KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
28000 commits 3 branches 0 tags 154 MiB
Commit graph

424 commits

Author SHA1 Message Date
Felix Fietkau
c918810414 ar71xx: switch to kmod-gpio-button-hotplug 
SVN-Revision: 30660
 2012-02-20 10:51:48 +00:00
Gabor Juhos
1c57a22aae ar71xx: add model detection for TL-WR842N/ND 
SVN-Revision: 30507
 2012-02-13 17:11:57 +00:00
Felix Fietkau
61f48beadd ar71xx: fix db120 board detection 
SVN-Revision: 30408
 2012-02-10 11:46:31 +00:00
Gabor Juhos
48e85cd47b ar71xx: add support for the TRENDNet TEW-673GRU board 
SVN-Revision: 30376
 2012-02-08 16:26:25 +00:00
Gabor Juhos
41bd6bd282 ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards 
SVN-Revision: 29978
 2012-01-31 20:49:34 +00:00
Gabor Juhos
dd47afc197 ar71xx: fix ethernet LEDs on the DIR-600-A1 board 
SVN-Revision: 29975
 2012-01-31 18:37:24 +00:00
Gabor Juhos
8200f0c61a ar71xx: unify LED names on D-Link boards 
SVN-Revision: 29974
 2012-01-31 18:37:15 +00:00
Gabor Juhos
faeca86e50 ar71xx: support for D-LINK DIR-615 rev. E4 
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

SVN-Revision: 29973
 2012-01-31 18:37:09 +00:00
Gabor Juhos
97e4ddd012 ar71xx: add support for TP-Link TL-MR11U 
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

SVN-Revision: 29972
 2012-01-31 18:37:01 +00:00
Florian Fainelli
eeb00634a7 add support for the Atheros AP113 reference board 
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

SVN-Revision: 29935
 2012-01-28 13:19:49 +00:00
Gabor Juhos
e1e84badaa ar71xx: add support for Compex WPE72/WPE72NX 
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.

[juhosg: add support to 3.2 as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29912
 2012-01-26 17:01:41 +00:00
Gabor Juhos
038d4e0d77 ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour 
This patch fixes the board detection of the TL-MR3020.

The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.

The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.

[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29905
 2012-01-25 07:44:45 +00:00
Gabor Juhos
23e1b451dc ar71xx: preset WLAN LED config on MZK-W300NH 
SVN-Revision: 29896
 2012-01-24 18:40:36 +00:00
Gabor Juhos
a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

SVN-Revision: 29680
 2012-01-07 19:36:35 +00:00
Gabor Juhos
f638c6207b ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards 
SVN-Revision: 29672
 2012-01-06 15:54:59 +00:00
Gabor Juhos
1e848b17ad ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
 2012-01-06 07:20:59 +00:00
Gabor Juhos
84cd8a5ee0 ar71xx: fix RB-750 network configuration 
SVN-Revision: 29668
 2012-01-06 07:20:54 +00:00
Gabor Juhos
232eb83f74 ar71xx: fix LED configuration on the RB-750 
SVN-Revision: 29666
 2012-01-05 18:08:28 +00:00
Gabor Juhos
b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
 2012-01-04 21:13:54 +00:00
Gabor Juhos
2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
 2012-01-04 17:30:57 +00:00
Gabor Juhos
301b1b4f92 ar71xx: show correct model name on TL-WA701N/ND boards 
SVN-Revision: 29657
 2012-01-04 17:30:55 +00:00
Gabor Juhos
72019009c7 ar71xx: fix network configuration for the TL-WA901N/ND boards 
SVN-Revision: 29654
 2012-01-04 17:30:52 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
SVN-Revision: 29653
 2012-01-04 17:30:50 +00:00
Gabor Juhos
5eb502d9c1 ar71xx: add default LED configuration for the TL-MR3020 
Also use the system LED for diagnostic.

SVN-Revision: 29652
 2012-01-04 17:30:49 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
 2012-01-04 17:30:47 +00:00
Gabor Juhos
1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards 
SVN-Revision: 29635
 2012-01-01 19:30:25 +00:00
Gabor Juhos
5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
SVN-Revision: 29631
 2011-12-31 15:02:46 +00:00
Gabor Juhos
557009bbdb ar71xx: fix LEDs on the WRT400N 
SVN-Revision: 29624
 2011-12-31 13:54:11 +00:00
Gabor Juhos
76dacee995 ar71xx: enable sysupgrade support for airrouter 
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 29614
 2011-12-27 16:59:43 +00:00
Gabor Juhos
c6ee919b2a ar71xx: fix sysupgrade on PB42/PB44 boards 
SVN-Revision: 29613
 2011-12-27 16:57:01 +00:00
Jonas Gorski
8799627ef0 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H 
Thanks netprince for reporting and testing.

