Commit graph

389 commits

Author SHA1 Message Date
Camille Bilodeau
bdd3c94872 uboot-envtools: add Arduino Yun support
Signed-off-by: Camille Bilodeau <camille.bilodeau@protonmail.com>
2017-06-29 10:37:36 +02:00
Daniel Golle
5e4bb476c0 kexec-tools: bump version and add support for crashdump kernel
split kexec-tools into two packages, kexec and kdump.
* kexec to simply execute a new kernel
* kdump is for loading and collecting debris of a crashed kernel with
  support for kdump forensics.

In order to properly support booting into a crashkernel, an init script
as well as UCI configuration has been added.
As modifying the kernel cmdline is required for this to work in x86
platforms use an uci-defaults script to modify /boot/grub/grub.cfg.

To test collecting crash information, use the 'c' sysrq-trigger, ie.
echo c > /proc/sysrq-trigger

This should result in the crash kernel being executed and (depending
on the configution) dmesg and/or vmcore getting saved.

To check if the crash kernel was loaded properly, use the 'status'
command of the kdump init script.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-06-09 22:21:25 +02:00
Alif M. Ahmad
415c47de79 package/grub2: update to 2.02
Update to version 2.02

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-06-07 18:31:10 +02:00
Martin Schiller
d189fe62cd uboot-lantiq/spl: fixed uninitialized variable len in spl_uncompress_lzo
This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck)

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-05-31 08:41:31 +02:00
Martin Schiller
bbb27b1b22 uboot-lantiq: Support newer versions of the PEF7071 ethernet
This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck)

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-05-31 08:41:16 +02:00
Marty Plummer
558d86923e ar71xx: add support for EnGenius ENS202EXT
EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.

The device is based on Qualcomm/Atheros AR9341 v1.

Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button

Flash instructions:

You have three options:

- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.

- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.

- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:

*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
      stat -- Status
       sys -- System
    wless2 -- 2.4G-Wireless
      mgmt -- Management
      tree -- Tree
      help -- Help
    reboot -- Reboot
ens202ext>mgmt
  Management
---========= Commands Help =========---
     admin -- Administration
     mvlan -- Management VLAN settings
      snmp -- SNMP settings
    backup -- Backup/Restore settings
    autorb -- Auto reboot settings
   fwgrade -- Firmware upgrade
      time -- Time settings
   wifisch -- Wifi schedule
       log -- Log
      diag -- Diagnostics
      disc -- Device Discovery
    logout -- Logout
      help -- Help
      exit -- Exit
ens202ext/mgmt>fwgrade
  Management --> Firmware upgrade
---========= Commands Help =========---
      fwup -- Firmware upgrade
      help -- Help
      exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin

Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
2017-05-30 14:15:25 +02:00
Josua Mayer
e2814f6416 u-boot-mvebu: clearfog: enable setexpr command
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
c4f9474059 u-boot-mvebu: clearfog: implement distro-boot
Add a patchfile that implements distro-boot and is meant to go upstream
Also make the other patches git-am'able for easier maintenance.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
86c4144571 u-boot-mvebu: update to 2017.03
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Mantas Pucka
cd9d0f9e97 uboot-envtools: add support for 8devices Rambutan
Signed-off-by: Mantas Pucka <mantas@8devices.com>
2017-05-15 22:43:33 +02:00
Marko Ratkaj
ee1cee2cac mvebu: add ClearFog Base support
Add support for SolidRun ClearFog Base board.

