
+ To prevent mac address collisions we replace them with a mac address
+ based on the base address. */
+ if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
+ u8 mac[6];
+
+ nvram_read_macaddr(NULL, "et0macaddr", mac, false);
+ if (bcm47xx_is_valid_mac(mac)) {
+ int err = bcm47xx_increase_mac_addr(mac, mac_addr_used);
+
+ if (!err) {
+ ether_addr_copy(sprom->il0mac, mac);
+ mac_addr_used++;
+ }
+ }
+ }
}
static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,

View file

@ -1,170 +0,0 @@
From 250dc03727b9cce91bd86091f05bf2443e2be9ec Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Tue, 29 Jul 2014 00:12:09 +0200
Subject: [PATCH] MIPS: BCM47XX: add Microsoft MN-700 and Asus WL500G
This patch adds detection for the Microsoft MN-700 and the Asus WL500G
router. This is based on some old code from OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: zajec5@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7490/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/board.c | 17 +++++++++++++++++
arch/mips/bcm47xx/buttons.c | 19 +++++++++++++++++++
arch/mips/bcm47xx/leds.c | 19 +++++++++++++++++++
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 3 +++
4 files changed, 58 insertions(+)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -80,6 +80,14 @@ struct bcm47xx_board_type_list1 bcm47xx_
{ {0}, NULL},
};
+/* hardware_version, boardnum */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_hw_version_num[] __initconst = {
+ {{BCM47XX_BOARD_MICROSOFT_MN700, "Microsoft MN-700"}, "WL500-", "mn700"},
+ {{BCM47XX_BOARD_ASUS_WL500G, "Asus WL500G"}, "WL500-", "asusX"},
+ { {0}, NULL},
+};
+
/* productid */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
@@ -237,6 +245,15 @@ static __init const struct bcm47xx_board
}
}
+ if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0 &&
+ bcm47xx_nvram_getenv("boardtype", buf2, sizeof(buf2)) >= 0) {
+ for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
+ if (!strstarts(buf1, e2->value1) &&
+ !strcmp(buf2, e2->value2))
+ return &e2->board;
+ }
+ }
+
if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) {
if (!strcmp(buf1, e1->value1))
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -56,6 +56,11 @@ bcm47xx_buttons_asus_wl330ge[] __initcon
};
static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500g[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_asus_wl500gd[] __initconst = {
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
@@ -288,6 +293,13 @@ bcm47xx_buttons_linksys_wrtsl54gs[] __in
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
+/* Microsoft */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_microsoft_nm700[] __initconst = {
+ BCM47XX_GPIO_KEY(7, KEY_RESTART),
+};
+
/* Motorola */
static const struct gpio_keys_button
@@ -395,6 +407,9 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_ASUS_WL330GE:
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl330ge);
break;
+ case BCM47XX_BOARD_ASUS_WL500G:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500g);
+ break;
case BCM47XX_BOARD_ASUS_WL500GD:
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gd);
break;
@@ -517,6 +532,10 @@ int __init bcm47xx_buttons_register(void
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
break;
+ case BCM47XX_BOARD_MICROSOFT_MN700:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_microsoft_nm700);
+ break;
+
case BCM47XX_BOARD_MOTOROLA_WE800G:
err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
break;
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -64,6 +64,11 @@ bcm47xx_leds_asus_wl330ge[] __initconst
};
static const struct gpio_led
+bcm47xx_leds_asus_wl500g[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
bcm47xx_leds_asus_wl500gd[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
};
@@ -332,6 +337,13 @@ bcm47xx_leds_linksys_wrtsl54gs[] __initc
BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Microsoft */
+
+static const struct gpio_led
+bcm47xx_leds_microsoft_nm700[] __initconst = {
+ BCM47XX_GPIO_LED(6, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+};
+
/* Motorola */
static const struct gpio_led
@@ -432,6 +444,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_ASUS_WL330GE:
bcm47xx_set_pdata(bcm47xx_leds_asus_wl330ge);
break;
+ case BCM47XX_BOARD_ASUS_WL500G:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500g);
+ break;
case BCM47XX_BOARD_ASUS_WL500GD:
bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gd);
break;
@@ -554,6 +569,10 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
break;
+ case BCM47XX_BOARD_MICROSOFT_MN700:
+ bcm47xx_set_pdata(bcm47xx_leds_microsoft_nm700);
+ break;
+
case BCM47XX_BOARD_MOTOROLA_WE800G:
bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -18,6 +18,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_ASUS_WL300G,
BCM47XX_BOARD_ASUS_WL320GE,
BCM47XX_BOARD_ASUS_WL330GE,
+ BCM47XX_BOARD_ASUS_WL500G,
BCM47XX_BOARD_ASUS_WL500GD,
BCM47XX_BOARD_ASUS_WL500GPV1,
BCM47XX_BOARD_ASUS_WL500GPV2,
@@ -75,6 +76,8 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,
+ BCM47XX_BOARD_MICROSOFT_MN700,
+
BCM47XX_BOARD_MOTOROLA_WE800G,
BCM47XX_BOARD_MOTOROLA_WR850GP,
BCM47XX_BOARD_MOTOROLA_WR850GV2V3,

View file

@ -1,110 +0,0 @@
From 41a867cb07443c77c24747dcbad1a40002516469 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 20 Jun 2014 07:56:39 +0200
Subject: [PATCH] MIPS: BCM47xx: Distinguish WRT54G series devices by boardtype
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Catalin reported that GPIOs used by bcm47xx don't match layout of his
WRT54GS V1.0 board. It seems we need to distinguish these 54G* devices.
Reported-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7112/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/board.c | 6 +++---
arch/mips/bcm47xx/buttons.c | 10 ++++++----
arch/mips/bcm47xx/leds.c | 10 ++++++----
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 4 +++-
4 files changed, 18 insertions(+), 12 deletions(-)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -188,9 +188,9 @@ struct bcm47xx_board_type_list3 bcm47xx_
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
{ {0}, NULL},
};
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -270,7 +270,7 @@ bcm47xx_buttons_linksys_wrt54g3gv2[] __i
};
static const struct gpio_keys_button
-bcm47xx_buttons_linksys_wrt54gsv1[] __initconst = {
+bcm47xx_buttons_linksys_wrt54g_generic[] __initconst = {
BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
@@ -516,12 +516,14 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
break;
- case BCM47XX_BOARD_LINKSYS_WRT54G:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54gsv1);
- break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g_generic);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
break;
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -297,7 +297,7 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
};
static const struct gpio_led
-bcm47xx_leds_linksys_wrt54gsv1[] __initconst = {
+bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -553,12 +553,14 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
break;
- case BCM47XX_BOARD_LINKSYS_WRT54G:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54gsv1);
- break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -71,7 +71,9 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT310NV1,
BCM47XX_BOARD_LINKSYS_WRT310NV2,
BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- BCM47XX_BOARD_LINKSYS_WRT54G,
+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708,
BCM47XX_BOARD_LINKSYS_WRT610NV1,
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,

View file

@ -1,45 +0,0 @@
From 7bb26b1691166d0d830c42c1a25caf82208bf90d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 20 Jun 2014 07:56:40 +0200
Subject: [PATCH] MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Reported-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7113/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/leds.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -311,6 +311,14 @@ bcm47xx_leds_linksys_wrt54g3gv2[] __init
BCM47XX_GPIO_LED(3, "blue", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Verified on: WRT54GS V1.0 */
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54g_type_0101[] __initconst = {
+ BCM47XX_GPIO_LED(0, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
static const struct gpio_led
bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -557,6 +565,8 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
break;
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0101);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);

View file

@ -1,50 +0,0 @@
From c949c0bc55571209fe6742f645b1e2eb20099591 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 17 Jun 2014 16:36:50 +0200
Subject: [PATCH 149/150] MIPS: BCM47XX: Move shared symbols to the config
BCM47XX
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7100/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/Kconfig | 2 ++
arch/mips/bcm47xx/Kconfig | 4 ----
2 files changed, 2 insertions(+), 4 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -124,6 +124,8 @@ config BCM47XX
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
select EARLY_PRINTK_8250 if EARLY_PRINTK
+ select GPIOLIB
+ select LEDS_GPIO_REGISTER
help
Support for BCM47XX based boards
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -11,8 +11,6 @@ config BCM47XX_SSB
select SSB_DRIVER_PCICORE if PCI
select SSB_PCICORE_HOSTMODE if PCI
select SSB_DRIVER_GPIO
- select GPIOLIB
- select LEDS_GPIO_REGISTER
default y
help
Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -29,8 +27,6 @@ config BCM47XX_BCMA
select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
select BCMA_DRIVER_GPIO
- select GPIOLIB
- select LEDS_GPIO_REGISTER
default y
help
Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.