SVN-Revision: 29595
 2011-12-21 19:32:40 +00:00
Felix Fietkau
0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
 2011-12-18 22:20:17 +00:00
Gabor Juhos
67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
 2011-12-15 22:25:38 +00:00
Gabor Juhos
b9c5cb5c9a ar71xx: add support for ALFA Network's Hornet-UB board 
SVN-Revision: 29535
 2011-12-14 20:54:10 +00:00
Gabor Juhos
058998acdb ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29513
 2011-12-13 14:59:40 +00:00
Gabor Juhos
8eb8a6e1e7 ar71xx: fix WNDR3x00 model detection 
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.

r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.

I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29472
 2011-12-07 06:55:39 +00:00
Gabor Juhos
f7a482d382 ar71xx: add TP-Link board detection 
SVN-Revision: 29459
 2011-12-05 21:11:01 +00:00
Gabor Juhos
c6bcf8d1d8 ar71xx: verify hardware id of firmware images on TP-Link boards 
SVN-Revision: 29455
 2011-12-05 18:11:51 +00:00
Felix Fietkau
1f809532de ar71xx: add preliminary support for wzr-hp-g450h 
SVN-Revision: 29441
 2011-12-05 14:20:51 +00:00
Gabor Juhos
4cc2b9bb06 ar71xx: rewrite WNDR3700/3800 handling 
SVN-Revision: 29434
 2011-12-05 13:03:54 +00:00
Jo-Philipp Wich
78699c2e51 add some missing wndr3800 base-files definitions 
SVN-Revision: 29433
 2011-12-05 12:56:21 +00:00
Gabor Juhos
5177814ade ar71xx: change user-space board detection 
SVN-Revision: 29432
 2011-12-05 12:56:20 +00:00
Gabor Juhos
f188f1bad5 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

SVN-Revision: 29395
 2011-12-01 22:49:02 +00:00
Gabor Juhos
0612667c34 ar71xx: configure default led behavior for the OM2P 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 29394
 2011-12-01 22:48:59 +00:00
Gabor Juhos
39348e387f ar71xx: use /lib/functions/uci-defaults.sh 
SVN-Revision: 29385
 2011-12-01 22:48:47 +00:00
Gabor Juhos
c20d7378e5 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 29326
 2011-11-24 20:09:38 +00:00
Gabor Juhos
d461fdd519 ar71xx: add diag support for the DB120 board 
SVN-Revision: 28975
 2011-11-12 10:54:10 +00:00
Gabor Juhos
8687fc3e41 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28971
 2011-11-12 10:54:04 +00:00
Gabor Juhos
87704b8078 ar71xx: create TL-WA901ND network config from uci-defaults 
SVN-Revision: 28833
 2011-11-07 21:44:24 +00:00
Gabor Juhos
09fdfa444f ar71xx: create ALL0258N network config from uci-defaults 
SVN-Revision: 28832
 2011-11-07 21:44:23 +00:00
Gabor Juhos
63348f5fed ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults 
SVN-Revision: 28831
 2011-11-07 21:44:20 +00:00
Gabor Juhos
c3692c8331 ar71xx: create WZR-HP-G300NH network config from uci-defaults 
SVN-Revision: 28830
 2011-11-07 21:44:17 +00:00
Gabor Juhos
ee1a07a11d ar71xx: create RB-493G network config from uci-defaults 
SVN-Revision: 28829
 2011-11-07 21:44:12 +00:00
Gabor Juhos
d82d063d81 ar71xx: create TL-WR1043ND network config from uci-defaults 
SVN-Revision: 28828
 2011-11-07 21:44:11 +00:00
Gabor Juhos
68be590894 ar71xx: create WRT160NL network config from uci-defaults 
SVN-Revision: 28827
 2011-11-07 21:44:09 +00:00
Gabor Juhos
83901e47c9 ar71xx: create PB92 network config from uci-defaults 
SVN-Revision: 28826
 2011-11-07 21:44:08 +00:00
Gabor Juhos
22ab9fc9ad ar71xx: create DIR-825-B1 network config from uci-defaults 
SVN-Revision: 28825
 2011-11-07 21:44:07 +00:00
Gabor Juhos
e866ba5753 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults 
SVN-Revision: 28824
 2011-11-07 21:44:03 +00:00
Gabor Juhos
9298c7afe5 ar71xx: create RB-450 network config from uci-defaults 
SVN-Revision: 28823
 2011-11-07 21:44:02 +00:00
Gabor Juhos
ac256f97bd ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults 
SVN-Revision: 28822
 2011-11-07 21:44:01 +00:00
Gabor Juhos
944ac3f6cf ar71xx: create RB-433{,U} network config from uci defaults 
SVN-Revision: 28821
 2011-11-07 21:43:58 +00:00
Gabor Juhos
6e8390ae6c ar71xx: create even more network configs from the uci-defaults script 
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

SVN-Revision: 28820
 2011-11-07 21:43:56 +00:00
Gabor Juhos
b62560413a ar71xx: create more network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

SVN-Revision: 28819
 2011-11-07 21:43:54 +00:00
Gabor Juhos
6c92b26bac ar71xx: create a bunch of network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
a single ethernet interface.

