Commit graph

36986 commits

Author SHA1 Message Date
Andrew Yong
faf94d926e ramips: add support for MikroTik hEX v3 (RB750Gr3)
The MikroTik hEX v3 (RB750Gr3) is a MT7621AT board which is similar to most MT7621 reference designs, it can be easily supported by this patch; however, the stock RouterBOOT bootloader has to be replaced by a MT7621 SDK U-Boot such as https://github.com/ndoo/RB750Gr3-U-Boot - U-Boot configured for the RB750Gr3 (16MiB SPI flash, 256MiB DDR3 RAM at 1200MHz).

RouterBOOT, the stock bootloader, does not initialize the UART and boots silently, making it preferable to replace it with a MT7621 SDK U-Boot with UART (57600 8N1) that supports HTTP, TFTP or serial upload of sysupgrade firmware and U-Boot.

Furthermore, RouterOS, the stock firmware, is contained in a proprietary modification of SquashFS without GPL sources; UART is also disabled in stock firmware.

The combination of LEDE firmware generated by this PR and MT7621 SDK U-Boot expects the printed MAC address to reside at offset `0xe000` of the factory partition (absolute offset is `0x4e000`); this is similar to the factory MAC address offset for several other MT7621 devices.

A 16MiB flash dump suitable for use with flashrom will be provided if/once this patch is accepted and binaries are built by LEDE buildbot. Alternatively, writing the U-Boot to the SPI flash starting at 0x0 offset and booting the board with serial console attached will allow TFTP, HTTP or serial upload of sysupgrade firmware.

Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-11-02 10:25:44 +01:00
Karl Palsson
df1804b75c dnsmasq: support log-dhcp option
Helpful when trying to resolve issues with quirky dhcp client devices.

Signed-off-by: Karl Palsson <karlp@etactica.com>
2016-11-02 10:25:44 +01:00
Stijn Segers
2f2ea7b44c kernel: update kernel 4.4 to version 4.4.30
This patch bumps the 4.4 kernel from .28 to .30 and refreshes the patches.
Compile-tested on ar71xx, x86/64, ramips/mt7621, brcm47xx and kirkwood.

Run-tested on ar71xx & ramips/mt7621, brcm47xx and kirkwood (last two confirmed
by P. Wassi).

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2016-11-02 10:25:44 +01:00
Stijn Segers
eefe07ef4d ramips: add usb packages into DIR-860L B1 profile
This patch adds the kmod-usb3 and kmod-usb-ledtrig-usbport packages to the
DIR-860L B1 profile. The DIR-860L B1 has a USB 3 port.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2016-11-02 10:25:44 +01:00
Jo-Philipp Wich
eb10b13f16 iproute2: rename ip to ip-tiny and let both ip-tiny and ip-full provide "ip"
Rename the "ip" package declaration to "ip-tiny" and let both "ip-tiny" and
"ip-full" provide the virtual "ip" package. This allows users to freely choose
the "ip" command variant while other packages can continue to depend on "ip"
without needing to enforce a specific variant.

Note that this commit does not add busybox as "ip" provider due to
the following reasons:

 - The builtin Busybox ip applet cannot be added or removed at runtime
 - Both "ip-tiny" and "ip-full" are able to install without file clashes even
   if the busybox applet is enabled
 - The system is preferring full "ip-tiny" and "ip-full" at runtime, even
   if Busybox ip is still present.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 02:33:30 +01:00
Jo-Philipp Wich
7a58972680 uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)
The current uboot default config for the A13 SOM erroneously enables support
for the AXP209 power regulator IC which is not present on the board.

This superfluous support module sets an incorrect initial clock frequency and
confuses the kernel, ultimately leading to a boot failure later on.

Properly disable the PMIC support and enable the EHCI support by translating
the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and
USB_EHCI_HCD symbols respectively.

Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and
refresh the remaining patches of the series while we're at it.

Reported-by: Mario Fischer <mario-fischer@web.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 02:11:19 +01:00
Jo-Philipp Wich
12d15fa8a5 scripts/package-metadata.pl: honour DEFAULT_VARIANT
So far, package-metadata.pl always considered the first provider of a virtual
package to be the default variant which might deviate from what buildroot
considers to be the default.

Change the Kconfig dependency / select code generation for virtual package
providers to consider the DEFAULT_VARIANT to be the primary provider and only
fall back to the first provider if no default variant was explicitely tagged.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 02:02:44 +01:00
Jo-Philipp Wich
5e0441aaf0 base-files: uci-defaults: support requesting untagged switch port configuration
Introduce support for a new [0-9]u@netdev syntax to ucidev_add_switch() to let
board.d network files request default network switch configurations which do
not use tagged CPU ports.

