Commit graph

8401 commits

Author SHA1 Message Date
Felix Fietkau
a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
SVN-Revision: 31736
2012-05-15 10:36:39 +00:00
John Crispin
364f47e454 code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
2012-05-15 09:38:05 +00:00
John Crispin
07dca108a9 adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
John Crispin
9785ec070e set 3.3.6 as default
SVN-Revision: 31733
2012-05-15 09:37:59 +00:00
John Crispin
c61ada1db8 set 3.3.5 as default
SVN-Revision: 31718
2012-05-14 16:11:26 +00:00
Gabor Juhos
2fceae7ec4 linux/3.0: R.I.P.
It is used by the broken omap35xx/gumstix target only.

SVN-Revision: 31717
2012-05-14 15:48:34 +00:00
Gabor Juhos
a3d349a3b3 realview: remove 3.0 support
SVN-Revision: 31716
2012-05-14 15:48:32 +00:00
Gabor Juhos
e2ecabd761 realview: switch to 3.3
SVN-Revision: 31715
2012-05-14 15:48:31 +00:00
Gabor Juhos
46c7d58726 realview: add 3.3 support
SVN-Revision: 31714
2012-05-14 15:48:29 +00:00
Gabor Juhos
8f629f2a22 linux/3.3: more missing config symbols
SVN-Revision: 31713
2012-05-14 15:48:23 +00:00
Felix Fietkau
fab5ee9566 imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450)
SVN-Revision: 31711
2012-05-14 14:00:01 +00:00
Hauke Mehrtens
a798a81890 kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
SVN-Revision: 31710
2012-05-14 11:28:02 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Hauke Mehrtens
679b6a0722 amazon: fix section mismatch
SVN-Revision: 31707
2012-05-13 15:31:42 +00:00
Hauke Mehrtens
abd74f86b4 amazon: update amazon target to kernel 3.3
This is just compile tested, my device is currently not working.

SVN-Revision: 31706
2012-05-13 15:10:40 +00:00
Gabor Juhos
60d3ffb49a gemini: remove 2.6.37 support
SVN-Revision: 31700
2012-05-13 12:04:04 +00:00
Gabor Juhos
672ff3de6e gemini: switch to 3.3
SVN-Revision: 31699
2012-05-13 12:04:02 +00:00
Gabor Juhos
d0ac4c1f03 gemini: add support for 3.3
SVN-Revision: 31698
2012-05-13 12:03:59 +00:00
Hauke Mehrtens
482b99a660 brcm47xx: generate image for Linksys WRT610N V1
SVN-Revision: 31696
2012-05-13 00:16:57 +00:00
Hauke Mehrtens
31c2c485c1 kernel: ssb: add PCI IDs 0x4322 and 43222
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.

SVN-Revision: 31695
2012-05-13 00:08:12 +00:00
Hauke Mehrtens
5acb0b72be brcm47xx: fix tg3 ssb patch
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).

SVN-Revision: 31694
2012-05-12 23:59:12 +00:00
Gabor Juhos
e710aeeab1 linux/2.6.38: R.I.P.
It is used only by the broken coldfire target.

SVN-Revision: 31688
2012-05-12 12:05:21 +00:00
Gabor Juhos
08ed044595 linux/2.6.37: R.I.P.
SVN-Revision: 31687
2012-05-12 12:05:19 +00:00
Gabor Juhos
c8cede6aa7 linux: add broken flag to remaining targets which are using 2.6.37
SVN-Revision: 31686
2012-05-12 12:05:18 +00:00
Gabor Juhos
a2efef024e iop32x: remove 2.6.37 support
SVN-Revision: 31685
2012-05-12 10:49:36 +00:00
Gabor Juhos
a5d4de7da2 iop32x: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31684
2012-05-12 10:49:34 +00:00
Gabor Juhos
598fe0e93b iop32x: add 3.3 support
SVN-Revision: 31683
2012-05-12 10:49:32 +00:00
Gabor Juhos
bf8e96712e sibyte: remove 2.6.37 support
SVN-Revision: 31682
2012-05-12 10:49:30 +00:00
Gabor Juhos
edb129bb24 sibyte: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31681
2012-05-12 10:49:28 +00:00
Gabor Juhos
fd651daa4b sibyte: add 3.3 support
SVN-Revision: 31680
2012-05-12 10:49:26 +00:00
Gabor Juhos
4f6acae5f7 ixp4xx: fix ixp4xx_crypto build error
SVN-Revision: 31679
2012-05-12 10:49:23 +00:00
Gabor Juhos
cabfa5b364 orion: remove the broken broken flag
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

