Commit graph

36013 commits

Author SHA1 Message Date
Mathias Kresin
a499d0a6b5 image: specify max image size in Kilobyte/Megabyte
Use the k and m unit suffix to be consistent with the blocksize.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 09:58:02 +02:00
Mathias Kresin
e7ec7a08aa image: use k as unit suffix for blocksize
Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:56:05 +02:00
Mathias Kresin
ddd259b0d5 image: pass device blocksize to padjffs2
At the moment the padding steps are hardcoded. Especially images for
devices with a 4K sector size can be unnecessarily bloated using the
hardcoded padding steps.

It has been observed that 192Kb of padding was added to the image of a
4MB device, albeit due to the 4K sector size the minimum required extra
padding for the jffs2 rootfs_data is 20Kb.

In worst case it means that the image-size check could fail albeit
there is enough space for all selected packages

For device build code not exposing the blocksize, use the hardcoded
padding further on.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:40:15 +02:00
Mathias Kresin
85fefcdb61 kernel: mtd: backport Macronix sector size fix
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 09:27:09 +02:00
Mathias Kresin
d7b6f0ea88 apm821xx: image: add support for k unit suffix to boot-img
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-08 20:14:42 +02:00
Mathias Kresin
3e7524c184 image: add support for k unit suffix to append-ubi
Allows to use the same unit for all definitions of the blocksize to be
consistent regardless of the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:51:58 +02:00
Mathias Kresin
b99a93ebaf image: add support for k unit suffix to pad-offset
Allows to specificy the padding and offset in kilobytes to be
consistent with pad-to.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:36:12 +02:00
Mathias Kresin
5369a03d52 ramips: use lower case names for TEW-69xGR images
Use lower case variant of the device name for to images to be
consistent with all other images names.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-09 07:12:37 +02:00
Mathias Kresin
775f93e898 ramips: fix wrong TARGET_DEVICES
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-08 23:51:46 +02:00
Mathias Kresin
034c5cb820 ramips: fix wrong device title
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-08 07:32:00 +02:00
Mathias Kresin
0ac50a661b firmware-utils: mksenaofw: rework option validation
The options firmware_type, vendor_id and product_id are not required
for decoding an image file.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-17 20:08:52 +02:00
Daniel Golle
083ef3fefe ramips: add support for Mercury MAC1200R v2
MT7628AN + MT7612E, 8MB SPI flash, 64MB DDR RAM
reset button GPIO is still missing (anyone?)
bootloader password is 'slp'

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-09-09 02:38:06 +02:00
Daniel Golle
943cf08fb7 oxnas: small image improvements for kd20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-09-09 02:16:22 +02:00
Rafał Miłecki
232767edf0 bcm53xx: enable switch port 5 on Tenda AC9
Now b53 forces port 5 link when needed, we can enable it on Tenda AC9
and start using eth1.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-08 23:24:43 +02:00
Rafał Miłecki
8072223347 kernel: b53: force BCM531x5 port 5 link state if enabled
Some devices (e.g. Tenda AC9 based on BCM47189B0) have BCM53125 with
port 5 connected to the second Ethernet interface on the SoC. In such
case there is no PHY and we need to force link manually.

This assumes port 5 can be marked as enabled for such devices. It's not
implemented yet unfortunately.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-08 23:03:46 +02:00
Rafał Miłecki
dd158ef346 bcm53xx: use upstream queued patches for R8500 and AC9
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-08 22:53:37 +02:00
Rafał Miłecki
29be50104e kernel: move bcma BCM53573 patch to bcma 4.9 backports
This patch has been accepted for 4.9.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-08 22:40:13 +02:00
Tim Harvey
7419b9497f imx6: override default inittab to add video console tty
Adds the following to the default inittab
tty1::askfirst:/bin/ash --login

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 15:28:39 +02:00
Tim Harvey
a2386c384d imx6: image: remove pca955x/ds1672/at24 from Ventana kernel modules
These need to be static in the kernel for Ventana

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 15:28:39 +02:00
Felix Fietkau
a1f83bad60 images: bump default rootfs size to 256 MB
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-08 15:28:39 +02:00
Felix Fietkau
dbbd5eef58 f2fs-tools: import from packages, clean up, and update to latest
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-08 15:28:38 +02:00
Kevin Darbyshire-Bryant
03cd416795 dnsmasq: Don't expose *.bind data incl version
Don't expose dnsmasq version & other data to clients via the *.bind
pseudo domain.  This uses a new 'NO_ID' compile time option which has been
discussed and submitted upstream.