This commit itself has no effect on generated configurations at the moment
since we still emit untagged configurations by default but it allows boards to
opt-out from default tagged configs in case we start emitting tagged settings
by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 01:06:29 +01:00
Jo-Philipp Wich
317b3556a4 include: properly update .install stamp files
Right now the $(PKG_INSTALL_STAMP) files are only written if a package is
selected as <*> but never deleted or emptied if the corresponding package
is getting deselected.

For ordinary packages this usually is no problem as the package/install
recipe performs its own check for enabled packages when assembling the
list of install stamp files to consider, but this logic might fail under
certain circumstances for packages providing multiple build variants.

In case of a multi-variant package, the buildroot first checks if any
of the variants is enabled, then resolves all variants of the common
source package and finally processes the corresponding .install stamp
files of all variants, relying on the assumption that only the selected
.install stamp file exists.

When an initially selected variant is getting deselected or changed from
<*> to <m> and another variant is marked as <*> instead, the .install
stamp file of the deselected variant remains unchanged and a second
.install stamp file for the newly selected variant is getting created,
causing the package/install recipe to pick up two .install stamps with
conflicting variants, leading to opkg file clashes.

This issue happens for example if package "ip" is set to <m> and package
"ip-full" to <*> -  the install command will eventually fail with:

     * check_conflicts_for: The following packages conflict with ip:
     * check_conflicts_for: 	ip-full *
     * opkg_install_cmd: Cannot install package ip.

In order to fix the problem, always process the removal requests or the
.install stamp files, even for deselected packages but only write the
package base name into the stamp file if the corresponding package is
marked as builtin.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 01:01:35 +01:00
Jo-Philipp Wich
f64360c7ca scripts/package-metadata.pl: fix handling of virtual (PROVIDES) depends
Currently the code emitting dependencies for provide candidates is overwriting
the specification calculated by the previous conditional dependency handling
code, rendering dependencies on virtual PROVIDES packages in conjunction with
conditional dependencies unusable.

Instead of overwriting, append the PROVIDES dependency spec in order to fix
using DEPENDS on virtual provider packages in conjunction with conditions.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 01:01:34 +01:00
Jo-Philipp Wich
b7f7e9fe42 include/host-build.mk: use STAGING_DIR_HOSTPKG
Instead of hardcoding $(STAGING_DIR)/host, use the new $(STAGING_DIR_HOSTPKG)
variable to refer to the directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-01 12:11:14 +01:00
Jo-Philipp Wich
d7bec5609c rules.mk: add STAGING_DIR_HOSTPKG variable
Add a STAGING_DIR_HOSTPKG variable which refers to $(STAGING_DIR)/host in order
to prepare support for relocating that directory in the future.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-01 12:11:14 +01:00
Jo-Philipp Wich
fb58cd2fed fstools: add build-depends on util-linux
The libblkid probe support in fstools git head requires blkid/blkid.h for
compilation, so add a build dependency on util-linux which provides libblkid.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-01 09:52:03 +01:00
Henryk Heisig
8cc0c34ef5 ar71xx: Add support to Powerline ac TP-Link WPA8630
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-10-31 17:13:37 +01:00
Yutang Jiang
15a14cf166 layerscape: add 64b/32b target for ls1012ardb device
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00
Yutang Jiang
c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00
Henryk Heisig
a34f96d6cf ramips: Archer C50 cleanup
- setting read-only flag to important partitions
- enabling PA to improve 2.4 GHz signal strength
- add missing leds
- rename colour led
- add mac adress to 5GHz wlan interface
- included <dt-bindings/input/input.h> and <dt-bindings/gpio/gpio.h>

Signed-off-by: Henryk Heisig hyniu@o2.pl
2016-10-31 16:58:41 +01:00
Stefan Koch
7929ab60bf lantiq: add vpe/watchdog modules to kernel
(required not-distributable firmware blob - dump it by yourself from original firmware)

Signed-off-by: Eddi De Pieri <eddi@depieri.net>

(cherry picked from commit 064f467264c5c9b6eca0bb96b587f9412b770cc5)
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:33 +01:00
Stefan Koch
a7672fa5b4 lantiq: added xrx200 as plattform for ltqvmmc
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:33 +01:00
Stefan Koch
8c08ccc937 lantiq: added xrx200 as plattform for ltqtapi
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:33 +01:00
Stefan Koch
4552bf158c lantiq: vpe softdog
(required not-distributable firmware blob - dump it by yourself from original firmware)

