Commit graph

33706 commits

Author SHA1 Message Date
Felix Fietkau
9b4b2b4e17 lantiq: switch to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48322
2016-01-18 15:54:18 +00:00
Felix Fietkau
f6e38ec125 br2684ctl: resolve a boot time race condition with nas0 bringup by using explicit notification when init is done
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48321
2016-01-18 15:35:30 +00:00
Felix Fietkau
262f054c6e br2684ctl: add support for notifying nas* bringup via a script
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48320
2016-01-18 15:35:24 +00:00
Felix Fietkau
6cec31da3c lantiq: fix VDSL device detection with Linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48319
2016-01-18 15:35:17 +00:00
Felix Fietkau
3c3fb1dfc0 ramips: delete the broken sound driver
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48318
2016-01-18 13:40:15 +00:00
Felix Fietkau
63aa7023d8 ramips: mark kmod-sound-mtk as broken, it does not compile properly
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48317
2016-01-18 13:22:38 +00:00
Felix Fietkau
fa61e3fbba ramips: fix kernel config handling for mt7620/mt7628 sound module
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48316
2016-01-18 13:22:34 +00:00
Felix Fietkau
614ebec4d2 firewall: add CONFIG_IPV6 to PKG_CONFIG_DEPENDS to fix a rebuild error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48315
2016-01-18 13:21:37 +00:00
Felix Fietkau
3c8827fa7f iptables: fix rebuild errors on configuration changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48314
2016-01-18 13:21:32 +00:00
Felix Fietkau
aec0e6ac8f build: use sstrip by default for musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48313
2016-01-18 12:47:36 +00:00
Felix Fietkau
8de052800a openssl: remove the separate configuration menu, use the implicit one (via MENU:=1)
Fixes warning on selecting OPENSSL_ENGINE_CRYPTO if openssl is not selected

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48312
2016-01-18 12:42:08 +00:00
Felix Fietkau
edb3c1780c brcm2708: fix RPi model B plus support
Not sure if B+ is used or not (mine has B Plus) so leave both

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48311
2016-01-18 12:42:03 +00:00
Felix Fietkau
a168e972fb kernel: fix MIPS linux-4.4 build on non-GNU systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48310
2016-01-18 11:40:49 +00:00
Felix Fietkau
e4cf25cfab wpa_supplicant: improve generating phase2 config line for WPA-EAP
WPA-EAP supports several phase2 (=inner) authentication methods when
using EAP-TTLS, EAP-PEAP or EAP-FAST (the latter is added as a first
step towards the UCI model supporting EAP-FAST by this commit)
The value of the auth config variable was previously expected to be
directly parseable as the content of the 'phase2' option of
wpa_supplicant.
This exposed wpa_supplicant's internals, leaving it to view-level to
set the value properly. Unfortunately, this is currently not the case,
as LuCI currently allows values like 'PAP', 'CHAP', 'MSCHAPV2'.
Users thus probably diverged and set auth to values like
'auth=MSCHAPV2' as a work-around.
This behaviour isn't explicitely documented anywhere and is not quite
intuitive...

The phase2-string is now generated according to $eap_type and $auth,
following the scheme also found in hostap's test-cases:
http://w1.fi/cgit/hostap/tree/tests/hwsim/test_ap_eap.py
The old behaviour is also still supported for the sake of not breaking
existing, working configurations.

Examples:
  eap_type   auth
  'ttls'     'EAP-MSCHAPV2'     -> phase2="autheap=MSCHAPV2"
  'ttls'     'MSCHAPV2'         -> phase2="auth=MSCHAPV2"
  'peap'     'EAP-GTC'          -> phase2="auth=GTC"

Deprecated syntax supported for compatibility:
  'ttls'     'autheap=MSCHAPV2' -> phase2="autheap=MSCHAPV2"