SVN-Revision: 31674
2012-05-10 20:20:43 +00:00
Gabor Juhos
ec27c35ebe kirkwood: fix Kconfig symbol for NSA-310
SVN-Revision: 31673
2012-05-09 16:16:52 +00:00
John Crispin
dc4cfd3a64 Add 3.3 config files
SVN-Revision: 31672
2012-05-09 12:52:24 +00:00
John Crispin
75827c538d Add missing 3.3 patches
SVN-Revision: 31671
2012-05-09 12:52:21 +00:00
John Crispin
7d638fbb2f Drop 2.6.32 support
SVN-Revision: 31670
2012-05-09 12:52:19 +00:00
Gabor Juhos
200227e0b4 kirkwood: add support for the ZyXEL NSA-310
SVN-Revision: 31669
2012-05-09 11:38:43 +00:00
Gabor Juhos
213cbf4297 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31668
2012-05-09 11:38:41 +00:00
Gabor Juhos
d4876692c1 kirkwood: enable GPIO sysfs interface
SVN-Revision: 31667
2012-05-09 11:38:40 +00:00
Gabor Juhos
d1eed108bb kirkwood: nuke 2.6.37 support
SVN-Revision: 31666
2012-05-09 11:38:39 +00:00
Gabor Juhos
861b9b25e0 kirkwood: switch to 3.3
SVN-Revision: 31665
2012-05-09 11:38:37 +00:00
Gabor Juhos
b272041998 kirkwood: add 3.3 support
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31664
2012-05-09 11:38:36 +00:00
Gabor Juhos
500ec36515 ixp4xx: nuke 2.6.37 support
SVN-Revision: 31663
2012-05-09 10:48:44 +00:00
Gabor Juhos
d25a4e7ddc ixp4xx: switch to 3.3
SVN-Revision: 31662
2012-05-09 10:48:43 +00:00
Gabor Juhos
d5093de0b1 mpc85xx: remove 2.6.38 support
SVN-Revision: 31661
2012-05-09 10:48:41 +00:00
Gabor Juhos
ab71a428c5 mpc85xx: switch to 3.3 and add broken flag
It is compile tested only.

SVN-Revision: 31660
2012-05-09 10:48:39 +00:00
Gabor Juhos
db376b45d9 orion: nuke 3.0 support
SVN-Revision: 31659
2012-05-09 10:48:38 +00:00
Gabor Juhos
24e2385a59 orion: switch to 3.3 and add broken flag
It is compile tested only.

SVN-Revision: 31658
2012-05-09 10:48:37 +00:00
Gabor Juhos
d640a15b73 linux/3.3: add missing RTC symbol
SVN-Revision: 31654
2012-05-09 10:48:30 +00:00
Gabor Juhos
93c9980b94 ar71xx: fix build error if PCI is disabled
SVN-Revision: 31646
2012-05-07 21:16:22 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Gabor Juhos
6b5012ce1f pxa: remove 2.6.37 support
SVN-Revision: 31643
2012-05-07 17:40:15 +00:00
Gabor Juhos
1f1fd8616f pxa: switch to 3.3 and mark it as broken
It is working in qemu, but it has not been tested on real hardware.

SVN-Revision: 31642
2012-05-07 17:40:09 +00:00
Gabor Juhos
b284c0e804 pxa: add support for 3.3
SVN-Revision: 31641
2012-05-07 17:40:06 +00:00
Jo-Philipp Wich
1a01559520 atheros: Fix compilation
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.

Signed-off-by: Jonathan Bither <jonbither@gmail.com>

SVN-Revision: 31640
2012-05-07 17:06:39 +00:00
Jonas Gorski
b218b15709 bcm63xx: fix a race between PCI bus scan and fallback sprom registration
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

SVN-Revision: 31638
2012-05-06 21:25:34 +00:00
Felix Fietkau
0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
SVN-Revision: 31637
2012-05-06 21:19:14 +00:00
Hauke Mehrtens
d30f8da466 brcm47xx: add gpio_request_one()
This fixes a compile error with kernel 3.3.

SVN-Revision: 31635
2012-05-06 20:44:37 +00:00
Felix Fietkau
7799c88aa4 atheros: clean up the patches some more
SVN-Revision: 31626
2012-05-06 17:15:00 +00:00
Felix Fietkau
9b20187ad5 atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels
SVN-Revision: 31625
2012-05-06 17:08:30 +00:00
Jonas Gorski
30362b90af AR7: don't mark as broken
Linux 3.3.4 boots fine on my AR7 device.

SVN-Revision: 31623
2012-05-06 14:04:19 +00:00
Gabor Juhos
28e897845f ar7: remove 2.6.37 support
SVN-Revision: 31617
2012-05-05 17:32:43 +00:00
Gabor Juhos
047a51c4fd ar7: switch to 3.3 and mark the target as broken
SVN-Revision: 31616
2012-05-05 17:32:41 +00:00
Gabor Juhos
dd884a6b73 ar7: add 3.3 support
SVN-Revision: 31615
2012-05-05 17:32:39 +00:00
Gabor Juhos
e85a44f11b ar7: fix kernel_entry extraction
SVN-Revision: 31614
2012-05-05 17:32:36 +00:00
Gabor Juhos
9486904079 ar71xx: add profile and build image for the TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31610
2012-05-05 17:02:41 +00:00
Gabor Juhos
ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
2012-05-05 17:02:35 +00:00
Gabor Juhos
56f2e08537 ar71xx: update 3.3 patches
SVN-Revision: 31602
2012-05-05 13:56:35 +00:00
Gabor Juhos
8fffc6d6df ar71xx: fix a typo in the db120 mach file
Reported-by: Sven Eckelmann <sven@narfation.org>