The base model is a smaller version of ClearFog Pro without
the DSA switch, replacing it with a second copper gigabit
port, and only one PCIe socket.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Marko Ratkaj
ec4a8c6dee mvebu: ClearFog renamed upstream to ClearFog Pro
The conventional model is now known as the "Clearfog Pro"

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Alexander Couzens
21c2e93e67
uboot-omap: rename patch to 101-disable-thumb-omap3.patch
It's disabling thumb for the whole omap3 family.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-30 12:19:07 +02:00
Alexander Couzens
ca8988614c uboot-omap: enable thumb for overo
Even it's unknown if it's booting with thumb, because the lack of hardware.
Enable it for now, so the build succeed, because without thumb it can not fit
into spl.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-30 12:17:30 +02:00
Alexander Couzens
23fc55e723 package/uboot-omap: add am335x_boneblack
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
a5eb9c6370 package/uboot-omap: add default uEnv to boot via mmc card
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
147e18bdbd package/uboot-omap: re-introduce patches dropped by update to v2017.01
The beagleboard doesn't boot with Thumb enabled, but without Thumb the
SPL (first stage bootloader) is too big to fit into SRAM.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
e2caa74a2f package/uboot-omap: install image to STAGING_DIR_IMAGE
to use them later by image/Makefile to create full working sdcard images

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
4ac4148cc4 package/uboot-omap: assign BUILD_DEVICES most boards
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Mathias Kresin
18618695ae ramips: dont replace the board name
Use fixed led names and add each board variant instead of manipulating
the board name.

It makes the ramips board name function less different to the one used
in other targets and allows to merge them with a common function.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-21 07:47:59 +02:00
Alif M. Ahmad
ffd055d5bb grub2: update to 2.02~rc2
Update to version 2.02~rc2.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-04-12 11:24:57 +02:00
Felix Fietkau
8b8ce566d9 uboot-ar71xx: fix build error
The HOSTCFLAGS override only works on newer u-boot versions

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-06 16:25:08 +02:00
Felix Fietkau
68139cc0e8 u-boot.mk: pass HOSTCC and HOST_CFLAGS into the build
Cuts build time on Mac OS X in half by avoiding repeated $(shell) calls
from the build system

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-04 12:34:23 +02:00
Felix Fietkau
2526d150dc uboot-lantiq: fix build error on mac os x
asm/* includes are not safe for the host build

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-04 12:33:34 +02:00
Philip Prindeville
dfacdc6a99 kexec-tools: get kexec running on MUSL and x86 hardware
Couple of important upstream patches (slated for 2.0.15) that
are necessary for kexec to run on MUSL and on x86 hardware.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-04-03 08:50:57 +02:00
Paul Wassi
55920643b1 package/boot/uboot-kirkwood: fix build errors for nsa310 and nsa325
With upstream changes, the last update to U-Boot 2017.03
broke the nsa310 and nsa325 targets. Also fix some redefines.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2017-03-27 08:09:00 +02:00
Felix Fietkau
ca44b9a0d4 pistachio: remove custom board detection override
Use device tree based model string

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:22 +01:00
Felix Fietkau
eb98bf605e pistachio: remove pistachio_board_name, use the generic function
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:22 +01:00
Ian Pozella
0d271cef80 target: add pistachio
The Pistachio target is a MIPS interaptiv based SoC developed by
Imagination Technologies. It includes blocks for i2c, spi, audio,
usb and WiFi.

This also adds the base support for the 'Creator Ci40 (marduk)'
device which uses the Pistachio SoC to create an IoT hub by
including Bluetooth, WiFi and 6lowpan on one board. Additionally 2x
Mikrobus ports are available to expand with further RF technologies
or add sensors. You can find out more here http://creatordev.io.

Note, this commit is just the initial board support hence the
following are not expected to work yet:
 * WiFi
 * Bluetooth
 * 6lowpan
 * Audio
 * Mikrobus uarts, user leds (clock dependency of 6lowpan chip)

The aim of this commit is to essentially have the same level of
support that currently exists in the mainline kernel.