Signed-off-by: Eddi De Pieri <eddi@depieri.net>

(cherry picked from commit eb0ce57270d0b5b81b224b9336cf54707497eede)

Modified after cherry-pick:
obj in Makefile

Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:33 +01:00
Stefan Koch
e0229a16b0 lantiq: added support for VPE1
Created minimal patchset based on BB rev 43158 by Eddi De Pieri
14.07/openwrt.git 79472c025449efae9310defad0d3a73cff14d756

If the VR9 based router provides FXS ports and they shoud enabled then
the following must added to the kernel command line:
mem=[TOTALMEMSIZE-2M] vpe1_load_addr=ADDRESS vpe1_mem=2M maxvpes=1
maxtcs=1

To use FXS 2M of RAM are needed for the VPE firmware. The size is set
by vpe1_mem.
The available RAM must be reduced by this size using the mem argument.
A correct load address (example 0x83e00000) for the firmware must be given,
too.

Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:33 +01:00
Stefan Koch
01ab5209c0 lantiq: modify vr9.dts to support vmmc
(required not-distributable firmware blob - dump it by yourself from original firmware)

Signed-off-by: Eddi De Pieri <eddi@depieri.net>

(cherry picked from commit 8d924d43c0ea6839a3a33e54982e8da48b736001)

Modified after cherry-pick:
compatible attribute

Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:32 +01:00
Stefan Koch
04cf9443c5 lantiq: fix vmmc build
(required not-distributable firmware blob - dump it by yourself from original firmware)

Signed-off-by: Eddi De Pieri <eddi@depieri.net>

(cherry picked from commit 47b1ff965b0cb57013b40fbe2bcd7f3c6eb6b606)

Modified after cherry-pick:
FW_MD5SUM in Makefile

Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:29 +01:00
Stefan Koch
29367aac42 lantiq: ltq-vmmc add support for ar9-vr9
(required not-distributable firmware blob - dump it by yourself from original firmware)

Signed-off-by: Eddi De Pieri <eddi@depieri.net>

(cherry picked from commit ea9e61b8eb61a2e362a50541f03466dc7d087947)
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:49:55 +01:00
Pavel Kubelun
8f7e58c0fe ipq806x: add reserved memory node in Netgear R7800
KERNEL BUG: BAD_PAGE_STATE in process appears here and there during intensive memory usage.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-10-31 16:48:04 +01:00
Rosen Penev
369884c2a1 ramips: Add RTC driver to kernel for working hctosys
Build the RTC driver into the kernel, (and remove the optional module), in order
to make hctosys working. (Currently the module is loaded after hctosys has failed previously)

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2016-10-31 16:41:26 +01:00
Henryk Heisig
0744b6a044 ipq806x: ArcherC2600: export usb power pins
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-10-31 16:40:54 +01:00
Henryk Heisig
dbf2feb2b3 ipq806x: ArcherC2600: devictree cleanup
add blank lines and use macros for GPIOs

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-10-31 16:40:28 +01:00
John Crispin
d15dc7e85d fstools: update to latest git HEAD
adds f2fs support

Signed-off-by: John Crispin <john@phrozen.org>
2016-10-31 16:38:26 +01:00
Paul Wassi
a569354481 kernel: update kernel 4.4 to version 4.4.28
Refresh patches for all targets that support kernel 4.4.
compile/run-tested on ar71xx, brcm47xx, kirkwood.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-10-31 16:33:53 +01:00
Petr Štetiar
9e8e8b7253 base-files: sysfixtime: Keep RTC time in UTC timezone
We need to tell hwclock with -u commandline option, that we would like
to keep our RTC clock in UTC timezone. Linux kernel expects RTC in UTC
timezone anyway.

In current state of things, we don't tell hwclock to load/store time
from/to RTC in UTC timezone so it uses the timezone from the system
time. If it's set to different timezone then UTC, sysfixtime is going to
screw the time in RTC.