I will suggest a patch to LuCI adding EAP-MSCHAPV2, EAP-GTC, ... to
the list of Authentication methods available.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48309
2016-01-18 11:40:44 +00:00
Felix Fietkau
fc8a7051cd lantiq: ltq-deu: Remove the "DEU test manager"
Remove the "DEU test manager" code which has not been used for more than
two years (as the kernel module is not installed anymore since r38731).
This fixes compilation on kernel 4.3, which removes
aead_request_set_assoc (and newer kernels).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48308
2016-01-18 11:40:40 +00:00
Felix Fietkau
f577cb25c0 lantiq: Add support for linux 4.4
The following patches were dropped because they are already applied
upstream:
- 0038-MIPS-lantiq-fpi-on-ar9.patch
- 0039-MIPS-lantiq-initialize-usb-on-boot.patch
- 0042-USB-DWC2-big-endian-support.patch
- 0043-gpio-stp-xway-fix-phy-mask.patch

All other patches were simply refreshed, except the following:
- 0001-MIPS-lantiq-add-pcie-driver.patch
  Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled
  some PMU gates for the vrx200 / VR9 SoCs) were removed since the
  upstream kernel disables unused PMU gates automatically (since
  95135bfa7ead1becc2879230f72583dde2b71a0c
  "MIPS: Lantiq: Deactivate most of the devices by default").
- 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
  Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers
  should use of_get_mac_address(). of_get_mac_address_mtd is not
  available for drivers anymore since it's called automatically within
  of_get_mac_address().
- 0028-NET-lantiq-various-etop-fixes.patch
  Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch

While refreshing the kernel configuration SPI support had to be moved to
config-4.4 because otherwise M25P80 was disabled.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48307
2016-01-18 11:40:19 +00:00
Felix Fietkau
e0bfd25295 busybox: fix broken IPv6 address displaying in ifconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48306
2016-01-18 11:11:26 +00:00
Jonas Gorski
a78bb9590f brcm63xx: add support for Huawei HG622
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48305
2016-01-18 10:47:23 +00:00
Jonas Gorski
25ce154605 ipq806x: fix sysupgrade for AP148
AP148 uses lowercase name as boardname, so we need to use this in
platform.sh as well.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48304
2016-01-18 10:46:58 +00:00
Jonas Gorski
74aca7d913 brcm63xx: fix platform gpio lookups for gpios < 32
Overwriting static strings is never a good idea, especially expecting
identical strings to be stored in different memory locations.

This caused the lookups to always return the second chip's name. Fix
this by just initializing the lookup with the right values, so we
don't need to modify the strings at all.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48303
2016-01-18 10:46:50 +00:00
Jonas Gorski
2b3b4c95f1 b53: update header register difinitions
BCM531x5 has two pontential cpu ports, and header mode can be enabled
independently on both.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48302
2016-01-18 10:46:47 +00:00
Jo-Philipp Wich
1bd8400752 package/libs/libiconv: function names
Currently libiconv-stub and libiconv-full use different names
for functions iconv, iconv_open, and iconv_close.

This may lead to failures when building modules, e.g. with
apr-util when NLS is not activated.

The two modules libiconv-stub and libiconv-full should be
interchangeable, so we need the same function names.

cf.
http://git.savannah.gnu.org/cgit/libiconv.git/tree/include/iconv.h.in

After applying this patch execute

	make distclean

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

SVN-Revision: 48301
2016-01-18 09:23:17 +00:00
Luka Perkov
cdfeab0931 imx6: drop 4.1 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48300
2016-01-18 06:43:50 +00:00
Luka Perkov
c4de2dfd2d imx6: drop 4.3 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48299
2016-01-18 06:43:48 +00:00
Luka Perkov
85bdde7cf2 imx6: move to 4.4 kernel
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48298
2016-01-18 06:40:16 +00:00
Felix Fietkau
93a2b8a6c4 mpc85xx: update to linux 4.4, remove unnecessary patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48297
2016-01-17 21:05:19 +00:00
Felix Fietkau
495935a3b8 iproute2: remove odd conffiles generation
This was generating a conffiles list that included the binary
and CONTROL/ files.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48296
2016-01-17 20:41:09 +00:00
Felix Fietkau
d64465556c lantiq: Remove incorrect PCIe compatible strings
Re-defining the compatible property is not required since the correct
value is inherited from vr9.dtsi.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48295
2016-01-17 19:56:16 +00:00
Felix Fietkau
720f599c9a lantiq: Remove the old SPI driver patch
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48294
2016-01-17 19:56:10 +00:00
Felix Fietkau
04ad02d132 lantiq: Switch to the new SPI driver
Compared to the "old" driver:
- Each device must assign a pinctrl setting to the SPI node to allow the
  new SPI driver to configure the SPI pins.
  While here we are also using separate input and output settings so we
  are independent of whether the bootloader configures the pins correctly.
- We use the new "compatible" strings to make the driver choose the
  correct number of chip-selects for each SoC.
- The new driver starts counting the chip-selects at 1 (instead of 0, like
  the old one did). Thus we have to adjust the devices accordingly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48293
2016-01-17 19:56:03 +00:00
Felix Fietkau
5985c56ec6 lantiq: Add a rewritten version of the SPI driver
The new driver provides a few improvements over the old one:
- Separate compatible strings per SoC type (this allows removing some
  hardcoded of_device_is_compatible() checks)
- It does not rely upon spi-bitbang anymore
- chip-selects are numbered as in the datasheet (= starting at 1 instead
  of 0)

