Commit graph

19807 commits

Author SHA1 Message Date
Roman Yeryomin
9f13cde1fa rb532: switch to 4.14
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-11-26 09:33:01 +01:00
Roman Yeryomin
920845357f rb532: add 4.14 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-11-26 09:31:50 +01:00
Martin Schiller
18398abe1e lantiq/basefiles: use shutdown instead of stop when the system goes down
I can't see any reason why we shouldn't use shutdown for lantiq as well.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2018-11-25 19:26:55 +01:00
Petr Štetiar
82b34c1f60 imx6: image: ventana: Add missing BOOT_SCRIPT variable
This is probably theoretical problem as the Ventana is defined first in
the image Makefile, but once the position of the definition would change
in the future (alphabetical sorting?) it would get bootscript from the
previous board which would have BOOT_SCRIPT set.

Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-25 19:23:03 +01:00
Daniel Golle
7c4251d881 ramips: select kmod-mt76x0e for TP-Link ArcherC20i and wr902ac-v3
Both devices come with a MediaTek MT7610E 5GHz 802.11ac 1T1R radio
which wasn't supported at the time the devices were added to OpenWrt.
Now that we got it, include kmod-mt76x0e in images for those devices.

Reported-by: Arian Sanusi <openwrt@semioptimal.net>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-25 15:24:49 +01:00
Daniel Golle
51c094e703 kernel: enable CONFIG_BRIDGE_VLAN_FILTERING
This allows us to use the bridge as a managed switch and gracefully
handle mixed tagged and untagged frames. Prior to this, the only
alternative was creating one bridge per vlan which quickly becomes a
nightmare and still won't let you mix both tagged and untagged frames on
the physical port without some complex ebtables magic.

This is in line with the notion that OpenWRT is the network go-to swiss
army knife when you need a nice set-and-forget, low maintenance box to
handle a specific task.

Current builds of the ip-bridge package already fully support this
feature so the only requirement is enabling the kernel config.

This is disabled by default so existing bridge configurations will not
be affected.  This patch only gives the ability to turn it on with an
'ip link' command.  If there is interest, I could look into making the
feature accessible via uci configuration.

It causes about 3.1% hit on raw bridging speed, which is relatively
trivial considering that I had to use 300 byte packets to strain the CPU
enough to notice a slowdown at all.  The ER8 would chug along at wire
speed otherwise, and that's using only one core.  Since the typical
bridge use case on OpenWRT is wireless, I doubt it would be noticeable
at all.

With BRIDGE_VLAN_FILTERING

iperf -u -c 192.168.1.105 -b 1G -l 300
------------------------------------------------------------
Client connecting to 192.168.1.105, UDP port 5001
Sending 300 byte datagrams, IPG target: 2.24 us (kalman adjust)
UDP buffer size:  208 KByte (default)
------------------------------------------------------------
[  3] local 192.168.1.12 port 58045 connected with 192.168.1.105 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec   977 MBytes   820 Mbits/sec
[  3] Sent 3414986 datagrams
[  3] Server Report:
[  3]  0.0-10.0 sec   811 MBytes   680 Mbits/sec   0.000 ms
581210/3414986 (0%)

Without BRIDGE_VLAN_FILTERING

iperf -u -c 192.168.1.105 -b 1G -l 300
------------------------------------------------------------
Client connecting to 192.168.1.105, UDP port 5001
Sending 300 byte datagrams, IPG target: 2.24 us (kalman adjust)
UDP buffer size:  208 KByte (default)
------------------------------------------------------------
[  3] local 192.168.1.12 port 36645 connected with 192.168.1.105 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec   977 MBytes   820 Mbits/sec
[  3] Sent 3414990 datagrams
[  3] Server Report:
[  3]  0.0-10.0 sec   836 MBytes   701 Mbits/sec   0.000 ms
493950/3414990 (0%)

In terms of kernel size, it uses 16KB (6753K vs 6737K on ER8) so a
0.002% hit.  The exact 16KB is probably just due to how the kernel is
compressed.