SVN-Revision: 31601
2012-05-05 13:56:30 +00:00
Hauke Mehrtens
8c352ff853 brcm47xx: update target to kernel 3.3
SVN-Revision: 31599
2012-05-05 12:53:37 +00:00
Gabor Juhos
2e3f8c480e linux/2.6.32: R.I.P.
SVN-Revision: 31597
2012-05-05 11:43:34 +00:00
Gabor Juhos
e005aed223 rdc: remove 2.6.32 support
SVN-Revision: 31596
2012-05-05 11:43:32 +00:00
Gabor Juhos
0e086cfaf7 rdc: switch to 3.3 and mark the target as broken
SVN-Revision: 31595
2012-05-05 11:43:30 +00:00
Gabor Juhos
787b253859 rb532: remove 2.6.32 support
SVN-Revision: 31594
2012-05-05 11:43:29 +00:00
Gabor Juhos
63a532a472 rb532: switch to 3.3 and mark the target broken
SVN-Revision: 31593
2012-05-05 11:43:26 +00:00
Gabor Juhos
b120e7f22a rb532: add 3.3 support
SVN-Revision: 31592
2012-05-05 11:43:23 +00:00
Gabor Juhos
6caa1aab10 mpc83xx: remove broken flag
SVN-Revision: 31591
2012-05-05 11:43:21 +00:00
Gabor Juhos
257a201b56 mpc83xx: populate network config from an uci-default script
SVN-Revision: 31590
2012-05-05 11:43:19 +00:00
Gabor Juhos
13ce8f8a77 mpc83xx: cleanup rb333.dts
SVN-Revision: 31589
2012-05-05 11:43:16 +00:00
Gabor Juhos
a3d9877518 mpc83xx: fix MAC addresses on the RB333
SVN-Revision: 31588
2012-05-05 11:43:13 +00:00
Gabor Juhos
1a5a9c5dae mpc83xx: fix build warnings in RB333/600 dtb wrappers
SVN-Revision: 31587
2012-05-05 11:43:10 +00:00
Gabor Juhos
7ffa3fe02c linux/2.6.32: fix layer7 patch
SVN-Revision: 31586
2012-05-05 07:20:13 +00:00
Imre Kaloz
9a91dc9f71 upgrade to 3.3, enable framebuffer
SVN-Revision: 31576
2012-05-03 21:51:58 +00:00
Jonas Gorski
b393464fb4 adm5120: add missing NULL terminator to partition parser list
Fixes #11372.

SVN-Revision: 31574
2012-05-03 21:03:50 +00:00
Hauke Mehrtens
22b2e3fbb9 brcm47xx: add support for kernel 3.3
SVN-Revision: 31573
2012-05-03 20:18:41 +00:00
Gabor Juhos
3349cf2691 Fix iptables abuse of kernel header files. Use exported headers instead.
[juhosg: export xt_layer7.h for all kernel versions]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31566
2012-05-03 09:43:10 +00:00
Gabor Juhos
b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
Gabor Juhos
90e99b9fe8 ramips: Make serial console for DIR-300-B1 work again
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
Gabor Juhos
fb28062182 mpc83xx: remove 2.6.36 support
SVN-Revision: 31555
2012-05-02 18:27:26 +00:00
Gabor Juhos
3269924fed mpc83xx: switch to 3.3
SVN-Revision: 31554
2012-05-02 18:27:25 +00:00
Gabor Juhos
8ee595315d mpc83xx: add support for 3.3
SVN-Revision: 31553
2012-05-02 18:27:22 +00:00
Gabor Juhos
b4b5f2d018 linux/3.3: add more missing symbols
SVN-Revision: 31552
2012-05-02 18:27:19 +00:00
Florian Fainelli
5d9b44d110 use a define for the poll and debounce interval
SVN-Revision: 31550
2012-05-02 15:40:26 +00:00
Gabor Juhos
7a2b3d8a55 linux/3.3: add more missing symbols
SVN-Revision: 31548
2012-05-01 08:00:26 +00:00
Gabor Juhos
70322ba3d1 move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
SVN-Revision: 31547
2012-05-01 08:00:25 +00:00
Imre Kaloz
880de62f91 switch to 2.6.38
SVN-Revision: 31546
2012-05-01 07:00:17 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Gabor Juhos
e931ffd678 linux: rtl836x: add a generic reset_switch function
SVN-Revision: 31536
2012-04-29 18:29:31 +00:00
Gabor Juhos
1d9400263f linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup
SVN-Revision: 31535
2012-04-29 18:29:29 +00:00
Gabor Juhos
badd7a3cf2 linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops
SVN-Revision: 31534
2012-04-29 18:29:26 +00:00