KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
25812 commits 3 branches 0 tags 154 MiB
Commit graph

2155 commits

Author SHA1 Message Date
Gabor Juhos
e312a917d3 ar71xx: rename ath79_parse_mac_addr to ath79_parse_ascii_mac 
Rename the function and extend it in order to make it
usable from board setup code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38085
 2013-09-20 16:41:30 +00:00
Gabor Juhos
cf5891fb39 ar71xx: fix Cameo934x initramfs image generation 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38084
 2013-09-20 16:41:28 +00:00
Gabor Juhos
cd9ff05845 ar71xx: add profile and build image for the WD My Net N600 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38076
 2013-09-19 22:36:43 +00:00
Gabor Juhos
37968b3be1 ar71xx: add sysupgrade support for the WD My Net N600 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38075
 2013-09-19 22:36:42 +00:00
Gabor Juhos
7f9d2292fa ar71xx: add user-space support for the WD My Net N600 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38074
 2013-09-19 22:36:41 +00:00
Gabor Juhos
9a2e94476a ar71xx: add kernel support for the WD My Net N600 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38072
 2013-09-19 22:36:39 +00:00
Gabor Juhos
9200807877 ar71xx: wndr4300: enable HW ECC mode for the NAND controller 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38071
 2013-09-19 18:43:43 +00:00
Gabor Juhos
83915a8d78 ar71xx: add ath79_nfc_set_ecc_mode helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38070
 2013-09-19 18:43:42 +00:00
Gabor Juhos
d6fef0cb39 ar71xx: ar934x_nfc: add experimental support for hardware ECC 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38069
 2013-09-19 18:43:41 +00:00
Gabor Juhos
ceecdfb1c9 ar71xx: ar934x_nfc: return error code from some low-level functions 
Change some flow-level unctions to return with an
error code in order to be able to report errors
to the core code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38068
 2013-09-19 18:43:40 +00:00
Gabor Juhos
df8485c7cb ar71xx: ar934x_nfc: use devm_* functions 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38067
 2013-09-19 18:43:38 +00:00
Gabor Juhos
54c0e72f9d ar71xx: add profile and build image for the TL-MR13U board 
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38066
 2013-09-19 17:52:45 +00:00
Gabor Juhos
5e3c7d14ec ar71xx: add user-space support for the TL-MR13U board 
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38064
 2013-09-19 17:52:42 +00:00
Gabor Juhos
e3e31835ae ar71xx: add kernel support for TP-Link TL-MR13U 
This patch adds support for TP-Link TL-MR13U router with built-in 10AH
rechargeable battery.

The patch is based on kamwanlai's patch:
https://forum.openwrt.org/viewtopic.php?pid=206746#p206746

Updated to accommodate recent changes introduced with:
ar71xx: remove fs_* variables from image/Makefile

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
[juhosg:
  - refresh and rename rename 930-add-tl-mr13u-support.patch =>
    625-MIPS-ath79-add-tl-mr13u-support.patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38063
 2013-09-19 17:52:41 +00:00
Gabor Juhos
5e23012c77 ar71xx: wnr2200: fix a typo in a LED name 
Reported-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38062
 2013-09-19 17:52:40 +00:00
Gabor Juhos
fe781581df ar71xx: add profile and build image for the WNR2200 board 
Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38061
 2013-09-19 16:56:51 +00:00
Gabor Juhos
3d4b042c4b ar71xx: add user-space support for the WNR2200 board 
Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38060
 2013-09-19 16:56:50 +00:00
Gabor Juhos
49ed06e36f ar71xx: add kernel support for Netgear WNR2200 wireless router 
This patch adds OpenWRT support for the Netgear WNR2200 (N300)
wireless router with USB.

