Commit graph

38744 commits

Author SHA1 Message Date
Jo-Philipp Wich
66f25c98e0 ar71xx: disable ENS202EXT in mikrotik and nand subtargets
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-31 02:40:47 +02:00
Luiz Angelo Daros de Luca
b4f463d969 openvpn-easy-rsa: update to 3.0.1
easy-rsa v3 is now a single script. It expects a 'vars'
configuration file which path can be set using easy-rsa
options, environment variables or just looking in the
current directory.

The default usage would be:

 # cd /etc/easy-rsa
 # easy-rsa COMMAND [command-options]

Following upstream changes, /etc/easy-rsa/pki replaces
/etc/easy-rsa/keys directory.

The default /etc/easy-rsa/pki dir is marked to be kept during
upgrade (WARN: priv keys are saved in the system backup)
/etc/easy-rsa/openssl.1.0.cnf is now marked as config file while
index and serial got removed.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2017-05-31 00:28:26 +02:00
Felix Fietkau
09c2f4a176 mt76: update mirror hash after tar portablity fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-30 15:40:51 +02:00
Felix Fietkau
e25cedd0b5 tar: override symlink permissions
On Linux, symlink permissions cannot be altered and are always 0777.
On Mac OS X they can be 0755. Force 0777 here to keep tarballs
reproducible across systems

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-30 15:40:51 +02:00
Piotr Dymacz
6173f6d8f1 ar71xx: move Wallys DR344 to generic build target
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-30 14:34:09 +02:00
Piotr Dymacz
18d5cee2a8 ar71xx: fix Wallys DR344 GPIO-connected LEDs and button
This fixes wrong GPIO numbers for LEDs and button in Wallys DR344 board
and sets color of all LEDs to green as the mass production boards have
only green one.

Actually, DR344 has 6 GPIO-connected LEDs and one button:

- GPIO11: status
- GPIO12: sig1
- GPIO13: sig2
- GPIO14: sig3
- GPIO15: sig4
- GPIO16: reset button
- GPIO17: lan

WAN LED is connected directly with AR8035 PHY.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-30 14:34:04 +02:00
Piotr Dymacz
6713640b52 ar71xx: set GE interface as wan by default in Wallys DR344
This aligns default network interfaces configuration with vendor
firmware: GE (eth0) -> wan, FE (eth1) -> lan.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-30 14:15:25 +02:00
Piotr Dymacz
c7bc8a9a13 ar71xx: fix GE interface support in Wallys DR344
GMAC0 interface of AR9344 SOC in Wallys DR344 board is connected with
AR8035, not with AR8327. Without this fix, GE interface doesn't work at
all or shows high packet loss ratio.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-30 14:15:25 +02:00
Marty Plummer
558d86923e ar71xx: add support for EnGenius ENS202EXT
EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.

The device is based on Qualcomm/Atheros AR9341 v1.

Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button

Flash instructions:

You have three options:

- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.

- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.

- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:

*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
      stat -- Status
       sys -- System
    wless2 -- 2.4G-Wireless
      mgmt -- Management
      tree -- Tree
      help -- Help
    reboot -- Reboot
ens202ext>mgmt
  Management
---========= Commands Help =========---
     admin -- Administration
     mvlan -- Management VLAN settings
      snmp -- SNMP settings
    backup -- Backup/Restore settings
    autorb -- Auto reboot settings
   fwgrade -- Firmware upgrade
      time -- Time settings
   wifisch -- Wifi schedule
       log -- Log
      diag -- Diagnostics
      disc -- Device Discovery
    logout -- Logout
      help -- Help
      exit -- Exit
ens202ext/mgmt>fwgrade
  Management --> Firmware upgrade
---========= Commands Help =========---
      fwup -- Firmware upgrade
      help -- Help
      exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin

Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
2017-05-30 14:15:25 +02:00
Andrey Polischuk
0f21873f7f ar71xx: fix LED defines for TP-Link TL-WR740N v6
Signed-off-by: Andrey Polischuk <androld.b@gmail.com>
[changed commit subject, dropped redundant kernel config symbol]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-30 14:15:25 +02:00
Kevin Darbyshire-Bryant
a4198f8c8d iproute2: bump to 4.11
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-05-30 14:00:31 +02:00
Daniel Engberg
6af0facb4e toolchain/binutils: Set 2.28 as default version
Use 2.28 by default

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-30 14:00:31 +02:00
Josua Mayer
d41a441bb6 mvebu: clearfog: assign SFP port to WAN zone
The single SFP port is meant for direct media access to WAN, such as
VDSL2, GPON). While it could also be used for in-home fiber, it is much
more likely that the LAN is standard ethernet, especially considering
that SFP is the onmly port that can go beyond 1Gbps.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:31 +02:00
Josua Mayer
48cc065fe3 mvebu: clearfog: document interface configuration
Take explicit note of what physical ports eth{0,1,2} refer to.
Also repair port assignment:
At some point between 4.9.20 and 4.9.29 the numbering changed.
Keep previous port assignment that was:
LAN = SFP+Switch
WAN = standalone ethernet

Also use the same assignment for Clearfog-Base to avoid confusion.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
3f72f3a8b1 mvebu: clearfog: include DTB for all variants in image
Installing all armada-388-clearfog-* DTBs in the same sdcard image,
it now becomes much easier to swap sdcards between different device variants.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
88389bfe41 mvebu: update boot-script to use generic variables
U-Boot provides standard variables for load addresses, and
filesystem-agnostic load-commands. Furthermore thanks to distro-boot,
the device and partition from which the system boots is known.
The new boot-script makes use of all this information.