Suggested-by: Jonathan Thibault <jonathan@navigue.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-25 15:24:49 +01:00
Rafał Miłecki
18c5e7ba91 ath79: specify "firmware" partition format for Ubiquiti UniFi
This affects:
1. Ubiquiti UniFi-AC-LITE/LR
2. Ubiquiti UniFi-AC-PRO
3. Ubiquiti UniFi-AC-MESH
4. Ubiquiti UniFi-AC-MESH PRO

Succesfully tested on UniFi AP AC Pro.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-24 19:04:29 +01:00
Hannu Nyman
3e19113d5d ath79: specify "firmware" partition format for WNDR3700 and v2
Specify the new "firmware" partition format for Netgear WNDR3700
and WNDR3700v2 similarly as ffd082aa did for WNDR3800, the third
device in the family.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-11-24 13:15:55 +01:00
Rafał Miłecki
c8a005fefd ath79: specify "firmware" partition format for TP-LINK Archer C7 v2
With this change it doesn't require trying parsers one by one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-24 12:46:00 +01:00
Rafał Miłecki
c87d47aee8 kernel: drop unused arch_split_mtd_part()
No single target/arch uses it and most likely there is no need to make
such a potential code target/arch specific.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-24 12:24:02 +01:00
Rafał Miłecki
f995e143ba kernel: add missing version.h include to the TP-LINK parser
Fixes: a29c8d685b ("kernel: add DT binding support to the TP-LINK parser")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-24 11:48:47 +01:00
Rafał Miłecki
a29c8d685b kernel: add DT binding support to the TP-LINK parser
It allows triggering it directly by specifying format in the DT.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-24 09:56:53 +01:00
Rafał Miłecki
ffd082aa38 ath79: specify "firmware" partition format for Netgear WNDR3800
It doesn't require trying parsers one by one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-24 08:46:59 +01:00
Rafał Miłecki
a22311e6a6 kernel: add DT binding support to the uimage parsers
It allows specifying default and Netgear parsers directly in the DT.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-24 08:31:56 +01:00
Rafał Miłecki
934edb764d kernel: don't auto-split "firmware" if it has "compatible" DT property
If "compatible" is being used that should trigger a proper parser
directly. It's more reliable thanks to not trying parsers one by one. In
such case partition shouldn't be split automatically to avoid parsing it
twice.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-24 08:31:55 +01:00
David Bauer
6680fab947 kernel: b53: register switch on probe
Currently, the b53 MDIO switch driver registers the switch on
config-init and not on device probe. Because of this, the switch
gets added every time the associated interface comes up.

This commit fixes this behavior by registering the switch on device
probe.

Compile- and run-tested on OCEDO Koala.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-11-23 21:45:51 +00:00
Koen Vandeputte
3a1978bbb4 kernel: bump 3.18 to 3.18.126
Refreshed all patches.

Compile-tested: adm5120
Runtime-tested: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-22 12:40:19 +01:00
Koen Vandeputte
02e16e9e82 kernel: bump 4.14 to 4.14.82
Refreshed all patches.

Compile-tested: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-22 10:49:01 +01:00
Koen Vandeputte
e1debc557c kernel: bump 4.9 to 4.9.138
Refreshed all patches.

Compile-tested: ar71xx, layerscape
Runtime-tested: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-22 10:49:01 +01:00
Rafał Miłecki
d3381b5a64 bcm53xx: request Seama parser on DIR-885L directly
It's more reliable as mtd subsystem doesn't have to blindly try that
parser. It allows disabling MTD_SPLIT_FIRMWARE completely (TRX is
handled in a similar way).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-22 10:13:56 +01:00
Rafał Miłecki
dab5a93086 kernel: add DT binding support to the Seama parser
It allows specifying that parser directly in the DT.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-22 10:13:56 +01:00
Rafał Miłecki
4585cd3bdf kernel: move diff adding run_parsers_by_type() between mtd patches
It makes more sense to add run_parsers_by_type() in a patch that
introduces parser types. That makes the other one just add a code using
it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-20 14:44:01 +01:00
Rafał Miłecki
4d0431801d kernel: don't export parse_mtd_partitions_by_type() in 4.9 and 4.14
That function isn't used anywhere out of the mtdpart.c & can be static.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-20 14:44:01 +01:00
Rafał Miłecki
9b8a955358 kernel: drop mtd_pad_erasesize() helper from 4.9 and 4.14
It has been last used in kernel 3.18 for uimage and squashfs splitters
embedded in the mtdpart.c.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-19 13:33:05 +01:00
Rinki Kumari
dd02a19ff5
ar71xx: fix TP-Link Archer C7 v5 switch LEDs
Signed-off-by: Rinki Kumari <rinki13@gmail.com>
2018-11-17 16:27:38 +01:00
Pau Escrich
15f16bf05b ar71xx: add support for Gainstrong MiniBox V3.2
Adds MiniBox V3.2 ar71xx target (QCA99531 + QCA9887)
Info: http://oolite.cn/minibox-v3-2-qca9531-qca9887-module-pin-specification.html
Reference patch: http://oolite.cn/wp-content/uploads/2017/09/minibox_v3_cc15.05_20160325.patch
Installation: Upload firmware to uboot via HTTP at 192.168.1.1 (press button for 5 seconds)

