Commit graph

13043 commits

Author SHA1 Message Date
Luka Perkov
0847247129 mvsw6171: note support for 88E6172 switches
The '6171 and '6172 are similar enough to work
without any changes to the code.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43753
2014-12-19 22:02:59 +00:00
Luka Perkov
873202fc0b kirkwood: add *plugs to uci-defaults
Set defaults health led to a timer heartbeet (200/800)
and populate network for:

- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43752
2014-12-19 11:05:13 +00:00
Luka Perkov
39743e45f8 kikwood: populate kirkwood.sh with new boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43751
2014-12-18 18:38:43 +00:00
Luka Perkov
ec9a0f898a kirkwood: set default EA4500 switch config
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43750
2014-12-18 18:38:38 +00:00
Hauke Mehrtens
abca0462d3 kernel: bgmac: fix some problems
There are some problems in the napi usage that are fixed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43749
2014-12-18 16:25:22 +00:00
Hauke Mehrtens
192e945479 bcm53xx: PCIe: add link check again
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43748
2014-12-18 16:23:42 +00:00
Felix Fietkau
4ccf215a3e ar7: remove leftover 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43746
2014-12-18 11:57:42 +00:00
Felix Fietkau
4571fc780d ar71xx: add support for qca956x soc
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.

tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43744
2014-12-18 11:28:53 +00:00
Felix Fietkau
2f9b042d69 ar8216: Inline function ar8xxx_create_mii
Inline function ar8xxx_create_mii.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43743
2014-12-18 11:28:47 +00:00
Felix Fietkau
2289c7a010 ar8216: Remove read/write/rmw member functions from ar8xxx_priv
Remove read/write/rmw member functions from ar8xxx_priv

There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43742
2014-12-18 11:28:39 +00:00
Felix Fietkau
45a494b808 ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43741
2014-12-18 11:28:34 +00:00
Felix Fietkau
0e7f844c66 ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43740
2014-12-18 11:28:28 +00:00
Felix Fietkau
054767cebc ar8216: remove unused function parameter in ar8327_led_register
Remove unused function parameter in ar8327_led_register.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43739
2014-12-18 11:28:20 +00:00
Rafał Miłecki
e21e9c5548 bcm53xx: backport spi-nor changes and update bcm53xxspiflash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43738
2014-12-17 14:53:25 +00:00
Felix Fietkau
d27c682def kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43736
2014-12-17 12:27:14 +00:00
Luka Perkov
309e74b86d kirkwood: add sheevaplug and derivatives
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2

