Commit graph

409 commits

Author SHA1 Message Date
Marko Ratkaj
ad0e107c23 uboot-mvebu: add missing UBOOT_MAKE_FLAGS variable
This patch removes "/bin/sh: HOSTCPPFLAGS: command not found" errors douring build.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 22:38:29 +02:00
Lucian Cristian
a7465f375a sunxi: add Olimex A20-OLinuXino-LIME2-eMMC
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[replaced u-boot patch with original version from u-boot git]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-24 16:28:28 +02:00
Stijn Tintel
6c32e05218 arm-trusted-firmware-sunxi: depend on sunxi target
The arm-trusted-firmware-sunxi package is only used by the Allwinner
A64, so only make it selectable for its subtarget sunxi/cortexa53.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-09-20 23:49:36 +03:00
Sandeep Sheriker Mallikarjun
670448a002 at91bootstrap: New package at91bootstrap
at91bootstrap is a second-level bootloader for Microchip(Atmel AT91) SoCs.
It provides a set of algorithms to manage the hardware initialization and
to download the main application or a third-level bootloader(i.e. uboot)
from specified boot media to main memory and execute it.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:46 +02:00
Sandeep Sheriker Mallikarjun
5b9cff921e uboot-at91: Add support for SAMA5D4 Xplained board
Add support for SAMA5D4 Xplained board and options to select & build
u-boot configs for different media storage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:38 +02:00
Sandeep Sheriker Mallikarjun
dacab6472d uboot-at91: Add support for SAMA5D2 Xplained board
Add support for SAMA5D2 Xplained board and options to select & build
u-boot configs for different media storage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:31 +02:00
Sandeep Sheriker Mallikarjun
8f1764b98a uboot-at91: Add support for SAMA5D3 Xplained board
Add support for SAMA5D3 Xplained board and options to select & build
u-boot configs for different media storage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:24 +02:00
Sandeep Sheriker Mallikarjun
71a93a22fd uboot-at91: move BUILD_SUBTARGET from U-Boot/Default to devices
currenlty U-Boot/Default supports only at91 legacy devices.To add
sama5 support, moving BUILD_SUBTARGET from U-Boot/Default to target
devices.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:16 +02:00
Lucian Cristian
f295db6e46 sunxi: add Olimex A20-OlinuXino-LIME2
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-09-18 21:29:16 +02:00
Hauke Mehrtens
e080a7ce07 uboot-sunxi: build A64 SoC and pine64 U-Boot
This creates a U-Boot for the aarch64 SoC A64 on the pine64 board.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:27 +02:00
Hauke Mehrtens
ea46d386e0 arm-trusted-firmware-sunxi: add new package
This is needed for the Boot loader of the A64 SoC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
41e7d2e2e8 sunxi: split into cortex A8 and A7 subtarget
Now we can activate some compiler optimizations for the cortex A7.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
b9a35920bf uboot-sunxi: revert the usage of binman
This will avoid the usage of swig.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
85b7d780c5 uboot-sunxi: do not depend on dtc being install on host
make mkimage check the DTC environment variable first.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
1422d4435b uboot-sunxi: update to version 2017.07
The deleted patches are already integrated in the upstream U-Boot
version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Ram Chandra Jangir
9adfeccd84 uboot-envtools: Add support for IPQ806x AP148 and DB149
IPQ806x AP148 and DB149 boards didn't have the UCI ubootenv
section initialized, so the usage of fw_printenv required manual
configuration. With this change, the "fw_printenv" and "fw_setenv"
command will automatically work on NOR and NAND based platforms.

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
2017-08-30 18:12:48 +02:00
Carl-Daniel Hailfinger
3e6d303d61 uboot-lantiq: Enable TFTP PUT support for backups
Backing up the current firmware from U-Boot over serial can take hours.
Booting a working Linux image for backup purposes is not always an option.
Using the tftpput command in U-Boot is the fastest and easiest way.

tftpput will upload the contents of a memory region to the TFTP server.
The IP address of the server is stored in the serverip variable.