SVN-Revision: 28818
 2011-11-07 21:43:52 +00:00
Gabor Juhos
0a8e5dbf7b ar71xx: create generic network config from an uci-defaults script 
SVN-Revision: 28817
 2011-11-07 21:43:51 +00:00
Gabor Juhos
54c034ae7a ar71xx: remove AP81 defconfig, it is the same as the generic config 
SVN-Revision: 28816
 2011-11-07 21:34:33 +00:00
Gabor Juhos
eb9ef60e2d ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards 
SVN-Revision: 28812
 2011-11-07 20:25:00 +00:00
Gabor Juhos
8456840d82 ar71xx: wrap long lines in the upgrade script 
SVN-Revision: 28811
 2011-11-07 20:24:59 +00:00
Gabor Juhos
b27254a2c5 ar71xx: add default network configuration for the WHR-HP-GN 
SVN-Revision: 28807
 2011-11-07 13:32:43 +00:00
Gabor Juhos
a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board 
SVN-Revision: 28805
 2011-11-07 12:59:10 +00:00
Gabor Juhos
4509af17ed ar71xx: add support for the Buffalo WHR-G301N board 
SVN-Revision: 28803
 2011-11-07 12:59:07 +00:00
Gabor Juhos
91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
 2011-11-01 11:20:52 +00:00
Gabor Juhos
43e2e2e4ef ar71xx: combine LEDs setup in one file 
SVN-Revision: 28704
 2011-11-01 11:20:49 +00:00
Gabor Juhos
f372620ffa ar71xx: unify LED names on Planex boards 
SVN-Revision: 28703
 2011-11-01 11:20:47 +00:00
Gabor Juhos
66ab406d5a ar71xx: unify LED names on Buffalo boards 
SVN-Revision: 28702
 2011-11-01 11:20:46 +00:00
Gabor Juhos
e7586959df ar71xx: unify LED names on TP-Link boards 
SVN-Revision: 28701
 2011-11-01 11:20:44 +00:00
Gabor Juhos
3a7b12a27d ar71xx/all0258n: sysupgrade support 
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28700
 2011-11-01 09:23:32 +00:00
Gabor Juhos
f40557a692 ar71xx/all0258n: add default config 
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28699
 2011-11-01 09:23:31 +00:00
Gabor Juhos
06d9653b36 ar71xx: remove default network config of the mzk-w04nu board as well 
It works with the generic config.

SVN-Revision: 28695
 2011-11-01 09:23:25 +00:00
Gabor Juhos
693c777eaf ar71xx: remove LED setup of nonexistent interfaces on RB750 
SVN-Revision: 28693
 2011-10-31 14:26:56 +00:00
Gabor Juhos
2bcd612e72 ar71xx: remove default network config of the wnr2000 board 
It is the same as the generic configuration.