Signed-off-by: Gérald Kerma <drEagle@doukki.net>

SVN-Revision: 43735
2014-12-17 08:33:55 +00:00
Imre Kaloz
211cac98d5 Belkin AC 1750 DB (F9K1115v2) support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43734
2014-12-17 08:27:38 +00:00
John Crispin
0ffb7323d0 ralink: remove partitoon map from mt7621.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43720
2014-12-15 15:55:37 +00:00
Rafał Miłecki
dd9ca05249 bcm53xx: sysupgrade support for devices with serial flash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43719
2014-12-15 15:43:46 +00:00
Rafał Miłecki
c3e9796cd5 brcm47xx: extract magics from specific upgrade images (and still reject them)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43718
2014-12-15 11:09:14 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Rafał Miłecki
a5b6b7e419 brcm47xx: detect (and still reject for now) CyberTAN fw format
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43714
2014-12-15 09:59:44 +00:00
Rafał Miłecki
fbea00b031 ramips: update mtd patches to apply after changes from r43700
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43709
2014-12-15 09:10:43 +00:00
Rafał Miłecki
b5b4bdc066 brcm47xx: use separated function in upgrade to detect file type
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43708
2014-12-15 08:51:14 +00:00
John Crispin
2db6da5532 kirkwood: enable EA4500 switch on 3.18
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43704
2014-12-14 08:57:58 +00:00
John Crispin
374ab9decc gemini: update usb driver and merge registers into one patch
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43703
2014-12-14 08:57:52 +00:00
John Crispin
fef7b4241f gemini: merge register ethernet patches into one
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43702
2014-12-14 08:57:43 +00:00
John Crispin
6f2b7567b8 ralink: drop old pinmux nodes from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43701
2014-12-14 08:57:16 +00:00
Rafał Miłecki
b1bfed548c kernel: warn users to use the new (dedicated) firmware splitter
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43700
2014-12-14 00:35:03 +00:00
Rafał Miłecki
2b4fbeb6d4 kernel: move old firmware uimage splitter into separated patch
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43696
2014-12-13 20:06:47 +00:00
Felix Fietkau
e984869e22 realview: drop old kernel configs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43692
2014-12-13 11:55:59 +00:00
Felix Fietkau
cfe3280494 au1000: remove leftover 3.3 kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43691
2014-12-13 11:55:49 +00:00
Felix Fietkau
511fadd857 au1000: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43690
2014-12-13 11:55:41 +00:00
Felix Fietkau
0f25db1a7d rb532: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43689
2014-12-13 11:55:32 +00:00
Felix Fietkau
d34e2a337c at91: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43688
2014-12-13 11:55:24 +00:00
Felix Fietkau
45380ebd1a brcm2708: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43687
2014-12-13 11:55:11 +00:00
Felix Fietkau
170ce29617 ixp4xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43686
2014-12-13 11:55:04 +00:00
Felix Fietkau
c7e8b5ebbd lantiq: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43685
2014-12-13 11:54:57 +00:00
Felix Fietkau
daeec86fba mpc85xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43684
2014-12-13 11:54:49 +00:00
Florian Fainelli
8692819c2c netlogic: fix XLR network driver build
Backport an upstream submission to fix xlr_net

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43682
2014-12-13 08:08:30 +00:00
John Crispin
263070a2e7 ramips:Add support for Aigale Ai-BR100
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 43681
2014-12-13 08:07:03 +00:00
John Crispin
aa697f1313 mxs: indention and whitespace fixes
Align this file with the style of most other modules.mk.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43680
2014-12-13 08:06:22 +00:00
John Crispin
a28d07abbe ar71xx: add an extra check on board_name for ath10k firmware patchs
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.

SVN-Revision: 43679
2014-12-13 08:06:01 +00:00
John Crispin
10dbdb28d7 oxnas: fix gpio-fan on kd20
define speed-map and include kmod-hwmon-gpiofan in kd20 profile

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43678
2014-12-13 08:04:54 +00:00
John Crispin
9013a144fd oxnas: also make use of the GPIO poweroff driver
Works great to power-off the kd20 ;)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43677
2014-12-13 08:02:52 +00:00
John Crispin
4a7c88f139 kernel/generic: remove some left-over garbage from ledtrig patch
cosmetics. clean a style issue introduced by r43674.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43676
2014-12-13 08:00:22 +00:00
John Crispin
118534ea39 oxnas: use libata ledtrig support for kd20 hdd leds
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43675
2014-12-12 20:24:33 +00:00
John Crispin
ee6b5c6007 kernel/generic: add ledtrig support to libata
SVN-Revision: 43674
2014-12-12 20:24:21 +00:00
John Crispin
1701a9a4b9 oxnas: clean up default package selection
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43673
2014-12-12 20:24:13 +00:00
John Crispin
d7b4bf8966 kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43670
2014-12-12 17:14:14 +00:00
Felix Fietkau
5b16fd1bf8 ar8216: enable cpu port to receive arp and broadcast frames for ar8236
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43668
2014-12-12 16:23:29 +00:00
John Crispin
6c4e7b22eb ralink: fix lenovo y1 wan port mapping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43667
2014-12-12 16:17:31 +00:00
John Crispin
7068b7ed1c oxnas: build S-ATA driver as a module
From: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43665
2014-12-12 16:17:13 +00:00
John Crispin
b1f7a027da ralink: make uartf functional on AWM002
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43664
2014-12-12 16:17:03 +00:00
John Crispin
58a4113c5e oxnas: use u-boot.bin in KDIR
This fixes building *u-boot-initramfs.bin images using ImageBuilder