Usage:
tftpput <memaddr> <length> <filename>

Example for a complete flash backup of an o2 Box 6431 (VGV7510KW22):
VGV7510KW22 # tftpput 0xB0000000 0x1000000 o2boxbackup.bin

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
2017-08-18 18:47:27 +02:00
Mathias Kresin
60f6c2b2eb ramips: drop Edimax BR-6425 support
Code to build an image for the Edimax BR-6425 never existed.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-08-03 00:07:56 +02:00
Piotr Dymacz
8223dac99a uboot-envtools: add support for ALFA Network AP121F
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-07-22 23:14:06 +02:00
Mathias Kresin
f12a32630f treewide: use the generic board_name function
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Camille Bilodeau
bdd3c94872 uboot-envtools: add Arduino Yun support
Signed-off-by: Camille Bilodeau <camille.bilodeau@protonmail.com>
2017-06-29 10:37:36 +02:00
Daniel Golle
5e4bb476c0 kexec-tools: bump version and add support for crashdump kernel
split kexec-tools into two packages, kexec and kdump.
* kexec to simply execute a new kernel
* kdump is for loading and collecting debris of a crashed kernel with
  support for kdump forensics.

In order to properly support booting into a crashkernel, an init script
as well as UCI configuration has been added.
As modifying the kernel cmdline is required for this to work in x86
platforms use an uci-defaults script to modify /boot/grub/grub.cfg.

To test collecting crash information, use the 'c' sysrq-trigger, ie.
echo c > /proc/sysrq-trigger

This should result in the crash kernel being executed and (depending
on the configution) dmesg and/or vmcore getting saved.

To check if the crash kernel was loaded properly, use the 'status'
command of the kdump init script.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-06-09 22:21:25 +02:00
Alif M. Ahmad
415c47de79 package/grub2: update to 2.02
Update to version 2.02

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-06-07 18:31:10 +02:00
Martin Schiller
d189fe62cd uboot-lantiq/spl: fixed uninitialized variable len in spl_uncompress_lzo
This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck)

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-05-31 08:41:31 +02:00
Martin Schiller
bbb27b1b22 uboot-lantiq: Support newer versions of the PEF7071 ethernet
This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck)

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-05-31 08:41:16 +02:00
Marty Plummer
558d86923e ar71xx: add support for EnGenius ENS202EXT
EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.

The device is based on Qualcomm/Atheros AR9341 v1.

Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button

Flash instructions:

You have three options:

- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.

- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.

- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:

*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
      stat -- Status
       sys -- System
    wless2 -- 2.4G-Wireless
      mgmt -- Management
      tree -- Tree
      help -- Help
    reboot -- Reboot
ens202ext>mgmt
  Management
---========= Commands Help =========---
     admin -- Administration
     mvlan -- Management VLAN settings
      snmp -- SNMP settings
    backup -- Backup/Restore settings
    autorb -- Auto reboot settings
   fwgrade -- Firmware upgrade
      time -- Time settings
   wifisch -- Wifi schedule
       log -- Log
      diag -- Diagnostics
      disc -- Device Discovery
    logout -- Logout
      help -- Help
      exit -- Exit
ens202ext/mgmt>fwgrade
  Management --> Firmware upgrade
---========= Commands Help =========---
      fwup -- Firmware upgrade
      help -- Help
      exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin

Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
2017-05-30 14:15:25 +02:00
Josua Mayer
e2814f6416 u-boot-mvebu: clearfog: enable setexpr command
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
c4f9474059 u-boot-mvebu: clearfog: implement distro-boot
Add a patchfile that implements distro-boot and is meant to go upstream
Also make the other patches git-am'able for easier maintenance.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
86c4144571 u-boot-mvebu: update to 2017.03
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Mantas Pucka
cd9d0f9e97 uboot-envtools: add support for 8devices Rambutan
Signed-off-by: Mantas Pucka <mantas@8devices.com>
2017-05-15 22:43:33 +02:00
Marko Ratkaj
ee1cee2cac mvebu: add ClearFog Base support
Add support for SolidRun ClearFog Base board.

