Commit graph

37507 commits

Author SHA1 Message Date
Vitaly Chekryzhev
65985e9ace ramips: ZyXEL Keenetic Omni align factory images
ZyXEL web-flasher requires squashfs to be aligned to 64kb.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-20 00:39:30 +01:00
Vitaly Chekryzhev
f9d91a4ac7 ramips: correct keenetic-series switch index
Fix switch name typo

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-20 00:39:30 +01:00
Svetoslav Neykov
97b52593bc ar71xx: Chipidea USB device support
Changes the platform to use the Chipidea driver instead of the
generic USB host driver which has support for both host and
device modes (selected on boot).

The changes in 930-chipidea-pullup.patch are already in mainline.
I'll upstream 920-usb-chipidea-AR933x-platform-support.patch once I
can test the changes with a newer kernel.

Signed-off-by: Svetoslav Neykov <svetoslav@neykov.name>
2017-01-20 00:37:01 +01:00
Jiri Kastner
cf79e393f9 octeon: fix mtd partitions for erlite on cmdline
erlite mtdparts exposes boot0, boot1 and eeprom regions
as read/write.
this patch adds readonly flags, so these regions can't be
modified. same as it is already for ER profile.

Signed-off-by: Jiri Kastner <cz172638@gmail.com>
2017-01-20 00:35:46 +01:00
Jo-Philipp Wich
ada6d9feca sdk: avoid using private repository clone urls as base repo entry
Only consider the repository origin url as valid base feed entry if it is a
git://, http:// or https:// location.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-19 20:46:58 +01:00
Felix Fietkau
254ccf9f4c lantiq: fix an ethernet stability issue triggered by receving packets during boot
Disabling ethernet during reboot (only to enable it again when the
ethernet driver attaches) can put the chip into a faulty state where it
corrupts the header of all incoming packets.

This happens if packets arrive during the time window where the core is
disabled, and it can be easily reproduced by rebooting while sending a
flood ping to the broadcast address.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-19 14:25:44 +01:00
Felix Fietkau
5aa03e16a7 build: disable CONFIG_AUTOREMOVE for packages/tools where QUILT is used
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-19 13:30:22 +01:00
Felix Fietkau
bc73a7fd98 build: include CONFIG_AUTOREMOVE in HOST_STAMP_PREPARED
Fixes build issues when changing the CONFIG_AUTOREMOVE setting

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-19 13:04:30 +01:00
Felix Fietkau
24c06e2481 lantiq: fix spurious irq storm
Since the MIPS IRQ stack patches, lantiq devices were emitting a storm
of messages like this:

[  567.872172] Spurious IRQ: CAUSE=0x1100c300

Fix this by reworking the IRQ dispatch code

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-19 12:33:15 +01:00
Felix Fietkau
86a72765b9 build: include CONFIG_AUTOREMOVE in STAMP_PREPARED
Fixes build issues when changing the CONFIG_AUTOREMOVE setting

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-19 11:37:19 +01:00
Jo-Philipp Wich
1fb673ee12 build: fix triggering opkg/host compilation
Commit 131db36 "build: remove separate /install step for host builds" dropped
the package/*/host/install targets in favor to performing the install steps
within the compile target instead.

Adjust package/Makefile accordingly in order to prevent a missing
staging_dir/host/bin/opkg when staging package archives into the rootfs.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-19 02:44:08 +01:00
Matthias Schiffer
421a6d314a
gettext-full: fix to use $STAGING_DIR_HOSTPKG instead of $STAGING_DIR/host
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-19 00:05:10 +01:00
Matthias Schiffer
40d3401f3b
rules.mk: export STAGING_DIR_HOSTPKG
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-19 00:05:10 +01:00
Felix Fietkau
d98bb7e6b9 build: extend CONFIG_AUTOREMOVE to tools/
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:09 +01:00
Felix Fietkau
131db366a3 build: remove separate /install step for host builds
Reduces the number of recursive make invocations

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:09 +01:00
Felix Fietkau
7a523569f7 build: add support for automatically removing build dir contents during build
This is used to save space on buildbot instances.
If any part of a package needs to be rebuild, the whole package is
rebuilt from scratch. Stamp files are preserved to allow dependency
checks to work

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:08 +01:00
Felix Fietkau
c150a190f5 build: stage bin/ packages inside PKG_BUILD_DIR
This makes the build slightly more efficient by avoiding the need to
re-stage packages on every full build run.

It is also necessary for the upcoming CONFIG_AUTOREMOVE feature

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:08 +01:00
Felix Fietkau
87d9e3462d build: stage unstripped packages inside PKG_BUILD_DIR
This makes the build slightly more efficient by avoiding the need to
re-stage packages on every full build run.