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43663
2014-12-12 16:16:57 +00:00
Zoltan Herpai
8feb491156 sunxi: fix led on bananapi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43661
2014-12-12 16:11:17 +00:00
Zoltan Herpai
92cf73cf11 mxs: allow bootloader to pass kernel cmdline
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43657
2014-12-12 13:37:21 +00:00
Zoltan Herpai
a1467fb73b mxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43656
2014-12-12 13:18:29 +00:00
Zoltan Herpai
f34dfaf249 mxs: add i2c and spi packages to profiles
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43651
2014-12-12 12:14:40 +00:00
Zoltan Herpai
50f9d27da8 mxs: fix automatic status led detection
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43650
2014-12-12 12:01:39 +00:00
Zoltan Herpai
1014bb0fb4 mxs: update dts file for Duckbill
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43649
2014-12-12 11:43:56 +00:00
Zoltan Herpai
2265c4db31 mxs: i2c changes - add package for i2c module - remove i2c debug
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43648
2014-12-12 11:39:22 +00:00
Zoltan Herpai
fc2dff246d mxs: add kernel module for spi interface
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43647
2014-12-12 11:10:04 +00:00
Zoltan Herpai
276a732a77 mxs: make boardname consistent with other targets
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43646
2014-12-12 11:03:55 +00:00
Luka Perkov
a3eed6bc35 kernel: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43643
2014-12-11 23:29:07 +00:00
Luka Perkov
a2a6077fd0 kirkwood: sort 110-nas profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43642
2014-12-11 23:29:04 +00:00
John Crispin
21349229f7 au1000: revert 43626 due to syntax errors
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43641
2014-12-11 22:27:56 +00:00
John Crispin
ad35bcc41e oxnas: use ARM BCJ filter for XZ decompression
Restoring the config for kernel 3.14 didn't contain that change already
made to config-3.18.
It is needed to make squashfs in the kernel match the compression settings
for ARCH=arm in the framework.
If set to ARMTHUMB, boot fails due to squashfs being unreadable if the
filesystem was generated for wth ARM BCJ filter.

in include/image.mk:    BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
Thus the ARM filter is used for all ARM targets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43640
2014-12-11 20:41:51 +00:00
Rafał Miłecki
3aaee1ba02 bcm53xx: failsafe support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43639
2014-12-11 20:31:07 +00:00
Felix Fietkau
bb4ffcf928 xburst: fix subtarget config file names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43637
2014-12-11 20:07:52 +00:00
Felix Fietkau
4b80e52575 x86: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43636
2014-12-11 20:07:45 +00:00
Felix Fietkau
3cc3c0a518 octeon: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43635
2014-12-11 20:07:39 +00:00
Felix Fietkau
c095c7c202 adm8668: remove linux 3.3 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43634
2014-12-11 20:07:31 +00:00
Jonas Gorski
b7b52ce7de ar7: remove config-3.10
Remove a leftover file from the 3.10 support removal.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43632
2014-12-11 19:35:43 +00:00
John Crispin
6f4656c19b netlogic: sync kernel config
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43630
2014-12-11 18:58:12 +00:00
John Crispin
1ef2106725 ralink: mt7621 was missing a symbol that made the CC builder fail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43629
2014-12-11 18:54:30 +00:00
John Crispin
ce06a742c9 mcp85xx/p1020: fixup config-default
this was missed during the 3.14 bump

