Commit graph

142 commits

Author SHA1 Message Date
Luka Perkov
81db848656 targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
2015-02-07 19:58:58 +00:00
Luka Perkov
92e6e80080 targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
2015-02-07 19:58:52 +00:00
Imre Kaloz
865647cea2 mvebu: add note about the move to single firmware files
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44291
2015-02-06 11:18:59 +00:00
Imre Kaloz
eda08dd423 mvebu: support building images for a single board
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44290
2015-02-06 11:16:20 +00:00
Imre Kaloz
12531a0f86 mvebu: don't generate targz images by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44268
2015-02-05 16:31:52 +00:00
Imre Kaloz
66e35c5246 mvebu: Enable the A385 AP on 3.19
In order for the image to be built, some patches need to be ported to 3.19.

Add the relevant patches. Note that most of them (if not all) should be merged
in 3.20, removing the need to carry them on then.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44267
2015-02-05 15:41:07 +00:00
Imre Kaloz
9be491f084 mvebu: add Armada 385 DB AP support
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44266
2015-02-05 11:34:21 +00:00
Imre Kaloz
3019f7ecbd mvebu: add the Armada 385 Reference Design support
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44265
2015-02-05 11:29:56 +00:00
Imre Kaloz
40daf9346e mvebu: fix NAND and NOR options
All the boards but Mamba had wrong UBI options so far, making it impossible to
flash the built image on their respective storage medium.

Fix all of the supported boards in order to make the generated images useful.

Tested on a Mirabox, an Armada XP GP and an Openblocks AX3, and used the NAND
chip datasheet for the others.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44264
2015-02-05 11:26:17 +00:00
Imre Kaloz
f14c4e5cff mvebu: add a subprofile for boards based on a small NOR
Some boards only come with a small NOR on it, where UBI isn't a good solution
because of its overhead.

Add a new subprofile for such boards, that rely on the mtd split framework
instead.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44263
2015-02-05 11:25:21 +00:00
Imre Kaloz
e46593a54c mvebu: add large NOR sub-profile implementation
While we supported only the NAND so far, some boards use a large enough NOR,
where UBI is the only reasonable option. Create a new sub-profile template with
a different set of UBI options.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44262
2015-02-05 11:24:10 +00:00
Imre Kaloz
80cfe34291 mvebu: Add sub-profiles
In order to support the various board NAND layout that we support, introduce a
sub-profile similar to the one used by ar71xx.

These subprofiles provide a default implementation for most of the building
functions, while allowing each sub-profile to override any of these operations
in order to have a more specific behaviour, like Mamba expects for example.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44261
2015-02-05 11:22:43 +00:00
Imre Kaloz
67b91f47d6 mvebu: Add MTD split framework support
We're going to need the MTD split related options for our NOR support.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44259
2015-02-05 11:14:53 +00:00
Imre Kaloz
7be967e954 mvebu: temporary el cheapo' fan control script
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44153
2015-01-26 20:41:43 +00:00
Jo-Philipp Wich
0798de785e mvebu: add missing config symbol
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44147
2015-01-25 22:17:43 +00:00
Imre Kaloz
9a8a348f14 mvebu: use pwmfan in the profile
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44131
2015-01-25 15:52:28 +00:00
Imre Kaloz
18012a4198 mvebu: preliminary 3.19 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44130
2015-01-25 15:37:31 +00:00
Imre Kaloz
d9c6ff8c25 mvebu: gpio based pwm support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44129
2015-01-25 15:36:47 +00:00
Imre Kaloz
9a172c70eb mvebu: update mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44128
2015-01-25 15:26:33 +00:00
Imre Kaloz
afa58d8589 mvebu: backport some upstream changes
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44127
2015-01-25 15:25:14 +00:00
Imre Kaloz
8a103d5c56 mvebu: fixups for the new driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43978
2015-01-16 08:44:15 +00:00
Imre Kaloz
9a8bf84879 mvebu: add the new tlc59116 driver and migrate the Mamba to it
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43975
2015-01-15 13:59:01 +00:00
Imre Kaloz
a72bf9f3d2 mvebu: Switch to the generic mkuimage macro
The mvebu image makefile define something almost identical to the generic
implementation found in include/image.mk.