Signed-off-by: Abhijit Mahajani <Abhijit.Mahajani@imgtec.com>
Signed-off-by: Francois Berder <francois.berder@imgtec.com>
Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
Signed-off-by: Mayank Sirotiya <Mayank.Sirotiya@imgtec.com>
Signed-off-by: Sean Kelly <Sean.Kelly@imgtec.com>
2017-03-22 11:43:22 +01:00
Felix Fietkau
7e798dab56 lantiq: remove lantiq_board_name, use the generic function instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:21 +01:00
Felix Fietkau
5c617aec05 uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 09:45:18 +01:00
Paul Wassi
c95c3165b9 package/boot: update uboot-kirkwood to 2017.03
Bump uboot-kirkwood to upstream release 2017.03

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2017-03-20 08:19:35 +01:00
Alex Samorukov
ffa9f3d74b packge/boot/rbcfg: add new boot constants found in the recent Mikrotik devices
Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
2017-02-26 13:31:43 +01:00
Alif M. Ahmad
399cbbd127 grub2: update to 2.02~rc1
Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-02-26 13:31:32 +01:00
Yangbo Lu
0e5d67d483 layerscape: add LS1043A Rev1.1 support
Backport kernel patches for LS1043A Rev1.1 support from upstream,
patchwork, and SDK. And update to latest u-boot to support LS1043A
Rev1.1.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-02-26 08:41:40 +01:00
Alexandru Gagniuc
43b6d3f059 uboot-omap: Makefile: Include kernel.mk
This is needed for the definition of $(LINUX_DIR). This is used in
u-boot.mk to change the device-tree compiler to the dtc used by
linux.

Without this, the build will use the system dtc. This results in a
build failure when a dtc does not exist outside the buildroot.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-02-23 16:43:01 +01:00
Alexandru Gagniuc
a4def18f29 uboot-omap: Update to u-boot v2017.01
Specifying USE_PRIVATE_LIBGCC is no longer needed, as it is the
default.

Patch 001 is removed, since it was already merged upstream. Patches
100 and 101 are removed because they do not appear to be needed
anymore, and they do not conform with the sign-off and commit message
procedures.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-02-20 09:12:04 +01:00
Alexandru Gagniuc
b132d4fb91 uboot-omap: Do not hide bootloader packages
Because they were hidden, there was no way to disable the uboot
targets in menuconfig, so they had to be built every time. The omap
target is the only one to hide uboot packages. To be consistent with
the other targets, and have more control over the build, un-hide the
u-boot packages.

Note that the default behavior remains unchanged, as uboot will be
built unless explicitly disabled.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-02-20 09:12:04 +01:00
Alberto Bursi
3b90ed8c18 uboot-kirkwood: fix usb of nsa310b u-boot
fixes issue "nsa 310b u-boot can initialize usb but cannot
use usb storage so it cannot load files from usb"

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-14 12:26:20 +01:00
Sven Eckelmann
2696b0ec1e package/uboot-envtools: add OpenMesh A40 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2017-02-14 12:18:05 +01:00
Sven Eckelmann
bddb243640 package/uboot-envtools: add OpenMesh a60 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2017-02-14 12:18:05 +01:00
Sven Eckelmann
88aa7eeee5 package/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2017-02-14 12:18:05 +01:00
Alberto Bursi
add1dd0081 uboot-kirkwood: add Zyxel NSA325 uboot
add uboot for NSA325

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-11 21:16:28 +01:00
Alberto Bursi
760185972f uboot-envtools: add nsa325 envs
adding nsa325 envs for consistency with other kirkwoods

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-11 21:16:28 +01:00
Alberto Bursi
a9d347c11c uboot-kirkwood: fix goflexhome/net bootcommand
Goflexhome/net use uImage, and to boot an uImage the u-boot
must use bootm command, not bootz.

Fixes the "i cannot boot LEDE with this u-boot" issue that I
found out myself with my goflexnet.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-09 12:26:48 +01:00
Alberto Bursi
a6ef5933f8 uboot-kirkwood: remove obsolete patches
all patches for CONFIG_SYS_GENERIC_BOARD are obsolete for
uboot 2016 sources.

Run-tested with the uboot of goflexnet, also the md5sum of
all other uboots is the same with or without these patches.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-09 12:26:42 +01:00
Jo-Philipp Wich
475da81ec0 ixp4xx: put apex images into image staging directory
Do not put the apex images into the kernel build directory as this directory
might get removed after kernel updates while the apex packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich
e0579aecf8 mxs: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich
7f9d537f21 oxnas: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich
cf3d1b61bf sunxi: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00