SVN-Revision: 28692
 2011-10-31 14:26:51 +00:00
Gabor Juhos
39b3bfcf6a ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value 
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28678
 2011-10-30 13:06:30 +00:00
Gabor Juhos
1646346798 ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
 2011-10-27 07:54:51 +00:00
Gabor Juhos
9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
 2011-10-24 21:49:26 +00:00
Gabor Juhos
d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
 2011-10-24 21:49:21 +00:00
Jo-Philipp Wich
b61de9c865 base-files: make sure inittab-console-fixup returns with success (#10275) 
SVN-Revision: 28562
 2011-10-24 21:35:43 +00:00
Jonas Gorski
a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G 
SVN-Revision: 28423
 2011-10-11 23:05:16 +00:00
Gabor Juhos
e45d7d7006 ar71xx: enable login only on the system console by default 
SVN-Revision: 28294
 2011-09-23 19:56:38 +00:00
Gabor Juhos
733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
 2011-09-21 11:47:53 +00:00
Gabor Juhos
85b858fae6 ar71xx: enable sysupgrade on the AP96 and DB120 boards 
SVN-Revision: 27901
 2011-08-04 19:41:18 +00:00
Gabor Juhos
fb77134596 ar71xx: use the same test for AP121 and Zcomax sysupgrade images 
SVN-Revision: 27900
 2011-08-04 19:41:17 +00:00
Jonas Gorski
e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
 2011-07-28 11:57:51 +00:00
Felix Fietkau
7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650) 
SVN-Revision: 27434
 2011-07-04 03:03:34 +00:00
Jo-Philipp Wich
701543d3ef revert r27043 (#9513) 
SVN-Revision: 27343
 2011-07-01 19:52:57 +00:00
Jo-Philipp Wich
1edef5ec98 revert r27341, it introduce wrong behaviour for other models 
SVN-Revision: 27342
 2011-07-01 19:15:45 +00:00
Jo-Philipp Wich
3b3103b2f1 turn status LED off if device finished initializing 
SVN-Revision: 27341
 2011-07-01 18:39:53 +00:00
Felix Fietkau
cc56af716c ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
SVN-Revision: 27283
 2011-06-25 13:54:42 +00:00
Vasilis Tsiligiannis
70106f153d Remove trailing spaces, convert spaces to tabs 
SVN-Revision: 27153
 2011-06-09 19:30:50 +00:00
Felix Fietkau
9160e06af5 ar71xx: override inittab to enable login on ttyATH0 
SVN-Revision: 27128
 2011-06-07 17:07:10 +00:00
Gabor Juhos
9e435c03e0 ar71xx: add sysupgrade support for the AP121 boards 
SVN-Revision: 27069
 2011-05-31 22:53:45 +00:00
Gabor Juhos
646937135f ar71xx: add default network config for the AP121 boards 
SVN-Revision: 27068
 2011-05-31 22:53:44 +00:00
Gabor Juhos
650c7cc2fd ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards 
SVN-Revision: 27043
 2011-05-31 22:53:13 +00:00
Gabor Juhos
4834fdaccd ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards 
SVN-Revision: 27042
 2011-05-31 22:53:12 +00:00
Gabor Juhos
b39eebdf1e ar71xx: add uci config for the WLAN LED on the WRT160NL 
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

SVN-Revision: 26861
 2011-05-08 21:38:49 +00:00
Gabor Juhos
858e2e719b ar71xx: use phy0tpt trigger for the WLAN LEDs 
SVN-Revision: 26860
 2011-05-08 21:38:48 +00:00
Felix Fietkau
cbc75a9c70 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config 
SVN-Revision: 26779
 2011-04-28 21:27:42 +00:00
Alexandros C. Couloumbis
f13581eedb linux/ar71xx: update wget2nand script 
SVN-Revision: 26747
 2011-04-21 12:38:25 +00:00
Gabor Juhos
e193547733 ar71xx: use the gpio_keys_polled driver instead of gpio_buttons 
SVN-Revision: 26603
 2011-04-12 09:29:21 +00:00
Gabor Juhos
54ede24829 ar71xx: Add support for WZR-HP-G301NH 
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26601
 2011-04-12 09:29:10 +00:00
Felix Fietkau
784d808d07 ar71xx: add default configuration for the switch on AP96 
Enables forwarding of frames between the switch ports (eth0).
Patch by Jouni Malinen

SVN-Revision: 26180
 2011-03-15 19:51:42 +00:00
Gabor Juhos
8eb616de82 ar71xx: add support for the TP-Link TL-WA901ND v2 board 
Patch-by: Jonathan Benett <jbscience87@gmail.com>

SVN-Revision: 26119
 2011-03-13 15:08:31 +00:00
Gabor Juhos
67c3e0bf7e ar71xx: add support for the WNDR3700v2 board 
Based on a patch by Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25118
 2011-01-26 20:35:42 +00:00
Gabor Juhos
061228d73c ar71xx: make uci-default scripts executable 
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>

SVN-Revision: 24897
 2011-01-04 13:44:01 +00:00
Claudio Mignanti
2c0596cd69 unifi: add sysupgrade and leds support 
SVN-Revision: 24737
 2010-12-20 17:28:34 +00:00
Gabor Juhos
e7ea6387a3 ar71xx: use usbdev trigger for USB LEDs by default 
SVN-Revision: 24648
 2010-12-17 17:10:16 +00:00
Gabor Juhos
a26c3e60e2 ar71xx: populate LED configuration for WZR-HP-G300NH 
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

SVN-Revision: 24642
 2010-12-17 17:09:57 +00:00
Gabor Juhos
a2a5598c00 ar71xx: add wlan led for the TL-WR941ND 
SVN-Revision: 24612
 2010-12-15 19:55:50 +00:00
Gabor Juhos
9f38f9bf76 ar71xx: add missing files for the JA76PF board 
SVN-Revision: 24444
 2010-12-10 19:55:28 +00:00
Gabor Juhos
b680f088ba ar71xx: add support for the jjPlus JA79PF 
Patch-by: Cezary Jackiewicz