Tested on the only board that uses this boot-script: Clearfog Pro

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
e2814f6416 u-boot-mvebu: clearfog: enable setexpr command
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
c4f9474059 u-boot-mvebu: clearfog: implement distro-boot
Add a patchfile that implements distro-boot and is meant to go upstream
Also make the other patches git-am'able for easier maintenance.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
86c4144571 u-boot-mvebu: update to 2017.03
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Ansuel Smith
e783f588eb mwlwifi: update to the latest version
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2017-05-30 13:59:38 +02:00
Syrone Wong
c87aa0d7ca toolchain/gcc: fix --with-isl path
This fixes GCC 7 compilation when GRAPHITE is selected.
The path is replaced with $(TOOLCHAIN_DIR), while it should be
$(STAGING_DIR_HOST). To keep in sync with the path of gmp,
mpfr and mpc, I'm using $(TOPDIR)/staging_dir/host.

Fixes: f62f4b3c5c ("build: stop overriding STAGING_DIR_HOST for toolchain build")

Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2017-05-30 09:32:10 +02:00
Felix Fietkau
6773561748 mt76: update to the latest version, fixes a mt7603 beacon issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-30 08:52:00 +02:00
Matthias Schiffer
df5e80eb26
procd: update to latest git HEAD
e7bb2c8 upgraded: define __GNU_SOURCE

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-30 07:29:25 +02:00
Matthias Schiffer
ce06d2bd01
sunxi: sysupgrade: sync with x86
sunxi sysupgrade was based on the x86 implementation; sync fixes and other
changes from the current x86 version:

x86: fix sysupgrades on disks with 4k block size
x86: sysupgrade: move partition table change check to platform_check_image
x86: sysupgrade: refactor platform_do_upgrade
x86: sysupgrade: explicitly rescan disk after writing partition table

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:35 +02:00
Matthias Schiffer
6bb7b87315
sunxi: sysupgrade: don't write partitions twice
When existing partitions are retained, the dd call writing the uboot image
in the space before the first partition was accidentally writing the whole
image, making the code for individual partitions redundant. Limit the copy
to 1016KiB (the first 8KiB are skipped, and the first partition starts at
1024KiB).

In addition, conv=notrunc is replaced with conv=fsync. It seems this was an
oversight, as notrunc doesn't make sense for block devices and all other dd
commands use conv=fsync.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Matthias Schiffer
dac07ca05b
x86: sysupgrade: explicitly rescan disk after writing partition table
This should ensure that the kernel partition can be mounted in
platform_copy_config when its size has changed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Matthias Schiffer
a77633d36d
x86: sysupgrade: refactor platform_do_upgrade
By returning early when no upgrade device can be found and handling the
SAVE_PARTITIONS=0 case differently, we can get rid of two levels of if.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Matthias Schiffer
19b84cfff2
x86: sysupgrade: move partition table change check to platform_check_image
The staged sysupgrade will prevent us from using ask_bool in
platform_do_upgrade; therefore, the check is moved to platform_check_image.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:34 +02:00
Matthias Schiffer
9ab81e63cd
ramips: sysupgrade: move nand_do_upgrade call to platform_do_upgrade
All targets with NAND support should gradually move their nand_do_upgrade
calls from platform_pre_upgrade to platform_do_upgrade.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:33 +02:00
Matthias Schiffer
a5428244d9
base-files: add support for staged sysupgrades from failsafe mode
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:33 +02:00
Matthias Schiffer
b2adb9a7b5
base-files: sysupgrade cleanup
Some functions only used by stage2 are moved there from common.sh.

One piece that could still use more cleanup is platform_pre_upgrade: many
targets reference files from there are aren't available in the ramfs, so
we need to evaluate it before the switch; conversely, flash writes happen
in that function on some targets. Targets that do the latter should be
fixed eventually to use platform_do_upgrade for that purpose.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:33 +02:00
Matthias Schiffer
218af1957e
fstools: snapshot: handle jffs2 conversion using upgraded
We can reuse the kill_remaining and run_ramfs facilities of the stage2 run
by upgraded.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:33 +02:00
Matthias Schiffer
6bbb3a2b0a
fstools: clean up trailing whitespace in snapshot script
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:33 +02:00
Matthias Schiffer
30f61a34b4
base-files: always use staged sysupgrade
Support for the -d and -p options is dropped; it may be added again at some
point by adding these flags to the ubus sysupgrade call.