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48292
2016-01-17 19:55:55 +00:00
Felix Fietkau
af857db692 lantiq: Disable CONFIG_SPI_GPIO
All devices are now using the HW SPI driver, so this is not necessary
anymore.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48291
2016-01-17 19:55:48 +00:00
Felix Fietkau
d5c5928d6b lantiq: Enable the hardware SPI driver on the DGN3500/DGN3500B
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48290
2016-01-17 19:55:42 +00:00
Felix Fietkau
d8b74320bd lantiq: Enable SPI for the EASY80920 board again
Also switch to the SPI definition provided by vr9.dtsi

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48289
2016-01-17 19:55:37 +00:00
Felix Fietkau
be8f9ad6f4 lantiq: Switch FRITZ3370 from spi-gpio to the hardware SPI driver
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48288
2016-01-17 19:55:31 +00:00
Felix Fietkau
9d558fb48e lantiq: Re-use the SPI node from vr9.dtsi in TDW89X0.dtsi
This removes the duplicate SPI register definition.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48287
2016-01-17 19:55:25 +00:00
Felix Fietkau
a5c177943b lantiq: Add the SPI node to ar9.dtsi and vr9.dtsi
This allows devices to use SPI without having to re-define (and thus
duplicating) the whole SPI node.
By default SPI is disabled (as before) because only few devices need it.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48286
2016-01-17 19:55:17 +00:00
Felix Fietkau
3f8a426056 lantiq: Configure the PCIe reset GPIO using OF
After the latest pinctrl backports there are only 50 (instead of 56 as
before) GPIOs/pins exported (thus the first GPIO on VRX200 SoCs is now
462, before it was 456). This means that any hardcoded GPIOs have to be
adjusted.
This broke the PCIe driver (which seems to be the only driver which uses
hardcoded GPIO numbers), it only reports:
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	ifx_pcie_wait_phy_link_up timeout
	pcie_rc_initialize link up failed!!!!!