Technical details of this router can be found at
http://www.netgear.com/home/products/wirelessrouters/work-and-play/WNR2200.aspx
and http://wikidevi.com/wiki/Netgear_WNR2200

Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
[juhosg:
  - add commit message and SoB line from the original patch
  - remove dead code from mach-wnr2200.c
  - refresh 624-MIPS-ath79-WNR2200-support.patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38059
 2013-09-19 16:56:48 +00:00
Gabor Juhos
a0d6cd4f49 kernel/3.10: add new Kconfig option for firmware partition split 
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38002
 2013-09-15 17:03:29 +00:00
Gabor Juhos
554772a665 kernel: update 3.10 to 3.10.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38000
 2013-09-15 16:00:41 +00:00
Gabor Juhos
0aa1f0be43 ar71xx: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37976
 2013-09-13 17:29:16 +00:00
Gabor Juhos
9754aca374 ar71xx: add support for TL-MR3040 v2 
This patch adds support for building firmware images for the
TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37964
 2013-09-13 15:28:50 +00:00
Gabor Juhos
897c00c145 ar71xx: add wireless bgn led support for dir-825-c1 
I checked the GPL code drop from D-Link and tried to get the wireless
and LAN switch LEDs to light up. I found some references in
AthSDK/www/DIR-825_C1/bsp.h as well as
AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I
only got the led for 2.4GHz to work. Anyway, here's the patch.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37963
 2013-09-13 15:01:40 +00:00
Gabor Juhos
abad211388 ar71xx: use the lzma loader for the WRT160NL 
Partition layout before:
  0x000000040000-0x0000001a0000 : "kernel"
  0x0000001a0000-0x0000007e0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000
  0x000000350000-0x0000007e0000 : "rootfs_data"

after:
  0x000000040000-0x000000140000 : "kernel"
  0x000000140000-0x0000007e0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000
  0x0000002f0000-0x0000007e0000 : "rootfs_data"

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37915
 2013-09-07 11:40:45 +00:00
Gabor Juhos
07216b9f46 ar71xx: fix NetGear initramfs image names 
The '-initramfs' string is duplicated in the image names,
fix it.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37892
 2013-09-03 07:22:27 +00:00
Gabor Juhos
d120ec18b2 kernel: update 3.10 to 3.10.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37890
 2013-09-02 19:12:54 +00:00
Gabor Juhos
c8cd8c94d8 ar71xx: image: reorder Image/Build/* macros 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37889
 2013-09-02 19:05:58 +00:00
Gabor Juhos
1712fdd658 ar71xx: image: simplify more oneliner macros 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37888
 2013-09-02 19:05:57 +00:00
Gabor Juhos
02551d3883 ar71xx: image: simplify oneliner loader macros 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37887
 2013-09-02 19:05:56 +00:00
Gabor Juhos
0cdf133d20 ar71xx: image: simplify oneliner initramfs macros 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37886
 2013-09-02 19:05:55 +00:00
Gabor Juhos
b125a0f6b9 ar71xx: image: simplify oneliner buildkernel macros 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37885
 2013-09-02 19:05:54 +00:00
Gabor Juhos
4a11acf81b ar71xx: optimize kernel generation 
When the squashfs and jffs2 images are generated
in the same turn, the compressed kernel images
are generated twice with the same parameters.

Move compressed kernel generation into a separate
phase to avoid that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37881
 2013-09-02 18:03:39 +00:00
Gabor Juhos
0ceeb6a068 ar71xx: image: dynamically generate Image/Build/Template/* macros 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37879
 2013-09-02 16:10:44 +00:00
Gabor Juhos
122a61aa49 ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2 
It also fixes USB Power on MR3420v2.

This time we took the information from the source of GPL:
http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html
Confirmed and tested:
https://dev.openwrt.org/ticket/13201#comment:41
Thanks to oguretsagressive for testing.

Signed-off-by: Dmytro <dioptimizer@gmail.com>

SVN-Revision: 37878
 2013-09-02 16:09:12 +00:00
Gabor Juhos
1f007eeca1 ar71xx: remove fs_* variables from image/Makefile 
Those are not needed since we are generating the
initramfs images along with the others.

Remove the variables and use the template names
directly.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37876
 2013-09-02 09:24:59 +00:00
Gabor Juhos
e7a5947576 ar71xx: fix initramfs image generation for Cameo933x profiles 
Initramfs images are not generated for profiles which
are using the squashfs-only template. Add the missing
'Image/Build/Template/squashfs-only/initramfs' to fix
that.

