Commit graph

18036 commits

Author SHA1 Message Date
Mathias Kresin
77fee9bcce lantiq: ase: cleanup kernel config
The subtarget kernel config options CONFIG_CC_OPTIMIZE_FOR_SIZE and
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK are already set by the target or
global kernel config.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-04 20:08:15 +02:00
Mathias Kresin
d7a76be980 lantiq: xway: cleanup kernel config
CONFIG_SPI_LANTIQ was replaced by CONFIG_SPI_LANTIQ_SSC with the switch
to the upstreamed driver.

All other removed subtarget kernel config options are already set by
the target specific or global kernel config.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-04 20:08:15 +02:00
Mathias Kresin
d3f3b817ac lantiq: xrx200: cleanup kernel config
CONFIG_MTSCHED & CONFIG_PERFCTRS were never defined in the kernel.

CONFIG_LANTIQ_PHY was replaced by CONFIG_INTEL_XWAY_PHY with the switch
to the upstreamed driver.

Add autoselected dependecies to the kernel config.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-04 20:08:15 +02:00
Mathias Kresin
054f01ac16 lantiq: xrx200: fix sorting of kernel config
Use the kconfig script to sort the kernel config. It makes further
changes more obvious.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-04 20:08:15 +02:00
Mathias Kresin
1c45d11bb3 treewide: drop obsolete kernel config options
CONFIG_GPIO_DEVRES was removed with kernel commit f9c22ec6c1c5 ("gpio:
Remove GPIO_DEVRES option") during kernel 4.9 development.

CONFIG_HAVE_BPF_JIT was removed with kernel commit 6077776b5908 ("bpf:
split HAVE_BPF_JIT into cBPF and eBPF variant") during kernel 4.7
development.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-04 20:08:15 +02:00
Hauke Mehrtens
5508510e74 sunxi: add Orange Pi R1 support
The following features are working and tested:
* both Ethernet ports
* MMC
* LED

The following features are not working:
* Wifi (There is a crappy driver we could port)
* SPI flash (I haven't looked into this)

I haven't tried out the rest.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 17:10:33 +02:00
Hauke Mehrtens
dbbb4df163 kernel: owl-loader: fix compile warning
check if the config option CONFIG_LANTIQ is defined.
This fixes the following warning:
  CC [M]  drivers/misc/owl-loader.o
drivers/misc/owl-loader.c: In function 'ath9k_pci_fixup':
drivers/misc/owl-loader.c:92:5: warning: "CONFIG_LANTIQ" is not defined [-Wundef]
 #if CONFIG_LANTIQ
     ^

Fixes: e9401a2335 ("kernel: owl-loader for delayed Atheros ath9k fixup")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 16:40:37 +02:00
Hauke Mehrtens
25abd71efb sunxi: H3: add device tree changes for H3 Ethernet
This adds the device tree changes needed to make the GMAC stmmac driver
working for the Allwinner H3 SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 13:01:03 +02:00
Hauke Mehrtens
cf039cf7ff sunxi: A64: add device tree changes for A64 Ethernet
This adds the device tree changes needed to make the GMAC stmmac driver
working for the Allwinner A64 SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 13:01:03 +02:00
Hauke Mehrtens
ed43a4d4ac sunxi: backport the stmmac driver from kernel 4.13
This adds support for the GMAC which is use in the A64 and other
Allwinner chips by backporting the changes from the kernel versions
4.13.

Some commits are not backported which are adding support for newly
introduced APIs which are not available in kernel 4.9.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 13:00:16 +02:00
Kevin Darbyshire-Bryant
657f2a1ff8 kernel: update 4.4 to 4.4.89
Refresh patches.
Compile & run tested on ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-09-29 07:42:43 +03:00
Felix Fietkau
f4a6daa5da ar71xx: unify CONFIG_CMDLINE
Booting from jffs2 directly is no longer supported, use
rootfstype=squashfs consistently for all subtargets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-09-28 22:45:39 +02:00
Rosen Penev
dcdc2880b6 ramips: reduce napi_weight in the ethernet driver.
Currently dmsg a weight of 128 which is above the kernel limit of 64. Silence the warning.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-09-28 09:22:02 +02:00
Roman Yeryomin
bcb89fcca8 ramips: mt7621: add MT29F2G08ABAE NAND flash support
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2017-09-28 09:21:57 +02:00
Kevin Darbyshire-Bryant
f2107fc328 ramips: improve Xiaomi Mi Router 3G support
This commit improves support for the Xiaomi Mi Router 3G originally
added in commit 6e283cdc0d

Improvements:

- Remove software watchdog as hardware watchdog now working as per
  commit 3fbf3ab44f for all mt7621
  devices.