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43628
2014-12-11 18:39:22 +00:00
John Crispin
6d52fd203d kernel/modules: fix chipidea
it should needs to depend on imx and mxs

also remove duplicate kmod definition from mxs target

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43627
2014-12-11 18:35:41 +00:00
John Crispin
ed61e202a1 au1000: distinguish different models and set correct MAC-address
The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43626
2014-12-11 18:28:44 +00:00
Felix Fietkau
1558a6bcbf mpc85xx: fix another typo in the image makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43625
2014-12-11 18:18:16 +00:00
Felix Fietkau
5c89c4a5de mpc85xx: add missing devicetree ranges property for ethernet devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43624
2014-12-11 18:18:10 +00:00
Felix Fietkau
4db5bc59b1 mpc85xx: fix typo in image name
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43622
2014-12-11 17:52:12 +00:00
Felix Fietkau
2d9d3e7163 mpc85xx: fix initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43620
2014-12-11 15:29:39 +00:00
Rafał Miłecki
b55199cf41 bcm53xx: support LEDs on Buffalo devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43616
2014-12-11 11:23:26 +00:00
Luka Perkov
9a74026206 kirkwood: add 3.18 support
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43613
2014-12-11 01:20:41 +00:00
Rafał Miłecki
40d94a3ef0 bcm53xx: backport NVRAM driver sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43612
2014-12-10 21:50:57 +00:00
Rafał Miłecki
ba81966001 bcm53xx: use bcma callback in SPROM driver to fill the SPROM
This is required because it has to be called at very precise moment. See
comment in driver for details.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43611
2014-12-10 21:24:11 +00:00
Rafał Miłecki
b0b43e1ef9 bcm53xx: use static NVRAM pointer for now
This will allow us to sync with code sent for upstream.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43608
2014-12-10 19:56:56 +00:00
Luka Perkov
a1da38f7b1 kernel: drop CONFIG_PROC_DEVICETREE in 3.18
This option was removed in upstream commit 8357041.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43607
2014-12-10 18:55:53 +00:00
Rafał Miłecki
960130e99c bcm53xx: clean up nvram header
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43606
2014-12-10 18:29:26 +00:00
Luka Perkov
fa5f896cb7 kernel: add missing config symbols for 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43605
2014-12-10 18:13:34 +00:00
Rafał Miłecki
7093580424 bcm53xx: move SPROM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43604
2014-12-10 18:07:01 +00:00
Rafał Miłecki
27a91a99d9 bcm53xx: move NVRAM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43603
2014-12-10 18:01:24 +00:00
Rafał Miłecki
3fab0d818c bcm53xx: move NVRAM header to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43602
2014-12-10 17:37:24 +00:00
John Crispin
9432cbd577 oxnas: add support for 2nd S-ATA port to sata_oxnas driver
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.

this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43598
2014-12-10 15:51:07 +00:00
John Crispin
1fa7c8587d oxnas: add copyright header to sata_oxnas
sata_oxnas.c is obviously a refactored version of sata_ox820.c
which does contain this header.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43597
2014-12-10 15:51:00 +00:00
Luka Perkov
fd492354bb kernel: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43591
2014-12-09 23:29:52 +00:00
Luka Perkov
3b17625394 kirkwood: Iomega ix2-200: use all remaining MTD space for rootfs
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43590
2014-12-09 23:29:49 +00:00
Felix Fietkau
8c6f1412b1 ar71xx: improve ethernet driver cache footprint by removing an unnecessary pointer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43588
2014-12-09 12:28:46 +00:00
Felix Fietkau
27f36718d3 kernel: add a patch to make netfilter conntrack cache routing information
Significantly improves routing / NAT performance