This is an alternate to replacing version with 'unknown' which affects
the version reported to syslog and 'dnsmasq --version'

Run time tested with & without NO_ID on Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-09-08 15:28:38 +02:00
Felix Fietkau
c4bfb119d8 mac80211: remove the fq-disable hack, now that reordering is fixed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-08 15:28:38 +02:00
Felix Fietkau
a194ffd4a8 mac80211: fix packet loss on fq reordering
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-08 15:28:38 +02:00
Felix Fietkau
859d940c79 hostapd: update to version 2016-09-05
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-08 15:28:38 +02:00
Felix Fietkau
b6cd42a54e kernel: merge a softirq performance improvement patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-08 15:28:38 +02:00
Florian Fainelli
2728512e15 e2fsprogs: List all libraries explicitly
e2fsprogs would fail linking with external toolchains which would not be able
to find several dependencies, explicit them.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-09-08 13:40:03 +02:00
Florian Fainelli
9a2f2f32cf e2fsprogs: Honor the global verbose flag
Look for OPENWRT_VERBOSE and pass it down to the e2fsprogs entry-point
Makefile.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-09-08 13:40:03 +02:00
Christian Lamparter
e9f86c6cac apm821xx: backport generic HDD led-triggers for WNDR4700 and MBL
This patch backports the new generic HDD/SDD led-trigger
from 4.8-rc1.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-09-08 13:40:03 +02:00
Christian Lamparter
f7c1d9c8a5 apm821xx: detect sd-card media changes for the WNDR4700
The insertion or removal of the sd-card cannot be detected
by the hardware itself. This is by design. To workaround this,
for the WNDR4700 unload/load the dwc2 module in case the
the special SD CARD GPIO line is low/high.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-09-08 13:40:02 +02:00
Tim Harvey
1974ad5a96 cns3xxx: add GW2386 support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 13:40:02 +02:00
Tim Harvey
1419087a35 cns3xxx: add GW2394 Support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 13:40:02 +02:00
Pushpal Sidhu
4fd043b95b image.mk: Create a manifest file of installed packages as a build artifact
A few linux BSP's create a manifest file of installed packages for a given
target in order to help them understand exactly what's on their images. Create
one here as well as a build artifact since many users have an affinity to
prune down on packages to save valuable flash space.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 13:40:02 +02:00
Rafał Miłecki
42f559ed70 kernel: backport upstream overlayfs fixes
First two patches weren't marked for stable but are dependencies for
laters ones. The rest of patches was marked for stable but most likely
will be backported to 4.5+ only so we need to get them on our own.

An important fix is eea2fb4851e9d ("ovl: proper cleanup of workdir") as
it allows mounting overlayfs with dirty workdir, e.g. after power cut.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-06 21:37:49 +02:00
Micha Lenk
81dfbfb069 target/toolchain: Fix toolchain packaging without package build
If the toolchain is packaged for later use as external toolchain, the resulting
tarball is created in $BIN_DIR. But without building all packages first that
directory isn't created, hence 'make target/toolchain/compile' fails when
trying to create the toolchain tarball with error "Cannot open: No such file or
directory".

To fix that the $BIN_DIR is created before using it.

Signed-off-by: Micha Lenk <micha@lenk.info>
2016-09-06 11:40:12 +02:00
Kevin Darbyshire-Bryant
9209f4304b dnsmasq: fix remove pidfile on shutdown regression
Regression introduced by 3481d0d dnsmasq: run as dedicated UID/GID

dnsmasq is unable to remove its own pidfile as /var/run/dnsmasq is owned
by root and now dnsmasq runs as dnsmasq:dnsmasq.  Change directory
ownership to match.

dnsmasq initially starts as root, creates the pidfile, then drops to
requested non-root user.  Until this fix dnsmasq had insufficient
privilege to remove its own pidfile.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-09-06 11:26:05 +02:00
Petko Bordjukov
c5913264e7 mwlwifi: Expose the IEEE 802.11w support to hostapd
Add a dependency on DRIVER_11W_SUPPORT in order to enable the IEEE
802.11w functionality in hostapd.

