Commit graph

21236 commits

Author SHA1 Message Date
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board
SVN-Revision: 32944
2012-08-02 09:54:28 +00:00
Gabor Juhos
e2782eae8e generic: rtl836x: add hw_reset field to struct rtl8366_smi
It will be used to start/stop the switch if that is
supported by the given board.

SVN-Revision: 32943
2012-08-02 09:54:21 +00:00
Gabor Juhos
614ca3cc9e generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls
SVN-Revision: 32942
2012-08-02 09:54:13 +00:00
Florian Fainelli
9f011e7225 add missing netmask to the network config
SVN-Revision: 32941
2012-08-01 22:09:13 +00:00
Florian Fainelli
5133a44785 assume the link is up and full-duplex by default
SVN-Revision: 32940
2012-08-01 21:56:54 +00:00
Florian Fainelli
56aac45139 add a default and suitable network config file
SVN-Revision: 32939
2012-08-01 21:56:49 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
2012-08-01 12:24:57 +00:00
Gabor Juhos
8eabe64e6b ar71xx: ew-dorin: added USB support
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32933
2012-08-01 12:24:56 +00:00
Gabor Juhos
1af4fd7660 ar71xx: Buffalo WLAE-AG300N wireless led patch
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32932
2012-08-01 12:24:54 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
2012-08-01 12:24:52 +00:00
Florian Fainelli
df48d71d72 resync defconfig enable XZ compression
SVN-Revision: 32930
2012-08-01 12:01:27 +00:00
Florian Fainelli
83907c10ed uclibc++: update to 0.2.4
SVN-Revision: 32929
2012-08-01 12:01:24 +00:00
Florian Fainelli
5df254664f uclibc++: stage g++-uc wrappers in $(TOOLCHAIN_DIR)
Since we are overriding TARGET_CXX with the g++-uc wrapper when
we use cmake it expects to find g++-uc in the TOOLCHAIN_DIR.

SVN-Revision: 32928
2012-08-01 12:01:18 +00:00
Florian Fainelli
3cd753408d properly generate squashfs, jffs2 and initramfs images and kernels
SVN-Revision: 32927
2012-07-31 23:09:50 +00:00
Florian Fainelli
c0561a42e7 disable crashlog on ARM platforms for the moment
It is currently badly broken on ARM, until fixed, disable it

SVN-Revision: 32926
2012-07-31 23:09:46 +00:00
John Crispin
f5f36911f0 add lantiq svip support
SVN-Revision: 32925
2012-07-31 18:49:54 +00:00
Jonas Gorski
07c4524d33 bcm63xx: Add nb6 support (BCM6362 SoC base boards)
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]

SVN-Revision: 32924
2012-07-31 14:27:47 +00:00
Jonas Gorski
820c224029 bcm63xx: add basic bcm6362 support
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32923
2012-07-31 14:27:42 +00:00
Jonas Gorski
dcd339ac9d bcm63xx: enable usb for bcm6328
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32922
2012-07-31 14:27:34 +00:00
Jonas Gorski
94d257a851 bcm63xx: update enetswitch driver
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32921
2012-07-31 14:27:31 +00:00
Jonas Gorski
fa75bd977a bcm63xx: reorder patches
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32920
2012-07-31 14:27:25 +00:00
Florian Fainelli
d1ab4df0d6 move i2c module to target modules.mk
SVN-Revision: 32910
2012-07-29 13:20:51 +00:00
Florian Fainelli
e29d26e56f partially revert r32855
Too many modules were removed, while only the octeon module was meant to be
removed, fix that.