- Reset button polarity corrected - length of press determines reboot
  (short press) vs. reset to defaults (long press) behaviour.

- Enable GPIO amber switch port LEDs on board rear - lit indicates 1Gbit
  link and blink on activity.  Green LEDs driven directly by switch
  indicating any link speed and tx activity.

- USB port power on/off GPIO exposed as 'usbpower'

- Add access to uboot environment settings for checking/setting uboot
  boot order preference from user space.

Changes:

- Front LED indicator is physically made of independent Yellow/Amber,
  Red & Blue LEDs combined via a plastic 'lightpipe' to a front panel
  indicator, hence the colour behaviour is similar to an RGB LED. RGB
  LEDs are not supported at this time because they produce colour results
  that do not then match colour labels, e.g. enabling 'mir3g:red' and
  'mir3g:blue' would result in a purple indicator and we have no such
  label for purple.
  The yellow, red & blue LEDs have been split out as individual yellow,
  red & blue status LEDs, with yellow being the default status LED as
  before and with red's WAN and blue's USB default associations removed.

- Swapped order of vlan interfaces (eth0.1 & eth0.2) to match stock vlan
  layout. eth0.1 is LAN, eth0.2 is WAN

- Add 'lwlll' vlan layout to mt7530 switch driver to prevent packet
  leakage between kernel switch init and uci swconfig

uboot behaviour & system 'recovery'

uboot expects to find bootable kernels at nand addresses 0x200000 &
0x600000 known by uboot as "system 1" and "system 2" respectively.
uboot chooses which system to hand control to based on 3 environment
variables: flag_last_success, flag_try_sys1_failed & flag_try_sys2_failed

last_success represents a preference for a particular system and is set
to 0 for system 1, set to 1 for system 2.  last_success is considered *if*
and only if both try_sys'n'_failed flags are 0 (ie. unset) If *either*
failed flags are set then uboot will attempt to hand control to the
non failed system. If both failed flags are set then uboot will check
the uImage CRC of system 1 and hand control to it if ok.  If the uImage
CRC of system is not ok, uboot will hand control to system 2
irrespective of system 2's uImage CRC.

NOTE: uboot only ever sets failed flags, it *never* clears them. uboot
sets a system's failed flag if that system's was selected for boot but
the uImage CRC is incorrect.

Fortunately with serial console access, uboot provides the ability to
boot an initramfs image transferred via tftp, similarly an image may
be flashed to nand however it will flash to *both* kernels so a backup
of stock kernel image is suggested. Note that the suggested install
procedure below set's system 1's failed flag (stock) thus uboot ignores
the last_success preference and boots LEDE located in system 2.

Considerable thought has gone into whether LEDE should replace both
kernels, only one (and which one) etc. LEDE kernels do not include a
minimal rootfs and thus unlike the stock kernel cannot include a
method of controlling uboot environment variables in the event of
rootfs mount failure. Similarly uboot fails to provide an external
mechanism for indicating boot system failure.

Installation - from stock.

Installation through telnet/ssh:
- copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and
  lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it
  from LEDE download site to /tmp
- switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if
  wgetted from LEDE download site
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0
- run: nvram set flag_try_sys1_failed=1
- run: nvram commit
- run: reboot

Recovery - to stock.

Assuming you used the above installation instructions you will have a
stock kernel image in system 1. If it can be booted then it may be used
to perform a stock firmware recovery, thus erasing LEDE completely. From
a 'working' LEDE state (even failsafe)

Failsafe only:
- run: mount_root
- run: sh /etc/uci-defaults/30_uboot-envtools
Then do the steps for 'All'

All:
- run: fw_setenv flag_try_sys2_failed 1
- run: reboot

The board will reboot into system 1 (stock basic kernel) and wait with
system red light slowly blinking for a FAT formatted usb stick with a
recovery image to be inserted.  Press and hold the reset button for
around 1 second. Status LED will turn yellow during recovery and blue
when recovery complete.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-09-28 09:20:36 +02:00
Zoltan Gyarmati
6a5b62f503 ramips: RT5350F-OLINUXINO: enable ttyS1
The RT5350F's second UART pins are available on the base module and on
the EVB as well, so enable it in the device tree.
 In order to keep the origian serial port numbering (ttyS0 is the serial
console), aliases added for the UART devices.