View file

@ -1,32 +0,0 @@
From ce01cbef8b0b71d01f8a68cba59da3198165bae6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 17 Jun 2014 16:36:51 +0200
Subject: [PATCH 150/150] MIPS: BCM47XX: Select SYS_SUPPORTS_HIGHMEM for
BCM47XX_BCMA
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It seems that bcm47xx can handle only 128 MiB of RAM directly. There
are few devices with 256 MiB, but Broadcom's SDK uses highmem to handle
anything above 128 MiB.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7101/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -20,6 +20,7 @@ config BCM47XX_SSB
config BCM47XX_BCMA
bool "BCMA Support for Broadcom BCM47XX"
select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_HIGHMEM
select CPU_MIPSR2_IRQ_VI
select BCMA
select BCMA_HOST_SOC

View file

@ -1,183 +0,0 @@
From 9194b3431616567ffbf69ef970506d695912be0b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 17 Jul 2014 23:24:30 +0200
Subject: [PATCH] MIPS: BCM47XX: Devices database update for 3.17
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Detect more devices and register leds & buttons for them.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7394/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/board.c | 3 ++-
arch/mips/bcm47xx/buttons.c | 9 ++++++++
arch/mips/bcm47xx/leds.c | 53 +++++++++++++++++++++++++++++++++++++--------
3 files changed, 55 insertions(+), 10 deletions(-)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -58,6 +58,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RTN10U"},
+ {{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RTN10D"},
{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RTN12B1"},
{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RTN12C1"},
@@ -106,7 +107,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
/* ModelId */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
- {{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565"},
+ {{BCM47XX_BOARD_DELL_TM2300, "Dell TrueMobile 2300"}, "WX-5565"},
{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -341,6 +341,12 @@ bcm47xx_buttons_netgear_wndr4500v1[] __i
};
static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_netgear_wnr834bv2[] __initconst = {
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
@@ -557,6 +563,9 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR834BV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
break;
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -35,6 +35,15 @@ bcm47xx_leds_asus_rtn12[] __initconst =
};
static const struct gpio_led
+bcm47xx_leds_asus_rtn15u[] __initconst = {
+ /* TODO: Add "wlan" LED */
+ BCM47XX_GPIO_LED(3, "blue", "wan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(4, "blue", "lan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(9, "blue", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_asus_rtn16[] __initconst = {
BCM47XX_GPIO_LED(1, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(7, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -42,8 +51,8 @@ bcm47xx_leds_asus_rtn16[] __initconst =
static const struct gpio_led
bcm47xx_leds_asus_rtn66u[] __initconst = {
- BCM47XX_GPIO_LED(12, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(15, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(12, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(15, "blue", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
};
static const struct gpio_led
@@ -221,8 +230,8 @@ bcm47xx_leds_linksys_e1000v1[] __initcon
static const struct gpio_led
bcm47xx_leds_linksys_e1000v21[] __initconst = {
- BCM47XX_GPIO_LED(5, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(6, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(5, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(7, "amber", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(8, "blue", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
};
@@ -319,6 +328,16 @@ bcm47xx_leds_linksys_wrt54g_type_0101[]
BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Verified on: WRT54GL V1.1 */
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54g_type_0467[] __initconst = {
+ BCM47XX_GPIO_LED(0, "green", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
static const struct gpio_led
bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -338,11 +357,10 @@ bcm47xx_leds_linksys_wrt610nv2[] __initc
static const struct gpio_led
bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(0, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
};
/* Microsoft */
@@ -397,6 +415,15 @@ bcm47xx_leds_netgear_wndr4500v1[] __init
};
static const struct gpio_led
+bcm47xx_leds_netgear_wnr3500lv1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "green", "wan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -437,6 +464,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_ASUS_RTN12:
bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
break;
+ case BCM47XX_BOARD_ASUS_RTN15U:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn15u);
+ break;
case BCM47XX_BOARD_ASUS_RTN16:
bcm47xx_set_pdata(bcm47xx_leds_asus_rtn16);
break;
@@ -568,6 +598,8 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0101);
break;
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0467);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);
break;
@@ -601,6 +633,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR834BV2:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
break;

View file

@ -1,107 +0,0 @@
From d377732c8c9aac14ccb900b65678558b0fb8f0f3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 17 Jul 2014 23:26:32 +0200
Subject: [PATCH 152/153] Revert "MIPS: Delete unused function
add_temporary_entry."
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This reverts commit d7a887a73dec6c387b02a966a71aac767bbd9ce6.
Function add_temporary_entry is needed by bcm47xx to support highmem. We
need to add a temporary entry to check for amount of RAM.
The only change made in this revert was replacing (ENTER|EXIT)_CRITICAL.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7395/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/pgtable-32.h | 10 ++++++++
arch/mips/mm/tlb-r4k.c | 47 ++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+)
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -19,6 +19,16 @@
#include <asm-generic/pgtable-nopmd.h>
/*
+ * - add_temporary_entry() add a temporary TLB entry. We use TLB entries
+ * starting at the top and working down. This is for populating the
+ * TLB before trap_init() puts the TLB miss handler in place. It
+ * should be used only for entries matching the actual page tables,
+ * to prevent inconsistencies.
+ */
+extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask);
+
+/*
* Basically we have the same two-level (which is the logical three level
* Linux page table layout folded) page tables as the i386. Some day
* when we have proper page coloring support we can have a 1% quicker
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -411,6 +411,51 @@ int __init has_transparent_hugepage(void
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+/*
+ * Used for loading TLB entries before trap_init() has started, when we
+ * don't actually want to add a wired entry which remains throughout the
+ * lifetime of the system
+ */
+
+static int temp_tlb_entry __cpuinitdata;
+
+__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask)
+{
+ int ret = 0;
+ unsigned long flags;
+ unsigned long wired;
+ unsigned long old_pagemask;
+ unsigned long old_ctx;
+
+ local_irq_save(flags);
+ /* Save old context and create impossible VPN2 value */
+ old_ctx = read_c0_entryhi();
+ old_pagemask = read_c0_pagemask();
+ wired = read_c0_wired();
+ if (--temp_tlb_entry < wired) {
+ printk(KERN_WARNING
+ "No TLB space left for add_temporary_entry\n");
+ ret = -ENOSPC;
+ goto out;
+ }
+
+ write_c0_index(temp_tlb_entry);
+ write_c0_pagemask(pagemask);
+ write_c0_entryhi(entryhi);
+ write_c0_entrylo0(entrylo0);
+ write_c0_entrylo1(entrylo1);
+ mtc0_tlbw_hazard();
+ tlb_write_indexed();
+ tlbw_use_hazard();
+
+ write_c0_entryhi(old_ctx);
+ write_c0_pagemask(old_pagemask);
+out:
+ local_irq_restore(flags);
+ return ret;
+}
+
static int ntlb;
static int __init set_ntlb(char *str)
{
@@ -448,6 +493,8 @@ void tlb_init(void)
write_c0_pagegrain(pg);
}
+ temp_tlb_entry = current_cpu_data.tlbsize - 1;
+
/* From this point on the ARC firmware is dead. */
local_flush_tlb_all();