SVN-Revision: 32909
2012-07-29 13:20:47 +00:00
Florian Fainelli
a5738c960a resync config
SVN-Revision: 32908
2012-07-29 13:20:39 +00:00
Florian Fainelli
17244dea00 use the same description as other omap platforms (without the dash)
SVN-Revision: 32907
2012-07-29 13:20:35 +00:00
John Crispin
ee0946a5f4 refresh pwm patch
SVN-Revision: 32905
2012-07-29 11:53:06 +00:00
John Crispin
1f58c9b6c1 dont build on arm as kernel headers are missing/have a different layout
SVN-Revision: 32904
2012-07-29 09:07:47 +00:00
John Crispin
370894e594 fix up scons vs ccache
SVN-Revision: 32902
2012-07-28 21:06:59 +00:00
John Crispin
101766fb00 clean up pwm patches and drivers
SVN-Revision: 32901
2012-07-28 20:47:08 +00:00
Hauke Mehrtens
f0fe59648a add config option CONFIG_I2C_MV64XXX to fix kirkwood build
SVN-Revision: 32898
2012-07-28 11:36:52 +00:00
Florian Fainelli
67891c26ec resync config
SVN-Revision: 32895
2012-07-27 15:35:15 +00:00
Florian Fainelli
a4d699ccf0 fix DVA-G3810BN image generation
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32894
2012-07-27 15:35:12 +00:00
Florian Fainelli
c6813d33f3 add D-link DVA-G3810BN-TL-1 support
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32893
2012-07-27 15:35:09 +00:00
Florian Fainelli
18206793b2 Add CT6376-1 board support
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892
2012-07-27 15:35:05 +00:00
Florian Fainelli
6afd1725f1 base-files: fix detection of standalone ldd
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 32891
2012-07-27 15:35:00 +00:00
Florian Fainelli
4acdbb1d87 Add brcmsmac profile
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32890
2012-07-27 15:34:57 +00:00
John Crispin
9beec09f5f mae brcmutil depend on PCI and USB. This broke ar7 fullbuilds
SVN-Revision: 32886
2012-07-27 08:30:05 +00:00
John Crispin
0ba7b18cfd Add leds back after migration to sysfs
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.

Signed-off-by: Karl Palsson <karlp@remake.is>

SVN-Revision: 32885
2012-07-26 17:06:55 +00:00
Florian Fainelli
46611b2cbf add more missing config symbols
SVN-Revision: 32884
2012-07-26 17:03:08 +00:00
Florian Fainelli
ac30beaaa7 add more USB-related config symbols
SVN-Revision: 32883
2012-07-26 17:03:05 +00:00
Florian Fainelli
a077e785cf make sure target modules depend on the target
SVN-Revision: 32882
2012-07-26 17:03:02 +00:00
Hauke Mehrtens
0c75abf527 bcma: update to version from wireless-testing tag master-2012-07-16
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880
2012-07-26 15:42:18 +00:00
Florian Fainelli
4a3cbbf99d make kmod-mvsas depend on x86 since it fails building on other targets (eg: brcm63xx)
SVN-Revision: 32878
2012-07-26 09:29:22 +00:00
John Crispin
87a72d68f1 fix typo in modules.mk
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32870
2012-07-25 19:52:30 +00:00
Florian Fainelli
d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly
SVN-Revision: 32869
2012-07-25 19:36:19 +00:00
Felix Fietkau
5832e754fb mtd: fix trx_fixup
With the BRCM47xx image I have built (Linksys E3000), there are additional
writes following the completion of "mtd_replace_jffs2" which invalidate the
'trx_fixup' performed by 'mtd_replace_jffs2'.  Moving the 'trx_fixup' to somewhere
after all writes have completed fixes the problem.  I also noticed that 'erasesize'
used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by
'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this.

Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at
offset 0; which may be the cause of the problem described in Ticket #8960.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 32866
2012-07-25 17:28:32 +00:00
Florian Fainelli
adc2b21be8 move isp116x driver to target specific modules.mk
SVN-Revision: 32865
2012-07-25 15:50:45 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk
SVN-Revision: 32864
2012-07-25 15:50:42 +00:00
Florian Fainelli
c7a69869f7 move ubsec-ssb driver to target specific modules.mk
SVN-Revision: 32863
2012-07-25 15:50:38 +00:00
Florian Fainelli
d1b2087a35 move ssb-gige to target specific modules.mk
SVN-Revision: 32862
2012-07-25 15:50:36 +00:00