Signed-off-by: Pau Escrich <p4u@dabax.net>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(daniel@makrotopia.org: rebased and fixed conflicts, fixed LED name,
                        added ath10k eeprom)
2018-11-15 19:49:51 +01:00
Rafał Miłecki
c6a1bcac16 kernel: fix ubifs loosing O_TMPFILE data after power cut
There was a bug in ubifs related to the O_TMPFILE. When reapplying
changes after power cut data could be lost. This problem was exposed by
overlayfs and the upstream commit 3a1e819b4e80 ("ovl: store file handle
of lower inode on copy up").

This fixes a regression introduced when switching from 4.9 to 4.14.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-15 12:32:20 +01:00
Koen Vandeputte
e14dc93073 kernel: bump 4.14 to 4.14.81
Refreshed all patches.

Removed upstreamed patches:
- 081-spi-bcm-qspi-switch-back-to-reading-flash-using-smal.patch

Altered patches:
- 0054-cpufreq-dt-Handle-OPP-voltage-adjust-events

Compile-tested on: cns3xxx, imx6, ipq806x, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-14 16:27:43 +01:00
Koen Vandeputte
7e20e4ab96 kernel: bump 4.9 to 4.9.137
Refreshed all patches.

Removed upstreamed hunks in:
- 703-phy-support-layerscape.patch

Compile-tested on: ar71xx, layerscape
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-14 16:27:43 +01:00
Koen Vandeputte
f7a406deaf kernel: bump 3.18 to 3.18.125
Refreshed all patches.

Compile-tested on: adm5120
Compile-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-14 16:27:43 +01:00
Stijn Tintel
e95e9fcbb2 kernel: bump 4.14 to 4.14.80
Refresh patches.

Compile-tested: ar71xx, ath79, x86/64
Runtime-tested: ar71xx, ath79, x86/64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-13 00:44:01 +02:00
Rafał Miłecki
0cf32de17c bcm53xx: add DT patch describing pins mux controller
It's needed to support new devices that use specific pin functions.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 22:29:16 +01:00
Rafał Miłecki
c7c4ae35d6 kernel: deprecate support for the generic "linux,part-probe" DT binding
It has been rejected upstream and instead a nice/more generic solution
has been implemented. It's possible now to describe partitions format
using "compatible" DT string.

No OpenWrt target uses "linux,part-probe" anymore, leave it only in case
some forks need it. It will be dropped with support for new kernels.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 14:57:45 +01:00
Rafał Miłecki
9a3c805584 ramips: use separated mtd patch reverting write_page() removal
This helps understanding mtd changes needed to get downstream NAND
driver working.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 13:31:47 +01:00
Rafał Miłecki
f975ab8f4e bcm53xx: update pinctrl driver
It's upstream now with a one trivial fix.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-09 07:41:36 +01:00
Daniel Golle
217fe505b6 oxnas: remove superseded sysupgrade image check
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-08 14:41:42 +01:00
Daniel Golle
b831eb5363 oxnas: kd20: correct memory size to 256MB
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-08 14:41:42 +01:00
Koen Vandeputte
b4e17a7440 ramips: fix netgear r6120 factory image generation
as indicated in commit c5bf408ed6 "(ramips: fix image generation for mt76x8")
more rework was needed to fix the other issues.

Building on another machine, but using the same arch, showed
the application failing again for different reasons.