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43587
2014-12-09 11:01:49 +00:00
Felix Fietkau
db04bbd2ec ar71xx: remove another leftover broken chunk of code in the unaligned access hacks patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43586
2014-12-09 09:38:33 +00:00
Rafał Miłecki
613bc3ef3f bcm53xx: bcm_nand: fix compilation
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43584
2014-12-08 18:28:54 +00:00
Rafał Miłecki
aed6b26431 bcm53xx: bcm_nand: switch from cmdlinepart to ofpart
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43580
2014-12-08 17:39:07 +00:00
Rafał Miłecki
73237c0c9b brcm47xx: add WNDR3400 V3 buttons
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43579
2014-12-08 17:02:28 +00:00
Jonas Gorski
bdb1ee51f8 brcm63xx: fix a few issues in irq chip drivers
Fix locking and lock usage, making it compile for SMP.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43578
2014-12-08 16:11:52 +00:00
Jonas Gorski
ed7d8a0450 brcm63xx: alphabetically order image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43577
2014-12-08 16:11:32 +00:00
Jonas Gorski
bc4dd8e119 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43576
2014-12-08 16:11:26 +00:00
Jonas Gorski
3fa17f6d58 brcm63xx: add DT support for USR9108
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43575
2014-12-08 16:11:08 +00:00
Jonas Gorski
218582e8ea brcm63xx: add DT support for F5D7633
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43574
2014-12-08 16:11:03 +00:00
Jonas Gorski
d5f1dd9079 brcm63xx: add DT support for DG834GT/PN
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43573
2014-12-08 16:10:54 +00:00
Jonas Gorski
b0ae41f849 brcm63xx: add DT support for TD-W8900GB
According to the vendor tarball, the TD-w8900GB's flash has 64k erase
block size, but CFE spans two blocks. So fixup the image offset
accordingly but keep block size at its default (64k).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: add commit message, add image offset, change nvram offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43572
2014-12-08 16:10:46 +00:00
Jonas Gorski
84200cf189 brcm63xx: add DT support for DSL-2640B
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43571
2014-12-08 16:10:41 +00:00
Jonas Gorski
929ade0648 brcm63xx: add DT support for CPVA642
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43570
2014-12-08 16:10:17 +00:00
Felix Fietkau
712f6ec52a kernel: update linux 3.18 to final release
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43569
2014-12-08 13:16:35 +00:00
Felix Fietkau
58de4a4759 kernel: backport an upstream xfrm crash fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43568
2014-12-08 12:50:37 +00:00
Felix Fietkau
0cebaafa6e kernel: add missing check for skb->dev on netfilter xfrm optimization patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43567
2014-12-08 12:21:17 +00:00
Felix Fietkau
14a163ca58 kernel: remove the obsolete vm_exports patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43565
2014-12-08 12:04:34 +00:00
Felix Fietkau
9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
Felix Fietkau
6327386aff ar71xx: fix invalid pointer accesses caused by unaligned access hacks (#18455)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43560
2014-12-08 10:48:28 +00:00
Felix Fietkau
0f07e7c9a8 x86: update to linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43559
2014-12-08 10:04:50 +00:00
Felix Fietkau
363b166eb9 x86: rename */config-3.10 to */config-default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43558
2014-12-08 10:04:45 +00:00
Felix Fietkau
0485747912 kernel: fix x86 objdump invocation on 3.14 and 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43557
2014-12-08 10:04:39 +00:00
John Crispin
7c7964e10d ar7: bump to 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43553
2014-12-08 06:15:03 +00:00
Florian Fainelli
aba92ec05e adm8668: switch to 3.14 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43552
2014-12-07 21:59:36 +00:00
Florian Fainelli
06152c8abf adm8668: add 3.14 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43551
2014-12-07 21:59:25 +00:00
Florian Fainelli
356447e6c2 adm8668: rename files to files-3.3
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43550
2014-12-07 21:58:49 +00:00
Florian Fainelli
bb9833a17a cobalt: remove 3.3 and 3.10 kernel configuration files
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43549
2014-12-07 21:58:33 +00:00
Florian Fainelli
4287370f76 cobalt: switch to 3.14 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43548
2014-12-07 21:58:22 +00:00
Florian Fainelli
35e8cc2cdc cobalt: add 3.14 kernel configuration file
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43547
2014-12-07 21:58:12 +00:00
Hauke Mehrtens
7a2f186d70 bcm53xx: update the NAND driver
This adds some updates to the NAND driver and refreshed the config.

