Commit graph

23725 commits

Author SHA1 Message Date
Gabor Juhos
89f690843f x86: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36250
2013-04-07 15:53:05 +00:00
Gabor Juhos
d1f28c6d1f ramips: add nor-flash node for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
Gabor Juhos
0c3c29ca38 ramips: fix pinmux settings for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
Gabor Juhos
66fbe78a93 ramips: pinmux fixes
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36247
2013-04-07 14:46:09 +00:00
Gabor Juhos
aedf05caa0 ramips: remove trailing whitespaces from dts files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
Gabor Juhos
017aabe292 ramips: handle PCI interrupts in plat_irq_dispatch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36245
2013-04-07 13:25:38 +00:00
John Crispin
811f7f9f2d fix typos inside dts files
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
John Crispin
709b19ed9f fix default commandline in dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
Gabor Juhos
85675528da ramips: add cfi_cmdset_0002 patches
The parallel flash access on the RT-N56U is broken
without those patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36242
2013-04-07 11:37:15 +00:00
Felix Fietkau
fde143b66f cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36241
2013-04-07 11:24:30 +00:00
Felix Fietkau
c270db592a gcc: remove the bogus CONFIG_TLS_SUPPORT symbol - TLS support is required by libc.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36240
2013-04-07 10:11:41 +00:00
Felix Fietkau
46072644e5 uClibc: unbreak ld-uClibc on non-64bit platforms
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36239
2013-04-07 10:11:38 +00:00
Gabor Juhos
10d8e4b66c ramips: remove top-level {address,size}-cells properties from .dts files
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
Hauke Mehrtens
4a46687d25 brcm47xx: use old partition names again for kernel 3.8
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

Thank you russell for spotting this problem.

SVN-Revision: 36235
2013-04-06 22:22:26 +00:00
Hauke Mehrtens
204bde8d98 brcm47xx: fix error in board detection when nvram is not available.
SVN-Revision: 36234
2013-04-06 19:02:25 +00:00
Gabor Juhos
d45ef216e6 linux/3.8: implement pcibios_get_phb_of_node for MIPS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36233
2013-04-06 17:33:03 +00:00
Gabor Juhos
51fa28e2c2 linux/3.8: backport devm_ioremap_resource from 3.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36232
2013-04-06 17:33:00 +00:00
Gabor Juhos
756b810178 ramips: fix ethernet switch node in DIR-645.dts
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
Gabor Juhos
747b795b56 generic: rtl8367: add compatible string with vendor prefix
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36230
2013-04-06 17:19:31 +00:00
Gabor Juhos
f5d8d80ca9 generic: rtl8367b: fix rtl8367b_extif_init_of
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36229
2013-04-06 17:03:09 +00:00
Gabor Juhos
32d3b456f0 linux/3.8: add more missing symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36228
2013-04-06 16:56:47 +00:00
Gabor Juhos
38b4865a68 package/kernel: only include i2c-of if CONFIG_OF enabled
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36227
2013-04-06 16:55:25 +00:00
Gabor Juhos
89539462a8 linux/3.8: add missing symbol
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36226
2013-04-06 16:38:36 +00:00
Gabor Juhos
fc0e720f53 kernel: fix md5sum for 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36225
2013-04-06 13:11:44 +00:00
Gabor Juhos
bf57f33f02 kernel: Allow talitos crypto hw module selection
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36224
2013-04-06 12:41:06 +00:00
Gabor Juhos
1ef39b43dd ramips: remove spi node from RTN56.dts
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
Gabor Juhos
d57e662cda ramips: fix ethernet switch node in RTN56U.dts
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
Gabor Juhos
4becd8590c ramips: rt3883: enable the RTL8367 driver
That is needed by the Asus RT-N56U board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
Gabor Juhos
38bd9b4337 generic: rtl8367: allow to load extif config from OF
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36220
2013-04-06 12:37:36 +00:00
Gabor Juhos
585d19d168 generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36219
2013-04-06 12:37:34 +00:00
Gabor Juhos
68c931c637 generic: rtl8367: add vendor prefix to the compatible string
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36218
2013-04-06 12:37:32 +00:00
Gabor Juhos
348640f4b3 ramips: rt3883: sync 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
John Crispin
d16de0b69f fix typo pinmmux -> pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
Gabor Juhos
f78c902cfd kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
Gabor Juhos
202fb45deb refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36214
2013-04-06 11:40:41 +00:00
John Crispin
df7af06f1f fix dir-615 h1 network config
http://patchwork.openwrt.org/patch/3527/