SVN-Revision: 24440
 2010-12-10 17:57:51 +00:00
Gabor Juhos
5b0c83edd9 ar71xx: add support for the TP-LINK TL-MR3220 v1 board 
SVN-Revision: 24439
 2010-12-10 17:57:48 +00:00
Gabor Juhos
83834da33b ar71xx: add default network configuration file for the TL-MR3420 
SVN-Revision: 24437
 2010-12-10 17:57:40 +00:00
Gabor Juhos
081796fe47 ar71xx: add nbg460n image generation 
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 24419
 2010-12-10 15:17:03 +00:00
Jo-Philipp Wich
6f7e2d4ce8 tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups 
SVN-Revision: 24215
 2010-12-02 20:19:55 +00:00
Felix Fietkau
5f3f1b8cd8 ar71xx: Configure WNDR3700 switch LED colors properly (#8103) 
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23879
 2010-11-04 18:55:16 +00:00
Felix Fietkau
b3b2227869 Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on submitter's request 
SVN-Revision: 23878
 2010-11-04 18:53:18 +00:00
Felix Fietkau
77eee74d56 ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984) 
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23877
 2010-11-04 18:48:22 +00:00
Felix Fietkau
fc035b3cb6 ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver 
SVN-Revision: 23439
 2010-10-14 13:41:42 +00:00
Felix Fietkau
3941621dbc ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563) 
SVN-Revision: 23432
 2010-10-14 00:14:59 +00:00
Gabor Juhos
697f5d0bdd ar71xx: initial support for jjPlus JWAP003 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

SVN-Revision: 23165
 2010-10-01 07:09:29 +00:00
Gabor Juhos
32d12d5e5c ar71xx: add support for the TL-MR3420 v1 board 
SVN-Revision: 23136
 2010-09-27 14:53:59 +00:00
Felix Fietkau
a7bb7dd99e Add support for Atheros AP96 reference board 
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23125
 2010-09-27 08:59:53 +00:00
Gabor Juhos
b4336a8e2d ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards 
SVN-Revision: 22882
 2010-09-03 18:14:37 +00:00
Felix Fietkau
523fcf0497 ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 
SVN-Revision: 22675
 2010-08-16 19:21:57 +00:00
Gabor Juhos
e35f7ef51d ar71xx: add eap7660d board to diag.sh and sysupgrade 
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22644
 2010-08-14 21:07:31 +00:00
Alexandros C. Couloumbis
9aef272f4a linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi) 
SVN-Revision: 22631
 2010-08-14 07:48:05 +00:00
Jo-Philipp Wich
6616951c15 add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch 
SVN-Revision: 22625
 2010-08-13 19:29:51 +00:00
Felix Fietkau
4ee3ae96c2 ar71xx: fix sysupgrade on the ubnt nanostation m 
SVN-Revision: 22370
 2010-07-23 18:16:47 +00:00
Felix Fietkau
900aaa919b ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values) 
SVN-Revision: 22353
 2010-07-22 12:37:44 +00:00
Jo-Philipp Wich
d6d8014cfd fix dir-825-b1 default network config after r21905 
SVN-Revision: 22005
 2010-07-01 00:03:43 +00:00
Gabor Juhos
e827a12c48 ar71xx: don't use vlan 0 for devices with rtl8366s switch 
SVN-Revision: 21905
 2010-06-26 19:15:32 +00:00
Gabor Juhos
7bff9c0101 ar71xx: add support for the Senao EAP7660D board 
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 21837
 2010-06-18 16:22:05 +00:00
Gabor Juhos
518f43efd8 ar71xx: fix RB750 LED configuration 
Patch-by: Ray Bellis

SVN-Revision: 21826
 2010-06-17 09:24:26 +00:00
Gabor Juhos
b86e4e1c6a ar71xx: add default network config for the RB433UAH board 
SVN-Revision: 21765
 2010-06-12 13:20:41 +00:00
Gabor Juhos
3045632eb0 ar71xx: add default network configuration file for the RB450/RB433 boards 
SVN-Revision: 21730
 2010-06-08 20:19:23 +00:00
Daniel Dickinson
6bccc41f6c ar71xx: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced 
SVN-Revision: 21634
 2010-05-30 03:20:49 +00:00
Gabor Juhos
65dba323f7 ar71xx: Make wget2nand fail if copying the kernel fails and use the correct file extension for the rootfs image 
wget2nand didnt check the exit status after copying the kernel, if the
copying failed for some reason ( for example not enougs space on the
kernel partition) it simply continued extracting the rootfs.
I also changed the filename, which wget2nand trys to download (
.tar.gz instead of .tgz ).

Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com>

SVN-Revision: 21444
 2010-05-14 08:38:39 +00:00
Gabor Juhos
d6c0363884 ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards 
Cc: backfire@openwrt.org

SVN-Revision: 20752
 2010-04-09 08:40:09 +00:00
Jo-Philipp Wich
23bebe33a7 Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. 
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.