View file

@ -1,166 +0,0 @@
From 6ee1d93455384cef8a0426effe85da241b525b63 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 17 Jul 2014 23:26:33 +0200
Subject: [PATCH 153/153] MIPS: BCM47XX: Detect more then 128 MiB of RAM
(HIGHMEM)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
So far BCM47XX can only detect amount of HIGHMEM. It still requires
adding (registering) and well-testing before enabling by default.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7396/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/bcm47xx_private.h | 3 ++
arch/mips/bcm47xx/prom.c | 68 ++++++++++++++++++++++++++++++++++++-
arch/mips/bcm47xx/setup.c | 3 ++
arch/mips/include/asm/pgtable-32.h | 2 ++
arch/mips/mm/tlb-r4k.c | 2 +-
5 files changed, 76 insertions(+), 2 deletions(-)
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -3,6 +3,9 @@
#include <linux/kernel.h>
+/* prom.c */
+void __init bcm47xx_prom_highmem_init(void);
+
/* buttons.c */
int __init bcm47xx_buttons_register(void);
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -51,6 +51,8 @@ __init void bcm47xx_set_system_type(u16
chip_id);
}
+static unsigned long lowmem __initdata;
+
static __init void prom_init_mem(void)
{
unsigned long mem;
@@ -84,6 +86,7 @@ static __init void prom_init_mem(void)
if (!memcmp(prom_init, prom_init + mem, 32))
break;
}
+ lowmem = mem;
/* Ignoring the last page when ddr size is 128M. Cached
* accesses to last page is causing the processor to prefetch
@@ -92,7 +95,6 @@ static __init void prom_init_mem(void)
*/
if (c->cputype == CPU_74K && (mem == (128 << 20)))
mem -= 0x1000;
-
add_memory_region(0, mem, BOOT_MEM_RAM);
}
@@ -111,3 +113,67 @@ void __init prom_init(void)
void __init prom_free_prom_memory(void)
{
}
+
+#if defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM)
+
+#define EXTVBASE 0xc0000000
+#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> _PFN_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6) | 1)
+
+#include <asm/tlbflush.h>
+
+/* Stripped version of tlb_init, with the call to build_tlb_refill_handler
+ * dropped. Calling it at this stage causes a hang.
+ */
+void __cpuinit early_tlb_init(void)
+{
+ write_c0_pagemask(PM_DEFAULT_MASK);
+ write_c0_wired(0);
+ temp_tlb_entry = current_cpu_data.tlbsize - 1;
+ local_flush_tlb_all();
+}
+
+void __init bcm47xx_prom_highmem_init(void)
+{
+ unsigned long off = (unsigned long)prom_init;
+ unsigned long extmem = 0;
+ bool highmem_region = false;
+
+ if (WARN_ON(bcm47xx_bus_type != BCM47XX_BUS_TYPE_BCMA))
+ return;
+
+ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
+ highmem_region = true;
+
+ if (lowmem != 128 << 20 || !highmem_region)
+ return;
+
+ early_tlb_init();
+
+ /* Add one temporary TLB entry to map SDRAM Region 2.
+ * Physical Virtual
+ * 0x80000000 0xc0000000 (1st: 256MB)
+ * 0x90000000 0xd0000000 (2nd: 256MB)
+ */
+ add_temporary_entry(ENTRYLO(0x80000000),
+ ENTRYLO(0x80000000 + (256 << 20)),
+ EXTVBASE, PM_256M);
+
+ off = EXTVBASE + __pa(off);
+ for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
+ if (!memcmp(prom_init, (void *)(off + extmem), 16))
+ break;
+ }
+ extmem -= lowmem;
+
+ early_tlb_init();
+
+ if (!extmem)
+ return;
+
+ pr_warn("Found %lu MiB of extra memory, but highmem is unsupported yet!\n",
+ extmem >> 20);
+
+ /* TODO: Register extra memory */
+}
+
+#endif /* defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) */
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -231,6 +231,9 @@ void __init plat_mem_setup(void)
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
bcm47xx_register_bcma();
bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
+#ifdef CONFIG_HIGHMEM
+ bcm47xx_prom_highmem_init();
+#endif
#endif
} else {
printk(KERN_INFO "bcm47xx: using ssb bus\n");
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -18,6 +18,8 @@
#include <asm-generic/pgtable-nopmd.h>
+extern int temp_tlb_entry __cpuinitdata;
+
/*
* - add_temporary_entry() add a temporary TLB entry. We use TLB entries
* starting at the top and working down. This is for populating the
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -417,7 +417,7 @@ int __init has_transparent_hugepage(void
* lifetime of the system
*/
-static int temp_tlb_entry __cpuinitdata;
+int temp_tlb_entry __cpuinitdata;
__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
unsigned long entryhi, unsigned long pagemask)

View file

@ -1,132 +0,0 @@
From 8d602dd0f984e8488ab891344ebdb6e1f3128c4a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 3 Sep 2014 22:51:06 +0200
Subject: [PATCH 154/158] MIPS: BCM47XX: Get rid of calls to KSEG1ADDR
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
We should be using ioremap_nocache helper which handles remaps in a
smarter way.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: http://patchwork.linux-mips.org/patch/7611/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/nvram.c | 44 ++++++++++++++++++++++++++++++++------------
1 file changed, 32 insertions(+), 12 deletions(-)
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index 2bed73a..e07976b 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -23,13 +23,13 @@
static char nvram_buf[NVRAM_SPACE];
static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
-static u32 find_nvram_size(u32 end)
+static u32 find_nvram_size(void __iomem *end)
{
- struct nvram_header *header;
+ struct nvram_header __iomem *header;
int i;
for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
- header = (struct nvram_header *)KSEG1ADDR(end - nvram_sizes[i]);
+ header = (struct nvram_header *)(end - nvram_sizes[i]);
if (header->magic == NVRAM_HEADER)
return nvram_sizes[i];
}
@@ -38,35 +38,39 @@ static u32 find_nvram_size(u32 end)
}
/* Probe for NVRAM header */
-static int nvram_find_and_copy(u32 base, u32 lim)
+static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
{
- struct nvram_header *header;
+ struct nvram_header __iomem *header;
int i;
u32 off;
u32 *src, *dst;
u32 size;
+ if (nvram_buf[0]) {
+ pr_warn("nvram already initialized\n");
+ return -EEXIST;
+ }
+
/* TODO: when nvram is on nand flash check for bad blocks first. */
off = FLASH_MIN;
while (off <= lim) {
/* Windowed flash access */
- size = find_nvram_size(base + off);
+ size = find_nvram_size(iobase + off);
if (size) {
- header = (struct nvram_header *)KSEG1ADDR(base + off -
- size);
+ header = (struct nvram_header *)(iobase + off - size);
goto found;
}
off <<= 1;
}
/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
- header = (struct nvram_header *) KSEG1ADDR(base + 4096);
+ header = (struct nvram_header *)(iobase + 4096);
if (header->magic == NVRAM_HEADER) {
size = NVRAM_SPACE;
goto found;
}
- header = (struct nvram_header *) KSEG1ADDR(base + 1024);
+ header = (struct nvram_header *)(iobase + 1024);
if (header->magic == NVRAM_HEADER) {
size = NVRAM_SPACE;
goto found;
@@ -94,6 +98,22 @@ found:
return 0;
}
+static int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
+{
+ void __iomem *iobase;
+ int err;
+
+ iobase = ioremap_nocache(base, lim);
+ if (!iobase)
+ return -ENOMEM;
+
+ err = nvram_find_and_copy(iobase, lim);
+
+ iounmap(iobase);
+
+ return err;
+}
+
#ifdef CONFIG_BCM47XX_SSB
static int nvram_init_ssb(void)
{
@@ -109,7 +129,7 @@ static int nvram_init_ssb(void)
return -ENXIO;
}
- return nvram_find_and_copy(base, lim);
+ return bcm47xx_nvram_init_from_mem(base, lim);
}
#endif
@@ -139,7 +159,7 @@ static int nvram_init_bcma(void)
return -ENXIO;
}
- return nvram_find_and_copy(base, lim);
+ return bcm47xx_nvram_init_from_mem(base, lim);
}
#endif
--
1.8.4.5

View file

@ -1,133 +0,0 @@
From 21400f252a97755579b43a4dc95dd02cd7f0ca75 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 3 Sep 2014 22:59:45 +0200
Subject: [PATCH 155/158] MIPS: BCM47XX: Make ssb init NVRAM instead of bcm47xx
polling it
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This makes NVRAM code less bcm47xx/ssb specific allowing it to become a
standalone driver in the future. A similar patch for bcma will follow
when it's ready.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7612/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/nvram.c | 30 +++++++---------------
arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h | 1 +
drivers/ssb/driver_mipscore.c | 14 +++++++++-
3 files changed, 23 insertions(+), 22 deletions(-)
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index e07976b..fecc5ae 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -98,7 +98,14 @@ found:
return 0;
}
-static int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
+/*
+ * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
+ * subsystem to access flash. We can't even use platform device / driver to
+ * store memory offset.
+ * To handle this we provide following symbol. It's supposed to be called as
+ * soon as we get info about flash device, before any NVRAM entry is needed.
+ */
+int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
{
void __iomem *iobase;
int err;
@@ -114,25 +121,6 @@ static int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
return err;
}
-#ifdef CONFIG_BCM47XX_SSB
-static int nvram_init_ssb(void)
-{
- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
- u32 base;
- u32 lim;
-
- if (mcore->pflash.present) {
- base = mcore->pflash.window;
- lim = mcore->pflash.window_size;
- } else {
- pr_err("Couldn't find supported flash memory\n");
- return -ENXIO;
- }
-
- return bcm47xx_nvram_init_from_mem(base, lim);
-}
-#endif
-
#ifdef CONFIG_BCM47XX_BCMA
static int nvram_init_bcma(void)
{
@@ -168,7 +156,7 @@ static int nvram_init(void)
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
- return nvram_init_ssb();
+ break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
index 36a3fc1..676be22 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
@@ -32,6 +32,7 @@ struct nvram_header {
#define NVRAM_MAX_VALUE_LEN 255
#define NVRAM_MAX_PARAM_LEN 64
+int bcm47xx_nvram_init_from_mem(u32 base, u32 lim);
extern int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len);
static inline void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index 0907706..7b986f9 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -15,6 +15,9 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/time.h>
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx_nvram.h>
+#endif
#include "ssb_private.h"
@@ -210,6 +213,7 @@ static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
{
struct ssb_bus *bus = mcore->dev->bus;
+ struct ssb_sflash *sflash = &mcore->sflash;
struct ssb_pflash *pflash = &mcore->pflash;
/* When there is no chipcommon on the bus there is 4MB flash */
@@ -242,7 +246,15 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
}
ssb_pflash:
- if (pflash->present) {
+ if (sflash->present) {
+#ifdef CONFIG_BCM47XX
+ bcm47xx_nvram_init_from_mem(sflash->window, sflash->size);
+#endif
+ } else if (pflash->present) {
+#ifdef CONFIG_BCM47XX
+ bcm47xx_nvram_init_from_mem(pflash->window, pflash->window_size);
+#endif
+
ssb_pflash_data.width = pflash->buswidth;
ssb_pflash_resource.start = pflash->window;
ssb_pflash_resource.end = pflash->window + pflash->window_size;
--
1.8.4.5