Signed-off-by: Daniel Petre <dani@ip6.ro>

SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
John Crispin
e1a74d8ff7 fix typo that made gpiomuxing fail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
Florian Fainelli
495296bba9 malta: add le64 and be64 sub targets
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36211
2013-04-05 12:36:48 +00:00
Florian Fainelli
12b925dcbf malta: move 32-bits options to subtarget config
Preliminary change to add support for MIPS64-based malta subtargets.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36210
2013-04-05 12:36:45 +00:00
Florian Fainelli
5eb8ba7f19 malta: move endianness kernel configuration to subtarget
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36209
2013-04-05 12:36:41 +00:00
Florian Fainelli
f4c09ea554 toolchain/uClibc: backport a MIPS64 fix from openadk
Fixes uClibc dynamic loader name requested by executables when
targetting MIPS64 n64

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36208
2013-04-05 12:36:37 +00:00
Florian Fainelli
463b80c3d1 toolchain/uClibc: handle different MIPS64 ABIs
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36207
2013-04-05 12:36:31 +00:00
Florian Fainelli
2f972664ec toolchain: musl is not available on MIPS64
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36206
2013-04-05 12:36:26 +00:00
Florian Fainelli
e032922266 toolchain: allow choosing the MIPS64 user-land ABI
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36205
2013-04-05 12:36:23 +00:00
Florian Fainelli
348cae15d2 buildroot: factor knowledge of a 64bits architecture
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36204
2013-04-05 12:36:19 +00:00
Florian Fainelli
46dfa04a08 malta: enable mips16 feature flag
The malta platform supports mips16 advertise this feature flag.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36203
2013-04-05 12:36:16 +00:00
Florian Fainelli
9e1d2c15d9 buildroot: allow enabling MIPS16 user-space build
Enabling MIPS16 is made conditional on advertising the "mips16" feature
for a specific target since it requires support from the CPU
(HAS_MIPS16) and the actual use of MIPS16 for building packages
(USE_MIPS16).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36202
2013-04-05 12:36:12 +00:00
Florian Fainelli
f223d0927e openssl: Pass in any TARGET_ASFLAGS
Packages not picking up the regular TARGET_AS need their openwrt
Makefiles tweaked. For a basic build, that's just openssl.

This depends on patch 1/5.

Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36201
2013-04-05 12:36:09 +00:00
Florian Fainelli
9dc38e48f7 toolchain/gcc: .init and .fini need to pick one ISA
The .init and .fini sections are built by concatenating code
fragments. Putting mips16 code in the middle of a mips32 code block
doesn't work. Make gcc built the magic crt stuff in no-mips16 mode.

This is specific to 4.6-linaro but is probably portable to other gcc
flavors. Adding this to the t-libgcc-mips16 makefile fragment is a
hack not suitable for pushing upstream, but there is no mips/t-linux
or mips/t-uclibc and I am not going to touch gcc/configure for two
lines.

Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36200
2013-04-05 12:36:06 +00:00
Florian Fainelli
750115a65c toolchain/uClibc: Disable mips16 for uClibc for now
For now, build uclibc without -mips16. There's no mips16 syscall
support AFAIK and uclibc uses inline assembly syscalls a lot.

In addition, touching errno means touching a TLS model symbol, and
that's not supported in gcc 4.6.

The __set_errno macro can be put back to calling
errno_location(). This allows much of the library to be built in
mips16 mode. I don't understand the implications to the thread library
of doing this.

A list of "build as -mno-mips16" C source files can be placed in the
mips architecture-dependent build files. Maintaining the list would be
no fun.

Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36199
2013-04-05 12:36:00 +00:00