To prevent more of these issues in the future we remove the hardcoded
PCIe reset GPIO definition and simply pass it via device-tree (like the
PCI driver does).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48285
2016-01-17 19:55:10 +00:00
Felix Fietkau
1204a1b1e5 lantiq: Use the new pinctrl compatible strings
These were introduced in upstream commit
be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree
bindings" and finally allow us to use the individual pins within our dts
(for example spi_clk, etc.).
Please note that this changes the number of GPIOs which are available for
some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56
pins were exposed. This means that all places which are using hardcoded
GPIO numbers (which are not passed via device-tree) need to be adjusted
(because the first GPIO number is now 462, instead of 456).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48284
2016-01-17 19:55:04 +00:00
Felix Fietkau
ee03fc430d lantiq: Backport upstream pinctrl-xway patches from 4.5
Upstream commit be14811c03cf2 "pinctrl/lantiq: introduce new dedicated
devicetree bindings" allows us to use each pin in the pinmux. This is
useful for example in the "spi" group which contains some pins which
are inputs, and some which are outputs.
These can only be used once the new compatible strings for the pinctrl
node are used.
Additionally 0150-lantiq-pinctrl-xway.patch and the "GPIO PORT3 fix"
(which was part of 0012-pinctrl-lantiq-fix-up-pinmux.patch) were
replaced with their upstream variants which are also in 4.5.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48283
2016-01-17 19:54:59 +00:00
Felix Fietkau
95699dd312 lantiq: ltq-deu: Make the DEU driver compatible with linux 4.2 and newer
Upstream linux 4.2 commit 84be456f883c4685680fba8e5154b5f72e92957e
"remove <asm/scatterlist.h>" requires us to include linux/scatterlist.h
instead. This also works with older kernels (at least 4.1, thanks to
Hauke Mehrtens for testing).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48282
2016-01-17 19:23:14 +00:00
Jo-Philipp Wich
740a2ee163 base-files: Fix sysupgrade overlay saving
A previous change to sysupgrade moved the overlay files into upper/
The -c switch generates a list of files to backup, but the sed
calls did not take this into consideration.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48281
2016-01-17 18:24:30 +00:00
Jo-Philipp Wich
5cf88bb032 netifd: fix PKG_VERSION (#21630)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48280
2016-01-17 17:15:01 +00:00
Gabor Juhos
55b0e261a4 ar71xx/lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the caller
function must reserve stack space for $a0-$a3 registers in case
the callee needs to save its arguments.

The assembly code of the loader does not reserve stack space for
these registers thus when the 'loader_main' function needs to save
its arguments, those will be stored in the 'workspace' area instead
of the stack.

Because the workspace area is also used by other part of the code, the
saved register values gets overwritten and this often leads to failed
kernel boots.

Fix the code to reserve stack space for the registers to avoid this
error.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 48279
2016-01-17 15:29:03 +00:00
Felix Fietkau
c3b01ead44 uclient: update to the latest version, adds many fixes/features
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48278
2016-01-17 12:41:06 +00:00
Felix Fietkau
33d1b2e0f5 kernel: add missing kernel config symbol for crypto-rng (fixes #21596)
Signed-off-by: Lucian Cristian <luci@createc.ro>

SVN-Revision: 48277
2016-01-17 11:17:06 +00:00
Felix Fietkau
b7aab03486 ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4
Change MTD on WNDR4300 and WNDR3700v4 to fully utilize the 128MB flash.

Credit to @Tuochenlyu on GitHub.

Signed-off-by: Chris Marchesi <chrism@vancluevertech.com>

SVN-Revision: 48276
2016-01-17 11:16:56 +00:00
Felix Fietkau
271a348cda mpc85xx: Add PTP node for TL-WD4900 in device tree
PTP requires at least one timer to be 1PPS so describe it.
For testing, load kernel module gianfar_ptp and use ptp4l
from linuxptp.

Copied from FSL P1010RDB reference design.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 48275
2016-01-17 11:16:52 +00:00
Felix Fietkau
e2e8cb8347 network: add virtual tunnel interface (VTI) support
This adds support for configuring VTI interfaces within /etc/config/network.
VTI interfaces are used to create IPsec tunnel interfaces. These interfaces
may be used for routing and other purposes.

Example config:
config interface 'vti1'
	option proto 'vti'
	option mtu '1500'
	option tunlink 'wan'
	option peeraddr '192.168.5.16'
	option zone 'VPN'
	option ikey 2
	option okey 2

config interface 'vti1_static'
	option proto 'static'
	option ifname '@vti1'
	option ipaddr '192.168.7.2/24'

The options ikey and okey correspond to the fwmark value of a ipsec policy.
The may be null if you do not want fwmarks.
Also peeraddr may be 0.0.0 if you want all ESP packets go through the
interface.
Example strongswan config:
conn vti
	left=%any
	leftcert=peer2.test.der
	leftid=@peer2.test
	right=192.168.5.16
	rightid=@peer3.test
	leftsubnet=0.0.0.0/0
	rightsubnet=0.0.0.0/0
	mark=2
	auto=route

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 48274
2016-01-17 11:06:02 +00:00
Felix Fietkau
eb1ac66ce7 netifd: update to the latest version, adds VTI support and a policy routing fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48273
2016-01-17 11:05:53 +00:00