A downside of this is that we get a lot less information about the progress
of the upgrade: as soon as the actual upgrade starts, all shell sessions
are killed to allow unmounting the root filesystem.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:32 +02:00
Matthias Schiffer
393817df5d
procd: remove procd-nand package
We always want to support staged upgrades now, so it's better to include
upgraded into the main package. /lib/upgrade/nand.sh is moved to
base-files.

The procd-nand-firstboot package is removed for now, it may return later
as a separate package.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:50:32 +02:00
Matthias Schiffer
8008765f1f
procd: update to latest git HEAD
992b796 rcS: add missing fcntl.h include
63789e5 init: add support for sysupgrades triggered from preinit
5b1fb35 Remove code that has become unnecessary after sysupgrade changes
5918b6d upgraded: add support for passing a "command" argument to stage2
056d8dd upgraded: link dynamically, chroot during exec
7c6cf55 system: always support staged sysupgrade
d42b21e procd/rcS: Use /dev/null as stdin
e0098d4 service/instance: add an auto start option
1247db1 procd: Log initscript output prefixed with script name
8d720b2 procd: Don't use syslog before its initialization
2555474 procd: Add missing \n in debug message

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:49:50 +02:00
Matthias Schiffer
49328cecdf
procd: prepare NAND sysupgrade for making upgraded dynamically linked
Use install_bin to copy upgraded with all dependencies. The old name
/tmp/upgraded is temporarily retained as a symlink to avoid breaking
things.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:08:32 +02:00
Matthias Schiffer
25d1a24e58
procd: clean up trailing whitespace in nand.sh
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-29 23:08:22 +02:00
Felix Fietkau
aaeb42b3e2 mt76: update to the latest version, improves mt7603/7628 stability
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-29 14:42:49 +02:00
Felix Fietkau
1a341e89a7 build: fix kmod package build on non-GNU systems
BSD paste requires a filename argument, and it accepts - to use stdin as
intended.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-29 14:27:08 +02:00
Daniel Engberg
9235a29e1a tools/sparse: Update to snapshot 2017-03-31
Update sparse to snapshot 2017-03-31
Switch to HTTPS

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-29 10:00:43 +02:00
Daniel Engberg
2cf4e3c420 toolchain/insight: Remove from tree
Insight hasn't been touched since 2009 and I can't find any references at
least 6 years back of being used. Ubuntu and Debian removed insight years ago
from their repos so I think we can safely remove this too.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-29 09:57:18 +02:00
Martin Schiller
82f7fd7457 lantiq: pinctrl: xway: fix copy/paste error in xrx200_grps
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-05-29 09:51:19 +02:00
Ram Chandra Jangir
7bf74d3185 ipq806x: add qpic nand and bam dma node's in ipq4019 dts tree
This change adds QPIC BAM dma and NAND driver node's in IPQ4019
device tree, also enable this for AP-DK04.1 based boards.

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
2017-05-29 07:26:03 +02:00
Ram Chandra Jangir
35307c0bbf ipq806x: Add support for custom data mapping in bam_dma dmaengine
This change adds a new function to support for preparing DMA descriptor
for custom data.

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
2017-05-29 07:25:59 +02:00
Ram Chandra Jangir
ea9e0cf2ce ipq806x: Added bam transaction and support additional CSRs
This change adds support for below:
- Bam transaction which will be used for any NAND request.
- Reset function for NAND BAM transaction
- Add support for additional CSRs.

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
2017-05-29 07:25:54 +02:00
Ram Chandra Jangir
2048cab22b ipq806x: Add bam_dma support in qcom_nand driver
The existing qcom_nand driver supports ADM DMA which is mainly
required for ipq806x family based boards,
IPQ40xx based boards uses BAM DMA in NAND driver, so this patch
adds BAM DMA support with compatible string as qcom,ebi2-nandc-bam.

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
2017-05-29 07:25:46 +02:00
Ram Chandra Jangir
d227bb06df ipq806x: Add support to configure ipq40xx GPIO_PULL bits
GPIO_PULL bits configurations in TLMM_GPIO_CFG register
differs for IPQ40xx from rest of the other qcom SoC's.
This change add support to configure the msm_gpio_pull
bits for ipq40xx, It is required to fix the proper
configurations of gpio-pull bits for nand pins mux.

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
2017-05-29 07:25:39 +02:00
Jo-Philipp Wich
61eb18d3f7 firewall: fix stray continue statement
The previous commit introduced a faulty continue statement which might
lead to faulty rules not getting freed or reported.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-27 16:16:15 +02:00
Hans Dedecker
1422dab66e netifd: fix 6rd regression (FS#812)
08f1875 system-linux: fix 6rd regression

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-05-27 13:26:39 +02:00