View file

@ -1,113 +0,0 @@
From 7177efc5b030012c54c2e217c9d6decc0bcc1c53 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 28 Oct 2014 13:30:23 +0100
Subject: [PATCH 156/158] MIPS: BCM47XX: Make bcma init NVRAM instead of
bcm47xx polling it
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This drops ssb/bcma dependency and will allow us to make it a standalone
driver.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/8233/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/nvram.c | 42 ++----------------------------------------
drivers/bcma/driver_mips.c | 13 +++++++++++--
2 files changed, 13 insertions(+), 42 deletions(-)
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index fecc5ae..21712fb 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -121,48 +121,10 @@ int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
return err;
}
-#ifdef CONFIG_BCM47XX_BCMA
-static int nvram_init_bcma(void)
-{
- struct bcma_drv_cc *cc = &bcm47xx_bus.bcma.bus.drv_cc;
- u32 base;
- u32 lim;
-
-#ifdef CONFIG_BCMA_NFLASH
- if (cc->nflash.boot) {
- base = BCMA_SOC_FLASH1;
- lim = BCMA_SOC_FLASH1_SZ;
- } else
-#endif
- if (cc->pflash.present) {
- base = cc->pflash.window;
- lim = cc->pflash.window_size;
-#ifdef CONFIG_BCMA_SFLASH
- } else if (cc->sflash.present) {
- base = cc->sflash.window;
- lim = cc->sflash.size;
-#endif
- } else {
- pr_err("Couldn't find supported flash memory\n");
- return -ENXIO;
- }
-
- return bcm47xx_nvram_init_from_mem(base, lim);
-}
-#endif
-
static int nvram_init(void)
{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- break;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return nvram_init_bcma();
-#endif
- }
+ /* TODO: Look for MTD "nvram" partition */
+
return -ENXIO;
}
diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c
index 004d6aa..8a653dc 100644
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -20,6 +20,9 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/time.h>
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx_nvram.h>
+#endif
enum bcma_boot_dev {
BCMA_BOOT_DEV_UNK = 0,
@@ -316,10 +319,16 @@ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
switch (boot_dev) {
case BCMA_BOOT_DEV_PARALLEL:
case BCMA_BOOT_DEV_SERIAL:
- /* TODO: Init NVRAM using BCMA_SOC_FLASH2 window */
+#ifdef CONFIG_BCM47XX
+ bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH2,
+ BCMA_SOC_FLASH2_SZ);
+#endif
break;
case BCMA_BOOT_DEV_NAND:
- /* TODO: Init NVRAM using BCMA_SOC_FLASH1 window */
+#ifdef CONFIG_BCM47XX
+ bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH1,
+ BCMA_SOC_FLASH1_SZ);
+#endif
break;
default:
break;
--
1.8.4.5

View file

@ -1,216 +0,0 @@
From a59da8fb3b2a1f2df5f871464e43cd5b6ca6ceb1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 28 Oct 2014 12:52:02 +0100
Subject: [PATCH 157/158] MIPS: BCM47XX: Move SPROM fallback code into sprom.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This is some general cleanup as well as preparing sprom.c to become a
standalone driver. We will need this for bcm53xx ARM arch support.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8232/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/bcm47xx_private.h | 3 ++
arch/mips/bcm47xx/setup.c | 58 ++-----------------------------
arch/mips/bcm47xx/sprom.c | 68 +++++++++++++++++++++++++++++++++++++
3 files changed, 73 insertions(+), 56 deletions(-)
diff --git a/arch/mips/bcm47xx/bcm47xx_private.h b/arch/mips/bcm47xx/bcm47xx_private.h
index f1cc9d0..12a112d 100644
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -6,6 +6,9 @@
/* prom.c */
void __init bcm47xx_prom_highmem_init(void);
+/* sprom.c */
+void bcm47xx_sprom_register_fallbacks(void);
+
/* buttons.c */
int __init bcm47xx_buttons_register(void);
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index c00585d..444c65a 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -102,23 +102,6 @@ static void bcm47xx_machine_halt(void)
}
#ifdef CONFIG_BCM47XX_SSB
-static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
-{
- char prefix[10];
-
- if (bus->bustype == SSB_BUSTYPE_PCI) {
- memset(out, 0, sizeof(struct ssb_sprom));
- snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
- bus->host_pci->bus->number + 1,
- PCI_SLOT(bus->host_pci->devfn));
- bcm47xx_fill_sprom(out, prefix, false);
- return 0;
- } else {
- printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n");
- return -EINVAL;
- }
-}
-
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
@@ -144,11 +127,6 @@ static void __init bcm47xx_register_ssb(void)
char buf[100];
struct ssb_mipscore *mcore;
- err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb);
- if (err)
- printk(KERN_WARNING "bcm47xx: someone else already registered"
- " a ssb SPROM callback handler (err %d)\n", err);
-
err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
@@ -171,44 +149,10 @@ static void __init bcm47xx_register_ssb(void)
#endif
#ifdef CONFIG_BCM47XX_BCMA
-static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
-{
- char prefix[10];
- struct bcma_device *core;
-
- switch (bus->hosttype) {
- case BCMA_HOSTTYPE_PCI:
- memset(out, 0, sizeof(struct ssb_sprom));
- snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
- bus->host_pci->bus->number + 1,
- PCI_SLOT(bus->host_pci->devfn));
- bcm47xx_fill_sprom(out, prefix, false);
- return 0;
- case BCMA_HOSTTYPE_SOC:
- memset(out, 0, sizeof(struct ssb_sprom));
- core = bcma_find_core(bus, BCMA_CORE_80211);
- if (core) {
- snprintf(prefix, sizeof(prefix), "sb/%u/",
- core->core_index);
- bcm47xx_fill_sprom(out, prefix, true);
- } else {
- bcm47xx_fill_sprom(out, NULL, false);
- }
- return 0;
- default:
- pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n");
- return -EINVAL;
- }
-}
-
static void __init bcm47xx_register_bcma(void)
{
int err;
- err = bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma);
- if (err)
- pr_warn("bcm47xx: someone else already registered a bcma SPROM callback handler (err %d)\n", err);
-
err = bcma_host_soc_register(&bcm47xx_bus.bcma);
if (err)
panic("Failed to register BCMA bus (err %d)", err);
@@ -229,6 +173,7 @@ void __init plat_mem_setup(void)
printk(KERN_INFO "bcm47xx: using bcma bus\n");
#ifdef CONFIG_BCM47XX_BCMA
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
+ bcm47xx_sprom_register_fallbacks();
bcm47xx_register_bcma();
bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
#ifdef CONFIG_HIGHMEM
@@ -239,6 +184,7 @@ void __init plat_mem_setup(void)
printk(KERN_INFO "bcm47xx: using ssb bus\n");
#ifdef CONFIG_BCM47XX_SSB
bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
+ bcm47xx_sprom_register_fallbacks();
bcm47xx_register_ssb();
bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
#endif
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index 41226b6..e772e77 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -801,3 +801,71 @@ void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo,
nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0, true);
}
#endif
+
+#if defined(CONFIG_BCM47XX_SSB)
+static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+ char prefix[10];
+
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ memset(out, 0, sizeof(struct ssb_sprom));
+ snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+ bus->host_pci->bus->number + 1,
+ PCI_SLOT(bus->host_pci->devfn));
+ bcm47xx_fill_sprom(out, prefix, false);
+ return 0;
+ } else {
+ pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n");
+ return -EINVAL;
+ }
+}
+#endif
+
+#if defined(CONFIG_BCM47XX_BCMA)
+static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
+{
+ char prefix[10];
+ struct bcma_device *core;
+
+ switch (bus->hosttype) {
+ case BCMA_HOSTTYPE_PCI:
+ memset(out, 0, sizeof(struct ssb_sprom));
+ snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+ bus->host_pci->bus->number + 1,
+ PCI_SLOT(bus->host_pci->devfn));
+ bcm47xx_fill_sprom(out, prefix, false);
+ return 0;
+ case BCMA_HOSTTYPE_SOC:
+ memset(out, 0, sizeof(struct ssb_sprom));
+ core = bcma_find_core(bus, BCMA_CORE_80211);
+ if (core) {
+ snprintf(prefix, sizeof(prefix), "sb/%u/",
+ core->core_index);
+ bcm47xx_fill_sprom(out, prefix, true);
+ } else {
+ bcm47xx_fill_sprom(out, NULL, false);
+ }
+ return 0;
+ default:
+ pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n");
+ return -EINVAL;
+ }
+}
+#endif
+
+/*
+ * On bcm47xx we need to register SPROM fallback handler very early, so we can't
+ * use anything like platform device / driver for this.
+ */
+void bcm47xx_sprom_register_fallbacks(void)
+{
+#if defined(CONFIG_BCM47XX_SSB)
+ if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb))
+ pr_warn("Failed to registered ssb SPROM handler\n");
+#endif
+
+#if defined(CONFIG_BCM47XX_BCMA)
+ if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma))
+ pr_warn("Failed to registered bcma SPROM handler\n");
+#endif
+}
--
1.8.4.5