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-09-28 09:20:36 +02:00
Zoltan Gyarmati
9d8d3d4501 ramips: RT5350F-OLINUXINO: enable i2c
The RT5350F i2c pins is available on the base module and on
the EVB as well, so enable it in the dts.

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-09-28 09:20:36 +02:00
Zoltan Gyarmati
c1d19b107b ramips: RT5350F-OLINUXINO: invert WiFi LED polarity
The polarity of WLAN_ACT LED on the base module needs to inverted
in order to be 'on' when the WiFi interface is active

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-09-28 09:20:36 +02:00
Zoltan Gyarmati
862b820f15 ramips: introduce RT5350F-OLINUXINO.dtsi
The RT5350F-OLINUXINO(-EVB).dts files' content are nearly the same, so to avoid
code duplication this patch creates RT5350F-OLINUXINO.dtsi file which
covers the base board's features. The corresponding RT5350F-OLINUXINO.dts
just includes the new .dtsi and the RT5350F-OLINUXINO-EVB.dts adds the EVB
specific GPIO config.

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-09-28 09:20:36 +02:00
Kevin Darbyshire-Bryant
fd6bf05548 ramips: add 'lwlll' portmap to mt7530 switch
The Xiaomi Mi Router 3G uses this deranged vlan portmap. Add support so
that packets are not leaked across all switch ports when reset.

Fix a whitespace nit while we're here.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
[fix wrong pvids order]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-09-28 07:23:18 +02:00
Kevin Darbyshire-Bryant
972c126eb6 ramips: mt7621: fix failsafe mode networking
Disable VLANs on mt7621 boards with mt7530 switches on failsafe entry.

Allows failsafe networking to work correctly.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
[fixed default case syntax error]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-09-28 07:23:18 +02:00
Stijn Tintel
fde7688055 kernel: update 4.9 to 4.9.52
Refresh patches.
Compile-tested on x86/64.
Runtime-tested on x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:27:50 +03:00
Hauke Mehrtens
253a299604 Revert "brcm47xx: Fix sysupgrade with E1200v1"
This reverts commit 31e9445b7e.

"Linksys E1200 V1" is not a valid board name, as the brcm47xx arch code
can not detect this device. Stefan Lippers-Hollmann also found a typo in
this patch "cybetran" instead of "cybertan".

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-25 23:09:33 +02:00
Rosen Penev
31e9445b7e brcm47xx: Fix sysupgrade with E1200v1
Entry was missing for some reason.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-09-24 16:28:28 +02:00
Lucian Cristian
a7465f375a sunxi: add Olimex A20-OLinuXino-LIME2-eMMC
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[replaced u-boot patch with original version from u-boot git]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-24 16:28:28 +02:00
Philip Prindeville
f138833d0c kernel: don't scrimp on memory on big iron
x86_64 platforms typically don't lack memory, so don't needlessly
economize memory if fq_codel on capable platforms.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
[Add a comment to the patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-24 16:28:28 +02:00
Kevin Darbyshire-Bryant
3fbf3ab44f ramips: fix missing mediatek wdt
mediatek MT7621 soc watchdog DTS id was renamed from "mtk,mt7621-wdt" to
"mediatek,mt7621-wdt" when driver upstreamed to kernel 4.5

Update mt7621.dtsi & mt7628an.dtsi definitions to match upstreamed
kernel.

Restores hardward watchdog functionality on mt7621 devices under linux
4.9

Tested on: MIR3G

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-09-22 10:28:59 +02:00
Stijn Tintel
6e48eb22b8 kernel: update 4.9 to 4.9.51
Refresh patches.
Compile-tested on octeon and x86/64.
Runtime-tested on octeon and x86/64.