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
2016-09-05 19:24:37 +02:00
Johannes Römer
e8cb7d30e9 hostapd: fix typo and indentation in ap_sta_support.patch
Signed-off-by: Johannes Römer <jroemer@posteo.net>
2016-09-05 18:03:24 +02:00
Alexis Green
aeea251fad ath10k-ct: fix missing symbols if ath9k is not selected
Require kernel to compile with CONFIG_RELAY=y

Signed-off-by: Alexis Green <alexis@cessp.it>
2016-09-05 18:01:59 +02:00
Felix Fietkau
49a6f67c39 mac80211: backport new register bitfield macros
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-05 17:46:26 +02:00
Felix Fietkau
9cf0444768 mac80211: add a tx sequence number allocation fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-05 14:02:34 +02:00
Christian Lamparter
78e63ce7e3 apm821xx: add size check for initramfs kernel for the Meraki MR24
Russell Senior reported an issue with the MR24 initramfs kernels:
> ## Booting kernel from Legacy Image at 00c10000 ...
>   Image Name:   POWERPC LEDE Linux-4.4.19
>   Created:      2016-08-31  11:57:05 UTC
>   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>   Data Size:    2155723 Bytes = 2.1 MiB
>   Load Address: 00000000
>   Entry Point:  00000000
>   Verifying Checksum ... OK
>Wrong Ramdisk Image Format
>Ramdisk image is corrupt or invalid

For the MR24, the kernel is uploaded to 0x10000. The ramdisk starts
at 0x200000. This leaves the kernel with just 0x1f0000 bytes = 1984kb.
This patch adds a size check so the image creation script will abort
instead of producing a unbootable initramfs image. A separate patch
"apm821xx: Fix initramfs image for the Meraki MR24" which fixed the
reported issue was submitted earlier.

Cc: Russell Senior <russell@personaltelco.net>
Cc: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-09-05 07:28:52 +02:00
riptidewave93
bc36678bdb apm821xx: Fix initramfs image for the Meraki MR24
When gzip is used, our kernel is too large and this causes the ramdisk
to be at the wrong offset. Fix by moving to lzma.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-09-05 07:28:44 +02:00
Karl Palsson
a4dc9ff934 dropbear: mdns flag is a bool, not integer
Effectively the same for most purposes, but more accurate.

Signed-off-by: Karl Palsson <karlp@etactica.com>
2016-09-05 07:27:16 +02:00
Karl Palsson
ad8d197b82 base-files: support oneshot leds properly.
oneshot trigger configurations for LEDs are created, but the on/off
timing configurations are ignored.  generate_config is correctly creating
oneshot configs, but the later led script doesn't recognise the trigger
details.

Fixes: c0c3f2d4c9 leds: support oneshot as well as timer triggers
Signed-off-by: Karl Palsson <karlp@etactica.com>
2016-09-05 07:27:15 +02:00
John Crispin
b5f7221afa fstools: fix logic bug in extroot verification code
Signed-off-by: John Crispin <john@phrozen.org>
2016-09-05 07:27:15 +02:00
John Crispin
81b779d4d9 ugps: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-09-05 07:27:15 +02:00
Conn O'Griofa
f362dc154d zram-swap: CONFIG_PROCD_ZRAM_TMPFS compatibility
Enable CONFIG_PROCD_ZRAM_TMPFS compatibility via two changes to list_cpu_idx():
* detect if /tmp is being used by /dev/zram0; if yes, offset initial value by 1 to skip first zram device.
* hot-add /dev/zram1, if not already present.

Signed-off-by: Conn O'Griofa >connogriofa@gmail.com>
2016-09-05 07:12:00 +02:00
Koen Vandeputte
911b6ca234 imx6: enable ARM crypto acceleration 2016-09-04 13:36:10 +02:00
Koen Vandeputte
0cf48c4407 imx6: refresh kernel config
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-09-04 13:36:10 +02:00