View file

@ -1,120 +0,0 @@
From e5810fa0c1bed16fdfb408862a2e17e962ec5cf6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 28 Oct 2014 14:40:38 +0100
Subject: [PATCH 158/158] MIPS: BCM47XX: Initialize bcma bus later (with mm
available)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Initializaion with memory allocator available will be much simpler, this
will allow cleanup in the bcma code.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8234/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/bcm47xx_private.h | 3 +++
arch/mips/bcm47xx/irq.c | 8 ++++++++
arch/mips/bcm47xx/setup.c | 33 +++++++++++++++++++++++++++------
3 files changed, 38 insertions(+), 6 deletions(-)
diff --git a/arch/mips/bcm47xx/bcm47xx_private.h b/arch/mips/bcm47xx/bcm47xx_private.h
index 12a112d..ea909a5 100644
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -15,6 +15,9 @@ int __init bcm47xx_buttons_register(void);
/* leds.c */
void __init bcm47xx_leds_register(void);
+/* setup.c */
+void __init bcm47xx_bus_setup(void);
+
/* workarounds.c */
void __init bcm47xx_workarounds(void);
diff --git a/arch/mips/bcm47xx/irq.c b/arch/mips/bcm47xx/irq.c
index e0585b7..21b4497 100644
--- a/arch/mips/bcm47xx/irq.c
+++ b/arch/mips/bcm47xx/irq.c
@@ -22,6 +22,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "bcm47xx_private.h"
+
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -65,6 +67,12 @@ DEFINE_HWx_IRQDISPATCH(7)
void __init arch_init_irq(void)
{
+ /*
+ * This is the first arch callback after mm_init (we can use kmalloc),
+ * so let's finish bus initialization now.
+ */
+ bcm47xx_bus_setup();
+
#ifdef CONFIG_BCM47XX_BCMA
if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core,
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 444c65a..e43b504 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -156,15 +156,14 @@ static void __init bcm47xx_register_bcma(void)
err = bcma_host_soc_register(&bcm47xx_bus.bcma);
if (err)
panic("Failed to register BCMA bus (err %d)", err);
-
- err = bcma_host_soc_init(&bcm47xx_bus.bcma);
- if (err)
- panic("Failed to initialize BCMA bus (err %d)", err);
-
- bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
}
#endif
+/*
+ * Memory setup is done in the early part of MIPS's arch_mem_init. It's supposed
+ * to detect memory and record it with add_memory_region.
+ * Any extra initializaion performed here must not use kmalloc or bootmem.
+ */
void __init plat_mem_setup(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
@@ -193,6 +192,28 @@ void __init plat_mem_setup(void)
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
+}
+
+/*
+ * This finishes bus initialization doing things that were not possible without
+ * kmalloc. Make sure to call it late enough (after mm_init).
+ */
+void __init bcm47xx_bus_setup(void)
+{
+#ifdef CONFIG_BCM47XX_BCMA
+ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
+ int err;
+
+ err = bcma_host_soc_init(&bcm47xx_bus.bcma);
+ if (err)
+ panic("Failed to initialize BCMA bus (err %d)", err);
+
+ bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo,
+ NULL);
+ }
+#endif
+
+ /* With bus initialized we can access NVRAM and detect the board */
bcm47xx_board_detect();
mips_set_machine_name(bcm47xx_board_get_name());
}
--
1.8.4.5

View file

@ -1,373 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -18,6 +18,20 @@
#include <asm/cpu-type.h>
#include <asm/mipsmtregs.h>
+#ifdef CONFIG_BCM47XX
+#include <asm/paccess.h>
+#include <linux/ssb/ssb.h>
+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
+
+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
+#else
+#define BCM4710_DUMMY_RREG()
+
+#define BCM4710_FILL_TLB(addr)
+#define BCM4710_PROTECTED_FILL_TLB(addr)
+#endif
+
/*
* This macro return a properly sign-extended address suitable as base address
* for indexed cache operations. Two issues here:
@@ -151,6 +165,7 @@ static inline void flush_icache_line_ind
static inline void flush_dcache_line_indexed(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Index_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -178,6 +193,7 @@ static inline void flush_icache_line(uns
static inline void flush_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -185,6 +201,7 @@ static inline void flush_dcache_line(uns
static inline void invalidate_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Invalidate_D, addr);
__dflush_epilogue
}
@@ -223,6 +240,7 @@ static inline void protected_flush_icach
break;
default:
+ BCM4710_DUMMY_RREG();
protected_cache_op(Hit_Invalidate_I, addr);
break;
}
@@ -236,6 +254,7 @@ static inline void protected_flush_icach
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
protected_cache_op(Hit_Writeback_Inv_D, addr);
}
@@ -356,8 +375,51 @@ static inline void invalidate_tcache_pag
: "r" (base), \
"i" (op));
+static inline void blast_dcache(void)
+{
+ unsigned long start = KSEG0;
+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
+ unsigned long end = (start + dcache_size);
+
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+
+ BCM4710_FILL_TLB(start);
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page_indexed(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+ unsigned long ws_end = current_cpu_data.dcache.ways <<
+ current_cpu_data.dcache.waybit;
+ unsigned long ws, addr;
+ for (ws = 0; ws < ws_end; ws += ws_inc) {
+ start = page + ws;
+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, addr);
+ }
+ }
+}
+
/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra) \
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
static inline void extra##blast_##pfx##cache##lsize(void) \
{ \
unsigned long start = INDEX_BASE; \
@@ -369,6 +431,7 @@ static inline void extra##blast_##pfx##c
\
__##pfx##flush_prologue \
\
+ war \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws, indexop); \
@@ -383,6 +446,7 @@ static inline void extra##blast_##pfx##c
\
__##pfx##flush_prologue \
\
+ war \
do { \
cache##lsize##_unroll32(start, hitop); \
start += lsize * 32; \
@@ -401,6 +465,8 @@ static inline void extra##blast_##pfx##c
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
+ war \
+ \
__##pfx##flush_prologue \
\
for (ws = 0; ws < ws_end; ws += ws_inc) \
@@ -410,37 +476,40 @@ static inline void extra##blast_##pfx##c
__##pfx##flush_epilogue \
}
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
-
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
+
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
+
/* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra) \
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2) \
static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
unsigned long end) \
{ \
unsigned long lsize = cpu_##desc##_line_size(); \
unsigned long addr = start & ~(lsize - 1); \
unsigned long aend = (end - 1) & ~(lsize - 1); \
+ war \
\
__##pfx##flush_prologue \
\
while (1) { \
+ war2 \
prot##cache_op(hitop, addr); \
if (addr == aend) \
break; \
@@ -450,15 +519,15 @@ static inline void prot##extra##blast_##
__##pfx##flush_epilogue \
}
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
- protected_, loongson2_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
+ protected_, loongson2_, , )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
/* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
#endif /* _ASM_R4KCACHE_H */
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -436,6 +436,10 @@
.macro RESTORE_SP_AND_RET
LONG_L sp, PT_R29(sp)
.set mips3
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
eret
.set mips0
.endm
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -46,6 +46,10 @@
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
#endif
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -37,6 +37,9 @@
#include <asm/traps.h>
#include <asm/dma-coherence.h>
+/* For enabling BCM4710 cache workarounds */
+int bcm4710 = 0;
+
/*
* Special Variant of smp_call_function for use by cache functions:
*
@@ -113,6 +116,9 @@ static void r4k_blast_dcache_page_setup(
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page = blast_dcache_page;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -129,6 +135,9 @@ static void r4k_blast_dcache_page_indexe
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page_indexed = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -146,6 +155,9 @@ static void r4k_blast_dcache_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache = blast_dcache;
+ else
if (dc_lsize == 0)
r4k_blast_dcache = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -703,6 +715,8 @@ static void local_r4k_flush_cache_sigtra
unsigned long addr = (unsigned long) arg;
R4600_HIT_CACHEOP_WAR_IMPL;
+ BCM4710_PROTECTED_FILL_TLB(addr);
+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
if (dc_lsize)
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
if (!cpu_icache_snoops_remote_store && scache_size)
@@ -1403,6 +1417,17 @@ static void coherency_setup(void)
* silly idea of putting something else there ...
*/
switch (current_cpu_type()) {
+ case CPU_BMIPS3300:
+ {
+ u32 cm;
+ cm = read_c0_diag();
+ /* Enable icache */
+ cm |= (1 << 31);
+ /* Enable dcache */
+ cm |= (1 << 30);
+ write_c0_diag(cm);
+ }
+ break;
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
@@ -1449,6 +1474,15 @@ void r4k_cache_init(void)
extern void build_copy_page(void);
struct cpuinfo_mips *c = &current_cpu_data;
+ /* Check if special workarounds are required */
+#ifdef CONFIG_BCM47XX
+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
+ printk("Enabling BCM4710A0 cache workarounds.\n");
+ bcm4710 = 1;
+ } else
+#endif
+ bcm4710 = 0;
+
probe_pcache();
setup_scache();
@@ -1514,6 +1548,14 @@ void r4k_cache_init(void)
*/
local_r4k___flush_cache_all(NULL);
+#ifdef CONFIG_BCM47XX
+ {
+ static void (*_coherency_setup)(void);
+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
+ _coherency_setup();
+ }
+#else
coherency_setup();
+#endif
board_cache_error_setup = r4k_cache_error_setup;
}
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1280,6 +1280,9 @@ static void build_r4000_tlb_refill_handl
/* No need for uasm_i_nop */
}
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
@@ -1840,6 +1843,9 @@ build_r4000_tlbchange_handler_head(u32 *
{
struct work_registers wr = build_get_work_registers(p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
#else