SVN-Revision: 20722
 2010-04-05 23:03:16 +00:00
Gabor Juhos
8701291f0f ar71xx: add uci defaults to fix trx header on the WRT160NL boards 
* patch by Otto Solares

SVN-Revision: 20526
 2010-03-27 17:38:40 +00:00
Gabor Juhos
35bb7be34d ar71xx: Add basic WLAN LED control to TL-WR1043ND 
* thanks to KillaB
  * closes #6834

SVN-Revision: 20415
 2010-03-25 07:31:17 +00:00
Gabor Juhos
0095ab73f3 ar71xx: fix defconfig script to work with ImageBuilder 
* patch from #5722

SVN-Revision: 20231
 2010-03-15 13:29:16 +00:00
Gabor Juhos
ed3aca86a6 ar71xx: don't break the existing network configuration in the wget2nand script 
SVN-Revision: 20228
 2010-03-15 11:03:33 +00:00
Gabor Juhos
9daf566ddc ar71xx: fix sysupgrade on the LS-SR71 board 
SVN-Revision: 20119
 2010-03-10 17:41:45 +00:00
Gabor Juhos
eaccbd3fb8 ar71xx: add default network configuration for the PB44 board 
SVN-Revision: 20099
 2010-03-09 18:05:58 +00:00
Gabor Juhos
18ee1b6dda ar71xx: add uci-defaults for the RB750 board 
SVN-Revision: 20097
 2010-03-09 18:05:51 +00:00
Gabor Juhos
b21308313e ar71xx: override lan port names on the RB750 
SVN-Revision: 20096
 2010-03-09 18:05:48 +00:00
Gabor Juhos
781c482e6a ar71xx: improve wget2nand script 
SVN-Revision: 20094
 2010-03-09 18:05:42 +00:00
Gabor Juhos
4d5a9fe402 ar71xx: add missing protocol definitions to default network configurations 
SVN-Revision: 20091
 2010-03-09 18:05:31 +00:00
Gabor Juhos
5e8c8818ed ar71xx: add preliminary support for the RouterBOARD 750 
SVN-Revision: 20029
 2010-03-07 05:41:01 +00:00
Gabor Juhos
52f03512dc ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin) 
* closes #6782

SVN-Revision: 20006
 2010-03-05 20:29:27 +00:00
Gabor Juhos
7bda582cf7 ar71xx: fix status led detection on the RB4xx boards 
SVN-Revision: 20005
 2010-03-05 20:29:24 +00:00
Gabor Juhos
e1bb4af48b ar71xx: add default network configuration file for the TL-WR741ND board 
SVN-Revision: 19930
 2010-03-01 07:34:48 +00:00
Gabor Juhos
3f7d3dc939 ar71xx: add default network configuration file for the DIR-600 rev. A1 board 
SVN-Revision: 19929
 2010-03-01 07:34:46 +00:00
Gabor Juhos
a6be62a4f1 ar71xx: add default network configuration file for the TL-WR1043ND board 
Thanks to Andrew Tarabaras.

SVN-Revision: 19840
 2010-02-24 13:39:20 +00:00
Gabor Juhos
187d5546db ar71xx: use the correct name for the status LED on the WRT400 board (thanks to chuljin, patch from #6734) 
SVN-Revision: 19831
 2010-02-24 13:38:37 +00:00
Gabor Juhos
560f7173b2 ar71xx: update default network configuration file for the WNDR3700 
Signed-off-by: Scott Dudley <spmsink@hotmail.com>

SVN-Revision: 19830
 2010-02-24 13:38:31 +00:00
Gabor Juhos
47990f61fb ar71xx: add uci configuration for the WAN LED on the WNDR3700 
Based on a patch by Scott Dudley <spmsink@hotmail.com>

SVN-Revision: 19746
 2010-02-19 11:52:25 +00:00
Felix Fietkau
0e84ed29ea preinit: fix mixup between led and reset button enable on some platforms (thx, cshore) 
SVN-Revision: 19370
 2010-01-28 19:28:02 +00:00
Felix Fietkau
56bc02a305 add preinit modularization work by Daniel Dickinson (cshore) 
SVN-Revision: 19331
 2010-01-25 17:11:17 +00:00
Gabor Juhos
2b5ba9073f rtl8366_smi: move RTL8366S driver into a separate file 
SVN-Revision: 19279
 2010-01-22 17:38:07 +00:00
Gabor Juhos
b9328f2e04 ar71xx: change failsafe message 
SVN-Revision: 19221
 2010-01-18 09:15:35 +00:00
Gabor Juhos
a9c5e3159f ar71xx: update default network configuration for the WNDR3700/DIR-825-B1 
Also drop the default network configuration of the TL-WR1043ND, because
the RTL8366RB switch is not yet supported by the rtl8366-smi driver.