Also, 'Image/Build/Cameo933x/initramfs' uses wrong
parameters for 'MkuImageLzma/initramfs' due to a
misplaced commma. Remove that to fix the generated
initramfs images.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37871
 2013-09-02 07:42:03 +00:00
Gabor Juhos
dd421c00a2 ar71xx: add some pending patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37849
 2013-08-27 18:06:49 +00:00
Gabor Juhos
d6b4b8f612 ar71xx: don't hardwire cpu_has_dsp{,2} to zero 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37845
 2013-08-27 10:48:25 +00:00
Gabor Juhos
9af6a5a88f ar71xx: don't register USB device on WNDAP360 
Apparently registering usb device on newest trunk causes
this AP not to boot...
Since there is no USB socket in that device anyway this
can be simply removed (and device boots then no problem).

[juhosg:
  - tweak subject line and description,
  - remove #include "dev-usb.h",
  - remove 'select ATH79_DEV_USB' from Kconfig]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37844
 2013-08-27 10:48:24 +00:00
Gabor Juhos
42914b0b0e ar71xx: build factory image for DIR-505 A1 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37834
 2013-08-24 10:11:53 +00:00
Gabor Juhos
f7eb3d94b9 ar71xx: allow to override kernel size in the CameoHornet profile 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37833
 2013-08-24 10:11:45 +00:00
Gabor Juhos
043edd8074 kernel: update 3.10 to 3.10.9 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37832
 2013-08-23 17:31:04 +00:00
Luka Perkov
5064c81457 ar71xx: add support for hornet-ub-x2 
The hornet-ub-x2 is hornet-ub variant with double more flash and ram.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37788
 2013-08-15 00:57:47 +00:00
John Crispin
eb7669fc5d ar71xx: fix TL-WR710N board detection 
Fix for recognize TL-WR710N

http://patchwork.openwrt.org/patch/3946/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 37782
 2013-08-14 18:15:58 +00:00
John Crispin
6d7d09a126 ar71xx: Fix factory image for DIR 505 A1 
Based on the original firmware, the file must have the tag
HORNET-PACKET-DIR505A1-3, not HORNET-RT-DIR505A1-3.

http://patchwork.openwrt.org/patch/3945/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 37781
 2013-08-14 18:15:49 +00:00
Felix Fietkau
bbd4d4c8b8 ar71xx: ethernet: reduce tx dma ring size further to improve cache footprint 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37765
 2013-08-13 10:35:10 +00:00
Felix Fietkau
58e049ea80 ar71xx: ethernet: reduce tx and rx DMA ring size to improve cache footprint 
256 entries is a bit excessive, even for gigabit speeds

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37762
 2013-08-12 17:26:03 +00:00
Felix Fietkau
f43b4ea962 ar71xx: ethernet: cache skb->len in the tx function to avoid accessing it again in completion 
Improves ethernet performance, especially during bridging

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37761
 2013-08-12 17:26:00 +00:00
Felix Fietkau
53c3b2a193 ar71xx: fix typo 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37759
 2013-08-12 12:41:53 +00:00
Felix Fietkau
f18fd5512e ar71xx: ethernet: skip calls to netdev_completed_queue and netif_wake_queue if no tx cleanup was done 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37758
 2013-08-12 11:44:35 +00:00
Felix Fietkau
81cfb9e5ed ar71xx: ethernet: do not update the unused dev->last_rx field 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37757
 2013-08-12 11:44:31 +00:00
Felix Fietkau
104ff48e25 ar71xx: add missing return statement in ethernet mtu change op 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37756
 2013-08-12 11:44:28 +00:00
Felix Fietkau
7b05fe59a4 ar71xx: allow mtu > 1500 based on the configured tx/rx mtu register value 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37748
 2013-08-10 15:31:38 +00:00
John Crispin
f835cb6cc4 ar71xx: remove duplicate dir505 entry from board detection code 
https://dev.openwrt.org/ticket/14006

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37723
 2013-08-06 14:12:02 +00:00
John Crispin
267810f73a ar71xx: add usb modules to dir 505 profile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37706
 2013-08-05 11:08:30 +00:00
John Crispin
553a469728 ar71xx: add support for dir 505 a1 
this patch is based on ...

-> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37703
 2013-08-05 10:41:48 +00:00
Gabor Juhos
99a12119ca ar71xx: fix tl-wa901nd buttons code 
This patch fixes the code of the buttons for TP-Link WA901ND.

Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37696
 2013-08-05 09:09:39 +00:00
Gabor Juhos
ccec78beaa ar71xx: ubnt unifi outdoor register gpio button 
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor.

Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37695
 2013-08-05 09:09:37 +00:00
Felix Fietkau
8f04792531 kernel: update to linux 3.10.4, refresh patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37617
 2013-07-29 22:42:22 +00:00
Felix Fietkau
73c4d73d6d build: unify target independent optimization options 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
 2013-07-29 09:38:29 +00:00
Gabor Juhos
65584ed54f ar71xx: add profile and build image for the WNR612 v2 board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37577
 2013-07-28 10:23:38 +00:00
Gabor Juhos
41d136f2c8 ar71xx: add user-space support for the WNR612 v2 board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37576
 2013-07-28 10:23:37 +00:00
Gabor Juhos
6d8163505e ar71xx: add kernel support for the Netgear WNR612 v2 board 
Netgear WNR612 v2:
 - cpu Atheros AR7240 (Python) @400MHz
 - flash 4MB
 - ram 32MB
 - ethernet 10/100: 1xwan + 2xlan (only two)
 - radio AR9285

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37575
 2013-07-28 10:23:36 +00:00
Gabor Juhos
ede1587ed8 ar71xx: add profile and build image for the TL-WR710N board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37574
 2013-07-28 10:23:34 +00:00
Gabor Juhos
5f5257e234 ar71xx: add user-space support for the TL-WR710N board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37573
 2013-07-28 10:23:33 +00:00
Gabor Juhos
c5029c2ebf ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board 
Small router sold in EU: AR9330@400MHz, 1x USB2.0,
2x ethernet, 8MB flash, 32MB ram, one led, one button.

See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37572
 2013-07-28 10:23:32 +00:00
Gabor Juhos
af1dd57a37 ar71xx: build image for the MERCURY MW4530R board 
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37571
 2013-07-28 10:23:31 +00:00
Gabor Juhos
8b6f392b72 ar71xx: add model detection for the MERCURY MW4530R board 
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37570
 2013-07-28 10:23:29 +00:00
Gabor Juhos
b49dc036e8 ar71xx: TEW632BRP has buttons 'active low', fix board config 
Looks like trunk@37090 has changed the logic that determines
if router's button was pressed. This resulted in TEW632BRP
always booting into failsafe mode because it detected pressed
button (which was not pressed).

Measure with voltmeter has shown that buttons on this router
are actually active-low. This patch reflects this fact in
board configuration and fixes 'load info failsafe mode' issue.

Note: it looks like Trendnet TEW632BRP and a close relative
to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may
exist on those routers as well. This patch doesn't affect
routers other than 632BRP and unfortunately I do not have
hardware to test this issue with other routers.

This patch fixes #13893 and is tested on actuall Trendnet
TEW632BRP.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37569
 2013-07-28 10:23:22 +00:00
Gabor Juhos
f093cda481 ar71xx: add profile and fixup image generation for the TL-MR10U board 
Create a separate board profile and update the profile
name in image/makefile. Also use the correct machtype
string in kernel command line.

Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37550
 2013-07-26 07:32:01 +00:00
Gabor Juhos
f4d5ecdb9f ar71xx: add user-space support for the TL-MR10U board 
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37548
 2013-07-26 07:31:59 +00:00
Gabor Juhos
ec7fe3fab7 ar71xx: add kernel support for the TL-MR10U board 
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

[juhosg: extend WR703N code to handle the TL-MR10U
instead of adding a separate mach-tl-mr10u file]]

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37547
 2013-07-26 07:31:57 +00:00
Gabor Juhos
e9688455f6 kernel: update 3.10 to 3.10.3 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37546
 2013-07-26 07:19:58 +00:00
Gabor Juhos
ea55883a51 ar71xx: fix switch port map for the Archer C7 
The correct port number for the WAN port is 1.
Update the VLAN port maps to reflect that.