Switch to this implementation.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

SVN-Revision: 43969
2015-01-14 11:39:20 +00:00
Imre Kaloz
91b79128dc mvebu: Replace the padjffs2 call by the generic definition
The mvebu image Makefile directly calls the padjffs2 utility, while there's an
generic make function to do just that. Switch to it

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

SVN-Revision: 43968
2015-01-14 11:37:29 +00:00
Imre Kaloz
b0a2d7ad0d now that the driver knows it, use the 88e6172's switch type in the mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43945
2015-01-12 09:32:33 +00:00
Luka Perkov
a1872182bb mvsw6171: rename to 'mvsw61xx'
In preparation for properly supporting switches
beyond the 88E6171.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43935
2015-01-11 17:19:58 +00:00
Imre Kaloz
7f21a92ffa switch to 3.18
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43893
2015-01-09 12:36:07 +00:00
Imre Kaloz
26b57a6dc2 refresh kernel config, add cpuidle and cpufreq support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43855
2015-01-05 15:08:20 +00:00
Imre Kaloz
bfa1f18bfb enable swconfig and the mvsw6171 driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43854
2015-01-05 15:02:18 +00:00
Imre Kaloz
5ed3a7aeb3 add tmp421 to the device tree instead of relying on autodetect
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43825
2015-01-04 17:26:07 +00:00
Imre Kaloz
f12a0f4308 enable wpad-mini by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43801
2014-12-31 21:59:07 +00:00
Imre Kaloz
edbb903461 fix mvneta vlan tagging
This is a 3.14.x backport of:
"mvneta: Fix TSO and checksum for non-acceleration vlan traffic"

Upstream commits:

817dbfa5d1bc276a72c1a577310382008e8aca0a
2d39d120781a5770573dc6ed672a5a562f541aea

Fixes vlan tagging on SoC interfaces for the WRT1900AC.  Useful
when using mvsw6171 driver.

Signed-off-by: Mark Milburn <mark.a.milburn@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43781
2014-12-26 14:48:33 +00:00
Imre Kaloz
e23b988bf5 only call UbinizeImage and BuildSysUpgrade for boards we support them on
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43779
2014-12-26 13:45:18 +00:00
Imre Kaloz
f3755f5758 The ubinized filesystems should be used for generating the final images, so store them in KDIR instead.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43778
2014-12-26 13:33:22 +00:00
Imre Kaloz
5744500ab6 we've changed places with Luka, reflect that :)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43774
2014-12-25 22:34:15 +00:00
Imre Kaloz
2bff4ca7b1 use mwlwifi by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43773
2014-12-25 22:29:29 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Luka Perkov
a1da38f7b1 kernel: drop CONFIG_PROC_DEVICETREE in 3.18
This option was removed in upstream commit 8357041.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43607
2014-12-10 18:55:53 +00:00
Felix Fietkau
9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
Imre Kaloz
f3df3bdb26 add initial 3.18 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43366
2014-11-24 16:00:41 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Felix Fietkau
f35da063bc targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Luka Perkov
02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
Luka Perkov
dd8d729096 kernel: update 3.14 to 3.14.16
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42070
2014-08-08 13:38:22 +00:00
Luka Perkov
f548b18353 kernel: update 3.14 to 3.14.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41898
2014-07-30 15:44:44 +00:00
John Crispin
7d8f187201 target/linux/*/image/Makefile: use new dts path variable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
2014-07-21 18:42:06 +00:00
Imre Kaloz
d7ae7bae57 mark the default WRT1900AC image "factory"
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41648
2014-07-14 15:02:38 +00:00
Imre Kaloz
6f5a9debed handle sysupgrade tar files on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41647
2014-07-14 15:00:36 +00:00
Imre Kaloz
1d11ffa4f2 use the full boardname for the wrt1900ac image
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41631
2014-07-13 22:15:03 +00:00
Imre Kaloz
81d85a717a add sysupgrade support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41630
2014-07-13 22:12:56 +00:00