View file

@ -1,70 +0,0 @@
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -133,6 +133,9 @@
#ifndef cpu_has_local_ebase
#define cpu_has_local_ebase 1
#endif
+#ifndef cpu_use_kmap_coherent
+#define cpu_use_kmap_coherent 1
+#endif
/*
* I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
--- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
@@ -79,4 +79,6 @@
#define cpu_scache_line_size() 0
#define cpu_has_vz 0
+#define cpu_use_kmap_coherent 0
+
#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -523,7 +523,7 @@ static inline void local_r4k_flush_cache
*/
map_coherent = (cpu_has_dc_aliases &&
page_mapped(page) && !Page_dcache_dirty(page));
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page);
@@ -546,7 +546,7 @@ static inline void local_r4k_flush_cache
}
if (vaddr) {
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr);
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -200,7 +200,7 @@ void copy_user_highpage(struct page *to,
void *vfrom, *vto;
vto = kmap_atomic(to);
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(from) && !Page_dcache_dirty(from)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
@@ -222,7 +222,7 @@ void copy_to_user_page(struct vm_area_st
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(page) && !Page_dcache_dirty(page)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
@@ -240,7 +240,7 @@ void copy_from_user_page(struct vm_area_
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(page) && !Page_dcache_dirty(page)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);

View file

@ -1,122 +0,0 @@
From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 9 Nov 2013 17:03:59 +0100
Subject: [PATCH 210/210] b44: register adm switch
---
drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++
drivers/net/ethernet/broadcom/b44.h | 3 ++
2 files changed, 60 insertions(+)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -31,6 +31,8 @@
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/adm6996-gpio.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -2239,6 +2241,70 @@ static void b44_adjust_link(struct net_d
}
}
+#ifdef CONFIG_BCM47XX
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ int gpio;
+ struct platform_device *pdev;
+ struct adm6996_gpio_platform_data adm_data = {0};
+ struct platform_device_info info = {0};
+
+ adm_data.model = ADM6996L;
+ gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
+ if (gpio >= 0)
+ adm_data.eecs = gpio;
+ else
+ adm_data.eecs = 2;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
+ if (gpio >= 0)
+ adm_data.eesk = gpio;
+ else
+ adm_data.eesk = 3;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
+ if (gpio >= 0)
+ adm_data.eedi = gpio;
+ else
+ adm_data.eedi = 4;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_rc");
+ if (gpio >= 0)
+ adm_data.eerc = gpio;
+ else
+ adm_data.eerc = 5;
+
+ info.parent = bp->sdev->dev;
+ info.name = "adm6996_gpio";
+ info.id = -1;
+ info.data = &adm_data;
+ info.size_data = sizeof(adm_data);
+
+ if (!bp->adm_switch) {
+ pdev = platform_device_register_full(&info);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ bp->adm_switch = pdev;
+ }
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+ if (bp->adm_switch)
+ platform_device_unregister(bp->adm_switch);
+}
+#else
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+
+}
+#endif /* CONFIG_BCM47XX */
+
static int b44_register_phy_one(struct b44 *bp)
{
struct mii_bus *mii_bus;
@@ -2282,6 +2348,9 @@ static int b44_register_phy_one(struct b
if (!bp->mii_bus->phy_map[bp->phy_addr] &&
(sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
+ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
+ b44_register_adm_switch(bp);
+
dev_info(sdev->dev,
"could not find PHY at %i, use fixed one\n",
bp->phy_addr);
@@ -2476,6 +2545,7 @@ static void b44_remove_one(struct ssb_de
unregister_netdev(dev);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
b44_unregister_phy_one(bp);
+ b44_unregister_adm_switch(bp);
ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -404,6 +404,9 @@ struct b44 {
struct mii_bus *mii_bus;
int old_link;
struct mii_if_info mii_if;
+
+ /* platform device for associated switch */
+ struct platform_device *adm_switch;
};
#endif /* _B44_H */

View file

@ -1,54 +0,0 @@
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
error:
pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
}
+
+static void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+ char buf[20];
+ struct ssb_device *sdev = bp->sdev;
+
+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
+ if (sdev->bus->sprom.board_num == 100) {
+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ } else {
+ /* WL-HDD */
+ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
+ !strncmp(buf, "WL300-", strlen("WL300-"))) {
+ if (sdev->bus->sprom.et0phyaddr == 0 &&
+ sdev->bus->sprom.et1phyaddr == 1)
+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ }
+ }
+ return;
+}
#else
static inline void b44_wap54g10_workaround(struct b44 *bp)
{
}
+
+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+}
#endif
static int b44_setup_phy(struct b44 *bp)
@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
int err;
b44_wap54g10_workaround(bp);
+ b44_bcm47xx_workarounds(bp);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
return 0;
@@ -2169,6 +2194,8 @@ static int b44_get_invariants(struct b44
* valid PHY address. */
bp->phy_addr &= 0x1F;
+ b44_bcm47xx_workarounds(bp);
+
memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){

View file

@ -1,25 +0,0 @@
This prevents the options from being delete with make kernel_oldconfig.
---
drivers/ssb/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -38,6 +38,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
config BCMA_HOST_SOC
bool "Support for BCMA in a SoC"
depends on BCMA
+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
help
Host interface for a Broadcom AIX bus directly mapped into
the memory. This only works with the Broadcom SoCs from the
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -146,6 +146,7 @@ config SSB_SFLASH
config SSB_EMBEDDED
bool
depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
default y
config SSB_DRIVER_EXTIF

View file

@ -1,11 +0,0 @@
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -32,7 +32,7 @@
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
extern void (*flush_cache_mm)(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
extern void (*flush_cache_range)(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);

View file

@ -1,66 +0,0 @@
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
#endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
#include <linux/pfn.h>
+#include <asm/cpu-features.h>
extern void build_clear_page(void);
extern void build_copy_page(void);
@@ -105,13 +106,16 @@ static inline void clear_user_page(void
flush_data_cache_page((unsigned long)addr);
}
-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
- struct page *to);
-struct vm_area_struct;
-extern void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma);
+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to)
+{
+ extern void (*flush_data_cache_page)(unsigned long addr);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+ copy_page(vto, vfrom);
+ if (!cpu_has_ic_fills_f_dc ||
+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ flush_data_cache_page((unsigned long)vto);
+}
/*
* These are used to make use of C type-checking..
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -194,30 +194,6 @@ void kunmap_coherent(void)
pagefault_enable();
}
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma)
-{
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent();
- } else {
- vfrom = kmap_atomic(from);
- copy_page(vto, vfrom);
- kunmap_atomic(vfrom);
- }
- if ((!cpu_has_ic_fills_f_dc) ||
- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
- flush_data_cache_page((unsigned long)vto);
- kunmap_atomic(vto);
- /* Make sure this page is cleared on other CPU's too before using it */
- smp_wmb();
-}
-
void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)