It is also necessary for the upcoming CONFIG_AUTOREMOVE feature

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:08 +01:00
Felix Fietkau
8aa93dafc8 build: write ABI_VERSION file when staging the package
The make target does not rewrite the file if the contents didn't
change. This causes make to always consider the target old.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:08 +01:00
Felix Fietkau
9228d1c066 build: introduce extra targets that contain only proper dependencies
This can be used to check if targets like prepare or compile are up to date

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:08 +01:00
Felix Fietkau
6cf067d084 build: define common subdir targets in rules.mk
Reduce build system clutter and enable further rework

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:07 +01:00
Mirko Vogt
c99f881568 git-kernel: $(SUBDIR) should always be $(LINUX_VERSION)
Before SUBDIR was set to $(PATCHVER) which may
or may not include the minor version number of
the linux kernel version. Usually it doesn't.

So the git-clone'd linux kernel was packed without
the minor version number taken into account, which
broke further processing, as it expected the
extracted dir being named linux-$(LINUX_VERSION)
(=with minor version) rather than linux-$(PATCHVER)
(=without minor version).

Changing SUBDIR to $(LINUX_VERSION) creates
consistent behaviour here.

Signed-off-by: Mirko Vogt <mirko-openwrt@nanl.de>
2017-01-18 21:03:26 +01:00
Matthias Schiffer
3d71786154
build: move STAGING_DIR_HOSTPKG and BUILD_DIR_HOST back to a common directory for all targets
Using a single host package staging dir (and build dir) significantly speeds up
builds when multiple targets are built in succession, especially for large host
packages like NodeJS.

$(STAGING_DIR)/host is kept in addition to $(STAGING_DIR_HOSTPKG) in most
places; it is still used as destination for host files in Build/InstallDev.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-18 19:47:36 +01:00
Hans Dedecker
5f7a081553 base-files: add /etc/iproute2/rt_protos
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-01-18 13:15:28 +01:00
Thibaut VARENE
7fb11c8ed2 ramips: add support for Netgear WN3000RPv3
This patch adds support for the Netgear WN3000RPv3
http://www.netgear.com/support/product/wn3000rpv3.aspx

Specifications:
- SoC: MediaTek MT7620A (580MHz, ramips)
- RAM: 32MB DDR
- Storage: 8MB NOR SPI flash
- Wireless: builtin MT7620A, 2x2:2 with u.FL connectors
- Ethernet: 1x100M
- Serial: JP1 header, 57600-8N1
- Stock firmware based on OpenWRT Kamikaze

Like the EX2700, the bootloader expects a secondary image signature,
see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577
This is why the same fakeroot image is used for the WN3000

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-01-18 12:06:16 +01:00
Thibaut VARENE
29d0ac35bd ar71xx: mark soft_config mtd part as writeable for RB-941-2nD
The soft_config partition must be writeable for rbcfg to be able to
enact changes to the routerboot configuration.
The read-only flag was a mistake in the initial patch. Removing it
brings mach-rb941.c in line with all other RB platforms.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-01-18 12:05:43 +01:00
Zhang Jingye
71a39b8690 ipq806x: Fix wireless support for Netgear Nighthawk X4S D7800
D7800 has a simular hardware to R7800 and uses dual QCA9980 for both 2.4GHz and 5GHz band.
However there is no proper initialization for them, which causes a kernel panic due to failed firmware loading.

This patch adds d7800 to ath10k caldata extraction list.
I can get two functional wireless bands after making change to it.

Signed-off-by: Zhang Jingye <934526987@qq.com>
2017-01-18 12:05:18 +01:00
BangLang Huang
2a7f669016 ramips: fix mac address of miwifi-mini
For the miwifi-mini, the offset of ethernet mac should be 0x28
which you can easyily dump from 'Factory' partition.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-01-18 12:05:14 +01:00
Alexandru Ardelean
2b84dfafa4 tools/qemu: use default host configure rule ; set appropriate vars & args
Admittedly, this is my own OCD wanting to get rid of this.

Because I tried (a while back to upgrade QEMU to a newer version),
and (during that attempt) I tried to get rid of this.

Tested on Linux & Mac.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-01-18 08:54:58 +01:00
Joseph C. Lehner
6b5dab9469 ramips: simplify EX2700 network config
Don't create a vlan for the Netgear EX2700's only Ethernet port.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-18 08:54:58 +01:00
Rosen Penev
7967178cfc ramips: Add back sdhci-mt7620 driver to default config
The driver no longer causes kernel panics and CPU hangs.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-01-18 08:54:53 +01:00
Rafał Miłecki
b86a34efea bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-18 07:49:52 +01:00
Rafał Miłecki
9200e168f2 mac80211: move (& update) upstream accepted brcmfmac patches
These 3 patches are now in wireless-drivers-next tree.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-18 07:49:52 +01:00
Jo-Philipp Wich
a68b1b9c8a sdk: do not strip static libraries
Do not strip static libraries shipped with the SDK in order to preserve the
archive index. If we strip the index of the shipped libraries, host programs
will fail to link these libraries with errors like:

    libssl.a: error adding symbols: Archive has no index; run ranlib to add one

The error was found while investigating a Python host build failure within
the SDK environment.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-18 03:18:53 +01:00
Hans Dedecker
0d1b329914 netifd: update to git HEAD version
a057f6e device: fix DEV_OPT_SENDREDIRECTS definition