Fix this by completely rewriting the application, fixing following found issues:

- buffer overflows, resulting in stack corruption
- flaws in memory requirement calculations (too small, too large)
- memory leaks
- missing bounds checking on string handling
- non-reproducable images, by using unitilized memory in checksum calculation
- missing error handling, resulting in succes on specific image errors
- endianness errors when building on BE machines
- various minor build warnings
- documentation did not match the code actions (header item locations)
- allowing input to be decimal, hex or octal now

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-08 13:32:22 +01:00
Felix Fietkau
b318edb999 ramips: add missing DTS frequency limit for the 5 GHz radio on Archer C20i
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-06 22:25:49 +01:00
Koen Vandeputte
74738c4b80 imx6: fix DMA transaction errors
Following errors were seen in the past on imx6 when using serial:

[ 22.617622] imx-uart 2020000.serial: DMA transaction error.
[ 22.623228] imx-uart 2020000.serial: DMA transaction error.
[ 22.628826] imx-uart 2020000.serial: DMA transaction error.
[ 22.648951] imx-uart 2020000.serial: DMA transaction error.
[ 22.654558] imx-uart 2020000.serial: DMA transaction error.
[ 22.660156] imx-uart 2020000.serial: DMA transaction error.

Which is the reason why DMA for the serial ports
got disabled in commits:

efb362cd93 ("imx6: disable dma on uart")
3b4241071d ("imx6: disable UART dma")

As indicated on mailinglist discussion, the cause seems to be
the usage of very old SDMA firmware which is present in the soc:

[    0.624302] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[    0.624318] imx-sdma 20ec000.sdma: Falling back to user helper
[   64.531607] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware

This patch adds the new firmware binary. (2196 bytes)

It is required to embed the binary into the kernel image, as it
gets loaded very early in the boot process where the rootfs is not
available yet:

[    0.622966] imx-sdma 20ec000.sdma: loaded firmware 3.3

Extended testing shows that the DMA errors are not seen anymore
when using this newer firmware version.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 11:49:27 +01:00
Koen Vandeputte
860de2e1aa ar71xx: disable some tiny targets with kernel 4.14
The bump to kernel 4.14 caused a massive increase in kernel size.

For most targets, switching them to dynamic partitioning allowed
to cope with this.

On some targets, the kernel partition is located behind the rootfs,
which disallows switching to dynamic partitioning as the boot location
would be altered, requiring a u-boot change.

Also within the tiny section, which disables kernel symbols etc
to decrease the image size,  the partition size is still too small.

Disable these targets for now, fixing image generation:

- Buffalo BHR-4GRV2
- Zbtlink ZBT-WE1526

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-05 16:00:06 +01:00
Koen Vandeputte
c764b2b531 kernel: bump 4.14 to 4.14.79
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-05 16:00:00 +01:00
David Bauer
5896b146a4 ipq40xx: fix NBG6617 LED mapping
The NBG6617's LEDs are wrongly identified in the 01_leds boardinit
script (board instead of boardname), resulting in referencing
non-existent LEDs in UCI.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-11-05 02:30:00 +00:00
Daniel Golle
9bcc08958b oxnas: add console=ttyS0,115200 argument to bootargs
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:37 +01:00
Daniel Golle
cf7896117b oxnas: enable image metadata by setting SUPPORTED_DEVICES
For each board, set the legacy name as well as the new based on the
compatible-string from devicetree.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:37 +01:00
Daniel Golle
ef9b169df0 oxnas: remove stray kernel config symbols
CONFIG_CRYPTO_* shouldn't be set by the target

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:36 +01:00
Daniel Golle
4f017c871d oxnas: switch to generic board detect
remove /lib/oxnas.sh platform-specific board-detection and use
generic which is based on device-tree compatible node instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-11-04 21:43:36 +01:00
Martin Weinelt
0411813c6f
ramips: fix leds on GL.iNet GL-MT300N-V2
The WAN LED now shows the link state. It's color is green,
not blue.

Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
2018-11-02 21:43:15 +01:00
Christian Lamparter
dceee8cc09 ipq-wifi: drop custom board-2.bins
The BDFs for all boards were upstreamed to the ath10k-firmware
repository and linux-firmware.git.

We switched to the upstream board-2.bin, hence the files can be removed
here.

Keep the ipq-wifi package in case new boards are added. It might take
some time till board-2.bins send upstream are merged.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:53 +01:00
Christian Lamparter
8b18fce3b8 ipq40xx: nbg6617: switch to upstream boardfile variant
The NBG6617's boardfile was merged and this device can
now switch to the upstream ath10k board-2.bin.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:53 +01:00