View file

@ -1,67 +0,0 @@
From be64eb65a1b24ea9528b0fcdd652ee2068da6106 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 20 Nov 2014 20:56:27 +0100
Subject: [PATCH] MIPS: BCM47XX: Devices database update for 3.x
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
arch/mips/bcm47xx/board.c | 1 +
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
2 files changed, 2 insertions(+)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -165,9 +165,11 @@ static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNDR3400_V3, "Netgear WNDR3400 V3"}, "U12H208T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -86,9 +86,11 @@ enum bcm47xx_board {
BCM47XX_BOARD_NETGEAR_WGR614V8,
BCM47XX_BOARD_NETGEAR_WGR614V9,
+ BCM47XX_BOARD_NETGEAR_WGR614_V10,
BCM47XX_BOARD_NETGEAR_WNDR3300,
BCM47XX_BOARD_NETGEAR_WNDR3400V1,
BCM47XX_BOARD_NETGEAR_WNDR3400V2,
+ BCM47XX_BOARD_NETGEAR_WNDR3400_V3,
BCM47XX_BOARD_NETGEAR_WNDR3400VCNA,
BCM47XX_BOARD_NETGEAR_WNDR3700V3,
BCM47XX_BOARD_NETGEAR_WNDR4000,
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -327,6 +327,12 @@ bcm47xx_buttons_netgear_wndr3400v1[] __i
};
static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr3400_v3[] __initconst = {
+ BCM47XX_GPIO_KEY(12, KEY_RESTART),
+ BCM47XX_GPIO_KEY(23, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_netgear_wndr3700v3[] __initconst = {
BCM47XX_GPIO_KEY(2, KEY_RFKILL),
BCM47XX_GPIO_KEY(3, KEY_RESTART),
@@ -557,6 +563,9 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400_v3);
+ break;
case BCM47XX_BOARD_NETGEAR_WNDR3700V3:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3700v3);
break;

View file

@ -1,14 +0,0 @@
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -191,7 +191,11 @@ static inline void ide_std_init_ports(st
hw->io_ports.ctl_addr = ctl_addr;
}
+#if defined CONFIG_BCM47XX
+# define MAX_HWIFS 2
+#else
#define MAX_HWIFS 10
+#endif
/*
* Now for the data we need to maintain per-drive: ide_drive_t

View file

@ -1,17 +0,0 @@
When the Ethernet controller is powered down and someone wants to
access the mdio bus like the witch driver (b53) the system crashed if
PCI_D3hot was set before. This patch deactivates this power sawing mode
when a switch driver is in use.
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -4269,7 +4269,8 @@ static int tg3_power_down_prepare(struct
static void tg3_power_down(struct tg3 *tp)
{
pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
- pci_set_power_state(tp->pdev, PCI_D3hot);
+ if (!tg3_flag(tp, ROBOSWITCH))
+ pci_set_power_state(tp->pdev, PCI_D3hot);
}
static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)

View file

@ -1,72 +0,0 @@
From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 20 Nov 2014 21:32:42 +0100
Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -9,6 +9,7 @@
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
+#include <bcm47xx_board.h>
static struct resource bcma_sflash_resource = {
.name = "bcma_sflash",
@@ -41,6 +42,13 @@ static const struct bcma_sflash_tbl_e bc
{ NULL },
};
+/* Some devices use smaller blocks (and have more of them) */
+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
+ { "M25P16", 0x14, 0x1000, 512, },
+ { "M25P32", 0x15, 0x1000, 1024, },
+ { NULL },
+};
+
static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
{ "SST25WF512", 1, 0x1000, 16, },
{ "SST25VF512", 0x48, 0x1000, 16, },
@@ -84,6 +92,23 @@ static void bcma_sflash_cmd(struct bcma_
bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
}
+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+ const struct bcma_sflash_tbl_e *e;
+
+ switch (board) {
+ case BCM47XX_BOARD_NETGEAR_WGR614_V10:
+ for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
+ if (e->id == id)
+ return e;
+ }
+ return NULL;
+ default:
+ return NULL;
+ }
+}
+
/* Initialize serial flash access */
int bcma_sflash_init(struct bcma_drv_cc *cc)
{
@@ -114,6 +139,10 @@ int bcma_sflash_init(struct bcma_drv_cc
case 0x13:
return -ENOTSUPP;
default:
+ e = bcma_sflash_shrink_flash(id);
+ if (e)
+ break;
+
for (e = bcma_sflash_st_tbl; e->name; e++) {
if (e->id == id)
break;

View file

@ -1,296 +0,0 @@
The Netgear wgt634u uses a different format for storing the
configuration. This patch is needed to read out the correct
configuration. The cfe_env.c file uses a different method way to read
out the configuration than the in kernel cfe config reader.
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -5,3 +5,4 @@
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
obj-y += board.o buttons.o leds.o workarounds.o
+obj-y += cfe_env.o
--- /dev/null
+++ b/arch/mips/bcm47xx/cfe_env.c
@@ -0,0 +1,229 @@
+/*
+ * CFE environment variable access
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define NVRAM_SIZE (0x1ff0)
+static char _nvdata[NVRAM_SIZE];
+static char _valuestr[256];
+
+/*
+ * TLV types. These codes are used in the "type-length-value"
+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
+ *
+ * The layout of the flash/nvram is as follows:
+ *
+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
+ *
+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
+ * The "length" field marks the length of the data section, not
+ * including the type and length fields.
+ *
+ * Environment variables are stored as follows:
+ *
+ * <type_env> <length> <flags> <name> = <value>
+ *
+ * If bit 0 (low bit) is set, the length is an 8-bit value.
+ * If bit 0 (low bit) is clear, the length is a 16-bit value
+ *
+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
+ * indicates the size of the length field.
+ *
+ * Flags are from the constants below:
+ *
+ */
+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
+#define ENV_LENGTH_8BITS 0x01
+
+#define ENV_TYPE_USER 0x80
+
+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
+
+/*
+ * The actual TLV types we support
+ */
+
+#define ENV_TLV_TYPE_END 0x00
+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
+
+/*
+ * Environment variable flags
+ */
+
+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
+
+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
+
+
+/* *********************************************************************
+ * _nvram_read(buffer,offset,length)
+ *
+ * Read data from the NVRAM device
+ *
+ * Input parameters:
+ * buffer - destination buffer
+ * offset - offset of data to read
+ * length - number of bytes to read
+ *
+ * Return value:
+ * number of bytes read, or <0 if error occured
+ ********************************************************************* */
+static int
+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
+{
+ int i;
+ if (offset > NVRAM_SIZE)
+ return -1;
+
+ for ( i = 0; i < length; i++) {
+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
+ }
+ return length;
+}
+
+
+static char*
+_strnchr(const char *dest,int c,size_t cnt)
+{
+ while (*dest && (cnt > 0)) {
+ if (*dest == c) return (char *) dest;
+ dest++;
+ cnt--;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Core support API: Externally visible.
+ */
+
+/*
+ * Get the value of an NVRAM variable
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+
+char*
+cfe_env_get(unsigned char *nv_buf, char* name)
+{
+ int size;
+ unsigned char *buffer;
+ unsigned char *ptr;
+ unsigned char *envval;
+ unsigned int reclen;
+ unsigned int rectype;
+ int offset;
+ int flg;
+
+ if (!strcmp(name, "nvram_type"))
+ return "cfe";
+
+ size = NVRAM_SIZE;
+ buffer = &_nvdata[0];
+
+ ptr = buffer;
+ offset = 0;
+
+ /* Read the record type and length */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+
+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
+
+ /* Adjust pointer for TLV type */
+ rectype = *(ptr);
+ offset++;
+ size--;
+
+ /*
+ * Read the length. It can be either 1 or 2 bytes
+ * depending on the code
+ */
+ if (rectype & ENV_LENGTH_8BITS) {
+ /* Read the record type and length - 8 bits */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+ reclen = *(ptr);
+ size--;
+ offset++;
+ }
+ else {
+ /* Read the record type and length - 16 bits, MSB first */
+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
+ goto error;
+ }
+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
+ size -= 2;
+ offset += 2;
+ }
+
+ if (reclen > size)
+ break; /* should not happen, bad NVRAM */
+
+ switch (rectype) {
+ case ENV_TLV_TYPE_ENV:
+ /* Read the TLV data */
+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
+ goto error;
+ flg = *ptr++;
+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
+ if (envval) {
+ *envval++ = '\0';
+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
+#if 0
+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
+#endif
+ if(!strcmp(ptr, name)){
+ return _valuestr;
+ }
+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
+ return _valuestr;
+ }
+ break;
+
+ default:
+ /* Unknown TLV type, skip it. */
+ break;
+ }
+
+ /*
+ * Advance to next TLV
+ */
+
+ size -= (int)reclen;
+ offset += reclen;
+
+ /* Read the next record type */
+ ptr = buffer;
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
+ goto error;
+ }
+
+error:
+ return NULL;
+
+}
+
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -22,6 +22,8 @@
static char nvram_buf[NVRAM_SPACE];
static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
+static int cfe_env;
+extern char *cfe_env_get(char *nv_buf, const char *name);
static u32 find_nvram_size(void __iomem *end)
{
@@ -51,6 +53,26 @@ static int nvram_find_and_copy(void __io
return -EEXIST;
}
+ cfe_env = 0;
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
+ if (lim >= 8 * 1024 * 1024) {
+ src = (u32 *) iobase + 8 * 1024 * 1024 - 0x2000;
+ dst = (u32 *) nvram_buf;
+
+ if ((*src & 0xff00ff) == 0x000001) {
+ printk("early_nvram_init: WGT634U NVRAM found.\n");
+
+ for (i = 0; i < 0x1ff0; i++) {
+ if (*src == 0xFFFFFFFF)
+ break;
+ *dst++ = *src++;
+ }
+ cfe_env = 1;
+ return 0;
+ }
+ }
+
/* TODO: when nvram is on nand flash check for bad blocks first. */
off = FLASH_MIN;
while (off <= lim) {
@@ -142,6 +164,13 @@ int bcm47xx_nvram_getenv(char *name, cha
return err;
}
+ if (cfe_env) {
+ value = cfe_env_get(nvram_buf, name);
+ if (!value)
+ return -ENOENT;
+ return snprintf(val, val_len, "%s", value);
+ }
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;