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-01-17 14:06:48 +01:00
Jo-Philipp Wich
5faad30d5d build: properly pass CPP and CXX flags in HOST_MAKE_VARS
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-17 09:30:13 +01:00
Alexandru Ardelean
e9d20f1f87 build: introduce default HOST_MAKE_VARS for host-builds
Inspired/adapted from `package-defaults.mk` MAKE_VARS.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-01-17 09:18:45 +01:00
Alexandru Ardelean
968fa53197 tools/cmake: remove HOST_CONFIGURE_CMD and re-distribute the args & vars
The final semantic is the same, but this is a bit more correct.

Build tested on Windows 10 (yes, there is some
Ubuntu mode for Windows 10, and I've been also building LEDE
on it for a few weeks).

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-01-16 20:40:14 +01:00
Chris Blake
0d9f922230 x86: add kernel module for sp5100_tco watchdog
This change adds the sp5100_tco driver as a kernel module for the x86
target. Specifically, this can be used by the PCEngines APU2/APU3. The
reason for having this as a kernel module is to allow users to
load/unload it on demand, as the I2C interface on the APU2/APU3 will not
work while this module is loaded. More info can be found on GitHub at
https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-16 20:40:13 +01:00
Chris Blake
4fab08183b x86: Add sp5100_tco AMD patches
This adds the following patches to the x86 target:

sp5100_tco: Add AMD Mullins platform support
sp5100_tco: Add AMD Carrizo platform support
sp5100_tco: fix the device check for SB800 and later chipsets
watchdog: sp5100_tco: properly check for new register layouts

With these added, the sp5100_tco driver can then be used on newer AMD
platforms, such as the PCEngines APU2/APU3 boards.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-16 20:40:13 +01:00
Felix Fietkau
371b382a40 x86: remove the xen_domu subtarget
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Felix Fietkau
1d6879eedd x86/generic: add xen DomU support
Copy the relevant config options from the xen_domu subtarget

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Felix Fietkau
00144d2730 ar71xx: fix up the kernel config for the mikrotik subtarget
Limit enabled devices to routerboards, disable all other devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Cezary Jackiewicz
05115e9656 ar71xx: fix network config for Mikrotik RB411U
Mikrotik RB411U has only one ethernet port - eth0. This patch allows to create
correct config with one lan section.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2017-01-16 20:40:12 +01:00
Thibaut VARENE
3f7841a70a ar71xx: add support for RB-941-2nD
Add full support for Mikrotik RB-941-2nD (hAP lite)

Original patch by Sergey Sergeev <adron@yapic.net> and
more information is available here:
https://wiki.openwrt.org/toh/mikrotik/rb941_2nd
I updated and adapted the patch to apply cleanly to LEDE trunk
and added proper numbering for the switch ports (matching case
labels).
Tested working on actual hardware with the information
provided in the above webpage. Sysupgrade works.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Felix Fietkau
8ab057f5e4 kernel: remove yaffs2 support, it is no longer needed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Felix Fietkau
21591a3361 adm5120: mark the rb1xx subtarget as broken
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Felix Fietkau
9db9072d67 ar71xx: convert mikrotik routerboard support to UBI
Remove the wget2nand script, drop the need for manual installation,
use sysupgrade instead.

There are now two different NAND images, one for 64 MiB flashes, the
other for >= 128 MiB

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Felix Fietkau
0e547400fb ar71xx: create a proper default profile for the mikrotik subtarget, drop other profiles
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:12 +01:00
Christian Lamparter
a8a5cb9595 musl: update musl to 1.1.16+ and switch to download from git
This patch updates musl to 1.1.16+ [0] and removes all the
backported patches. This is a major release and tagged as such.
For more information visit musl-libc.org or read the WHATSNEW.

Furthermore, this patch also changes musl to download directly
from git. This makes it easier to update musl in the future.

The patch custom Add-format-attribute-to-some-function-declarations.patch
was assigned a new 400- number. This should avoid confusion
since 0xx numbers are usually assigned to backports.

[0] <http://git.musl-libc.org/cgit/musl/commit/?id=769f53598e781ffc89191520f3f8a93cb58db91f>

Cc: Hannu Nyman <hannu.nyman@iki.fi>
Cc: Koen Vandeputte <koen.vandeputte@ncentric.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2017-01-16 20:40:00 +01:00