SVN-Revision: 19217
 2010-01-18 09:01:47 +00:00
Felix Fietkau
a86a28841c ar71xx: add some default configs for rtl8366 based devices 
SVN-Revision: 19210
 2010-01-18 00:44:52 +00:00
Felix Fietkau
3cc98b09f7 adjust switch default configs for the swconfig api change 
SVN-Revision: 19209
 2010-01-18 00:38:08 +00:00
Gabor Juhos
21a235bc67 ar71xx: fix typos in the ar71xx.sh 
SVN-Revision: 19151
 2010-01-15 12:11:05 +00:00
Gabor Juhos
cb80426641 ar71xx: add preliminary support for the Buffalo WZR-HP-G300NH 
SVN-Revision: 19150
 2010-01-15 12:08:03 +00:00
Gabor Juhos
58301cdeb8 ar71xx: add support for the D-Link DIR-600 rev. A1 board 
SVN-Revision: 19100
 2010-01-11 08:02:10 +00:00
Gabor Juhos
ac4b63a18b ar71xx: create firmware images for the AP81/PB42/PB44 boards 
SVN-Revision: 19011
 2010-01-02 16:30:52 +00:00
Gabor Juhos
cace9f4566 ar71xx: add support for the TL-WR841N v1.5 board 
SVN-Revision: 18893
 2009-12-22 19:31:28 +00:00
Gabor Juhos
1f114b0dbd ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on the patch from #6186) 
SVN-Revision: 18818
 2009-12-18 12:57:01 +00:00
Gabor Juhos
8bc4e3ea14 ar71xx: enable diagnostic LED on the Routerstation Pro 
SVN-Revision: 18782
 2009-12-15 08:35:11 +00:00
Jo-Philipp Wich
e0042b55ea fix default network config after r18699 
SVN-Revision: 18708
 2009-12-08 22:22:16 +00:00
Felix Fietkau
ddc2e2270b ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection (#6309) 
SVN-Revision: 18699
 2009-12-08 14:06:18 +00:00
Gabor Juhos
7d8a1bf239 ar71xx: TL-WR1043ND support cleanup 
SVN-Revision: 18697
 2009-12-08 12:46:30 +00:00
Gabor Juhos
f065bbdf7f ar71xx: DIR-825 support cleanup 
SVN-Revision: 18622
 2009-12-03 15:07:41 +00:00
Gabor Juhos
e4d21e0399 ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater) 
SVN-Revision: 18621
 2009-12-03 15:07:34 +00:00
Gabor Juhos
bd4bec689d ar71xx: create sysupgrade image for the WNDR3700 
SVN-Revision: 18570
 2009-11-28 08:25:56 +00:00
Gabor Juhos
ac8369a672 ar71xx: fix a typo in ar71xx.sh 
SVN-Revision: 18568
 2009-11-28 08:25:49 +00:00
Gabor Juhos
536a4ce5b9 ar71xx: add default network configuration file for the WNDR3700 
SVN-Revision: 18566
 2009-11-27 21:21:24 +00:00
Gabor Juhos
4704478682 ar71xx: add sysupgrade support for Ubiquiti XM boards 
SVN-Revision: 18533
 2009-11-25 09:51:31 +00:00
Gabor Juhos
bc97b5de8b ar71xx: enable failsafe on the Nanostation M/Rocket M 
SVN-Revision: 18532
 2009-11-25 09:51:28 +00:00
Gabor Juhos
523aba9ff9 ar71xx: create combined images for the RS, RS-PRO and LS-SR71 boards, and add sysupgrade support for them 
SVN-Revision: 18531
 2009-11-25 09:51:25 +00:00
Gabor Juhos
a12a03de8d ar71xx: register LEDs and buttons on the WNDR3700 
Thanks to aorlinks (https://forum.openwrt.org/viewtopic.php?pid=97415#p97415)

SVN-Revision: 18435
 2009-11-16 17:31:25 +00:00
Gabor Juhos
5ab66428b0 ar71xx: add preliminary support for the Netgear WNDR3700 
Based on patches by Marco Porsch from:
https://forum.openwrt.org/viewtopic.php?id=22311