View file

@ -1,101 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -36,6 +36,7 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
+#include <linux/old_gpio_wdt.h>
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/prom.h>
@@ -249,6 +250,33 @@ static struct fixed_phy_status bcm47xx_f
.duplex = DUPLEX_FULL,
};
+static struct gpio_wdt_platform_data gpio_wdt_data;
+
+static struct platform_device gpio_wdt_device = {
+ .name = "gpio-wdt",
+ .id = 0,
+ .dev = {
+ .platform_data = &gpio_wdt_data,
+ },
+};
+
+static int __init bcm47xx_register_gpio_watchdog(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_HUAWEI_E970:
+ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
+ gpio_wdt_data.gpio = 7;
+ gpio_wdt_data.interval = HZ;
+ gpio_wdt_data.first_interval = HZ / 5;
+ return platform_device_register(&gpio_wdt_device);
+ default:
+ /* Nothing to do */
+ return 0;
+ }
+}
+
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
@@ -268,6 +296,7 @@ static int __init bcm47xx_register_bus_c
bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
+ bcm47xx_register_gpio_watchdog();
return 0;
}
device_initcall(bcm47xx_register_bus_complete);
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -67,6 +67,7 @@ CONFIG_HW_RANDOM=y
CONFIG_GPIO_SYSFS=y
CONFIG_WATCHDOG=y
CONFIG_BCM47XX_WDT=y
+CONFIG_GPIO_WDT=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
}
EXPORT_SYMBOL(ssb_watchdog_timer_set);
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx_board.h>
+
+static bool ssb_watchdog_supported(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ /* The Huawei E970 has a hardware watchdog using a GPIO */
+ switch (board) {
+ case BCM47XX_BOARD_HUAWEI_E970:
+ return false;
+ default:
+ return true;
+ }
+}
+#else
+static bool ssb_watchdog_supported(void)
+{
+ return true;
+}
+#endif
+
int ssb_watchdog_register(struct ssb_bus *bus)
{
struct bcm47xx_wdt wdt = {};
struct platform_device *pdev;
+ if (!ssb_watchdog_supported())
+ return 0;
+
if (ssb_chipco_available(&bus->chipco)) {
wdt.driver_data = &bus->chipco;
wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;

View file

@ -1,138 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -21,10 +21,28 @@
#ifdef CONFIG_BCM47XX
#include <asm/paccess.h>
#include <linux/ssb/ssb.h>
-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
+
+static inline unsigned long bcm4710_dummy_rreg(void)
+{
+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
+}
+
+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
+
+static inline unsigned long bcm4710_fill_tlb(void *addr)
+{
+ return *(unsigned long *)addr;
+}
+
+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
+
+static inline void bcm4710_protected_fill_tlb(void *addr)
+{
+ unsigned long x;
+ get_dbe(x, (unsigned long *)addr);;
+}
-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
#else
#define BCM4710_DUMMY_RREG()
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -935,6 +935,9 @@ build_get_pgde32(u32 **p, unsigned int t
uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
uasm_i_addu(p, ptr, tmp, ptr);
#else
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
UASM_i_LA_mostly(p, ptr, pgdc);
#endif
uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
@@ -1280,12 +1283,12 @@ static void build_r4000_tlb_refill_handl
/* No need for uasm_i_nop */
}
-#ifdef CONFIG_BCM47XX
- uasm_i_nop(&p);
-#endif
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+# endif
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
#endif
@@ -1297,6 +1300,9 @@ static void build_r4000_tlb_refill_handl
build_update_entries(&p, K0, K1);
build_tlb_write_entry(&p, &l, &r, tlb_random);
uasm_l_leave(&l, p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
uasm_i_eret(&p); /* return from trap */
}
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
@@ -1843,12 +1849,12 @@ build_r4000_tlbchange_handler_head(u32 *
{
struct work_registers wr = build_get_work_registers(p);
-#ifdef CONFIG_BCM47XX
- uasm_i_nop(p);
-#endif
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+# endif
build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
#endif
@@ -1887,6 +1893,9 @@ build_r4000_tlbchange_handler_tail(u32 *
build_tlb_write_entry(p, l, r, tlb_indexed);
uasm_l_leave(l, *p);
build_restore_work_registers(p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
uasm_i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -21,6 +21,19 @@
#include <asm/war.h>
#include <asm/thread_info.h>
+#ifdef CONFIG_BCM47XX
+# ifdef eret
+# undef eret
+# endif
+# define eret \
+ .set push; \
+ .set noreorder; \
+ nop; \
+ nop; \
+ eret; \
+ .set pop;
+#endif
+
#ifdef CONFIG_MIPS_MT_SMTC
#define PANIC_PIC(msg) \
.set push; \
@@ -48,7 +61,6 @@ NESTED(except_vec3_generic, 0, sp)
.set noat
#ifdef CONFIG_BCM47XX
nop
- nop
#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
@@ -73,6 +85,9 @@ NESTED(except_vec3_r4000, 0, sp)
.set push
.set mips3
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+#endif
mfc0 k1, CP0_CAUSE
li k0, 31<<2
andi k1, k1, 0x7c

View file

@ -1,46 +0,0 @@
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
* Probe for usable interrupts using the force
* register to generate bogus card status events.
*/
+#ifndef CONFIG_BCM47XX
+ /* WRT54G3G does not like this */
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
reg = exca_readb(socket, I365_CSCINT);
@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
}
cb_writel(socket, CB_SOCKET_MASK, 0);
exca_writeb(socket, I365_CSCINT, reg);
+#endif
mask = probe_irq_mask(val) & 0xffff;
@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
else
socket->socket.irq_mask = 0;
+ /* irq mask probing is broken for the WRT54G3G */
+ if (socket->socket.irq_mask == 0)
+ socket->socket.irq_mask = 0x6f8;
+
dev_printk(KERN_INFO, &socket->dev->dev,
"ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
@@ -1257,6 +1264,15 @@ static int yenta_probe(struct pci_dev *d
dev_printk(KERN_INFO, &dev->dev,
"Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ /* Generate an interrupt on card insert/remove */
+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
+
+ /* Set up Multifunction Routing Status Register */
+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
+
+ /* Switch interrupts to parallelized */
+ config_writeb(socket, 0x92, 0x64);
+
yenta_fixup_parent_bridge(dev->subordinate);
/* Register it with the pcmcia layer.. */

View file

@ -1,11 +0,0 @@
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -375,7 +375,7 @@ static void ssb_pcicore_init_hostmode(st
set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
- mdelay(10);
+ mdelay(300);
register_pci_controller(&ssb_pcicore_controller);
}

View file

@ -1,13 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -119,6 +119,10 @@ static int bcm47xx_get_invariants(struct
if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
+ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
+ iv->has_cardbus_slot = 0;
+
return 0;
}

View file

@ -1,22 +0,0 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -20,7 +20,8 @@
#include <bcm47xx_nvram.h>
#include <asm/mach-bcm47xx/bcm47xx.h>
-static char nvram_buf[NVRAM_SPACE];
+char nvram_buf[NVRAM_SPACE];
+EXPORT_SYMBOL(nvram_buf);
static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
static int cfe_env;
extern char *cfe_env_get(char *nv_buf, const char *name);
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv);
+EXPORT_SYMBOL(_dma_cache_inv);
#endif /* CONFIG_DMA_NONCOHERENT */