Fixes the following CVEs:
- CVE-2017-14106
- CVE-2017-14497

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-20 23:50:55 +03:00
Sandeep Sheriker Mallikarjun
09bf441090 at91: Add UBI parameters for sama5d4.
Add UBIFS_OPTS & UBINIZE_OPTS parameters for sama5d4 Xplained board.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:09 +02:00
Sandeep Sheriker Mallikarjun
67303259ee at91: Add SAMA5D4 device
Add support for SAMA5D4 with target device as at91-sama5d4_xplained
in SAMA5 subtarget and build images for SAMA5D4 Xplained board.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:01:02 +02:00
Sandeep Sheriker Mallikarjun
fdaaa923dd at91: Add SAMA5D2 device
Add support for SAMA5D2 with target device as at91-sama5d2_xplained
in SAMA5 subtarget and build images for SAMA5D2 Xplained board.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:00:44 +02:00
Sandeep Sheriker Mallikarjun
d7a679a036 at91: Install zImage.
Installing zImage to bin folder of device target.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:00:36 +02:00
Sandeep Sheriker Mallikarjun
f8a5ac1a88 at91: Renaming subtarget sama5d3 to sama5
Renaming at91 subtarget sama5d3 to sama5 and using at91-sama5d3_xplained
as a target device in sama5 subtarget.This will enable to add other
sama5d2 & sama5d4 target devices in sama5 subtraget.This will avoid
code duplication when sama5d2 & sama5d4 added as different subtarget.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-20 09:00:14 +02:00
Lucian Cristian
f295db6e46 sunxi: add Olimex A20-OlinuXino-LIME2
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-09-18 21:29:16 +02:00
Hauke Mehrtens
24c2f5125e sunxi: Add A64 support with cortex53 subtarget
This adds initial support for the A64 Allwinner SoC to LEDE.
It will be build in the new cortexa53 subtarget.

Currently it only supports the pine64 and the image is able to boot on
this SoC.

Camera, Ethernet, HDMI and other parts are currently not working.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 20:34:55 +02:00
Hauke Mehrtens
3b88f74bbe sunxi: Backport patches from kernel 4.11 for A64
This backports some more patches from kernel 4.11 adding more devices
to the device tree of the A64 SoC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 20:34:55 +02:00
Hauke Mehrtens
34a422794d sunxi: Backport patches needed for A64
This backports multiple patches from kernel 4.10 which are adding
missing support for the A64 and the pine64 board. These are the device
tree files, the pinctlk and the clock driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 20:34:55 +02:00
Hauke Mehrtens
41e7d2e2e8 sunxi: split into cortex A8 and A7 subtarget
Now we can activate some compiler optimizations for the cortex A7.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
4b81bb13f4 sunxi: fix build of rtc package when module not available
If the Kconfig option CONFIG_RTC_DRV_SUNXI is not selected this package
should be be build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens
ea9fab904b sunxi: add support for kernel 4.9
Most of the patches were backpoprts from the mainline kernel and are
integrated upstream now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:35:48 +02:00
Hauke Mehrtens
f7afcf1975 kernel: add some config options
These are needed for the sunxi target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:35:48 +02:00
Stijn Tintel
a23e00239d rb532: drop 4.4 support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-18 15:22:16 +03:00
Roman Yeryomin
c8ab03375a rb532: add myself as maintainer
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2017-09-18 15:22:16 +03:00
Roman Yeryomin
8291b0bd35 rb532: switch to 4.9
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2017-09-18 15:22:16 +03:00
Roman Yeryomin
740a5753e5 rb532: add support for 4.9
Includes latest korina fixes.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
[rewrite commit message (subject <= 50 characters)]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-18 15:20:48 +03:00
Roman Yeryomin
c4354797f7 rb532: set lan interface type to brigde
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2017-09-18 15:20:41 +03:00
Roman Yeryomin
87d3b3b5ff rb532: increase kernel size limit
This is required to support kernel 4.9.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
[rewrite commit message (subject <= 50 characters)]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-18 15:17:45 +03:00
Stijn Tintel
e37c7636ee kernel: update 4.9 to 4.9.50
Refresh patches.
Compile-tested on ipq8065/nbg6817 and x86/64.
Runtime-tested on ipq8065/nbg6817 and x86/64.

Fixes CVE-2017-1000251.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
[adapt qcom_nandc.c patches to match upstream changes, test ipq8065/nbg6817]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2017-09-18 04:35:57 +03:00
Florian Fainelli
bb83c9dcca kernel: update to 3.18.71
Delete a bunch of fixes that are already included.
Refresh patches.
Compile-tested on malta/mipsel
Runtime-tested on malta/mipsel

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 02:08:18 +03:00
Florian Fainelli
9fc5df52ff generic: drop 704-phy-no-genphy-soft-reset.patch
4.4.80+ contains 71a165f6397df07a06ce643de5c2dbae29bd3cfb, 4.9.41+ contains
6c78197e4a69c19e61dfe904fdc661b2aee8ec20 which are all backports of upstream
commit 0878fff1f42c18e448ab5b8b4f6a3eb32365b5b6 ("net: phy: Do not perform
software reset for Generic PHY").

Our local patch is no longer needed, all this patch was doing was utilizing
gen10g_soft_reset which does nothing either, so just keep the code unchanged.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-16 16:38:24 -07:00