The base model is a smaller version of ClearFog Pro without
the DSA switch, replacing it with a second copper gigabit
port, and only one PCIe socket.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Marko Ratkaj
ec4a8c6dee mvebu: ClearFog renamed upstream to ClearFog Pro
The conventional model is now known as the "Clearfog Pro"

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Alexander Couzens
21c2e93e67
uboot-omap: rename patch to 101-disable-thumb-omap3.patch
It's disabling thumb for the whole omap3 family.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-30 12:19:07 +02:00
Alexander Couzens
ca8988614c uboot-omap: enable thumb for overo
Even it's unknown if it's booting with thumb, because the lack of hardware.
Enable it for now, so the build succeed, because without thumb it can not fit
into spl.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-30 12:17:30 +02:00
Alexander Couzens
23fc55e723 package/uboot-omap: add am335x_boneblack
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
a5eb9c6370 package/uboot-omap: add default uEnv to boot via mmc card
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
147e18bdbd package/uboot-omap: re-introduce patches dropped by update to v2017.01
The beagleboard doesn't boot with Thumb enabled, but without Thumb the
SPL (first stage bootloader) is too big to fit into SRAM.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
e2caa74a2f package/uboot-omap: install image to STAGING_DIR_IMAGE
to use them later by image/Makefile to create full working sdcard images

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
4ac4148cc4 package/uboot-omap: assign BUILD_DEVICES most boards
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Mathias Kresin
18618695ae ramips: dont replace the board name
Use fixed led names and add each board variant instead of manipulating
the board name.

It makes the ramips board name function less different to the one used
in other targets and allows to merge them with a common function.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-21 07:47:59 +02:00
Alif M. Ahmad
ffd055d5bb grub2: update to 2.02~rc2
Update to version 2.02~rc2.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-04-12 11:24:57 +02:00
Felix Fietkau
8b8ce566d9 uboot-ar71xx: fix build error
The HOSTCFLAGS override only works on newer u-boot versions

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-06 16:25:08 +02:00
Felix Fietkau
68139cc0e8 u-boot.mk: pass HOSTCC and HOST_CFLAGS into the build
Cuts build time on Mac OS X in half by avoiding repeated $(shell) calls
from the build system

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-04 12:34:23 +02:00
Felix Fietkau
2526d150dc uboot-lantiq: fix build error on mac os x
asm/* includes are not safe for the host build

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-04 12:33:34 +02:00
Philip Prindeville
dfacdc6a99 kexec-tools: get kexec running on MUSL and x86 hardware
Couple of important upstream patches (slated for 2.0.15) that
are necessary for kexec to run on MUSL and on x86 hardware.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-04-03 08:50:57 +02:00
Paul Wassi
55920643b1 package/boot/uboot-kirkwood: fix build errors for nsa310 and nsa325
With upstream changes, the last update to U-Boot 2017.03
broke the nsa310 and nsa325 targets. Also fix some redefines.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2017-03-27 08:09:00 +02:00
Felix Fietkau
ca44b9a0d4 pistachio: remove custom board detection override
Use device tree based model string

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:22 +01:00
Felix Fietkau
eb98bf605e pistachio: remove pistachio_board_name, use the generic function
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:22 +01:00
Ian Pozella
0d271cef80 target: add pistachio
The Pistachio target is a MIPS interaptiv based SoC developed by
Imagination Technologies. It includes blocks for i2c, spi, audio,
usb and WiFi.

This also adds the base support for the 'Creator Ci40 (marduk)'
device which uses the Pistachio SoC to create an IoT hub by
including Bluetooth, WiFi and 6lowpan on one board. Additionally 2x
Mikrobus ports are available to expand with further RF technologies
or add sensors. You can find out more here http://creatordev.io.

Note, this commit is just the initial board support hence the
following are not expected to work yet:
 * WiFi
 * Bluetooth
 * 6lowpan
 * Audio
 * Mikrobus uarts, user leds (clock dependency of 6lowpan chip)

The aim of this commit is to essentially have the same level of
support that currently exists in the mainline kernel.

Signed-off-by: Abhijit Mahajani <Abhijit.Mahajani@imgtec.com>
Signed-off-by: Francois Berder <francois.berder@imgtec.com>
Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
Signed-off-by: Mayank Sirotiya <Mayank.Sirotiya@imgtec.com>
Signed-off-by: Sean Kelly <Sean.Kelly@imgtec.com>
2017-03-22 11:43:22 +01:00
Felix Fietkau
7e798dab56 lantiq: remove lantiq_board_name, use the generic function instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:21 +01:00