I've following in the setup script:

  uci set system.@system[0].timezone='CET-1CEST,M3.5.0,M10.5.0/3'
  uci set system.@system[0].zonename='Europe/Prague'

I've this RTC setup (rtc1 is RTC on i.MX6 SoC, rtc0 is battery backed RTC mcp7941x):

  rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0
  snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1

Then we can experience following (current time is 10:15am):

	$ date
	Fri Oct 21 10:15:07 CEST 2016

	$ hwclock -r -f /dev/rtc0
	Fri Oct 21 08:14:46 2016  0.000000 seconds

	$ hwclock -u -r -f /dev/rtc0
	Fri Oct 21 10:14:46 2016  0.000000 seconds

And after current broken sysfixtime:

	$ /etc/init.d/sysfixtime stop

	$ date
	Fri Oct 21 10:15:25 CEST 2016

	$ hwclock -r -f /dev/rtc0
	Fri Oct 21 10:15:31 2016  0.000000 seconds

Now we've time in our battery backed RTC in CEST timezone instead of
UTC.  Then once again, but with this patch applied to sysfixtime, where
hwclock is using correctly the -u parameter:

	$ /etc/init.d/sysfixtime stop

	$ date
	Fri Oct 21 10:15:53 CEST 2016

	$ hwclock -r -f /dev/rtc0
	Fri Oct 21 08:15:55 2016  0.000000 seconds

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2016-10-31 16:33:19 +01:00
Hauke Mehrtens
76847c7fc9 kernel: deactivate CONFIG_QCOM_SPMI_TEMP_ALARM
This fixes the build of the ipq806x target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-10-31 14:35:30 +01:00
Alexis Green
12f0d5402c hostapd: properly package wpa-supplicant-mesh
Ensure that selecting the wpa-supplicant-mesh package actually packages the
wpa_supplicant binary with SAE support and add missing dependency on OpenSSL.

Signed-off-by: Alexis Green <alexis@cessp.it>
[Jo-Philipp Wich: slightly reword commit message for clarity]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-31 13:46:01 +01:00
Petr Konecny
6797a10fa1 hostapd support for VLANs through a file in addition to Radius.
Signed-off-by: Petr Konecny <pekon@google.com>
2016-10-31 13:24:58 +01:00
Daniel Dickinson
98c86e2970 uhttpd: Add Basic Auth config
We add an 'httpauth' section type that contains the options:

prefix: What virtual or real URL is being protected
username: The username for the Basic Auth dialogue
password: Hashed (crypt()) or plaintext password for the Basic Auth dialogue

httpauth section names are given included as list
items to the instances to which they are to be applied.

Further any existing httpd.conf file (really whatever
is configured in the instance, but default of
/etc/httpd.conf) is appended to the per-instance httpd.conf

Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
2016-10-31 13:22:51 +01:00
Hannu Nyman
671cb35880 musl: fix parsing of quoted time zone names
fix parsing of the < > quoted time zone names. Compare the correct
character instead of repeatedly comparing the first character.

Patch has been submitted to upstream as
http://www.openwall.com/lists/musl/2016/10/24/3

Longer explanation in
http://www.openwall.com/lists/musl/2016/10/19/1

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[Jo-Philipp Wich: move references into commit message, shorten title prefix]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-31 12:55:27 +01:00
Chris Blake
53b43e65e7 ar71xx: Add net config for MR12 & MR16
Both the MR12 and MR16 are single gigabit ethernet devices, similar to the
MR18. This change gives them the correct network config on a fresh install.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
[Jo-Philipp Wich: adjust for alphabetical ordering, line wrap commit msg]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-31 12:52:56 +01:00
Christian Mehlis
7cb82d4b70 ar71xx: fix ethernet on wpj344 board
In 814d70b2 the member mac06_exchange_en of struct
ar8327_pad_cfg was changed to mac06_exchange_dis,
but wpj344 was not adopted to stay in sync.

Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Reported-by: Nick Dennis <ndennis@rapiduswireless.com>
2016-10-31 12:52:56 +01:00
Alexandru Ardelean
b7fadb12b7 lldpd: freeze execution of lldpd during reload
During reload, we could send invalid information to the other
side and confuse it.

That's why, during reload we'll pause execution, do the reconfig
and resume + update when reload is done.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-31 12:51:15 +01:00
Alexandru Ardelean
909f063066 lldpd: fix reload function for when interfaces change
The problem is that interfaces are specified at start as
command line arguments, making them unchange-able via reload.

That means, we have to move (since lldpd allows this) the
interfaces-match-pattern option to be in a config file and reload
the configuration.
It's either that, or do a 'restart'.