https://forum.openwrt.org/viewtopic.php?pid=203755#p203755

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37507
 2013-07-22 16:02:13 +00:00
Gabor Juhos
ef944dcb85 kernel: update 3.10 to 3.10.2 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37502
 2013-07-22 15:31:13 +00:00
Gabor Juhos
205f7248ae Revert "ar71xx: override cpu_has_mmips feature" 
This reverts r37477. A generic patch is used to fix
this globally, so revert the ar71xx specific change.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37480
 2013-07-20 10:14:08 +00:00
Gabor Juhos
2d8fd8b58c ar71xx: override cpu_has_mmips feature 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37477
 2013-07-20 09:40:32 +00:00
Gabor Juhos
8a6575cf53 ar71xx: use mtd_get_part_size helper 
Drop the local get_mtd_part_size implementation and use
the equivalent function provided by lib/functions.sh.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37476
 2013-07-20 09:26:57 +00:00
Gabor Juhos
4a9d4271d0 ar71xx: build image for the TP-LINK TL-WR941N v6 board 
TL-WR941N v6 use almost same IC as WDR3500.

[juhosg: change subject, and change fw layout from 4M to 4Mlzma]

Patchwork: http://patchwork.openwrt.org/patch/3719/
Signed-off-by: ShuYu Wang <andelf@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37471
 2013-07-20 08:54:45 +00:00
Jonas Gorski
b1b4e7db13 kernel: move CONFIG_NET_IP_TUNNEL to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37465
 2013-07-19 22:58:01 +00:00
Felix Fietkau
8b92613b6c ar71xx: fix uimage split for ew-dorin 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37350
 2013-07-15 16:59:58 +00:00
Felix Fietkau
c77eca3108 ar71xx: refresh patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37349
 2013-07-15 15:12:41 +00:00
Luka Perkov
9e3eee974b ar71xx: remove patches for 3.8 (leftover after r37315) 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37324
 2013-07-14 22:57:47 +00:00
John Crispin
3d15bc6fb2 ar71xx: fix maximum watchdog timeout 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37315
 2013-07-14 18:01:09 +00:00
Felix Fietkau
eb0a44917e ar71xx: update to 3.10.1 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37310
 2013-07-14 17:29:56 +00:00
Felix Fietkau
936683b2de ar71xx: use uimage split for WHR-HP-G300N 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37303
 2013-07-14 14:06:01 +00:00
Felix Fietkau
342946d858 ar71xx: use uimage split for dlrtdev 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37302
 2013-07-14 14:05:57 +00:00
Felix Fietkau
594797cdd5 ar71xx: use uimage split for Allnet devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37301
 2013-07-14 14:05:53 +00:00
Felix Fietkau
e5b7a20bea ar71xx: use uimage split for Cameo devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37300
 2013-07-14 14:05:50 +00:00
Felix Fietkau
4fc17e4d08 ar71xx: use uimage split for DIR-825B1 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37299
 2013-07-14 14:05:46 +00:00
Felix Fietkau
c263993197 ar71xx: use uimage split for Embedded Wireless Dorin 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37298
 2013-07-14 14:05:42 +00:00
Felix Fietkau
083b0a06a3 ar71xx: use uimage split for Ubiquiti XM devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37297
 2013-07-14 14:05:39 +00:00
Felix Fietkau
6702955857 ar71xx: increase kernel size for wndr3700 based devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37296
 2013-07-14 14:05:35 +00:00
Felix Fietkau
25d910a78f ar71xx: use uimage split for WZR-HP-G300NH2 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37295
 2013-07-14 14:05:31 +00:00
Felix Fietkau
6bff456212 ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37294
 2013-07-14 14:05:27 +00:00
Felix Fietkau
fbde376c53 ar71xx: use uimage split for WZR-HP-G300NH 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37293
 2013-07-14 14:05:23 +00:00
Felix Fietkau
a7c5f6708b ar71xx: use uimage split for WZR-HP-G450H 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37292
 2013-07-14 14:05:19 +00:00
Felix Fietkau
ab5e21a9a5 ar71xx: enable uimage split and use it for carambola2 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37291
 2013-07-14 14:05:16 +00:00
Felix Fietkau
8d5d96e833 ar71xx: remove linux 3.8 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37290
 2013-07-14 14:05:12 +00:00
Felix Fietkau
d1238718c2 ar71xx: move the watchdog driver to the kernel 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37289
 2013-07-14 14:05:08 +00:00
Felix Fietkau
8cf868e1a6 ar71xx: set linux 3.10 as default 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37288
 2013-07-14 14:05:04 +00:00
Felix Fietkau
9b9c6facfc ar71xx: fix ar933x watchdog clock (#13866) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37273
 2013-07-13 22:29:53 +00:00
John Crispin
39531131a9 ar71xx: add carambola2 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37260
 2013-07-11 21:16:53 +00:00
John Crispin
2d854d022c ar71xx: set priority of ath79_wdt to 1 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37251
 2013-07-11 17:01:08 +00:00
Florian Fainelli
8149689393 ar71xx: fix TPLINK/TPLINKOLD initramfs images typos 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37237
 2013-07-10 21:28:34 +00:00
Florian Fainelli
9e40952c92 ar71xx: fix Netgear initramfs images 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37230
 2013-07-10 17:18:03 +00:00
Florian Fainelli
399283f875 ar71xx: fix some more issues with initramfs images 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37229
 2013-07-10 15:22:47 +00:00
Felix Fietkau
eb2e09c5e9 ar71xx: make implicit alignment in struct pptp_addr explicit to fix ABI breakage caused by the unaligned access hacks patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37223
 2013-07-10 11:33:43 +00:00
Felix Fietkau
64dde7d981 ar71xx: add linux 3.10 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37214
 2013-07-09 12:52:18 +00:00
Gabor Juhos
e61a77a05c ar71xx: disable JTAG on TL-WR841N-v8/MR3420v2 
It also fixes USB Power on MR3420v2.

Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37194
 2013-07-08 08:40:21 +00:00
Gabor Juhos
446a962481 ar71xx: fix partition layout on Netgear WNDAP360 
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37193
 2013-07-08 08:40:20 +00:00
Gabor Juhos
ca02639d17 ar71xx: fix for wrong eth0 mac assignment on Netgear WNDAP360 
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37192
 2013-07-08 08:40:18 +00:00
Luka Perkov
ecfb0c6de6 ar71xx: merge patches [611-*,621-*] into 610-* 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37176
 2013-07-04 23:31:39 +00:00
Luka Perkov
1f546910cb ar71xx: Buffalo WZR-HP-AG300H (600DHP) enable PCI 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37167
 2013-07-04 13:45:29 +00:00
Luka Perkov
7b6e3df6ab ar71xx: $(KDIR_TMP) must be present before starting initramfs build 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37155
 2013-07-04 12:48:52 +00:00
Luka Perkov
c9926f77b4 ar71xx: Buffalo WZR-HP-AG300H (600DHP) change button type 
switch buttons should be declared as switch so the failsafe shell is not
triggered by accident in procd

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37131
 2013-07-02 10:45:32 +00:00
Florian Fainelli
c627ae768e ar71xx: only invoke Initramfs building when enabled 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37129
 2013-07-02 10:43:31 +00:00
Florian Fainelli
460233fa2a ar71xx: fix initramfs images generation after r37049 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37120
 2013-07-01 15:37:25 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images 
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
 2013-06-27 19:58:31 +00:00
John Crispin
67f5f188b1 base-files: input/button drivers get loaded before preinit by procd 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37000
 2013-06-21 16:53:47 +00:00
John Crispin
e6ef318802 base-files: diag does not need to insmod any drivers, procd already did it for us 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36999
 2013-06-21 16:53:43 +00:00
John Crispin
2be717560a ar71xx: drop procd_init console hack 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36992
 2013-06-21 16:53:11 +00:00
Felix Fietkau
ab529a529b ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36879
 2013-06-07 13:42:50 +00:00
Gabor Juhos
5bb2e8030d ar71xx: add support for WIFI button on tp-link tl-mr3220v2 
The TP-LINK TL-MR3220 v2 has a button on the left side
labeled "WIFI". This is GPIO 24. This patch adds the
support for this button.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36848
 2013-06-04 13:25:54 +00:00
Gabor Juhos
da66ea52ec ar71xx: register USB port for RB2011U* devices 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36801
 2013-05-30 17:38:31 +00:00
Gabor Juhos
23bcceb058 ar71xx: create a separated network interface for the RB2011UAS SFP port 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36800
 2013-05-30 17:38:30 +00:00
Gabor Juhos
151dca0935 ar71xx: make the SFP port usable on RB2011*S boards 
The port 6 of the switch is connected to the SFP
cage on the RB2011*S boards. Add a helper function
to correctly initialize the switch configuration
data on those boards to make the SFP port usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36799
 2013-05-30 17:38:28 +00:00
Gabor Juhos
3467b17e69 ar71xx: rb2011: add switch led control values 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36796
 2013-05-30 17:38:21 +00:00
Gabor Juhos