Most of these changes are done in preparation for mainling it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43546
2014-12-07 21:55:21 +00:00
Hauke Mehrtens
664ae86dde bcm53xx: update the PCIe driver
This adds some updates to the PCIe driver and refreshed the config.

Most of these changes are done in preparation for mainling it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43545
2014-12-07 21:54:53 +00:00
Hauke Mehrtens
d9bb8326fa kernel: update bcma and ssb to wireless-testing master-2014-12-05
This brings ssb and bcma to wireless-testing tag master-2014-12-05

In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43544
2014-12-07 21:53:20 +00:00
John Crispin
7a65768ddc kirkwood: add a diag script
Currently only Linksys EA4500 is supported.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 43543
2014-12-07 16:53:37 +00:00
John Crispin
8a123f6f66 ramips: generate factory images for Nexx devices
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 43541
2014-12-07 16:53:22 +00:00
John Crispin
3572657c5a ar71xx: dev-eth: replace mdelay calls
Similar to patch 2. Replace further mdelay calls.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43540
2014-12-07 16:53:15 +00:00
John Crispin
59e7999a44 ag71xx: replace delay with sleep calls
I don't see that we're in an atomic context so there's no need to
busy-wait. Therefore replace the delay with sleep calls.
See also Documentation/timers/timers-howto.txt. It states:
"In general, use of mdelay is discouraged and code should
be refactored to allow for the use of msleep."

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43539
2014-12-07 16:53:09 +00:00
John Crispin
4caa8d50ad ag71xx: replace fixed PHY reset wait time in ar7240sw_setup
Replace the fixed wait time of 1s with polling for BMCR_RESET
to be cleared on all PHYs.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43538
2014-12-07 16:52:58 +00:00
Hauke Mehrtens
563f963b1b kernel: refresh patches for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43536
2014-12-07 16:12:44 +00:00
Hauke Mehrtens
8e738da02c brcm47xx: remove kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43535
2014-12-07 15:34:28 +00:00
Rafał Miłecki
dc6171c734 bcm53xx: 3.18: add early support for Buffalo WZR-900DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43534
2014-12-07 11:02:52 +00:00
Rafał Miłecki
a20fa1cb48 bcm53xx: add early support for Buffalo WZR-900DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43533
2014-12-07 10:55:44 +00:00
Rafał Miłecki
1020b84266 brcm47xx: add early support for WNDR3400 V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43532
2014-12-07 00:58:40 +00:00
Rafał Miłecki
9bec9b86af bcm53xx: backport BCM5301X patches from arm-soc.git next/dt
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43530
2014-12-05 16:46:55 +00:00
Rafał Miłecki
d1e0e39993 bcm53xx: squeeze (rename) BCM5301X patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43529
2014-12-05 16:15:16 +00:00
Rafał Miłecki
8ea3c20b23 bcm53xx: rename patches that were not upstreamed to 3xx
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43528
2014-12-05 16:13:27 +00:00
Rafał Miłecki
8033ccc975 kernel: update bcma up to 2014-10-27
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43527
2014-12-05 16:11:03 +00:00
John Crispin
c79ddb3773 octeon: sysupgrade: support config restore on ERL
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43524
2014-12-05 08:58:25 +00:00
John Crispin
1731d5520e octeon: sysupgrade: rename old kernel after mounting /boot
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43523
2014-12-05 08:58:18 +00:00
John Crispin
52f1d8ecdc octeon: sysupgrade: fix test for rootfs device
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43522
2014-12-05 08:58:06 +00:00
John Crispin
dcc20e525b oxnas: switch back to kernel 3.14
3.18 still got problems with stuck reboots if rootfs is ubifs...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43521
2014-12-05 00:20:50 +00:00