Since we're generating the lldpd.conf file, we'll have to
move the 'sysconfdir' of lldpd to /tmp, where the files will
get written ; this will prevent any unncessary flash writes.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-31 12:51:15 +01:00
Pavel Kubelun
ccf0648e72 ath10k-firmware: update qca9984 firmware
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
[Jo-Philipp Wich: add mirror sha256 sum]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-31 12:49:57 +01:00
Alexandru Ardelean
00d1e6c75e firmware-utils: fix compilation on MacOS X
Looking into /usr/include/stdlib.h, there's a `devname()` function defined
under some #ifdef's which conflicts with the `static char *devname` definition
in `src/mkwrggimg.c`.

Defining `_ANSI_SOURCE` in the `src/mkwrggimg.c` file, omits that part of the
header.

Another more intrusive approach is to rename `devname` to something like
`g_devname` in `src/mkwrggimg.c`. But I think the `_ANSI_SOURCE` define should
be enough.

Compilation error is:

    src/mkwrggimg.c:64:14: error: redefinition of 'devname' as different kind of symbol
    static char *devname;
                 ^
    /usr/include/stdlib.h:286:7: note: previous definition is here
    char    *devname(dev_t, mode_t);
             ^
    src/mkwrggimg.c:147:12: error: non-object type 'char *(dev_t, mode_t)' (aka 'char *(int, unsigned short)') is not assignable
                            devname = optarg;
                            ~~~~~~~ ^
    src/mkwrggimg.c:192:6: warning: comparison of function 'devname' equal to a null pointer is always false [-Wtautological-pointer-compare]
            if (devname == NULL) {
                ^~~~~~~    ~~~~
    src/mkwrggimg.c:192:6: note: prefix with the address-of operator to silence this warning
            if (devname == NULL) {
                ^
                &
    src/mkwrggimg.c:251:27: warning: incompatible pointer types passing 'char *(dev_t, mode_t)' (aka 'char *(int, unsigned short)') to parameter of type 'const char *' [-Wincompatible-pointer-types]
            strncpy(header->devname, devname, sizeof(header->devname));
                                     ^~~~~~~
    /usr/include/secure/_string.h:119:34: note: expanded from macro 'strncpy'
      __builtin___strncpy_chk (dest, src, len, __darwin_obsz (dest))

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
[Jo-Philipp Wich: slightly reformat commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-31 12:39:09 +01:00
Rafał Miłecki
f20ba0f0d5 brcm47xx: image: use append-rootfs step for per-device rootfs support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-28 17:03:55 +02:00
Rafał Miłecki
027b2c5b83 brcm47xx: image: make TRX steps work with rootfs passed as $@
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-28 16:46:57 +02:00
Rafał Miłecki
8bd2167236 brcm47xx: image: make linksys-pattern-partition leave specific file
Thanks to leaving .pattern file we can easily insert extra step between
linksys-pattern-partition and trx-v2-with-loader, e.g. rootfs one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-28 16:41:05 +02:00
Rafał Miłecki
c9fdb23345 apm821xx: fix USB LED trigger for WNDR4700
The old usbdev trigger never supported assigning more than 1 USB port.
This code we got was never working as expected and it was missing 2 more
ports. Switch to usbport to have LED working with all ports.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
2016-10-28 13:27:21 +02:00
John Crispin
1e3c4f763c openvpn: cacert does not exist
cacert is really called ca and already in the script

Signed-off-by: John Crispin <john@phrozen.org>
2016-10-27 19:53:01 +02:00
Jo-Philipp Wich
dc6cc04016 config: ext4: increase x86 rootfs size to 2GB to support online resize2fs
The current default rootfs size of 256MB in conjunction with 4K blocks
produces an ext4 filesystem which lacks the appropriate amount of backup GDT
entries to support online-resizing.

For x86 targets, increase the default rootfs size to 2048MB which allows
online resizing the filesystem to up to 2TB which is the current theoretical
maximum for LEDE, due to missing GPT support on the root block device.

Note that the filesystem artefact will not occupy 2GB on the build system as
the make_ext4fs utility uses sparse files to generate the filesystem images,
so the actual disk usage is much lower. Furthermore the filesystem images
are gzip compressed, shrinking them to only a few megabytes on the download
server.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Michael Heimpold <mhei@heimpold.de>
2016-10-27 19:24:38 +02:00
Jo-Philipp Wich
d1ae4c4958 config: ext4: drop option to set maximum number of inodes
There is very little practical use to limit the number of available inodes on
an ext4 filesystem and the make_ext4fs utility is able to calculate useful
defaults by itself.

Drop the option to make resulting ext4 filesystems more flexible by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Michael Heimpold <mhei@heimpold.de>
2016-10-27 19:24:38 +02:00