SVN-Revision: 18411
 2009-11-13 17:11:29 +00:00
Gabor Juhos
28e212cc40 ar71xx: add default network configuration for RS and RS-Pro 
SVN-Revision: 18103
 2009-10-20 19:36:47 +00:00
Gabor Juhos
a525c056d5 ar71xx: add default network configuration file for the WP543 board 
SVN-Revision: 18101
 2009-10-20 12:59:45 +00:00
Felix Fietkau
abffbb5da7 add a defconfig for wrt160nl which contains switch settings 
SVN-Revision: 17826
 2009-10-02 21:07:12 +00:00
Gabor Juhos
4a99a9b7e3 ar71xx: use 'link4' LED for diagnostic on Bullet M 
SVN-Revision: 17813
 2009-10-01 19:41:13 +00:00
Gabor Juhos
dd3b2ae8af ar71xx: add default network configuration for the Bullet M 
SVN-Revision: 17810
 2009-10-01 19:41:06 +00:00
Gabor Juhos
b6ce09fea4 ar71xx: use WPS led for diagnostic on WRT160NL 
SVN-Revision: 17518
 2009-09-05 18:46:43 +00:00
Gabor Juhos
0b869ee143 preliminary failsafe support (closes #5726) 
SVN-Revision: 17321
 2009-08-19 20:16:01 +00:00
Gabor Juhos
39b7814f25 add diag script (closes #5725) 
SVN-Revision: 17320
 2009-08-19 19:26:53 +00:00
Gabor Juhos
a59d59be79 enable sysupgrade on the WRT160Nl 
SVN-Revision: 17202
 2009-08-09 14:12:24 +00:00
Gabor Juhos
304fbfa841 init mac address on the WRT160NL board (thanks to Gerry Rozema for testing) 
SVN-Revision: 17124
 2009-08-04 17:45:00 +00:00
Gabor Juhos
bfd20cb57d init mac address on the TEW-632BRP boards (closes #5403) 
SVN-Revision: 17100
 2009-08-03 07:48:21 +00:00
Gabor Juhos
9d1e01a159 fix sysupgrade 
SVN-Revision: 17092
 2009-08-02 09:27:38 +00:00
Gabor Juhos
5f2d2695d9 enable sysupgrade support for the TL-WR741ND 
SVN-Revision: 16982
 2009-07-25 19:50:26 +00:00
Gabor Juhos
227e69c0f4 add experimental sysupgrade support 
SVN-Revision: 16364
 2009-06-06 17:44:49 +00:00
Gabor Juhos
656f86f810 add default network configuration for the AP83 board 
SVN-Revision: 16360
 2009-06-06 16:01:09 +00:00
Gabor Juhos
f3c3e2772f improve MZK-W300NH support (thanks to Kazuki Shimada for the board) 
SVN-Revision: 16340
 2009-06-04 18:18:36 +00:00
Gabor Juhos
f6e6a733f5 add preliminary support for the WRT160NL 
SVN-Revision: 16068
 2009-05-25 18:36:49 +00:00
Gabor Juhos
7807c1a29f add experimental support for the Atheros PB44 board 
SVN-Revision: 15928
 2009-05-20 08:23:48 +00:00
Gabor Juhos
aab2d9371b add experimental support for the Linksys WRT400N board (thanks to netprince) 
SVN-Revision: 15422
 2009-04-26 06:40:02 +00:00
Gabor Juhos
ef537a68da ap81: register ethernet devices, and add default network configuration file 
SVN-Revision: 14921
 2009-03-17 18:07:16 +00:00
Gabor Juhos
fa36af494f pb42: fix ethernet, remove USB registration, add default network configuration 
SVN-Revision: 14876
 2009-03-14 18:28:33 +00:00
Gabor Juhos
ceb3b8c837 tew-632brp: add default network configuration 
SVN-Revision: 14830
 2009-03-10 08:14:26 +00:00
Gabor Juhos
dfd746cd47 add default network configuration for the RB-411 board 
SVN-Revision: 14695
 2009-02-28 18:55:46 +00:00
Gabor Juhos
80afab21fc add default network configuration for the AW-NR580 
SVN-Revision: 14688
 2009-02-27 20:49:51 +00:00
Andy Boyett
1adf135943 wnr2000: enable ar8216 workaround, add network config. LAN ports now work 
SVN-Revision: 14663
 2009-02-26 05:54:32 +00:00
Andy Boyett
f88c482dea defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci 
SVN-Revision: 14662
 2009-02-26 05:54:07 +00:00
Gabor Juhos
8e0e4cb3d8 mzk-w04nu: enable the ar8216 chip workaround, and add a default network configuration file 
SVN-Revision: 14656
 2009-02-25 16:48:56 +00:00
Gabor Juhos
9da4abfe58 add default network configuration for the TL-WR941ND board 
SVN-Revision: 14654
 2009-02-24 18:19:02 +00:00
Gabor Juhos
9be9eb8ab1 add more base-files 
SVN-Revision: 14653
 2009-02-24 18:16:40 +00:00
Gabor Juhos
45a4ac68a8 add wget2nand script 
SVN-Revision: 12263
 2008-08-10 09:20:55 +00:00