4cf6e53ccc ar71xx: rb2011: update RGMII RX/TX delay values 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36795
 2013-05-30 17:38:20 +00:00
Gabor Juhos
6da63a8793 ar71xx: rb2011: move NAND nCE init to rb2011_nand_init 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36794
 2013-05-30 17:38:17 +00:00
Gabor Juhos
50c59c4797 ar71xx: add user-space support for RB2011UAS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36793
 2013-05-30 17:38:15 +00:00
Gabor Juhos
d6554bf66a ar71xx: add kernel support for the RB2011UAS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36792
 2013-05-30 17:38:13 +00:00
Gabor Juhos
d19dae6e2d ar71xx: add profile and build image for the Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36790
 2013-05-30 16:23:10 +00:00
Gabor Juhos
35b5b38316 ar71xx: add user-space support for TP-LINK Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36789
 2013-05-30 16:23:09 +00:00
Gabor Juhos
91d7c3efc1 ar71xx: add kernel support for the TP-LINK Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36788
 2013-05-30 16:23:07 +00:00
Gabor Juhos
f02765086d ar71xx: add USB workarounds for AR934x/QCA955x SoCs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36787
 2013-05-30 16:23:06 +00:00
Gabor Juhos
6ff976a87a ar71xx: add profile and build image for the DIR-601-B1 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36786
 2013-05-30 16:19:30 +00:00
Gabor Juhos
424c4c0b0a ar71xx: allow to build CameoHornet images for multiple regions 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36785
 2013-05-30 16:19:29 +00:00
Gabor Juhos
184dd34b6d ar71xx: allow to override fw version in CameoHornet profile 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36784
 2013-05-30 16:19:28 +00:00
Gabor Juhos
c4d0a49348 ar71xx: typo in detect TL-MR10U/TL-MR11U 
At offset 0x40, signature for TL-MR10U/TL-MR11U begin
from 0x00, not 0x10/0x11.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36727
 2013-05-26 16:38:00 +00:00
Gabor Juhos
cc7bedf8a3 ar71xx: fix TL-MR10U usb power 
MR10U is closer to MR3040 than WR703N. This changes also
enable USB power on GPIO18.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36726
 2013-05-26 16:37:59 +00:00
Gabor Juhos
46225b99d9 kernel: update linux 3.8 to 3.8.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
 2013-05-26 16:02:31 +00:00
Gabor Juhos
93ce462b7e ar71xx: set eth0 mac address to match bottom label of the OM2P LC 
Signed-off-by: marek@open-mesh.com
CC: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36723
 2013-05-26 16:02:29 +00:00
Gabor Juhos
0842478e44 ar71xx: add TP-LINK TL-MR10U 
Small router with 4MB flash, 32MB RAM
http://www.tp-link.com.cn/product_300.html

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36722
 2013-05-26 16:02:26 +00:00
Felix Fietkau
fe7e52e4a4 ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36679
 2013-05-21 09:45:46 +00:00
Felix Fietkau
56478636aa ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36646
 2013-05-17 07:31:00 +00:00
Felix Fietkau
144cfb65a4 ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36631
 2013-05-13 19:13:33 +00:00
Jonas Gorski
526aedb705 kernel: move CONFIG_MIPS_SEAD3 to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36617
 2013-05-12 21:41:55 +00:00
Felix Fietkau
0be8dd36dc ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36600
 2013-05-09 23:32:46 +00:00
Gabor Juhos
cb3d71ca8e ar71xx: use combined kernel image in the CameoHornet template 
This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36584
 2013-05-08 17:11:10 +00:00